Use Vlookup To Change Cells Without Scrolling
Nov 12, 2007
if it is possible to change a cell that the vlookup has found without scrolling all the way to that cell.
I have attached a small sample of my workbook. Once the vlookup has found the item I would like to change the number in G5 and make it change the number below in the OUT column that corresponds with the found item.
Example:
row 11 is found with vlookup. i want to be able to change G5 to the number 8which will make G11 the number 8. And then make it stay even after i have done vlookup on another item.
I believe this will require a VBA code. Also I am using Excel 2007. I have added a test page. It is saved in 2007 format. If anyone needs it saved in 2003 please ask.
View 9 Replies
ADVERTISEMENT
Feb 10, 2009
Ive seen on someone elses workbook the first 6 columns are fixed (always in view) then you can still scroll across but those first six columns always stay in view.
View 3 Replies
View Related
Aug 18, 2009
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
View 3 Replies
View Related
Sep 29, 2009
I've been searching all over and can not figure this out as from my limited knowledge it should work. I have two sheets (A & B) and on Sheet A an employee inputs a job number into column B and what I then want to happen is have column D populate automatically with the clients address. This client address is located in Sheet B. I figured the best way to do this was to use a combination of the 'Change Event' method and VLookup utilising a bit of VBA, but I just cant get it to work - I keep getting a #Name? error.
View 5 Replies
View Related
Oct 30, 2012
The formula below (in cell under Product 1) is accurate and works. It simply pulls data from sheet A159CLE. My problem is this formula has to be copied down 400 rows and over 50 columns. At every row change, the formula needs to change to reflect pulling from a different sheet. The sheet names are in Column A1 listed as Display Pog #. I have been using the find and replace to change out the new sheet names, but with 400 rows this gets very tedious.
=VLOOKUP($B6&O$4,A159CLE!$1:$65536,4,0)
Stores: 183
1
1
2
2[code]....
View 4 Replies
View Related
Oct 21, 2013
I am attempting to write a bit of code so that Vlookup is called when a particular cell in my spreadsheet is populated.
Although it seems to be working, it is only pulling in the data in row 1.
An example of the code is below.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row 1 Then
If Target.Column = 2 Then
[Code]....
View 1 Replies
View Related
Jun 5, 2014
I have a search feature that will display several results based on the criteria of the search. I also have a Vlookup set so when the topmost name appears in A5 cell the, vlookup shows info for that person across several columns. However if the search shows several people with the similar names then the person I want may not be in the topmost box (A5). Is there any way that I can click on the cell with the correct persons name (may appear in A10) that will change the value in the vlookup command and show the details of the person I can't copy the vlookup down for ten rows as there is other info there. I have room for one row for the vlookup command to fill.
View 2 Replies
View Related
Feb 18, 2014
I have a workbook that uses the values that a user had entered into 3 cells to calculate multiple other charts/diagrams on multiple sheets within the workbook. Each sheet would show what the user had entered in the 3 cells to allow them to see what is being used to calculate each table. Is it possible to link these cells so that the user can change the 3 values without having to go back to where he originally entered the 3 values?
For example, a user has entered in 3 values in Sheet 1. A formula in Sheet 2 displays what is entered by the user and uses these calls in Sheet 2 for calculations. When the user wants to change the three values, he would have to navigate to Sheet 1 and enter in the new values to have the workbook recalculate all the tables. Is there a way to link the three cells from Sheet 1 and Sheet 2 so when the user is on Sheet 2, he has the opportunity to change the values on the current Sheet without having to navigate to Sheet 1 to do so?
View 1 Replies
View Related
Nov 30, 2008
I've created a worksheet with split panes. I'm able to scroll through my data vertically and horizontally while keeping one area of th screen stationary. Here's my question:
Is there a way to limit the movement of my scroll bars so that it can't move beyond the viewable portion of my worksheet? In other words, I want the scrolling to end when there is nothing else to see but a field of empty cells.
View 11 Replies
View Related
Nov 6, 2007
way of getting two sheets to scroll together, so when I scroll one window the other one moves too? Some text editors have that future (IIRC UltraEdit does)
I can't find a scroll event in the windows code to trigger a macro to run itself.
I can get around it by using a selection change event which would restrict me to moving around with the cursor keys/Pageup/down, but I've got 15,000 to review regularly in a short space of time and it would be quicker by mouse
View 9 Replies
View Related
Mar 18, 2008
[code/]Private Sub Worksheet_SelectionChange(ByVal Target As Range)
'This macro scrolls the Report to TopLeft when you click
'anywhere in the Report columns
If Target.Column > 16 And Target.Column < 22 Then
With ActiveWindow
.ScrollRow = 1
.ScrollColumn = 15
End With
End If
If Target.Column >= 1 And Target.Column < 15 Then
With ActiveWindow
.ScrollRow = 1
.ScrollColumn = 1
End With
End If
End Sub[code/]
...but I cant figure out how to scroll it down the list to the NextBlankRow-20 such that the previous 20 lines of data are shown to the top of the screen.
View 9 Replies
View Related
Jul 14, 2008
Is it possible to use a macro that do the following:
scrolling, only the used range + 1
So if the used range is B2:D12 then the scrolling is possible to row 13 and column E
View 9 Replies
View Related
Dec 11, 2012
I have a Password login userform on my workbook for users to enter their username and passwords.
Now i want to make a userform where users can change their passwords.
With the login userform i used a application vlookup function to see if the username and password are corresponding. how can i code a userform to look for the username in column A and then change the password in column B?
