I have a main soure data which consist of row & column information. What i want to do is search the data from the source data into my result data as per the attachment file. Example: I want to information of Jan & banana from the main source file to appear in the XXXX
Result data(criteria base on Month & type)
JanApril
BananaXXXX
Apple
Orange
I have 2 columns of data in Excel which I have brought a small section of it below. As can be seen the values in the left column have a large spike (difference of more than 10) at certain points (in this case at 34). I wan to find the average of the numbers in the right column but only till the point where the large spike happens (in this case the average of the first 5 numbers). I've tried AVERAGEIF but it's not what I want. I want this to repeat for the entire column and give me the averages of each of these groups.
10
32.4
11
38.6
12.5
23
[Code] .........
This formula allows me to find the lowest value in column U where column N contains the text "NO".
{=MIN(IF($N$2:$N$10000="NO",$U$2:$U$10000))}
I want to add another condition so that the formula only returns the lowest value in column U where (i) column N contains the text "NO" and also (ii) column F contains the text "YES".
Any quick way to extract data from a table. I need to extract a value from a column that meets criteria from two different columns. I thought I could get this to work with vlookup, but have had no success. Sample data below in table 1 and I would like to get my data into table 2.
elevation
type
grade
percent
weight
5000
5000
5000
5020
[Code] ..........
In my table I want to create a user form where the individual would enter a number which would correspond for the Header Row.
and
The user would also enter a Number that would correspond for the first main column (Column B).
Based on the numbers entered, I want to find the next highest number.
For example if 61 is entered 66 would be chosen.
-Same would be for the numbers entered to find the column.
Based on the numbers entered I would like to find the intersecting cell.
Basic code I can embed in a user form?
I need to be able to find a value in another sheet based on 2 criteria
The criteria is a number from a column on my first sheet where the results will reside, the second criteria is based on a fiscal year (calculated based on the year of the current year).
The formula I use is as follow:
=LOOKUP(BA2,Budgets!B:B,Budgets!I:I)
and this is what I use to get the column:
=+INDEX(Budgets!B11:B200,MATCH(Budgets!B11:B200,Budgets!B11:AB200,0),3) getting #N/A here
and I use this too:
=MATCH(IF(MONTH(TODAY()) < 7,YEAR(TODAY()),YEAR(TODAY())+1),Budgets!E:Q) getting #N/A here too
If i keep it like that no problems but I will need to change the criteria 2 every new fiscal year.....
What I need is to replace the criteria 2 with something that will find the proper column wher the data is the fiscal year is listed on E11:Q11..
I have tried index and match and quite frankly, I never made it work, always getting an error.
Here is the situation:
There is a spreadsheet that I use that has multiple plans in one column for various members. You can see the plan for Robert James and Amanda James is plan 5. If all this information was in column A how would you move the plan type say column C for each member?
For example
Column A
Customer Name
Robert James
Amanda James
Plan 5
Nikki Martinez
James Gross
Plan 6
What I am attempting to do is find the MIN value in Column C where values in Column A are equal.
The data would look like this
A B C D (D:D is where the "MIN" Formula will be)
Scope1 NameA $100
Scope1 NameB $145
Scope1 NameC $115 $100 (I want the min value to show up here)
- (this would trigger a break between scopes, and provide a conditional format separator)
Scope2 NameE $450
Scope2 NameG $345
Scope2 NameX $415 $345
-
So every time I put a "-" I would like the MIN formula to trigger in (Row#-1,D)
here is a sample of the data
150
21
352
422
53
69
755
852
1224
13268
119
242
30
444
543
67.................
I know if I use dmax for only where first column equals 13 I get 460 but how do I get the second highest value for only those rows that have 13 in the first column (expect the answer to be 268). Then I want to do the same for 3rd, 4th highest etc.
I know large does it for one column and not only when the first column matches a designated criteria.
I need to look at column B find anything that Starts with BBX (ie; BBX124343, BBX1348383 ) and move it at the same location only to column A
I have excel sheet with 4 worksheets tabs(Master, Won, Lost, No Bid). All data entered on Master. I want each row to automatically link/appear on 2nd, 3rd or 4th worksheet tab based on info in column Q (Result) which would be either 'Pending' - in which case it would stay on Master, 'Won' - would stay and copy to Won worksheet, 'Lost' - would stay andcopy to Lost worksheet, 'No Bid' - would stay and copy to No Bid worksheet. All rows would always show up on Master worksheet.
