Fill Formula Reference By Rows When Copying Across Columns
Dec 20, 2007
I am trying to fill in reference cells horizontally but fix the column and increasing the row number as it fills. For examples I want to start my refence as "=A1" in cell B1. I want to copy this reference horizontally to column Z1 but want the refences to be A1, A2,...,A26. Excel only seems to increase columns when filling horizontally and rows when filling vertically. Transpose works but it's an array which would slow the spreadsheet down.
I am trying to insert formulas to my cells in different columns and then fill down the formulas as many rows as in the reference column. So far I have put my formulas in a macro but I seem to get problems with " and ' symbols. My macro looks like this:
I have two workbooks open, Workbook 1 (W1) & Workbook 2 (W2)
W1 has the following data entered in about one of our clients:
A1= Client Company Name A2= Client Name A3= Client Address A4= Client Phone Number
What I would like to do is the following:
In W2, when I enter (in any cell, but let's say C3 for example) that C3 = A1 (from W1), that I can automatically have the following cells D3, E3, & F3 filled in with the same information appearing in cells A2, A3, & A4 from W1 as well.
I believe this must be possible-- I just don't know the right formula & steps to take, to make this happen.
I'm using a template that has formulas using a $ sign to attempt to stop the ranges they refer to changing. The problem is, when I use the template (which involes Access importing some data and adding columns to the sheet the formula refers to in the process) the rows referred to in the formula change in line with the number of rows of data that have been imported. Only the row numbers change not the column headings. So for example:
I would like to copy only the IF Formula without copying the cell reference. Say for example I have a formula shown below:
BEFORE A1=IF('PW216'!G7>=0.9999,0.999,'PW216'!G7)
AFTER A2=IF('PW216'!AC7>=0.9999,0.999,'PW216'!AC7)
My formula is =IF('PW216'!G7>=0.9999,0.999,'PW216'!G7) is in Red Font color. I want to copy only the formula but when I paste it, it will as well copy the cell reference.
I'm having to copy formula on a tabulation sheet that compiles information from other worksheets, and I need to change the formulas in each row to refer to the successive worksheets. Right now I don't know any other way than changing the formula in each cell, and this is taking way too long.
Example:
One cell's formula: =COUNTIF('5'!$F$21:$T$50,TABULATION!C$5) In the next row down, I need it be: =COUNTIF('6'!$F$21:$T$50,TABULATION!C$5), then =COUNTIF('7'!$F$21:$T$50,TABULATION!C$5), and so on.
Is it possible to copy a formula and have the worksheet name increase incrementally instead of the cell reference? Example: In column A, I have the following -
I want to copy this across to column B, but instead of just copying that exact foruma across I am wanting a formula that will update the worksheet reference to:
TDI_SR_F_2 is the worksheet after TDI_SR_F_1. NB - I cant use find and replace function as it will change the '1' which is part of the cell reference ($G$1) to a 2 as well. I know I can use TDI_SR_F_3 as a search string, but the process is going to be extremely tedious, i.e. there are literally over 100 rows I need to do the find and replace on.
If I want to change only A7 to A8, A9, A10 without changing the other parts of the formula, how do I do that. I need to copy this formula in about 300 rows.
I am trying to cut/paste a row of formulas in my spreadsheet. The problem is that I want some of the referenced cells in the formula to stay CONSTANT and not increment on each new row. In this example, I want the references to row 17 (F17,E17) to increment (E18,E19,...), but I want the "G7" reference to remain hard coded (as G7) on each row I paste (because that is where my master value is). (The formula is working fine) =IF((F17>0),IF((F17<=G7),E17,0),0)
I have a spreadsheet with temperature data, all in one column (D), that was recorded every 10 minutes for several months. In two adjacent columns (E & F), I would like to record the daily max and min temperatures. I can manually do this with MAX and MIN formulas in column E and F respectively, MAX(D1:D144). But when I copy this formula to the next row, I get MAX(D2:D145) when what I really want is MAX(D145:D288)....and so on...
I have a pivot table full of data that needs a macro/vba/something to loop through it and hide all rows that have no fill color. The table had 210 rows so I want a quick way of hiding the irrelevant ones (only the ones filled in green or red), and so all the ones with no fill need to be hidden. Something like a button to hide/unhode would be ideal.
I want to write a macro to fill color in row 8 of the worksheet as solid black . Also columns P,T,AP,BC ,BE and BG should be filled solid black and width should be 1 for the row and the column.