Password.xlsm
View 9 Replies
View Related
Oct 25, 2007
Is there a way to automatically change the column index number in the VLOOKUP formula when copying the formula to columns? For example, when I copy a VLOOKUP formula from column A to column B, the cell references will change, but the column index remains the same. I'd like the column index to be increased by 1.
View 2 Replies
View Related
May 8, 2009
I have a sheet that uses V lookups to return names, there are 10 diff names throughout the sheet it could return
I want to change the background colour of the cell depending on what the name is. the v lookup is run in collums A - L and 100 rows down
How can I code it so each name has its own background colour so the Cell changes according what the V look up returns?
View 12 Replies
View Related
Oct 22, 2011
I have a statement in a cell in which there is a date field.
Is it possible to apply Vlookup on the statement and change the Date value keeping the statement same ???????
View 7 Replies
View Related
Mar 6, 2012
I have one sheet from which work is assigned to 10 different employees. Its format is something like the following:-
document number assigned to status remarks
12345678 john
45678910 steve
11247511 john
The individual sheets are then saved and assigned to all the employees.
document number assigned to status remarks
12345678 john approved
11247511 john denied info req
Now I want to update the data in the sheet by something like this
document number assigned to status remarks
12345678 john =vlookup(A1,[empname.xls]Sheet1!&A:$D,3,0)
45678910 steve
11247511 john
I got to know that indirect can be used for this.
View 1 Replies
View Related
Oct 22, 2012
I have found this code that, with changes, I can make work with the cells and columns I am using. What I cannot see is how to make more than one cell change colour rather than just the cell in column J.
How can I change the code below to change several cells in the row? I will be using cells in columns A:F.
Data will be entered into the rows from A2 to E2, in F2 a vlookup will enter one of the values, "High", "Medium" etc.
Each of these values has a colour assigned. The code below, with alterations, will be able to colour the cell in F2 depending on which value is entered. I need the whole row from A2 to F2 to be coloured.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim ChangedRange As Range
Dim r As Long, iCol As Long
Set ChangedRange = Intersect(Target, Columns("F:H"))
[Code] ......
View 5 Replies
View Related
Jul 27, 2007
I am trying to do a vlookup where the values in the Table_Array have a string appended to them. For example:
I want to look up the string "Example1" and the lookup range is
Example1 - monthly
Example2 - weekly
Example3 - weekly
Example4 - monthly
So essentially I want vlookup to only look at the string before the hyphen. My initial thought was to do something like this: vlookup("Example1", left(A:A, 8), 1, FALSE)
View 6 Replies
View Related
Apr 26, 2014
I want to return the value of E2 from sheet, "ALL INFO" and paste it in B2 on my current sheet. When I scroll this formula to right, I want the next to be the value of J2 from sheet, "ALL INFO," etc.
View 2 Replies
View Related
Dec 18, 2009
I'm looking to disable the horizontal and vertical scrolling in 1 worksheet
Am i able to do this?
View 5 Replies
View Related
Feb 2, 2014
I'm having a problem working with a protected document made by another user.
The sheet has a vertical split at column F, and when I use the arrow keys to scroll right beyond this line (ie from column G and beyond), when I reach the last column (BB), it just loops straight back to the beginning (column F). This also happens in the same direction.
How I can stop this happening, so that it just stops when it reaches the end of the document?
There doesn't appear to be any coding on the sheet.
View 1 Replies
View Related
Jul 5, 2014
I have a spreadsheet where I want to put notes in, but I don't want to re-size the cell as it will ruin the format. The amount of information will vary from entry to entry, each entry into the sheet will have its own row and within that entry I want to dedicate one column's cell for that entry's notes. Is there anyway to make a macro for a scroll bar for individual cells so I can scroll though the text entered in that cell. I have tried a text box but the text overflows once the amount of text over fills the text box.
View 4 Replies
View Related
Nov 17, 2009
i want to know whether there is any way to make an MouseWheel-Event in VBA (Excel 2003) and send it to the scrollBars of my UserForm?
View 3 Replies
View Related
Feb 1, 2010
I want is a form that has three different partsof it. Each part containing checkboxes, a spreadsheet, textboxes and labels. But I only want to display one of these parts at a time, depending on what the user clicks.
I know I could write code to move everything into the visible part of the form but that would be messy. I hoped I could find some way to instead move the visible part. Like if I had scrolled.
An example. Say the visible form is 100 high and 100 wide. When opening you see from the width 0-100 and height 0-100 (pixels or whatever those things sould be called). Upon pressing a button I instead want to see width 101-201 and height 101-201.
View 5 Replies
View Related
Dec 1, 2011
I am sure this has been asked -and answered- before.
I need to select a cell, e.g. C1000, and change the view, so that I see C1000 on top of my spreadsheet.
range("C1000").select clearly does not accomplish what I want.
View 4 Replies
View Related
Dec 30, 2011
What is the vba code to disable scrolling Up or down?
View 1 Replies
View Related
Nov 9, 2012
Is there a way to limit the number of columns and rows that a user will see and therefore limit the scrolling in a spreadsheet?
View 6 Replies
View Related
Jul 28, 2013
I have a worksheet with a column("A:A") of about 1000names. The user will start at the top and work down, entering stuff into other columns for some ofthe names. My need is: How do you automatically scroll, with code, say row 48to the top of the worksheet when the user reaches row 48 with?.
View 2 Replies
View Related
May 29, 2008
I have a sheet in which I want to limit the scrolling area to B2:B60 & D2:H60, in other words I don't want to include neither A2:A60 nor C2:C60 in my scrolling area.
Is there a way to do this?
I know I can lock the cells, however, pre-existing code will not work if cells are locked.
View 9 Replies
View Related