View 1 Replies View RelatedI've attached a workbook with a description of what I'm trying to do. I'm not sure if it can be done with formulas or if it will require VBA. I can move it to the VBA section if the latter terms out to be the case. it's not that I'm opposed to copying code, I just like to know how it works with enough depth that I can fix/modify it, and I can't do that with VBA).
View 6 Replies View RelatedI am trying to find the top two values per group based on multiple criteria. The list I'm working with is not sorted and would be better for it to not have to be sorted as on-the-fly sorts will likely often occur from the raw data and I wouldn't want that to mess up the results I'm looking for here.
As an Example, here's what I'm trying to do:
Make Model Rating
Ford Bronco 64
Chevy Corvette 94
Dodge Intrepid 83
Chevy Chevette 34
Dodge Viper 72
Ford Escape 21
Ford Expidition 53
Chevy Impala 67
Ford Fairmont 11
Dodge Dart 33
i have with noting the most recent date of a test and also the one prior to the most recent dependant on location and test type. I require most recent and previous test info to enable a comparrison to be made. All other dates are not required but need to be kept as historical data and can't be deleted.
Is there anyway i could get column E to auto populate and amend itself as more test dates and locations are added to the list?
I need to copy all the work sheets into one single work sheet (mastersheet). The source work sheets are having same column structure. The condition which i need to take care of is that after column 3 if at all there is any data till column 10 then in the destination mastersheet these should be copied in different rows with first two columns repeated. I need to do this using VBA macro.
View 9 Replies View RelatedExcel 2007. I have an Excel file that contains a data dump from an external database file with numerous analytical sheets that perform calculations. Some of these calculations utilize the SUMIFs function that was introduced in Excel 2007. This function does an outstanding job of summing a column on the data sheet based on multiple criteria.
However, someone high up in management in my organization would like to "drill down" into the data behind the
SUMIFs formulas to get a quick snapshot of the lines in the database that roll into the
SUMIFs formula. =SUMIFS(DataBase!E:E,Data!A:A,C7,DataBase!B:B,D7,DataBase!C:C,E7,DataBase!D:D,F7)
If I double click on a cell with the formula above, Excel takes me to the Database tab and selects Column E which is close, but not exactly what I need. What I really need is for Excel to only show the rows on the database sheet that make up the total in the SUMIFs formula and not the entire data dump from the database.
At present, we have to manually apply the autofilter on multiple columns to show the rows in column E that make up the total in the SUMIFs formula which is a tedious and time consuming task. Is there a way to force Excel to do this? Suggested custom database application or pivot tables, but we do not want to reinvent the wheel.
I have a workbook with many sheets of similar but not identical data. I need to extract columns from each sheet based on 5 header criteria and paste them to a single sheet. Each worksheet contains these 5 criteria.
I've been working with the VBA script I've pasted below. It's grabbing the 5 column criteria that I have in sheet 12, and comparing them to sheet 1 in the workbook, then copying them to sheet 12. This much is good, but I need the script to also return the data from the other worksheets as well. I've tried modifying the script based on other loop functions in other scripts I've found, but I'm not having any luck.
have two worksheets. sheet1 has order information on it with orders, dates, customer names. sheet2 has customer name list. How can I (via vba) search through the order sheet and find the most recent order date for each customer in the customer name list. post that most recent date next to the customer name on sheet2.
View 4 Replies View RelatedI'm looping through and finding a cell based on Column A, and I .resize(,5).select and from that selection I want to create a range called "LCrng"
This should be simple to do but I can't figure it out. I have a database that lists operating room numbers in one column and the length of the surgeries performed in those rooms in another column.
I need a formula that will give me the longest OR time for a given room. For example the room numbers are in column A and the OR times are in Column B. I've tried something like
I am attempting to update a column of numeric values based on finding and validating record IDs in two different worksheets. So for example if in worksheet1 in column 'C' the ID is 1234ETC and in worksheet2 1234ETC is found then I want to update worksheet2 in the corresponding cell for that record ID in column 'J' with the information from worksheet 1. So far I have been using a routine like the following to go through and compare the ID's but now I need to update the other cells in column 'J' reveiw the following and see if there is a way to improve upon this.
