Userform ListBox Within Range To Add Addition Row Within Range Restriction
Apr 28, 2014
I can’t seem to add the “Insert New row” or where to add or maybe I’m not even doing it right. I have a worksheet with 4 column and need to only function in these columns as I have information doing something else.
In Column A, B, C and D are my main column for the following functions:
Column A will act as titles
Column B will act as sub titles (There can be multiple sub titles withing the same title, needs to be added on an as when requirement)
Column C will act as possition (There can be multiple position withing the same sub Title, needs to be added on an as when requirement)
Column D will act as sub position (There can be multiple sub position withing the same Position, needs to be added on an as when requirement)
All columns will react to what is in Column A. I have the following code for column A:
[Code] .....
This will look in my next available row to see if it is a blank row then add my information from my userform listbox.
I have tried to add the same procedure to my column B but don’t even come close to what I need in this function.
I need that when I double click my sheets cell in accordance to the following code:
[Code] ....
...to show my userform then to add the information but only to look in Column A to D and not pass this column.
I have added a Workbook to add the other information has it could get long to actually explain but to quickly explain:
I will need to add a title (already set up with a userform, listbox and on click of this listbox it will transfer the information to my sheet) This will look in my Column A to see where is my next available blank row and add the listbox value to it. If I double click column B, next to the columns A title, I need to add this information on the next available blank row but to create a Insert new row as there could be addition information going in column A or B and so on... I presume it will be the same code for C and D as this has to function the same way.
See Attachment for details and information : Book1.xlsm
View 2 Replies
ADVERTISEMENT
May 21, 2008
How can I fill a UserForm ComboBox or ListBox with cells from a dynamic changing range?
View 3 Replies
View Related
Aug 10, 2014
My Userform with combobox entries for product checks against the rowsource and if not on the list, is added to the list. the list is a named range in a Table that is used in a data model.
No matter which way I try I am regularly getting a corruption in the table that is home to the named range which is the rowsource... after one or two entries from the userform.
The rowsource is not bound to the worksheet, it is populated at userform_initialize procedure. (There are 4 combobox drawing from same rouwsource hence the loop through to check each)
debug points to the line at which conbobox value is being entered into the rowsource, though not always - it sometimes just crashes the whole file and everything needs restarting, upon which the table is fine and entry is evident.
I have tried resize, addrow to bottom of table variations and all result in the same core problem of a table corruption that crashes the file.
View 4 Replies
View Related
May 1, 2014
I have two lists mainly TV Brand & There Models.
List 1 (TV Brand)
Sony
LG
Samsung
Depended List 2 (Models)
Sony LG Samsung
EX420 55EB9600 PL43E450A1FXZP
EX430 77EC9800 PL43E490B4FXZP
EX550 55EA8800 PL43E400U1FXZP
EX520 KN55S9C UN32EH5300FXZP
EX645 55EA9800 PL64E8000GFXZP
I'm using two Listboxes (Form Control) with multiple selection options namely Listbox 1 (Brand) & Listbox 2 (Models). I want listbox 2 input range to be depended on selection made on Listbox 1 (Brand). For example, if user selects Sony then box2 should show only Sony's models and if user selects Sony & LG, box2 should show models for both Sony & LG.
View 3 Replies
View Related
Jan 19, 2009
I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
View 3 Replies
View Related
Aug 22, 2008
I have a listbox that displays the results of a search (from A:A) but it only displays the data from column A in my sheet. I would like to know if it is possible to display the data for the entire row in my listbox, is this possible?
Sub Locate( Name As String, Data As Range)
Dim rngFind As Range
Dim strFirstFind As String
With Data
Set rngFind = .Find(Name, LookIn:=xlValues, lookat:=xlPart)
If Not rngFind Is Nothing Then
strFirstFind = rngFind.Address
Do
If rngFind.Row > 1 Then......................
View 3 Replies
View Related
Dec 19, 2012
I have a spreadsheet with names of students, year groups, subjects and others. My VBA code will analyse student's results, but before I get there I would like the user to be able to select groups of students using listboxes.
Now I have a tonne of variables that I won't bore you with but the main thing I would like to do is to scan through each cell in a range on my spreadsheet and determine if the value of that cell is equal to a selected option in the listbox. This will let me, for example, filter by only Year 10 students, or select to display only Year 9 and 11 students.
I already have the code to scan through each cell:
VB:
'Run through each student and check they match the criteria
For N = 1 To StudentList.ListCount
'Split the first and second names
StudentName = Split(StudentList.List(N - 1))
[Code] .....
Essentially, I would like to take the cell "A" & N2 and check to see if it matches one of the selected options in a listbox called "YearList"
View 1 Replies
View Related
Apr 11, 2014
I have this code for a texbox to search into a listbox
It's working properly but sometimes it doesn't look at all the names in the list.. probably because some of the rows are hidden?
View 4 Replies
View Related
Jul 15, 2014
I have a userform with a ListBox and I'm trying to refer to each particular item in the Listbox for a range but it doesn't work.
[Code] .....
