I'm currently using this formula:
=INDEX(B4:B64,MATCH(I5,A4:A64,0))
If I5's value is displayed more than 1 time in Column A, I want the information in Column B to appear in the same cell the formula is in in Column J
I've been trying to edit my index formula to only count an order number once even if the criteria for that result appear more than once. Attachment 324723
View 7 Replies View RelatedExample:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
Just yesterday when I opened my excel file, all the cells that contains formulas does not display the results (leaving the cell blank).
For example the formula for cell A1 is =B5. But after putting a value in cell B5, cell A1 is still blank.
Another interesting dilemma to solve. Using this formula:
View 2 Replies View RelatedHow to do this query but show all results found rather than just one result.
I want the result to be able to show multiple terms from the search terms and index.
for example
Bob's BMW and Ford
Result would be
BMW,Ford
Rather than just Ford
Is this possible?
I am using excel as a scheduling program. The sheet has days of the month across the top, and staff names down the column. We have 5 shifts D,A,B,C,N. I am using the following formula to display if shifts have been scheduled for the column
if(countifB10:N23,"N")=1,"X","N") i.e for the night shift. I then use conditional formatting to change the cell to green if the night shift has been scheduled, or red if it has not.
I would like to have the results of all 5 formulas display in a single cell, to save Real Estate, then have the cell go green when all shifts have been scheduled for the day (column).
Is this even possible?
I have 2 problems relating to LOOKUP.
Not sure if Excel can perform these calculations as they could get to complex.
Problem 1
Can it be possible to have excel look at data from one cell reference another cell then display the results from the cell next to it in another cell, sort of example:
Tab 1 (Never changes)
AB
Bob1
Jon2
Fred3
Tab 2 (Dynamic, changes each week)
AB
Jon
Fred
Bob
So it would work as follows.
Tab2 column B will take Tab2 column A’s data check Tab1 column A and display Tab1 column B’s result.
Problem 2
Weekly league rank table that shows position movements week by week
Example.
Week1
1Jon
2Bob
3Fred
Week2
1FredUp 2
2BobNot Moved
3JonDown 2
Can Excel calculate/show the actual movements of league positions?
I've been working on a payroll program for my small biz. I'm close to done BUT...
When I use the Index Match function in a cell it works great. However I need to copy it down a column to work for pay periods going forward. When I copy it down of course it puts zeros or N/A.
Columns:
Gross Fed FICA Medicare State Net
F G H I J K
Gross is user input. FICA Medicare State and Net are simply calculated on the sheet. But to get Fed Income tax I use the Index Match function and it works perfectly. The rows increment properly with each new user input.
Code:
=INDEX(SingleWH!C$6:M$140,MATCH(G7,SingleWH!A$6:A$140,1),MATCH(E$1,SingleWH!C$4:M$4,0))
This is the code in Column F. You can see where it uses the result in Column G to look for a value in sheets("SingleWH").
My question: Fed Income tax is dependent on what the Gross is in order to look up the tables with the Index Match function. How do I get the result of the function into column G? Can I increment up Column G and ignore the zeros that dragging the function down G creates?
I am trying to get the cell index from a cell reference passed to a function and I have no idea how. eg. In excel
=UDF(D4,...,...,)
What I want is to get is the row and column index for cell D4, not whatever is in cell D4, so I can just click the cell in excel, and drag the formula about etc.
I have a sheet with multiple tabs - 1 per employee. I'm trying to run an index on a select tab based on the contents of a cell in order to do a summary across all employees/tabs.
The person's name is Tulley and is listed on the summary page in cell A11. =INDEX(TULLEY!$B$4:$M$5,1,$B11) returns the correct value. I would like to replace the tab reference with the name of the person concatenated with an exclamation point. This yields TULLEY! -
INDIRECT("A11")&"!". I thought that I would be able to replace the TULLEY! in the index formula with the indirect formula. This formula returns TULLEY!, but the index function doesn't work: =INDEX(INDIRECT("A11")&"!"&$B$4:$M$5,1,$B11).
If a INDEX,MATCH function returns a zero, how do I get it to use the value in the adjacent cell which is a unique number?
=INDEX(Sheet2!A:C,MATCH(A2,Sheet2!A:A,0),3)
Example:
I am running excel 2003 and I am looking for a function that will display the filename or part of the file name in a cell. I know you can do this as part of a header or footer but is there anyway to have an individual cell display the file name of the document?
View 9 Replies View RelatedIf a player does not qualify, their name and score should not be included in the final results.
I currently have their Name missing, but the NUMBER is showing up.
I've explained more in the attachment.
