I have is a summary worksheet with two columns. One column is for Project ID number and the other is an address link to a specific cell in the worksheet corresponding to the Project ID. Perhaps the best way to explain this is by giving an example:
As you can see the spreadsheets are named after the Project ID number. What I would like to do, if possible, is instead of typing in the name of the spreadsheet for each project in column 2 (Balance), I could somehow reference the cell value in column 1 (Project ID). Something like this:
I have a simlple macro to add a new customer to a list using a form. One of the columns of the datra beig added is an email address. When entering the data the email address just appears as text, but i want it to be the email address link you could click on and it opens up an outlook email. Just clicking into the cell and tabbing out changes this into the format i want, but wondering how to i get the macro to do this?
Not sure if anybody has been succesful or not in the following but I am writing a macro to check that each hyperlink in my report is operational. My situation is as follows:
Cell A1 has the following hyperlink formula: =hyperlink(Worksheet1!B1,Worksheet1!B2)
I am attempting a workaround to capture the cell reference (B1) where the path and filename is stored and directing the macro to open the link. But when I try to send the hyperlink formula (Cell A1) to a string variable in vba, the result is the contents of Worksheet1!B2 instead of the entire formula.
I'm trying to use some data from other workbooks in a formula. However, the path to the other workbooks we are using will often change.
I think that the user can enter the path to the other workbook in a cell in this workbook. However, I'm getting errors in my formula and am not sure how to make the formula use the cell to reference the location of the workbook that has the data that we want.
'Instructions'!B9 contains the location of the other workbook in the format \path[filename] Planning'!$I$3:$I$100 is the location of the range in the other workbook.
Assume the following list of addresses are all in separate cells of a single column (A1-A4). I just need the formula to extract the street addresses, and then a separate formula to extract the zip codes.
5430-44 PASCHALL AVENUE PHILADELPHIA, PA 19143 OPA/BRT#: 884350845
4010 MARPLE STREET PHILADELPHIA, PA 19136 OPA/BRT#: 651087200
2618 SOUTH HOWARD STREET PHILADELPHIA, PA 19148 OPA/BRT#: 391251216
5737 WOODCREST AVENUE PHILADELPHIA, PA 19131 OPA/BRT#: 522155600
I have two worksheets, one with detail monthly information and one with YTD information. So let's say the three numbers I want to capture in the YTD sheet are in columns B, G and I on the monthly sheet. January's data might be in B5, G5 and I5. February's data is in B12, G12 and I12 and so on.
On the YTD sheet in cell C2 I link to Monthly!B5 and in C3 I link to Monthly!B12 so cells C2 to C13 on the YTD sheet show the monthly totals from column B on the detail sheet. On the YTD sheet, cells C20 to C31 show the monthly totals from column G on the monthly sheet, so cells G5, G12, etc. And finally, cells C40 to C51 on the YTD sheet show monthly totals form column I on the monthly sheet.
In the past I've always created all these links manually. After creating the links in C2 to C13 on the YTD sheet, is there a way to use a formula in C21 that uses the link in C2 to create a link for G5?
How to get Excel to automatically link address to company names?
Background information
I have started making a database in Excel and added company names and adresses in two seperate columns. Later I checked for duplicates by pasting in the company names from a database I have made before. Now, about 50% of the company names remained and so I want to remove the duplicate company names and adresses from the first file without sifting through them manually.
Example
File prior to duplicate check/removal (tab called 'Database' in attached Excel file):
Company name 1 Address 1 Company name 2 Address 2 Company name 3 Address 3 Company name 4 Address 4 Company name 5 Address 5 Company name 6 Address 6
*used another database (without adresses) to check for duplicate company names*
File after duplicate check/removal (tab called 'Database (2) in attached Excel file):
Company name 1 Adress 1 Company name 3 Adress 2 Company name 4 Adress 3Adress 4 Adress 5 Adress 6
The idea is to make Excel automatically fill in the adresses from the companies that remain after the duplicates check from the tab called 'Database' on the tab called 'Database (2).
I am struggling to find a macro which can look at a name in column 'BT' and search it in the address book of Outlook to then place the email address of that person in column 'ED'
There are 35,000+ people in the address book and there may be over 5 email addresses for one name, so is there any way a message can appear for the user to select which email address is correct if there is more than 1 contact for that name?
On a worksheet called "Contact Info" column A starting in row 2 I have a list of names (variable length). In Columns B2-D I need the email address, work phone number, and cell phone number.
I searched and I keep finding something that's not quite what I'm looking to do so I think I'm missing something really simple.
Let's say that I want each cell in col b to be the sum of 5 plus whatever value is in the cell adjacent to it on the left (col).
I know that you can just write a formula in each cell like...
b1 will be =sum(a1+5) b2 will be =sum(a2+5)
... but is there a shortcut so that you don't have to write out the actual cell address for each one?
Meaning - is there a predefined name or something that represents the cell to the left or right so you can just use that instead, allowing you to just copy paste the same formula all the way down the column? Something like...
b1 will be =sum(left+5) b2 will be =sum(left+5)
... where "left" represents whatever value is in the cell to the left of that particular cell?
I have a formula (AL15) to determine the address of the last column with a value greater than 1. =COUNTIF(C16:AC16,">=1")+2. I then use this column value to aquire the Absolute row "15" and the determined column=(ADDRESS(15,AL15,4)). This returns to me a Column value and row value that I need to use as a refference. How can I convert this returned value to a reference.
