I want to pull the file location of a hyperlink to populate a image control in a form. I have 150 names, each with pictures. So I need to do a index,match or vlook up within the VBA and make the result the active cell. From there I know how to pull the file location out. Just need to know how to make the address of a index match result in vba.
View 5 RepliesI have a data table, called Table1 in Sheet1. In a simple form it is
Customer ID
Comment
A
asdf
B
jkl;
So in VBA, I need to figure a way to give me the cell address of the matching cell in Comments. So say Customer ID starts at A1 ... that means the Comment for Customer A is B2.
How would I get that reference in VBA?
What I want to do is, given the data in col. a, I want to supply a number(range) of strings which can be found in column a, whenever a string is found, which exists in given range, I want to write the string from the Key(col. c) in col b instead of the value from the string that matches a value.
See below for example of what I got working but not exactly what I was looking for
Col. A- Data
Orangegreen
Blackwhite
Blueyellow
Col. B - Result
Col. C - Keys
Orange
White
Yellow
I used
Code:
=INDEX(A1:A3,MATCH("*"&C1&"*",A1:A3,0))
This does produce a result, but not entirely what I am after.
This requires only one string to search for, and will in cell B1 result in a value of 'Orangegreen' as I can only supply one valeu to the function. What I want to do is supply the function with a range of values, and have those values outputtet in colb instead af the value of cells where the result is found.
I tried modifying the function to include a range, but that does not produce a valid result.
I have used in Index & Match formula in column G as follows :
=IF(ISNA(INDEX(R:R,MATCH(E13,S:S,0))),"",(INDEX(R:R,MATCH(E13,S:S,0))))
The codes in columns R & S are as follows:
******** ******************** ************************************************************************>Microsoft Excel - M_NECPE.Man Accts.xls___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutR1=RSTU1New CodesOld Codes 2 310100199999V 4101002NEW 51010032270A 61010061100 7101009NEW 81010101104 91010111101P 101010121101S 111010141102 121010151102L 131010181130 141010222203 151010231106I Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
The code in column E & G is as follows:
******** ******************** ************************************************************************>Microsoft Excel - M_NECPE.Man Accts.xls___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutG62H62G63H63G64H64G65H65G66H66G67H67G68H68G69H69G70H70G71H71G72H72G73H73G74H74=EFGH621106B| 631100|101006 641101D| 651101K| 661101P|101011 671101S|101012 681102|101014 691105R| 701103|101037 711104|101010 721105| 731106|101031 741106I|101023 Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I have used a lookup table to calculate the value in column H as follows, but cannot get it to work
=IF(ISERR(VLOOKUP($E62,$M$3:$O$850,3))=1," ",VLOOKUP($E62,$M$3:$O$850,3))
I have two lists of values in ascending order. Column A is an identifier and is always one more than the previous. Column B is ascending as well, but there is never any guarantee that it will increase from one row to the next or how much it will increase when it does.
My index formula looks like this: =INDEX(A2:A21,MATCH(D9,B2:B21,1)+1)
In this example, if D9 = 1 then it needs to return 6 but instead returns 10. How can I make this index for my purpose? Or should I be looking for a different function?
I am using this to count how many times a particular number appears across numerous sheets, My sheets are in a Named Range MySheets....
=SUMPRODUCT(COUNTIF(INDIRECT("'"&MySheets&"'!A2:A30"),A2))
This works great.
What I now need to do is to find ALL matches and return B1 from those sheets..
GHIJKLM1Countif ResultFirst ResultSecond ResultThird ResultFourth ResultFifth ResultSixth Result25AppleBananaPearMangoOrange31Banana43BananaMangoOrange
I have played around and the closest I can get is with this...
=IF(COUNTIF(INDIRECT("'"&MySheets&"'!A2:A30"),$A2),INDIRECT("'"&MySheets&"'!B1"))
This as you may know only returns the result B1 from the first sheet within MySheets.