View 14 Replies
View Related
Jun 10, 2009
I have the two buttons on userform "viewer" that try to push the listbox past it min and max range. resulting in a error. Could it be that if listbox is at min it set the button to hidden.
View 4 Replies
View Related
Nov 14, 2012
I am trying populate a listbox on a userform using the range of a4:a:30 from a sheet entitle names. I can do this singly using the additem command, but I am not sure how I can add a range, or if that is possible. this is my code so far:
Code:
Private Sub UserForm_Initialize()
With LBoNames
.AddItem Sheets("names").Range("a1").Value
End With
End Sub
View 4 Replies
View Related
Aug 26, 2006
Attempting to populate a listbox from a worksheet range at runtime As far as I can tell the code is correct But the listbox returns results from ws("Data") not from ws("WA")
Sub comp_bs_AnalyzeAccounts()
Dim wbBook As Workbook
Dim wsWA As Worksheet
Dim rngWA As Range
Dim lngRows As Long
Set wbBook = ThisWorkbook
Set wsWA = wbBook.Worksheets("WA")
comp_bs_XTract
lngRows = wsWA.Range("A65536").End(xlUp).Row
Set rngWA = wsWA.Range("A1:A" & lngRows).................
View 6 Replies
View Related
Feb 4, 2008
What I am trying to do is for example Sheet 1 has a range of names A1:A20 and on sheet 2 on non contigious ranges some values from the range on Sheet 1 shown here and there. What I would like is on a form ListBox1 shows all names used in Sheet2 and on ListBox2 all names that were not used.
View 4 Replies
View Related
Jul 2, 2013
I am using a multi-column listbox on a worksheet. When I select an item from the listbox, the value from the listbox first column should populate the first empty cell in a range of cells L:16 to L:25. This should be easy but I cannot get it to function. Below is the code I used prior to modifications I made to the worksheet.
VB:
Private Sub ListBox1_click() 'allows user to select item from list box and paste to datagrid
Dim lngLastRow As Long
Dim lngcol As Long
[Code]....
View 6 Replies
View Related
Sep 30, 2013
I have a big sheet and i want to create a mask where i can insert a value and in a ListBox appears all accurrences of this value and the other in the same row.
I created a listbox where, with the RowSource proprety show me LAST row where there is the value i want. Now i want a list of rows not continous in the sheet. For example i have this sheet:
A1 Jim B1 23 C1 1998
A2 Steve B2 27 C2 2010
A3 Francis B3 23 C3 1992
Now i want to search all people with 23. So i want in my ListBox appears:
A1 Jim B1 23 C1 1998
A3 Francis B3 23 C3 1992
View 4 Replies
View Related
May 10, 2009
Hi if possible can someone please tell me how u populate a list box with three columns i want 1st col "A12:A209" 2nd col "B12:B209" 3rd Col "D12:D209" shown in it. Ive tried everything i can think of and cant get it to work
View 8 Replies
View Related
Mar 22, 2012
How I change the code below so that the ."AddItem" refers to a range within Sheet1?
For example .AddItem Worksheets("Sheet1").Range("O2:O20")
Code:
With ListBox1
.AddItem "January"
.AddItem "February"
.AddItem "March"
View 2 Replies
View Related
Oct 30, 2009
Have 2 listboxes, the contents of the second (fmmultiselectmulti) is populated based on selection of first. Sometimes (50%) when I open the workbook I receive a "Object Required" runtime error..
Private Sub ListBox1_click()
Select Case ListBox1.Value
Case "All"
ListBox2.ListFillRange = "_Sheet2!A1:A1"
Case "A"
ListBox2.ListFillRange = "_Sheet2!B1:B18" <--- example of line that gives the 424 - Oject Required
Case "B"
ListBox2.ListFillRange = "_Sheet2!C1:C18"
End Select
End Sub
Looks as though sometimes when it runs, listbox2 is not yet initialized ?? If I go into Debug and look at ListBox2 it shows up as type "Variant/Empty" and not " ListBox/ListBox" ??!!?? Is this some type of timing/race condition on the loading of controls ? I'm out of idea's. Both listboxes are on the same worksheet (Sheet1). The ListFillRange for Listbox1 (which is a fmmultiselectsingle) is hardcoded and also references a range in _Sheet2 - no problems with this control.
View 2 Replies
View Related
Jul 30, 2006
Attached is my basic test file. On sheet1 I've got a Dynamic Named Range of "RawData" ( I think I did that correctly.) The command button just opens a simple form with 3 listboxes. I want to display the Description in the listbox with the value of the listbox the ID, and filtered on Type.
I have sucessfuly figured out how to display the Description and capture the ID as the value for the All Items Listbox.
Here's where I need assistance. How do I filter the range and populate the other 2 boxes? I have been playing with the AdvancedFilter with no success.
Also, how do I resize the width of the listbox to correspond to the width of the Description column?
