I am attempting to write a bit of code so that Vlookup is called when a particular cell in my spreadsheet is populated.
Although it seems to be working, it is only pulling in the data in row 1.
An example of the code is below.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row 1 Then
If Target.Column = 2 Then
[Code]....
i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.
The existing code i have is:
Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"
[code].....
I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?
How would I add this formula as a worksheet function with VBA. I can't see INT, MOD or Year in VBA. Also want to change C2 to change to activecell column + row 2.
=INT(((C2-1461)- SUM(MOD( DATE(YEAR(C2-MOD(C2,7)+3),1,2)-1461,{1E+99,7})*{1,-1})+5)/7)
I have a Password login userform on my workbook for users to enter their username and passwords.
Now i want to make a userform where users can change their passwords.
With the login userform i used a application vlookup function to see if the username and password are corresponding. how can i code a userform to look for the username in column A and then change the password in column B?
Password.xlsm
I was having an issue with my vlookups not working properly so I took out the error handler to try and find out why.
It came up with the error "Run-time error '1004': unable to get the vlookup property of the worksheetfunction class"
Below is my code. How to rectify this?
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
Dim rng As Range, cell As Range
[Code].....
Is it possible to use the worksheet function Vlookup on subtotal values? If so what is the formula? The problem that I am trying to solve is as follows. I have a sheet (1) listing part numbers that are not moving at a particular depot. On another sheet (2) there are details of sales relating to the non-moving part numbers at 6 other depots, I have added subtotals. Currently I am switching between worksheets to see if I can transfer stock. I would like to id on sheet 1 the total number of sales at other depots, then I can see what part numbers may be transferrable without a great deal of manual intervention.
View 2 Replies View RelatedThe vlookup worked earlier but now it doesn't and everything looks OK to me. Scroll down a little bit in the code view to see the error line.
HTML Code:
Sub Email_Executed()
Dim OutlookApp As Outlook.Application
Dim MItem As Outlook.MailItem
[Code]...
Is it possible to use the Worksheet_Change command to monitor 2 different cells in the same worksheet and call a different procedure depending on which cell is changed. i.e. if cell A1 is changed do this, if cell a2 is changed do that
View 9 Replies View RelatedI recently upgraded from Excel 2003 to 2007, and the worksheet change procedure that i have embedded in my worksheet no longer fires when the criteria are met. If and if I fix it to work in 2007, will it still work in 2003?
Here is my procedure:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rngCell As Excel.Range
If Not Intersect(Target, Range("C19:R19")) Is Nothing Then
For Each rngCell In Intersect(Target, Range("C19:R19"))
If rngCell.Value = "BLACK" Then
MsgBox "Please select a shading style", , "Shading Style Required"
End If
Next rngCell
End If
End Sub
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
let me start by saying that I know an example workbook would be useful here, but the part I'm struggling with is the [managementroster.xlsm] file, and there is A. no way I can release it to the internets and B. its so huge/complicated I couldn't even begin to reproduce a portion of it, scrubbed of data, and hope to maintain its functionality in a meaningful manner.
[Code]....
This formula checks a staff number on this spreadsheet, and then goes and looks at the staff number on the roster. Once found, it returns that staff members roster, but changes any manager codes in the MRC list to Mgr, and changes all other roster codes to Free.
I now need this formula, before altering roster codes to Mgr or Free, to only return codes that are a match for another table (or after really. I don't particularly care, so long as only codes are shown that match data from another table). I think an index/match function would do the trick, but this forumula is already at the edge of my excel ability, nesting another function within it is completey beyond me. The relevant cells for the index/match function would be:
This first Match function targets the column. $E3 is the date required, $BA$1:$DN$1 is the range the dates are entered in
Match: Lookup value = $E3
Lookup array = '[ManagementRoster.xlsm]Vacancies!'$BA$1:$DN$1
match type = 0
This second Match function targets the row. $A$4 is the department name, $B$434:$B$452 is the range where all departments are entered
Match: Lookup value = $A$4
Lookup Array = '[ManagementRoster.xlsm]Vacancies!'$B$434:$B$452
match type = 0
Index: array = $BA$434:$DN$452
So I think my final function is
[Code] .....
But I have absolutely NO idea where it would fit within my first formula, or how to code it so that my original formula only reproduces results that are found in both sheets, or anything.
an event macro to change the font colour of a cell whose value changes as a result of a calculation.
View 9 Replies View RelatedAttached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.
My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.
Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.
how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?
I am fairly new to macros and have trouble with VBA. I have a file with multiple worksheets. Each worksheet contains the name of a specific location in cell A8. I want this name in cell A8 to be the name on the worksheet tab for each worksheet in my file but do not know how to accomplish this. Is that even possible?
View 3 Replies View RelatedI am trying to use the vlookup function together with an offset function but i am not getting it to work properly.
