One of my co-workers is using excel 2000 and when she enters a formula into any cell, adjecent to a hidden row/column or not, it automaticaly unhides all hidden rows & columns. My PC does not do this. I tried to find a setting to duplicate this and have not found anything yet.
I have a macro that hides and unhides certain rows in a worksheet based on what number (1-10) is entered in a cell on that same worksheet. I have this same macro in different worksheets hiding/unhiding different rows based on this same number. So here's the problem: right now I have a number entry cell on every worksheet. I would like to only have it entered on 1 worksheet, with the rest of the macros reading the cell from that 1 worksheet.
View 11 Replies View RelatedI am looking for a formula that reads down when drug to the right.
I have two workbooks open, Workbook 1 (W1) & Workbook 2 (W2)
W1 has the following data entered in about one of our clients:
A1= Client Company Name
A2= Client Name
A3= Client Address
A4= Client Phone Number
What I would like to do is the following:
In W2, when I enter (in any cell, but let's say C3 for example) that C3 = A1 (from W1), that I can automatically have the following cells D3, E3, & F3 filled in with the same information appearing in cells A2, A3, & A4 from W1 as well.
I believe this must be possible-- I just don't know the right formula & steps to take, to make this happen.
Im using this formula in a spreedsheet =(B$3*0,5)+(B$3+(B$4*0,5))+(B$3+B$4+(B$5*0,5))+(B$3+B$4+B$5+(B$6*0,5))+(SUM(B$7:B$28)*4)
What i want is to be able to drag this down for multiple rows but i want the formula above to only change columns i.e.
Next row gets C$3 and so on.
I have a formula that I wrote in B2 and then applied vertically to a large list of rows (100+). I applied it vertically by simply double-clicking the cell with the formula, and it cleanly applied the formula to every row in Column B.
This formula now needs to be applied horizonally across columns, for each respective row. I need a way to do this in one swoop, as it would be very time consuming to manually drag each cell in column B.
I've attached a sample spreadsheet with a simple formula just for the sake of an example.
I have an Excel Sheet1
The sheet has horizontal info a list of "headers" going horizontally across row 2. So row 2 may have A2= Date, B2=Name, C3=Style, D3= ........
The header rows will vary in some cases. I want to use a formula to copy and transpose the information to Sheet2. I would like the list of headers to go vertical instead of horizontal. So A1=Date, A2-Name, A3=Style, A4= ..... all the way down.
I know about Copy -> Special -> transpose but I need something that is dynamic and simple. I know I can use the indirect function and do something like this =INDIRECT( "Sheet1!" & ADDRESS(1,2) ) . However I was trying to figure out two things. How best can I make the columns dynamic and increment up especially if I am not starting at A1? Is there a better formula to use that is not volatile like INDIRECT?
I'm working in a workbook with several sheets, the first two collums of each sheet are =to the first sheet. some times I need to insert a line, but when I did that, I need to type again all formulas or drag the previous ones, and format again the cells. is there another way to do this?
View 4 Replies View RelatedI am trying to fill in reference cells horizontally but fix the column and increasing the row number as it fills. For examples I want to start my refence as "=A1" in cell B1. I want to copy this reference horizontally to column Z1 but want the refences to be A1, A2,...,A26. Excel only seems to increase columns when filling horizontally and rows when filling vertically. Transpose works but it's an array which would slow the spreadsheet down.
View 4 Replies View RelatedI'm using a template that has formulas using a $ sign to attempt to stop the ranges they refer to changing. The problem is, when I use the template (which involes Access importing some data and adding columns to the sheet the formula refers to in the process) the rows referred to in the formula change in line with the number of rows of data that have been imported. Only the row numbers change not the column headings. So for example:
=( SUMPRODUCT(((Workings!$H$3:$H$1000=Explanation!B9)+(Workings!$E$3:$E$1000="Buy")*(Workings!$J$3:$J$1000))))-998
becomes
=(SUMPRODUCT(((Workings!$H$511:$H$1508=Explanation!B10)+(Workings!$E$511:$E$1508="Buy")*(Workings!$J$511:$J$1508))))-998
Is there a macro that I can use, that if N is entered in to column A then the whole row will be hidden and if Y is entered in, it will reappear.
Can this be done automatically without having to click a button.....
i'm trying to form a macro that allows the user to enter a date and have excel auto filter for all dates prior to (or ON and prior to if it makes it easier) that date, and delete all rows with that auto filter criteria in place. i'm working with a old auto filter macro i put together, but cant seem to get the criteria to work with, say, <7/14/2007 for example.
Attribute VB_Name = "modDeleteVal"
Sub DeleteRowByValue()
Attribute DeleteRowByValue.VB_Description = "Macro recorded 7/9/2007 by KHenzel"
Attribute DeleteRowByValue.VB_ProcData.VB_Invoke_Func = "V
14"
'
' DeleteRowByValue Macro
' Macro recorded 7/9/2007 by KHenzel
'
' Keyboard Shortcut: Ctrl+Shift+V
'
Dim rTable As Range
Dim lCol As Long
Dim vCriteria
On Error Resume Next
'Determine the table range
With Selection
If .Cells.Count > 1 Then
Set rTable = Selection
Else...
I have two columns of data as follows:
10:57:42 273
10:57:42 263
10:57:42 253
10:57:42 241
10:57:37 273
10:57:37 243
10:57:37 249
10:57:37 261
10:57:37 253
11:04:47 241
11:04:47 253
11:04:47 263
10:54:31 254
10:54:31 240
10:54:31 265.......
