How do you subtract start/end - dates/times in vba?
I know how to do it with formulas, but can't grasp it with vba. My range will always change, so I'm trying to avoid formulas (Cutting rows etc...)
I need Col D-Col B (end date-start date) and Col E - Col C (end time - start time)
Would doing the calculation on the userform be the best way, or trying to do the calculation with the ws code?
I have a table that I am storing into an array. I have an array FDate where I store a date and another array FTime where I store times.
FDate is formatted as m/dd/yyyy Hh:Mm: Ss
Ftime is formatted as Hh:Mm:Ss
I know in excel that you can add and subtract dates and times. How do you accomplish the same task in VBA?
I have 2 dates+ times.
1 the contract start date and time.
2 the contract end date and time.
Can I calculate the number of working hours between these two using a formula?
So if I have a 10 hour working day (08:00-18:00), Mon-Fri and the two Dates/Times can I calculate the number of working hours?
Example
Start 06-Mar-07 10:00
End 14-Mar-07 14:00
This is 2 part days and over a weekend.
I need a formula in excel to convert start times and end times and minus out lunch time taken and then give total hours worked. For instance,
Column D Column E Column F Column G
Start End Lunch Total Hours Worked
10:01AM 7:08PM 1:01 (formula to convert hours worked)
In the same period of time I have two countings of different stopped time.
sheetA
range (A3:A23), = product code.
range (H3:H23), = time used.
with this formula I take the time used for each product. "= SUMIF($A$3:$A$23,M2,$H$3:$H$23)"
sheetB
On this one I record all different lost times in the same period of time.
What I want is:
Take out from the result obtained with the above formula, the time down from SheetB.
Ex:if I used on sheetA between 7:00 and 18:00, 4:10 of the product A, I want to take to this value the downtime in the same period from sheetB.
I am trying to subtract from a collumn 14 seconds from the time that is in the cell. I do not want to manually enter in a formula, or copy and forula into the cell as there is a large amount of data for this. The report will be updated daily and will need to always subtract 14 seconds from the time, and the result should be populated in the cells that the time is subtracting from.
View 6 Replies View RelatedI'm trying to subtract two times to get the difference. Entries are in military format (1615) and VBA converts the time to 16:15. My problem is that when a time is entered between 0001 and 0059 (i.e. 0015), the VBA converts the time to :15. My formula does not recognize this, but does recognize 0:15 (entered without VBA). The cell is custom formatted as h:mm. I've tried several other formats including [h]:mm but can't get any to work. How can I get a formula to recognize it?
=IF(U12<T12,(U12+1)-T12,U12-T12)
where U12 is :15 and T12 is 23:00
I get a spreadsheet downloaded to excel with a variable of 15 names.
I want to create a formula that if the name Cleardale appears to take the time responding in cell BD and subtract it from the time available in cell AV so that I have the time on task and then to add up all those times in a total time on task for all cleardale listings for that day. The times are listed in the 24 hour format. I keep getting errors. Can anyone help me out on this one? The range of the cells is from AV7 to AV500 for available time and BD7 to BD500 for alert time and the range of the names is cell f7 to f500.
I have created a userdefined function. the Idea is for the user to calculate the difference in hours and minutes. The input would be like budtime = 30 , realtime = 1.25 the answer I would like to have is 28:45 (28hours and 45 mins). Im aware that I can format the cell manually with [h]:mm but I'd like the function to do it.
I have written this:
Function RT(BudTime, RealTime)
RT = Format(((CDec(BudTime) - CDec(RealTime) / 24)), "[h]:mm")
End Function
I have a data which has a start time, end time, Stay Time(End-Start) and # of subjects. I am trying to create a graph, line, bar or histogram which shows how many subjects were there at a specific time. So the horizontal axis would have time from 00:00 to 24:00 and vertical axis would have the total # of subjects or the %.
Start End Subject Stay
01:00 02:00 1 01:00
01:00 01:45 1 00:45
02:00 21:00 1 19:00
03:10 14:10 1 11:00
The data set is huge(27000 rows) and I am using excel to create a graph.
I have tried using line plots and bar charts(stacked) but couldn't. I am not sure if there is an easier way to do it .
id like a formula that enter "1" into a field if i start after 00:00 and before 03:59 am
so in d4 is my start time and M4 is where i want the formula to go
i tried this formula but did not work
=if(d4>="00:00",<"04:00",1,0)
Trying to get times worked in hours and mins, from a given start time to a given finished time.