INDEXARRAY.xlsx
In the attached I have an index/match formula in B15 that I cant get to return any results not even a N/A#
Quick Quote Tool.xlsx‎
Im currently studying for an ICT A level and im in my first year doing AS. Im working the AQA board and i have a project that i have a target for an A! I need to create a system for a business and write a report on everything i did...wont go into detail. Anyway. i am having trouble with an IF FUNCTION!!! I have a cell (E35) that contains a percentage.
I want the IF function to display a message depending on what the percentage in cell E35 shows;
IF, 0>> Display "Bad"
40>> Display "OK"
70>> "Good"
90>> Display "Very Good"
E35>=100 >>>> Display "Excellent"
I have tried so many things and I was so sure i entered it correctly, but it keeps coming up with an error.
The following are on a sheet:
A1 = 5700
B1 = 235
C1 = 17:14
D1 = 5922
$E$1 = 09:01
$F$1= 3
$E$1 and $F$1 are (the only) absolutes/constants.
A2 contains the following:
=IF(A1>D1,B1,IF(A1+B1<D1,"d",IF(AND(C1<$E$1,B1<$F$1),"",B1))))
This translates as:
=IF(5700>5922,235,IF(5700+235<5922,"d",IF(AND(7:14<09:01,235<3),"",235))))
The result is a variable/number (235), "d" or a blank cell ("").
This formula is in a column and works fine where there are numbers in corresponding cells. The problem arises with corresponding cells which appear blank (show no values) but contain references to other cells: they result in a "d" when nothing should be displayed.
So while a corresponding blank cell is correct if it shows no values, it gives me this problem - I don't want "d" or anything.
I've spent the last week trying to do the following, with little to no success....and I'm running out of hair to pull out!!
I have a worksheet (let's call it DATA) with the following column headers:
* Site Name
* Year Initiated
* Status
plus a whole bunch of other columns of information.
On a separate worksheet (let's call it RESULTS) I'm trying to create a summary of all the Site Names where the Year Initiated = "2004" and the Status = "Active". There will be multiple occurences where this is true.
I then want to create further results where the year = 2005, 2006, etc., etc. I've been trying to use the INDEX function with variations of MATCH, SMALL, ROW, etc., etc., but so far, no luck.
Advanced Filtering is not an option as I need to do further manipulating of the results on the RESULTS worksheet.
I have a spreadsheet schedule that pulls quantities from another spreadsheet's cells. if the part number of the reference row matches the schedule cell's part number (row), and the date of the reference cell row is 2 workdays after that of the schedule cell's column, the quantity is put in the right place in the schedule. that part works. the problem I have is that sometimes there is more than one quantity with the same part number and date (due to the parts belonging to different jobs). when this is the case, only one of the quantities is picked up by the schedule. i want the schedule cells to sum the quantities of the reference file with matching criteria. i also don't want to have to change the reference file at all in order to do this. below is the function that works (besides summing the duplicates). the part after the " " is what i would need to alter.
HXS is the reference file where D is the part number column, I is the date column, and 5 is the index column referencing the quantity.
C is the part number column in the schedule
K is the date row in the schedule ....
how to return the top 5 results in a set of data.
In a nutshell, I have data that needs to be sorted but some intermediate to advanced (to me) excel formula needs to be used to sort the ranking properly. I've already used index, match and large but it does not suffice.
I have a table with Dynamic Headings and Expanding rows, that's setup like below: The formula in the Qty column would produce a "0", if the result of the Index Match has a blank. For example in a different table the reference cell would have "Heading3". Therefore the results in the Qty column would be like example below. The products in the table below are like 0's and 1's to trigger the formula to calculate with the variables, or give a zero. If the Index Match found "Heading2" the results would be based on cells under "Heading2 Column" etc.
x
y
z
[Code]...
I have a userform that simply filters data on a spreadsheet through checkboxes. The form is filtering columns (B through N) to shorten the list of possible outcomes (data in column A.) After the user is done with the form I'd like to populate the data in column A (the results from filtering and there is no way to pre-determine how many rows will have data) with the user pressing a button on the form, into something the user can see without going back to the spreadshet. I was thinking I could populate the results into some field on the form; maybe a list box, txt file, using the camera function in Excel?
View 2 Replies View RelatedI have written an array formula which you can see in the, "Done something cool in excel" bit on here. Part of this project was to changed/replace three diffence cells on each pass of the loop. I used some code off here which allowed me to display ALL changed on a seperate sheet, but there way way to much data on here and really confused the user. What i would like to do is; in 1 column, for it to say "CHANGED" if the data has changed "EXSISTING" if it hasnt changed and "NEW" if its been added, this will be referencing Column I.