If a cell changes to true i want it to send an email to the address that is in another cell,
For example if F5 CHANGES to true then send email to address in G5,
From here i can add in the subject line, and body i just cant figure out how to get it to send to a specific email address based on the cell value, and also only do it once, when it changes to TRUE rather than everytime the sheet is active, so i would require a macro to constantly be running, or run of off the cell when it changes
I've a sheet that presents the profitability of sales locations in a geographic layout (similar to Tables in a restaurant), each sales location is a cell, with roughly 1,600 locations presented. Each location is colour coded based on performance / measure, in a basic thermographic way [e.g. dark blue for very poor, solid red for high performance] with users being able to change metrics and re-colour cells accordingly.
The sheet is already information rich, but I'm wanting to detect the cell address directly under the pointer and populate a text box or other cell based on the value in the cell directly below the mouse pointer.
My question is; Is there a simple way of detecting the mouse position on the XL Grid? nb. Want to avoid having to activate cell beneath pointer.
I have a column who's content is determined via about 6 nested if statements from data on that row. That cell is then conditionally formatted to a certain color based on the text that is ultimately printed from the nested ifs (simply an extra visual legend for the text). All of this contributing info and about 1000 lines items make a very large and difficult to print page. What I am trying to do is a make a summary sheet that simply takes the index number of these 1000 rows and copies or links the conditional formatting of the mentioned cell onto this number on another sheet. I have already linked this status cell and put it adjacent to the index number which works well in that with two columns I can show the index and status but if I could combine the color of the status cell onto the index cell, it would be even better. I am pretty sure another conditional format for this summary sheet would not be possible or be extremely complex since the contents of the index cell I am conditionally formatting have no bearing on the conditions for the format. Was hoping there is some VBA magic that could simply mimic the conditional formatting from one cell and put it on another.
I have a macro that inputs a sheet and cell from the user. when the macro tries to make a formula it outputs =data!'AE3'. I need it to output =data!AE3
Dim Sheet As String Sheet = InputBox("Take Data from where?") Dim startcell As String startcell = InputBox("Start Cell?")
How can you access a cell's value via a vb variable that contains the cell's address. I have a vb variable named cellAddress (string) that contains "$A$1" and I want to assign the contents of what cellAddress points to another VB variable - how do i Do this?
e.g. if cellAddress = "$a$1" and A1 contains "xyz", I would like to assigne "xyz" to a new vaiable by referencing just cellAddress??? Also - Can anyone reccomend a good Excel VB book? A book that maybe stresses the VB language rather then a cook-book approach.
I have this certain value "Y" in all the sheets. In the summary sheet, I would like to get the cell address for this value in a given sheet. I know that you can get cell address using CELL worksheet function. However, for that you need to know the reference to the cell, which is what I am interested in.
I tried Hlookup to get column #. But couldn't figure out how to convert the number to letter so that I can use MATCH to get row # and then finally, index or address function to what I am looking for.
If someone knows how to convert column # to column letter OR knows a better/easier way to obtain cell reference/address based on cell value,
I have an embedded chart on my worksheet.I can select a cell behind the chart using the keyboard arrow keys.Is there a way of doing this using a mouse click,so that I know which cell i am pointing to/choosing?
regarding the cell value. What i am trying to do is I have alot of cells with datas and in cell(1,8) I have a data. I will search through these cells and if they match with data of cell(1,8), it will return me the cell (x,y) with x and y being the row and col numbers. Is there any command that I can continue with the below code to get the x and y?
For Each cell In Range(Cells(3, 4), Cells(500, 26) If cell.value = cell(1, 8).value Then
I have a variable Num that covers the range of C5, C6, and C7. I would like to figure out how to write the code that grabs just the column portion of say C5.
Set Num = Range(Range("C5"), Range("C5").End(xlDown)) Something like,
Range(Column(Num), 3).Value or something like that
I have created the below formula to return an address. I need to use this address in the second formula ("cell address here"), If i am completely off base please point me in the right direction..
I would like to have a link in a merged set of cells that puts the insertion point to another cell. Scenario: In cell k30, the user puts in the amount of credit card debt a individual has, and scripts the user based on that information. Later on, they get a more accurate running total of the amount of debt and need to change the amount in k30 for an accurate quote. After ther running total, in cell j172(a merged box for instructions) i instruct the user to be sure to enter the new total in cell K30.
Questions: 1. Is there a way to put a button or a link that would put the insertion point back up to K30 automatically, but allow the user to change it themselves and not change it automatically?
I would like to ask if there's a way that i can create a link in a cell to another cell. Sample: in cell A1: there's a word "click to go to cell A150" in this case i dont have to use scroll down to go to cell A150.
I am trying to write a line for my little project but came to a stop as I do not have enough knowledge on how to get around this.
Most likely its something very simple but I'm not an expert so hopefully someone here can put me out of my misery.
I am trying to get this to work:
Function IF(AND(sheet!A1=sheet2!A1),x,y) works fine but for what I need to do I need to get sheet2!A(1+B1) As soon as I do that it all goes funny. In B1 I have a number that determines by how many cells A1 needs to be offset but I cannot get the syntax right.
I have a dataset with full addreses listed in one cell. I would like to use "text to columns" to separate the data but am unable to use the text separater in the wizard. When I open the text to columns wizard the data appears to be divided with a "square" but I cannot add it as "other" for the delimeter. see the attached.