I would like H18 to read 14
and H19 to read 13.5 and so on,
H23 and H24 are full 24 hour coverage,
but i get a 0, when using 08:00 - 08:00
as we only deal with a full or half hours, the figures should read whole numbers or half number as in th example above.
Also would like to total all hours worked in H28 to 117 as opposed to the figure given in the attached file.
DAY / DATESTARTENDHOURS
MON22-May200618:008:00 AM14:00
TUE23-May200617:006:30 AM13:30
WED24-May200617:307:30 AM14:00
THU25-May200618:007:30 AM13:30
FRI26-May200618:008:00 AM14:00
SAT27-May20068:008:00 AM0:00
SUN28-May20068:008:00 AM0:00
TOTAL2.875
Couldnt upload the file as it was 75kbs, a
Seems that when I subtract a future date from NOW() and format the cell d:hh:mm that the result is 1 day off. So if I subtract NOW() (today is 10/24) from 10/25/08 it returns a 1 for the d when I would expect it to be zero.
View 14 Replies View RelatedI have 2 cells in a row that are times, it has been a while since I did any work in excel. I want to take the first cell as start Time, the second cell is end time and I need to subtract them and put the total in a cell called Hours. What is the correct format to use and how would I do the subtraction.
Generally start time will be AM and End Time will be PM.
I have a column with start date and another next to it with end date. I now want a third column that gives the number of days alloted. I tried
=G6-F6 and that didn't work. What should I do?
I have a user form with textBox1 = start time (entered as "[h]:mm") and text Box2 = finish time (entered as "[h]:mm"). I would like textBox3 to display the difference between the start time and finish time as a general number!
For example
Start time: 21:00
Finish time: 06:30
Hours worked: 9.50
Start time: 12:30
Finish time: 23:00
Hours worked: 10.50
I am attempting to create a datasheet to track the actual time an agent takes a break or lunch. Here is an example of the data that I am using.
name Date Lunch Sch Brk1 Sch Brk 2 Actual Time
BrandonHolt8/19/201411:10 8:30 1:20 8:24:20 Break
BrandonHolt8/19/201411:10 8:30 1:20 11:42:34 Break
BrandonHolt8/19/201411:10 8:30 1:20 12:57:46 Lunch
Because I have two break times, possibility of more depending on the agent, how do i create a formula that will look at this data, take the schedule time for say break one and only apply that against the time that is more in line with the closest actual time?
I'm currently working on a rota for which I would like the worksheet to automatically tell me how many staff members I have beginning their shift before 9am and those finishing after 7pm. I currently have this working via a very crude set of IF statements for each staff member for each day of the week, returning 1 if true and 0 if false. Then I have a sum statement at the bottom of each day. Is there a much tidier and simpler way for me to calculate this?
I've attached the worksheet. A quick note is in Q52.
I am trying to create a time sheet where there will be a start time - end time - number of hours (difference between the 2) - pay rate - total pay, but am getting strange results!
View 9 Replies View RelatedI have a number of processes that I would like to calculate the finish times of.
For example, Process A may take 18 hours to complete, Process B may take 28 hours to complete and Process C may take 125 hours to complete etc
However these processes only run during certain times, i.e. 9am to 5pm.
Ideally I would like to setup a spreadsheet that when given the start time and process time calculates the (date and) time the process will finish.
I can get it to work on a 24 hour day but I've been tearing my hair out trying to take out the none-working part of the day (the 5pm to 9am).
I have a spreadsheet with 4 columns - Start Date, Start Time, End Date and End Time. In the 5th column, I need to fill in the "Duration" which is calculated as follows :- Duration = (End Date,End Time) - (Start Date,Start Time)
View 2 Replies View RelatedI have various start times for employees.
I need to find out the total movement in start times per week for the employees.
I have used MIN and MAX to find the earliest and latest start times, and then a subtraction to find the difference.
This works brilliantly until my employees who start around midnight.
If they have started before and after midnight, it takes midnight as the earliest time and 23:00 as the latest, giving a difference of 23 hours instead of 1 hour.
i.e.
Start Times
23:00, 23:15, 00:15, 00:30
Range of Movement
00:30 - 23:00 = 01:30
I've tried, =$B$9+($C$4>$B$9)-$C$4 but this does not work when the MIN reads 00:00.