How do you make the Autofill function increment in blocks, e.g. instead of increment 1,2,3 increment 1,8,15 inthe following example: I have a 2 worksheets, one with days of the year across columns and values down rows, and another that summarises the sum of the corresponding days in weeks, so I have 365 columns in sheet 1 and 52 columns in sheet2. Everytime I update the sum range i cannot autofill it in the summary worksheet, as A1:G1 autofills to B1:H1, but I want it to increment to H1:N1.
dear friend in my document column "L" has some numbers & formulas.if any cell has formula base in that i need to inset rows below that formula cell & that formula need to spread on that new rows.i have 4 type of formulas.each formula has (1.5).that part is common. it 's like this...
(01.)ex- L1 cell =150*2*1.5 ,need to inset one row below this cell & after running the macro it should change like this.. L1 cell =150*1.5 L2 cell =150*1.5
(02.)ex- L1 cell =150*2*1.5+50*1.5 ,need to inset two rows below this cell & after running the macro it should change like this.. L1 cell =150*1.5 L2 cell =150*1.5 L3 cell =50*1.5
(03.)ex- L1 cell =150*2*1.5+130*3*1.5 ,need to inset four rows below this cell & after running the macro it should change like this.. L1 cell =150*1.5 L2 cell =150*1.5 L3 cell =130*1.5 L4 cell =130*1.5 L5 cell =130*1.5
(04.)ex- L1 cell =150*2*1.5+130*3*1.5+20*1.5 ,need to inset five rows below this cell & after running the macro it should change like this..
I need to take a list of about 1,500 rows of data (single column) and convert it into columns of 9 entries. I know that I can select nine rows and then paste using transpose... But any way of "automating" the process?
So, I have a document 25 pages long. It has 26 sections (1-26) and each section has up to 10 (.1 - .10) sub sections which contain 16 (a-p) sub-sub-sections. There are 6 columns of varying widths. Some cells, in a row, merge into adjacent cells.
I would like to break this document into 26 documents - one for each section - so that I may recombine and regroup them in the future incorporating a few modifications. Whenever I copy and paste to a new Workbook, I loose the formatting of column widths. Resetting these alone takes lots of time.
I have come up with is to duplicate the entire document and delete everything above and below the section I would like to save. Then repeat for next section. There's got to be a better way?
Why does my macro mess up on second line C23 and not places Play Equipment or the amount in the right column it stays on row C22
[URL]....
Code:
Private Sub CommandButton1_Click() Dim SheetName As String SheetName = "Estimate1" SheetName = InputBox("enter the name of a sheet to use", "sheet name", SheetName)
If I have formulas in A1, A5, A19, and A36, highlight them with goto, how do I move them into B1, B5, B19, and B36? Copying and pasting puts them in B1, B2, B3, and B4.
Data file with few columns. There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
I want to fill an array from values in range A1:H10. I want to fill the array with all rows in range and only columns B,C and E. I have the code below so far using index function.
Is there a more direct way to select all rows from desired range to avoid the need to create an array of rows from 1 to LastRow and then use Application.Transpose(RowsArr) (in red) inside Index()?
I am a locksmith and attempting to write a spreadsheet app. for my line of work. The output page will use columns A-G and rows 1-?10000? depending on the size of the system. If a 5 pin system is requested then columns A+B will be blacked out. 6 pin system A is blacked out. 7 pin system nothing blacked out. Also, if any cell matches the master key that was input, that cell is filled with red. I know, confusing.
Basically, I am trying to remove the blacked out columns automatically, and to remove the enitire row is any cell in that row is filled with red. Then to remove blank lines.
I need something that will take data from columns in one Spreadsheet and put in difference cells in a row. I know this could be done with recording a macro but the number of column will never be constant.
Below I attached examples of the Spreadsheet
Financials SpreadSheet Need to have the data in column B to F put their respective cells in row in the Master Spreadsheet So we would have 5 rows.
I want to be able to reference cells in a table by using two drop down lists. One drop down for the columns in the table and another drop down for the rows in the table. The values in the columns will be different metal materials (aluminum, copper, stainless steel, etc.). The values in the rows will be thicknesses of those materials (1/16", 1/8", 1/4",3/16",3/8",1/2",3/4",1"). I already created a drop down list for the materials and another for the thicknesses. But now I want to be able to select a particular material and then a particular thickness and receive back in another cell a value that's cross referenced in a table. Specifically, the values in the table will be the weight of the particular material and thickness per square foot. I'll populate all of the cells in the reference table manually. I'll hide the table on a separate worksheet. i haven't created the table yet.
combining multiple rows of related data into one row but have not seen one that matches my situation. My experience level with excel only includes some basics like vlookup, match and recorded macros, although I have used vba code for a macro that met my needs. I have a parts list for a PCB that has many different parts. Some of the parts are used multiple times across different reference designations("Reference" column in the file). I have shown a desired format and the original format below. Since the item number has blanks across the reference designators I haven't found a solution that would work for me.