Here is a code for me to print the names in ascending order even if values are of same means it is showing one name only instead of the other name
means if values are A=1 B=2 C=3 D=4 E=2
it has to show like this A B E C D
But the result is coming like this A B B C D
Formula which i used
=OFFSET(B$6,MATCH(SMALL(C$6:C$18,ROW()-ROW(C$6)+1),C$6:C$18,0)-1,0)test.xls
Here i am attaching the sample file for your reference
I have this table
.......A.....B.....C....D
1.....I......a.....d.....g
2.....II.....b.....e.....h
3.....III....c.....f......i
As you can see, the number I has a,d,and g, II has b,e,and h, and III has c, f, and i
I want to make formula that if I make the input g it would return I, f would return III, and c would return III, and so on
I want to make four formulas by using VLOOKUP, INDEX, MATCH, INDEX&MATCH separately.
How do you use the result of the "Address" function as ranges for other formulas?
I have 2 cells A1 and A2, each containing an "Address" function to find the start cell and end cell of a range.
A1 shows the result "$J$6" and A2 "$AB$6". These are working fine:
A1: =ADDRESS(ROW($A6),MATCH(HLOOKUP('cleaned up'!$I$2,pivot03!$2:$2,1,FALSE),$2:$2,0),1)
A2: =ADDRESS(ROW($A6),MATCH(HLOOKUP('cleaned up'!$I$5,pivot03!$2:$2,1,FALSE),$2:$2,0),1)
I want to get the average of this range using cells A1 and A2, but Excel treats the formula as an error: =Average(A1:A2) shows the error #DIV/0!
Going back one step and putting the formulas within cells A1 and A2 into the average formula doesn't work at all with a colon:.....................
Is it possible to get the location of the result cell of a lookup result. For example, instead of showing the cell value it shows the cell address of the results of a lookup. You see I have this Summary Report of a payroll system. Everyone doesn't need to pay social charges, except two people, "person1" and "person2". What I want to do is to first look at the names in the report to see if one of those people are listed in the summary(this can be done by lookup, I think). Then go to a different column on the same row as the person. So, for example, "person1" is in a14, then the macro will select the cell say... g14.
View 6 Replies View RelatedI am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies View RelatedWe know how INDEX/MATCH works, and it's very nice. I attached a COUNTIF to it to count how many times the index finds itself on another table; if it doesn't find itself, then it goes blank. However, this time I need to count how many times it finds a certain string condition in the other table.
sampleexcelhelp.xlsx
The columns that need to be filled are shaded in dark pink.
See attached file, "Rate Sample Index-Match Formula".
I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".
In the 1st tab, "TEST FILE" there are a series of columns as follows;
A = Service
B = From
C = To
D = Rate
In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)
The formula needs to do the following;
1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green
2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue
3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59
For Example;
The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.
Additionally, if we were to add service as an additional lookup match how would this work?
I would like to “ping” each computer ip address to check if it is online or offline and then write the result in Column C.
There needs to be no limit to how many ip addresses the script can ping.
I have two sheets of data , sheet A and Sheet B.
Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.
I have filled out the first two rows of results that should be returned as an example.
One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.
Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.
2011
2011
2011
2012
2012
2012
[code].....
INDEX/MATCH multiple ocurence match values needed
View 9 Replies View RelatedI have a combobox that returns me the names that are in a spreadsheet.
I need a return label, the index (address of that cell that the combobox returned), how do I do that?
I am using VLOOKUP to find the size of a cam to be installed in a tablet press, based on the product code it will be running.
The array has two columns: (W) Product Code, (X) Cam Size.
Array: W4:X437
The user selects the Product Code from a drop-down list in cell E5.
The resulting Cam Size is displayed in cell E7. The VLOOKUP works fine.
=IFERROR(VLOOKUP(E5,W4:X437,2,FALSE),"")
Occasionally, the cam size has to be updated. The user would then select a new cam size from a drop-down list in cell E9.
I have a "Update Cam Size" command button.
What I need to happen is for the value in E9 to replace the value in the array that is displayed in E7. Obviously, I have to know the location of the cell in the array, but I can't figure that part out. I've tried ADDRESS and MATCH functions, but it comes back with "#N/A" Value not available error.
=ADDRESS(MATCH(E7,W4:X437,0),2)
I have a sheet with multiple tabs - 1 per employee. I'm trying to run an index on a select tab based on the contents of a cell in order to do a summary across all employees/tabs.
