I am looking to have the data ranges in tab 'Type' update automatically in 'Output' for a particular start date. So for example if I enter LBO into cell E3 in the 'Output' tab it will input the data range for LBO from tab 'Type' but from a specific start date.
I know I can achieve part of this via LookUp functions but it is the start date that has me stumped.
I need some assistance taking dates entered in a userform and applying them to the sheet 'Completed_Report' cells Q1 and R1. The userform code that stores the input values is:
View 2 Replies View RelatedI have an excel sheet where I would like a user to enter a start date and end date(say Feb 1, 2013 to Feb 28,2013). And these dates will be able to change to whatever month the user wishes to look up in a specific date range(column A has 365+ dates). This post is closely related to [URL]... but I cannot figure out how to get it to work from my case.
So working off the same worksheet, I have the beginning date in AC35 and the end date in AC36 in which the user enters. I would like the dates that fall in this entire month, including the beginning and ending dates to be referenced when looking for the specific day that contains a value I have in S35.
In other words, I have data in columns A through N. The dates are in column A and S35 is a value obtained from using Max(L185:L526) where L185:L185 is manually selected each time I want a different month. I don't want this to be a manual process of scrolling down the spreadsheet to get the next month.
can anyone help me how to create a macro which will copy range of data based on a criteria? I have a worksheet which contains dates on column C rows C30:C64, dates would start from march 29 to may 2. how can I copy the range of data from April 1 to April 30? the criteria which will be copied will always be the start of the of the month up to the end of the month...meaning if the dates placed is like April 26 to June 6, it would automatically extract the range for May 1 to May 31 and place this on another sheet.
View 6 Replies View RelatedI have a worksheet with 300 rows and I have a separate worksheet that contains graphs based on the data in the 300 rows.
The data is continually updated but stays at 300 rows. I add a new row at 301 and then I delete row 1.
I set the graphs up with a Chart Data Range of =GData!$B$1:$AB$300
As I add and delete rows the Chart Data Range reduces so after adding and deleting 3 rows the Chart Data Range is now =GData!$B$1:$AB$297
How can I get the Chart Data Range to stay at =GData!$B$1:$AB$300?
I need to compute the no. of days between start and end dates and spread no. of days on each month. I've attached a spreadsheet with examples and further explanation.
View 3 Replies View RelatedI have some Start & End dates with some values. Based on lookup dates I like to get third column values.
Start Date
End Date
Places
Jul 1 2011
Jul 25 2011
A
Jul 5 2011
Aug 25 2011
B
Jul 7 2001
Jul 15 2011
C
Jun 29 2011
Jul 5 2012
D
A2:A5 Start Dates
B2:B5 End Dates
C2:C5 Places
E2:E3 is lookup dates, Jul 6 2011 & Jul 7 2011
So return values from column C fall under these dates.
Answer is A, B, C
I tried this formula
=IFERROR(INDEX(C:C,SMALL(IF(MMULT(ISNUMBER(MATCH(A$2:B$5,ROW(INDIRECT(E$2&":"&E$3)),0))+0,{1;1}),ROW(C$2:C$5)),ROW(A1))),"")
But this wouldn't work as expected. Only return C. I am using excel 2007.
I want, based on a given date let's say 6 months ago from today (03/01/09), a formula that tells me the name of the person that finished Between the started and the GIVEN date (03/01/09). The result should be: Name2
I can also use a formula that shows, condition results such as: True..."OK", false "out of range".
I have a list of employees and the dates on which they were absence from work for a set period (i.e. one month). Some employees have been off for a day, some for longer. This data has been pulled from a large datasheet and now needs formatting to add in the start and end dates of absence, ready to upload to a payroll system.
The Problem:
I have been able to get a macro working on a simple list of names, however the problem arrises where I have 2 employees off on the same day - I was using a loop to find the date last used, but this no longer works.
My Request:
A copy of the worksheet in question can be found here : http://www.carpe-luna.com/other/AbsenceQueryHelp.xls
But I'll try and describe the layout as much as possible
This is how my raw data is set up. (Up to row 50 but potentially more)
A.........B...........C..............D...........E.........F
EmpNo.....EmpName.....Start Date.....End Date....NoDays....NoHours
612.......Paul........26/01/07.............................12......
612.......Paul........27/01/07.............................12......
615.......Ian.........27/01/07.............................12......
758.......Peter.......16/01/07.............................12......
758.......Peter.......17/01/07.............................12......
758.......Peter.......18/01/07.............................12......
...........................................
setting the dates so that they update by 30 days once they have passed.
For example I need a cell that has an upcoming date to add 30 days to it once it has reached the upcoming date, so it is April 4th today, and I need it to change a cell that reads 'April 14th' to 'May 14th' once it is April 14th.
i am trying to both identify the start date and the end date of a series in excel.
if you will, picture a spreadsheet with two rows with data. the top row is comprised of dates in mm/dd/yy (end of month) format. the bottom line is percentages . . . a corresponding % for each date directly above. these percentages add to 100%. in two separate formulas, I would like to identify:
1. the date in which the first %>0 occurs (start date)
2. the date in which the cumulative addition of all months %'s equate to 100% or the date in which the last %>0 occurs (end date)
keep in mind many if not most of the %'s will be 0%.
Running reports with start and end dates, example I need dates to Start 10/01/2010 and end date of 09/30/2011, retrieved date has some dates before 10/01/2010 so I need a formula to change that date to equal 10/01/2010 and the same for the end date need to have that date change to 09/30/2011.
View 3 Replies View RelatedI am trying to automate calculation of IRR for a range of scenarios.
I have a bunch of problems with this:
1. On a full cycle basis, the project start dates are not equal which means that in certain scenarios I get 0% return as the first cash flow is zero.