I have been searching the internet and forums for days now looking for and trying out macros and scripts that will automatically unhide rows once data has been entered into a cell. The data entered is a link to a cell in another sheet. Everything I have tried is close to what I am looking for but it does not quite work, and because I really don't understand the programming details, I don't know what to change in the script to make it work for my spreadsheet.
create a macro/script to do the following:
Various rows in my summary sheet will be hidden as they will probably not be used, but in the off chance that data will be displayed in them, I need them to automatically unhide. The data that might be displayed in them is a link from monthly record sheets i.e. "=Jan!F4" or "=Feb!F32"
And because I am taking data from a 12 month period, I need the rows to unhide if any data is displayed between cell range of F5:AC1705. It is a large spreadsheet of data and it is all linked to 12 other sheets.
Unfortunately, I am unable to attach the file as it is too large.
I would like to present the user with an input box asking him to enter a numerical value greater than 0.
Then I would like the code starting with row 10 and consult the vaues in column O, and only display the rows that have number in it less than or equal to the number in the input box. I was hoping it would involve a filter.
I would also need a macro to display all of the rows again.
If this is too hard, how about copying the results to a new worksheet along with the labels in row 9?
Code to enter the current date in column if the values are entered in the adjacent column's.
View 2 Replies View RelatedI am building a budget spreadsheet and would like the date to automatically populate in column H when data is entered into rows J through AN, or alternately update column H when a sum total is populated in column I
I need to repeat this for rows 4 through 63
I was trying to use the following code, but cannot get it tweaked right.
[Code] .....
Download the attachment and have a look.
I want there to ALWAYS be 5 FREE/EMPTY rows to be able to enter data into them I also want the black area around the outside to ALWAYS be a further 15 rows in height below that.
Sheet 1 = Simple Example
Sheet 2 = A much larger example
Sheet 3 = Erroneously added data should still extend the sheet by 5 rows each time.
What I am looking to do is search using a user input and select all the rows that contain the entered search text.
I have 4 sheet workbook, columns are the same across them all, and what i require is to be able to take a text input from a user, maybe what column to search, and in what sheet. Then search the relevant sheet for matches. Once found the record that contains the match is to be copied to another sheet where filters can e applied. There will be multiple records selected for each search.
I have the following code to compare two columns and delete adjacent rows if 1 is greater than or equal the other...
Sub LastReceipt_GT_Confirmed()
Dim intLstRow As Integer
For intLstRow = Range("E" & Rows.Count).End(xlUp).Row To 2 Step -1
With Range("E" & intLstRow)
If .Value > .Offset(0, 1).Value Then .EntireRow.Delete
End With
Next intLstRow
For intLstRow = Range("E" & Rows.Count).End(xlUp).Row To 2 Step -1 .............
I would like to setup a macro that brings up a dialog box asking for a date in a specific column. Once that date is entered in the dialog box, the macro would then find all rows before that date (in that specfic column) and delete them.
View 9 Replies View RelatedI have a formula in a spreadsheet that must be entered by selecting Command (Apple) and Return. This puts parentheses around the entire formula. Example: {=A1+B1}
I have it in a SUM IF formula: {=SUM(IF('Dollars'!$A$2:$A$2546=A116,IF('Dollars'!$B$2:$B$2546=B116,'Dollars'!$E$2:$E$2546)))}
If it's not entered this way, it will not work. You cannot simply hit return for the formula to work.
Since I did this so long ago (4 years), I cannot remember what it's called; why it has to be done that way and how to do the same thing in Windows Excel.
In this file i want the red coloured cells not to show zero (0) or anything unless anything else is entered in the cells above.In other words I want to hide the zero if nothing is entered above.
View 5 Replies View RelatedIn Spreadsheet A Cell H8 is entered as Item Description.
In Spreadsheet B Cell H8 is also entered as Item Description, but if the Item Description in Spreadsheet A has been changed, I need Spreadsheet B to reflect that change, if not it should stay as Item Description.
Need a formula which will allow an error message to pop up in a cell if more than 16 Characters are entered into another cell?
However, I cant put an actual limit on the characters for this cell as if another cell is populated with anything other than bacs then it can allow more than 16. Therefore my formula needs to state something like :
What formula can I use to accomplish the following, if it can be done.
If B9 is 100% all the rest of the % cell inputs would be 0%
If B9 is less 100% ,lets say 50% all the rest of the % cell inputs would be less than or equal to 50% until any sum of those cells equal to 100%
in which case if I enter 50% on B9 and 25% on D9 and 25% on F9 their total sum would be 100%.
If I try to enter a % on H9 it should not allow me to do it
because then the total sum on O9 would be more the the original amount on A9
I have a formula in one of my sheets that updates each time a new value is entered...
=INDEX('HR Reports Marco New'!BI:BI,COUNTA('HR Reports Marco New'!BI:BI),1)
The issue I'm having is that Column "BI" has an =SUM formula already in it and the formula above is going to the last value which is 0 but all the way to the end of the year when we are only in July...
There are two worksheets: Finances and Summary. On Finances, there is data input for years, quarterly. There is a cell on Summary that depends on which year is input first, in which case the cells in the formula SUM("cell1:cell4"))/4 is currently changed manually by the user by just checking to see which year data is input first on Finances. I need a macro or a formula function where the workbook finds which year is being used on Finances first, then changes the cells in the Summary formula accordingly.
View 6 Replies View RelatedI am trying to create a simple IF/THEN statement to display profit margin for an order form. I currently have the margin formula set at (1-H14/I14). How should I structure my IF/THEN, to where it displays nothing in the cells, that are empty?
View 5 Replies View RelatedBelow is the code. It seems to be creating 50 thousand rows below the data already entered in the worksheet "DELPHI DATA". What I need to do is change it to only add those formulae or pasted values to as many rows as already have data entered in them (which may eventually approach 50000, but may remain at only a few thousand.)
Sub Refresh_Current_Month() ...