I have been using this statement
if(and(c1>=a1:a144,c1<=b1:b144),"yes","no"))
And it just works for the first 2 values c1, c2 and doesn't fit for the others.
The case is i have more than one event at the same video and i need to confirm that no event was taken unless it is between start and end.
Here are some samples:
Start dtime End Dtime Event Dtime
16/09/2013 22:13:34 16/09/2013 22:14:18 16/09/2013 22:13:38
16/09/2013 22:15:57 16/09/2013 22:24:30 16/09/2013 22:16:02
16/09/2013 22:24:30 16/09/2013 22:33:49 16/09/2013 22:17:32
16/09/2013 22:33:53 16/09/2013 22:35:05 16/09/2013 22:19:02
16/09/2013 22:35:05 16/09/2013 22:39:57 16/09/2013 22:20:02
So as you can see there are more than one event between one start and end dtimes.
I have been using this statement.
if(and(c1>=a1:a144,c1
It's been several years sine I had to look at calculating amount of time worked.
Can you please look at this old spreadsheet of mine and verify that the formula is correct?
It appears to be ok to me, but I don't want any errors when it comes to paying my employees
Formula: ...
I am trying to come up with a formula that calculates total time someone has worked in a day. The scenario is an individual will work at a home and start working with an individual. Their start/end times look like this in a pivot:
Min Start Max Start Min End Max End
Location A+Counselor A 8:56 AM4:01 PM 1:11 PM 7:00 PM
Location A+Counselor B 12:00 AM 8:00 PM 6:00 AM 11:59 PM
Location B:Counselor C 7:00 AM 12:00 PM 2:00 PM 4:00 PM
Location C+Counselor D 8:00 AM 8:00 AM 4:00 PM 4:00 PM
Some people work split shifts while others work a straight shift. The formula I created was this:
=IF(OR(B9=C9,E9=D9,D9=C9),E9-B9,IF(D9>C9,((E9-D9)+(C9-B9)),IF(C9>D9,((D9-B9)+E9-C9),"New Formula Needed")))*24
(I use a pivot table to show max min for start and end times)
This works great except for the individuals that have multiple punches during the same time frame. The one scenario I am having trouble solving for is when someone punches in more than once during their shift displaying. This occurs when a counselor starts a shift working with one person but then adds another person mid shift. An example of this could be:
Location A+Counselor E Min Start Max Start Min End Max End
Consumer 1 1:00 PM 1:00 PM 8:30 PM 8:30 PM Total Time: 7.5
Consumer 2 12:00 PM 12:00 PM 2:35 PM 2:35 Pm Total Time: 2.6
Pivot says that they worked a total of 10.1 because it is grabbing the max and mins and calculating. The actual total time worked is 8.5 hours in reality.
The raw data comes in like so:
Location Counselor Consumer Start Time End Time
A A A 1:00 PM 8:30 PM
A A B 12:00 PM 2:35 PM
A A C 12:00 PM 5:00 PM
Is this solvable with a formula?
I want the start and end times of the shift to turn black or red depending on whether the adjacent cell says "off" of "Hol" respectively. I have this working except for when I actually enter smething into these cell ie a shift, the cell turns black.
View 4 Replies View RelatedI have a workbook that is generated from the system(AS400)but it wont subtract the time finish -time start. I get a #Value error in the cells I tried two different formulas.
View 2 Replies View RelatedI am trying to find a formula that will return the number of week days between two dates. My specific situation is that my job sets up work orders (WO) to be completed by our staff. We have 3 dates - the date the WO was created, the date the WO is due to be completed, and the date the WO was actually completed.
I would like to subtract the Complete date from the Due date. Generally, this should always equal zero because our staff should be completing WOs on the due date! But obviously that doesn't always happen. There are times that they complete them late, and times they complete them early (yay!).
The problem with NETWORKDAYS is that even when they are completed on time, the result is 1. This formula counts instead of subtracts. I adjusted the formula to =NETWORKDAYS(A3,A4)-1 which works fine for those WOs completed on time or completed late. But for those completed early, it adds (or subtracts, really) 2 days. So for a WO completed a day early, instead of it showing -1, it shows -3. I've attached an example of WOs and the NETWORKDAYS formula I've used so you can see.
Subtract Days.xls
I'm really looking for something that will subtract week days, not count them.
I need to compute the no. of days between start and end dates and spread no. of days on each month. I've attached a spreadsheet with examples and further explanation.
View 3 Replies View Related