View 7 Replies View RelatedCurrently i am using index and match in excel but however i am unable to get the result tt I want.. what i need is
Data to check with item master whether all 3 (article, color code and size) matches and if it doesn't match, which of the field is wrong. (eg: wrong color code, wrong size or article don't exist).
[Code] .......
Above is my item master
Data to check
[Code] ........
Example case: 1
Checking first row of data check
Article number: 2-50660147
Color code: 6
Size: M
Result: "Wrong size"
But however, it returns as wrong size as it only reads the first time the article number appear in the item master and does not recognize the second time the article number appears with the correct color and size.
I am building somewhat of a rudimentary search engine that looks for a name, address or unique identifier, using an Index Match formula that searches with a wild card:
=INDEX(Name,MATCH("*"&F3&"*",Name,0))
"Name": is the defined name for column C on a separate sheet.
F3: is "search field"
The current formula (above), only returns the first match. The source data is only 927 lines so not overly large. I would like to have an additional page that will show the potential results from the wildcard search via a formula. Therefore needing results; 2, 3, 4, 5 etc. from the Index Match. I have searched high and low for solutions but I have found none in regards to retrieving multiple results from a wildcard search, only on a specific term.
let me start by saying that I know an example workbook would be useful here, but the part I'm struggling with is the [managementroster.xlsm] file, and there is A. no way I can release it to the internets and B. its so huge/complicated I couldn't even begin to reproduce a portion of it, scrubbed of data, and hope to maintain its functionality in a meaningful manner.
[Code]....
This formula checks a staff number on this spreadsheet, and then goes and looks at the staff number on the roster. Once found, it returns that staff members roster, but changes any manager codes in the MRC list to Mgr, and changes all other roster codes to Free.
I now need this formula, before altering roster codes to Mgr or Free, to only return codes that are a match for another table (or after really. I don't particularly care, so long as only codes are shown that match data from another table). I think an index/match function would do the trick, but this forumula is already at the edge of my excel ability, nesting another function within it is completey beyond me. The relevant cells for the index/match function would be:
This first Match function targets the column. $E3 is the date required, $BA$1:$DN$1 is the range the dates are entered in
Match: Lookup value = $E3
Lookup array = '[ManagementRoster.xlsm]Vacancies!'$BA$1:$DN$1
match type = 0
This second Match function targets the row. $A$4 is the department name, $B$434:$B$452 is the range where all departments are entered
Match: Lookup value = $A$4
Lookup Array = '[ManagementRoster.xlsm]Vacancies!'$B$434:$B$452
match type = 0
Index: array = $BA$434:$DN$452
So I think my final function is
[Code] .....
But I have absolutely NO idea where it would fit within my first formula, or how to code it so that my original formula only reproduces results that are found in both sheets, or anything.
If the results are < or = to 60, then I want result to be green. If the result is > 60, then I want to result to be red
View 2 Replies View RelatedI've put together a workbook that has 2 sheets that contain stock details and location info (i.e. part number, description, Location & stock level). I need to have a search function outside of the 'built-in' Ctrl+F (or Edit > Find) search function, i'd assume this would mean using VBA?I invisiage making a userform embedded within the very first sheet of the workbook and having this form be opened when accessing the worbook - maybe hide the other two sheets containing the data? Within the search userform, i would have a 'part number' & 'description' search input boxes for data input, either one could be blank but atleast ONE must be inputfor the search to work. On pressing the 'Search now' command button in the userform, any reults found would be displayed in a listbox at the bottom of the said userform. If no results found, a dialog box would pop-up saying 'No Items Matched"
View 7 Replies View RelatedI am looking for the best way ( or choice of ways) to display the correlation between 2 lists of results.
I have a column of failure percentage rates for engineers that I want to compare against a second column of their compliance rate with a process. There are two levels also. The first set shows the good performers and their compliance, the second showing the poor performers.
My goal is to see whether their compliance with the process has any bearing on their failure rates. The full lists contain data on approximately 400 engineers in each category
(if the the numbers below are not in a proper format, I tried to download the excel converter thingy but the link failed)
faliure rate
Compliance
3.95%
91.40%
[Code]....
I have a spreadsheet with 2 columns, 'A' is the property number and street name, and 'B' is the year the work is going to be done on the property.
I have a form with a textbox and command buttons, now what I want to do is allow the users to enter property number and street in textbox1 and click commandbutton1 to search. If it finds a match I want a small message to come up and say either the year the work will be done (column B) or 'no match found'.