Sub UpdateCommitmentAmtsFromImport()
Application.ScreenUpdating = False
Dim bottomC1 As Integer
[Code]....
i m trying to use the sumproduct formula, and OR but i cannot seem to get this right! =Sumproduct(--(A1:A10="Yes"),--(OR(B1:B10="Yes",B1:B10="Mayby")),C1:C10)
I have also tried Array Formula as follows; {=SUM(IF(A1:A10="Yes",IF(OR(B1:B10="Yes",B1:B10="Mayby"),C1:C10)))}
I have also used UDF to for the sumproduct, but cannot make that work! keep giving me value message
Function
Function Customer(Service as Range, Outcome as String, Service2 as Range, Outcome2 as String)
Customer = Sumproduct(--(Service = Outcome),--(Service2 = Outcome2), Result)
-Didnt get thru this bit to start building on the Function! keep giving me #Value!
I have the following sample data set and I'm trying to return the appropriate column header based on criteria (i.e. DDD) and a number value which will be somewhere within the range of the table. In example below, the value returned should be Header 2 because the value is greater than those in Header 1 column (range H9 to L26).
Here's data table:
CriteriaHeader 1Header 2Header 3Header 4
ZZZ5.0015.0050.00130.00
ZZ5.0015.0050.00130.00
Z5.0015.0050.00130.00
YYY5.0015.0050.00130.00
YY5.0015.0050.00130.00
Y5.0015.0050.00130.00
DDD5.0015.0050.00130.00
DD5.0015.0025.0075.00
D5.0015.0020.0065.00
RRR5.0015.0015.0045.00
RR2.5010.0010.0030.00
R1.503.0010.0025.00
UUU0.751.505.0020.00
UU0.751.505.0020.00
U0.751.505.0020.00
P0.751.505.0020.00
T0.100.105.0018.00
CriteriaNumberValue
DDD10.00Header 1>>>=INDEX($I$9:$L$9,MATCH(I29,INDEX($I$10:$L$26,MATCH(H29,$H$10:$H$26),)))
I have two columns. Column A had numbers and column B has names. I need a count from column A for each name in column B.
View 1 Replies View RelatedI have a table (Sheet 1) with four columns data, A,B,C and D. There are about 60,000 entries in them. In Sheet 2, I wish to enter a value in A1 which will be from A OR C columns of Sheet1 and get its corresponding value from B or D (Sheet1) in B1 (Sheet2) with the help of a formula. i.e. IF(A1, Sheet1!A60000:C60000, then B1 = B or D of Sheet1).
View 2 Replies View RelatedI have the following code. Is there any way to select a range once the last cell with data is found. I would like to be able to select whatever cell in column A is selected with the code below through E2.
View 4 Replies View RelatedIf i have the following layout of data
Column 1 Column 2
January 1000
January 1234
February 1300
March 1600
January 15
March 123
April 234
January 3000
I would like a formula that adds all the January numbers together returning a result of 5249
To move this one step further i would eventually need to add these numbers based on quarters, for example if the value is January February or March in column 1 then add the numbers in column 2.
I'm sure i have done this before using a countifs maybe but my mind has drawn a blank
I am trying to get an average from one column based upon criteria from an adjacent column. The number of days to close a case for race columns Black and White are listed in B5:C16 and E5:F16 and H5:I16. I need a formula to calculate the average days taken to close cases for Males and then the same for Females. Sample below: ...
View 12 Replies View RelatedI have an personnel file with employee info, and I want to create a macro that will look in the "Master" worksheet at the Department column ("I") for anyone in Benefits, and then copy their name from the Name column ("D") into the "Benefits" worksheet. The names should begin pasting in cell "D3" but will recognize if a cell already has a name in it and then paste in the cell below that.
Here is what I have:
Option Explicit
Public Sub RatingbyDept()
Dim Dept As Range
With Sheets("Master")
For Each Dept In .Range("I2:I1000")
With Dept
I keep getting error 92 - "For loop not initialized".
Is it possible to have a marco that will look at the data in a cell/multiple cells and search a network drive for a folder named with the same data in a cell? For example, I used a marco to create a folder from the contents in cell A2. Can a macro be reversed in that if I have a spreadsheet with a list of data in A2,A3, A4 and so on, can it check a network drive to see if a folder has been created with the same data?
View 10 Replies View Related