2. On a point forward basis, negative cash flows may start after T0 (i.e. now)
I have circumvented this on NPV basis by using a Sumproduct of individual cashflows, discount factors (full cycle cashflows are inflated to T0) and a proportional period factor (where T
I have searched for a 'simple' solution to this but I only ever seem to find complex and indepth examples.
I summarise web hit information then chart it so I can look for trendlines. I get good info from the stat company so I can see where folk are coming from, search engine, weblink etc etc.
Once I have summarized it I have date running along the column headers then it is broken down through the rows so I have
Total Hits
Total Paid Advertising
Total Search Engine
And so on for my rows
As the days go on the data gets harder and harder to read so I was hoping I could use some kind of OFFSET function to select my data. So if my dates run from 2/11/07 to today I would like to perhaps say to Excel that I might want to see 20/11/07 to 20/12/07 in my chart.
I have plenty space to put the start and end date and I have a basic block of data.
How do you subtract start/end - dates/times in vba?
I know how to do it with formulas, but can't grasp it with vba. My range will always change, so I'm trying to avoid formulas (Cutting rows etc...)
I need Col D-Col B (end date-start date) and Col E - Col C (end time - start time)
Would doing the calculation on the userform be the best way, or trying to do the calculation with the ws code?
I have a table where I assigned Months (Jan-Dec), Current Month YTD (e.g. Nov YTD) and Dec YTD in the column field. Company Name and Year in rows.
For a particular company for example, Co.AAA. The Start Date is Oct 1, 2009 and the contract will end on Sep 30, 2014.
If my current reporting month is Nov 2013, From the table, I need to get the sum up the data that correspond from this dates inclusive in start and end date of Co.AAA.
Inclusive Dates are:
Dec YTD 2013
Dec YTD 2012
Dec YTD 2011
Dec YTD 2010
Dec 2009
Nov 2009
Oct 2009
If this is not possible, what other solution I can use to get the correct number?
i had a worksheet with the dates in Column A.I want to return the dates that fall between the two dates (Start_date- Column B-List of Dates) & (End_date Column C-List of Dates) in Column D.I had been trying with this but could not find a function to return the dates.
I tried using the filter >> Custom Filter >>>.Got the result.But i want to know the formula for the same.
if A1 is a start date and B1 is the end date, I want C1 to return the number of months there are between the start and end dates?
View 9 Replies View RelatedThe company I work for does not use the usual calendar dates and uses a modified calendar. As an example, the month of January is Dec 31 thru Jan 27, February is Jan 28 thru Feb 24 and so on. I need to group data using a pivot table and summarize data by month, but as I just described above, calendar months will not work. Is there a way to modify what Excel sees as monthly dates?
View 9 Replies View RelatedI have been trying to search for either a function or VBA that will perform the following:
If I enter I want all months >=1/1/07 and <=3/31/07 it would tell me that the months in between are January, February and March and so on with all dates.
test.xlsx
I need to calculate the time elapsed between start and finish dates. I've figured the TODAY function, as explained here but I'm referring solely to dates in cells. How to?
Check the attached sample file
a. actual data in columns is approx 150 items (that is why i need to hide/unhide columns)
b. there are about 120 persons whom above items are issued depending on expiry of life of item i.e. issue date plus number of months mentioned in row 3. for example if coat was issued to John on 5th Jan then it's life expires on 5th May and so on.
Now what i want
1. by clicking hide checkbox only that specific column should hide or if i click Hide All check box all column in range should hide.
2. as i enter issue date expiry of that item should automatically update on corresponding month sheet i.e for above example 5th May should automatically get entered in sheet May.
I have entered sample data manually in months sheet.
aJITCBP.xlsm
I'm trying to combine monthly calculations with "today" and with "workdays"
Example:
start date = 01/01/2009
today's date 09/16/2009
formula result = 10/01/2009 ; or if 10/01/2009 is a Sunday, result = 09/29/2009 (not 02/01/2009, 03/01/2009, etc)
=edate gives me a month but it doesn't skip weekends or calculate beyond today's date
I need the VBA/UDF to produce a column of dates between a start date and end date, excluding Sundays.
I can see lots, excluding weekends, but very little for just Sundays.
Is there any way of writing a macro so that specific cells are formatted to start with a capital letter and end with a full stop. Can you also write a macro to automatically spell check specific cells?
View 11 Replies View RelatedI have a delivery time programm (clients to be delivered the next day) which I would like to run every night at a specific time. Is there any MS tool to trigger the Excel file? Or do we have to use the "old" batch file ( if yes, pls send example)?
View 2 Replies View RelatedI am importing data that contains specific start dates and I was wondering how to filter the criteria in Microsoft query to only show start dates greater than today or perhaps yesterday. This would eliminate all entries that have already occurred. It seems I can only select a date in the criteria that exists in the data.
View 14 Replies View RelatedI am trying to set up a spreadsheet which automatically calculates the start and end dates of project tasks, by looking at the order in which tasks need to be completed. I have attached a spreadsheet to show what I am trying to do.
View 3 Replies View RelatedI have 2 dates+ times.
1 the contract start date and time.
2 the contract end date and time.
Can I calculate the number of working hours between these two using a formula?
So if I have a 10 hour working day (08:00-18:00), Mon-Fri and the two Dates/Times can I calculate the number of working hours?
Example
Start 06-Mar-07 10:00
End 14-Mar-07 14:00
This is 2 part days and over a weekend.
I have a list of dates in this format (7/20/2013) that go through several months. I would like to make have a formula that takes all of the dates from a specific month out and make a new list of those days. For example, if I have 7/20/2013, 6/28/2013, 8/3/2013, 7/1/2013. I would like to to take only the dates from July and put them in a new list: 7/20/2013, 7/1/2013.
View 3 Replies View Related