The situation is as follows:
I have a column E in which i use the vlookup function to find its corresponding value in B which in turn refers to a named range. However, the figure i want the function to return is 2 columns to the right and 2 rows above the value which the vlookup funtion finds in the first column.
I have though of using the offset function, but i cannot figure out how to make this work.
Workbook contains the following sheets : PIR TrackerChartsSAMPLEFINALValidations
When a change occurs on PIR Tracker, the following occurs:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Application.ScreenUpdating = False
Dim Rng As Range
Set Rng = Intersect(Target, Range("A1:A500"))
[Code] .....
I also want the pivot tables on SAMPLE and FINAL to be updated. What do I need to do?
In cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now it’s 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.
View 3 Replies View Relatedlooking to only allow a check ("x") in a column for a reconcile - type worksheet. Am I close?
Private Sub Worksheet_Change(ByVal Target As Range)
'Data protection. Only allow "x" in the "cleared" column. If anything else is entered, a message box informs the user
'and the cell contents are cleared.
Dim val As Variant
Dim msg As String
If ActiveCell.Value "x" Then
msg = "You can only enter an X in the cleared column."
ActiveCell.ClearContents
End If
End Sub
I have a user defined function in one VBA module that I'd like to call from another module, so I would normaly scope it as "Public".
However, as I don't want it to be available to Excel as a worksheet function, I would also normally scope it as "Private"
Is there a way to have a function that is available to other VBA modules in the same project, but not to Excel as a worksheet function?
Is there a way to either change this so that it lets me to select the whole area or a way to make a macro to do what this does to one cell?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Target, Range("M13:IR458")) Is Nothing Then
Select Case Target.Value
Case "1"
Target.Font.ColorIndex = 20
Target.Interior.ColorIndex = 10
Case "Good"
Target.Font.ColorIndex = 2
Target.Interior.ColorIndex = 35
Case "Stable"
Target.Font.ColorIndex = 2
Target.Interior.ColorIndex = 27......................
I've been searching all over and can not figure this out as from my limited knowledge it should work. I have two sheets (A & B) and on Sheet A an employee inputs a job number into column B and what I then want to happen is have column D populate automatically with the clients address. This client address is located in Sheet B. I figured the best way to do this was to use a combination of the 'Change Event' method and VLookup utilising a bit of VBA, but I just cant get it to work - I keep getting a #Name? error.
View 5 Replies View RelatedUsing the Mid function in Vlookup. I want to get the mid of the value which i get using vlookup.
Example: if my Vlookup gives the value as "GSC 03-Parts & Service Systems-GSMS-Test " i want to use the mid function to get the a new value as 03.
I'm using the below code :
[Code] ....
Attached File : VlookMid.xls‎
using the Mid function in Vlookup. I want to get the mid of the value which i get using vlookup. Example: if my Vlookup gives the value as "GSC 03-Parts & Service Systems-GSMS-Test " i want to use the mid function to get the a new value as 03. I'm using the below
View 3 Replies View Relatedvlookup function. find whats wrong with my code
View 3 Replies View RelatedIF(ISNA(VLOOKUP(E24;Sheet1!$A$6:$N$25000;10;FALSE))=0;"NOT FOUND";"FOUND")
This Formula doesnt seem to work, it shows me either every row with found or not found..
If there is a match to E24 in other sheet and has a value in column 10 it should say found otherwise not found.
How do I use excel to refer one cell as a constant value while the second cell varries as the cell value changes along multiple sheets.
View 7 Replies View Relatedif it is possible to change a cell that the vlookup has found without scrolling all the way to that cell.
I have attached a small sample of my workbook. Once the vlookup has found the item I would like to change the number in G5 and make it change the number below in the OUT column that corresponds with the found item.
Example:
row 11 is found with vlookup. i want to be able to change G5 to the number 8which will make G11 the number 8. And then make it stay even after i have done vlookup on another item.
I believe this will require a VBA code. Also I am using Excel 2007. I have added a test page. It is saved in 2007 format. If anyone needs it saved in 2003 please ask.
The formula below (in cell under Product 1) is accurate and works. It simply pulls data from sheet A159CLE. My problem is this formula has to be copied down 400 rows and over 50 columns. At every row change, the formula needs to change to reflect pulling from a different sheet. The sheet names are in Column A1 listed as Display Pog #. I have been using the find and replace to change out the new sheet names, but with 400 rows this gets very tedious.
=VLOOKUP($B6&O$4,A159CLE!$1:$65536,4,0)
Stores: 183
1
1
2
2[code]....
I have a search feature that will display several results based on the criteria of the search. I also have a Vlookup set so when the topmost name appears in A5 cell the, vlookup shows info for that person across several columns. However if the search shows several people with the similar names then the person I want may not be in the topmost box (A5). Is there any way that I can click on the cell with the correct persons name (may appear in A10) that will change the value in the vlookup command and show the details of the person I can't copy the vlookup down for ten rows as there is other info there. I have room for one row for the vlookup command to fill.
View 2 Replies View Related