The person's name is Tulley and is listed on the summary page in cell A11. =INDEX(TULLEY!$B$4:$M$5,1,$B11) returns the correct value. I would like to replace the tab reference with the name of the person concatenated with an exclamation point. This yields TULLEY! -
INDIRECT("A11")&"!". I thought that I would be able to replace the TULLEY! in the index formula with the indirect formula. This formula returns TULLEY!, but the index function doesn't work: =INDEX(INDIRECT("A11")&"!"&$B$4:$M$5,1,$B11).
I am trying to open a workbook with
Workbook.Open filename:="xxxxx"
The address in the xxxx is something like this "G:AnimalMammalZZZZGorillayyyy.xls"
The ZZZZZ portion is the result of an InputBox.
What is the syntax for placing the result of that InputBox in the middle of the address?
Is it possible to return a value or a sum of values using segmented lookup criteria. The Sample 1 spreadsheet (attached) explains it better.
View 10 Replies View RelatedI couldn't resolve the formula of Index-Match for getting the values that matches the following criteria
1) Match the "Category" of Table 1 to Table 2
2) Match the "value" of Table 1 to Table 2, if value is not present in Table 2 take the upper closest value.
Once the above conditions are met, Take the Result from Table 2
Table 1 is for Input and Table 2 is for Database.
Please note that Data in Table 2 should not be sorted in any way. I tried to use the -1 option of the Match function for upper closest value but it didn't work out.
Have a look at the file attached : IndexMatchUpperClosestValue_AlongwithExactMatch.xlsx
I currently have a spreadsheet with two sheets. The first is my reporting sheet and the second is called Stores. I currently am using the following formula in the reporting sheet:
View 3 Replies View RelatedI am looking to sum the values found at the intersection of multiple values based upon a vertical and horizontal lookup. The formula I am trying is as follows (which results in #Value):
{=IF(ISBLANK(G$9),"",SUM(IF(INDEX('Journal'!$A$20:$Z$1020,MATCH("Prior",'Journal'!$F$20:$F$1020,0),MATCH(G$9,'Journal'!$H$19:$Z$19,0)),"")))}
I am attempting to get an INDEX function with multiple "IF" statements to return more than one result. Building multiple IF statements. That portion of the below formula works. However, I can only get the INDEX formula to return the first, single result.
Formula:
=IFERROR(INDEX(Func_Area,SMALL(IF(Const_Start<=DATE(YEAR($B$2),MONTH($B$2),DAY($B$2)), IF(Cost_End>=DATE(YEAR($C$2),MONTH($C$2),DAY($C$2)),ROW(Func_Area)-MIN(ROW(Func_Area))+1,"")),ROWS($A$4:A4)))," ")
Func_Area,Const_Start,Cost_End are all Named Ranges on Sheet "Proposed". My intention is to return a list of projects on Sheet Test1 for all projects starting construction after a certain date and completing construction before a certain date. I suspect something in my ROWS fuction or ROW-MIN+1 is wrong.
This formula returns the first result in the first row, but every subsequent row is blank...see attached spreadsheet.
I'm compiling a list of names on a separate tab from a column that only lists the names sporadically. Problem: In the formula, the IF provides a TRUE, the row function, and consequently, the INDEX function (when I hit F9) provides the correct "name" and row number, but when I hit return, it provides the text 4 cells beneath what it should.
=IF(ROWS(F$5:F5)
I am trying to populate a table (a7:c27) in the attached sheet with data.
First, I must enter a number 1-16, which uses index function to return either "series" or "base"
If it is base, i want the number in the corresponding table filtered down - i.e. if 1 originally picked then h7 is (40) is entered into each month as base = constant.
If the result is series, then the data in i7:z7 is entered into the the 18 month table.
Example:......
On my worksheet 1, I have two dropdown boxes: B7 (that gives the building name) and B11 which gives the Type of Commission (Renewal, Expansion, New). B 20 is supposed to automatically select the percentage based upon what B7 and B11 select. E.g. B7 = House, B11 = Expansion then B20 should be 3.
This is my formula.
=HLOOKUP(B7,'Building Details'!$A$2:$R$24,MATCH(B11,'Building
Details'!$A$2:$R$2,0))
i have weights entered in A1 , B1 , C1 and I manually enter almost same weight in D1, E1, F1 . Now I need the result as " OK " in G1 if the weights A1,B1,C1 match with D1,E1,F1 if it doesn't match then result should give "Please check again".