View 9 Replies
View Related
Oct 8, 2006
ListBox Transfer
I have created a Listbox with 300 products in it - The user can only select a maximum of 10 of them - these 10 products then need to be transferred to another worksheet beginning at the range B13 and ending a B22, Once these have been transferred the product number (eg 1 = Meadowmin 12) is then linked to a vlookup allowing further information of that particular product to be displayed.The vlookup is working
I have tried to use the Ozgrid sample (ListBox Transfer,xls) - works until the range B13, but does not continue to put the other 9 products below my first choice.
This is currently the code I am trying to work on. It keeps on counting 13 rows and then adding the product, it must count only to first 13 rows and thereafter remaining product below one another (max of 10)
Private Sub CommandButton1_Click()
Dim iListCount As Integer, iColCount As Integer
Dim iRow As Integer
Dim rStartCell As Range
View 9 Replies
View Related
Nov 6, 2006
I have a list of country names in a listbox that are populated using another worksheet that has these country names. When I make a selection in the listbox, I want the same country names to be highlighted in the worksheet. I will then be able to run a macro that takes those selected cells as input.
View 3 Replies
View Related
Mar 2, 2008
I want to do is to use a listbox userform control to navigate between sheets. Each listbox item is the name of a location, which can be dynamically created/added (by other means). Clicking the listbox item activates the corresponding sheet.
however, depending on the user-mode of the application, if the user navigates to another location, then they must return to the location from which they navigated. here's an example to make it clearer
0) user form initializes, populates Listbox = ( Loc1, Loc2, **Loc3** ) {asterix means 'selected/highlighted'}
1) user clicks 'Loc1': sheet for loc1 is activated; repopulate Listbox= (Loc3) {as must go back to from where user came}
2) user clicks 'Loc3' to return to last location: sheet for loc3 is activated; repopulate Listbox = (Loc1, Loc2, **Loc3**)
i have gotten it all working fine, except that for some reason in Step #2 (the return to initial sheet & items) neither.......
View 2 Replies
View Related
Apr 20, 2012
I am trying to use VBA code to take the relevant selections made to populate a Listbox and to insert them back into a cell range within the worksheet. The code I have come up with so far is:
Private Sub cmdApply_Click()
Dim i As Integer
Dim j As Integer
Dim StartRow As Integer
Dim EndRow As Integer
Dim StartCol As Integer
Dim EndCol As Integer
Dim temp
[code]....
The code should take any data within the listbox and insert the individual text into subsequent cells across the specified cell range. However, I keep getting various error messages. I have tried permutations of the code which do run but which copy a single entry from the listbox across the whole cell range!
View 5 Replies
View Related
Sep 6, 2006
i have several listbox with two columns in a userform in a sheet i have several columns whith values and i'm trying to put the values from the columns in the respective listbox. down is the code i wrote but is stressing with column command
Private Sub UserForm_Initialize()
Dim contar, j, i As Double
Sheets("Historico").Select
contar = 0
For j = 1 To 15
linha = j
For i = 3 To 65536
View 9 Replies
View Related
Feb 17, 2007
How can i populate a forms listbox from another workbooks named range? ....
View 9 Replies
View Related
Jul 23, 2006
I am trying to insert a listbox by the way of data validation and would
like
to only have unique data displayed in it. I was wondering if anybody
has done this before or if it is possible. I would like it to remove
any and all records that are blank.
This is what I have got so far.................
VBA Function UniqueItems(ArrayIn, Optional Count As Variant) As Variant
' Accepts an array or range as input
' If Count = True or is missing, the function returns the number
' of unique elements
' If Count = False, the function returns a variant array of unique
' elements
Next i
AddItem:
' If not in list, add the item to unique list
If Not FoundMatch Then
NumUnique = NumUnique + 1
ReDim Preserve Unique(NumUnique)
Unique(NumUnique) = Element
End If
Next Element
' Assign a value to the function
If Count Then UniqueItems = NumUnique Else UniqueItems = Unique
End Function
Then I input an array with a few duplicate Item and us the function to
determine the list. So far I found that it worked for the following
function:
{=TRANSPOSE(UniqueItems(A4:A27))}
but this only gives me the number of unique items in the array. The
problem is when I try to use the following function:
{=TRANSPOSE(UniqueItems(A3:A26,FALSE))}
This now only returns a zero and if I fill down they all are zero.
I would like to get a list of unique items from this formula. Example
list would be:
{Array = Lorem, Lorem, foo, bar, bar} {Formula_returns = Lorem, foo,
bar}
I haven't a clue how to display this in a regular excel cell box so I
thought that using a validation list box would inherently work.
View 9 Replies
View Related
Mar 14, 2008
I'm trying to populate a dropdown Combo Box by using conditions.
In the example I attached...I would be trying to use ComboBox1.ListFillRange to populate the ComboBox only with players who have "C" in the Position column and "ANA" in the Team Code Column. Which would give me all the Catchers on the Angels.
I've been trying to use worksheetfuntion.Index.
View 4 Replies
View Related
Nov 11, 2006
having trouble with the details of actually making these features work for me. I figured out how to create a UserForm with a ListBox and 2 buttons, but I don't know how to proceed from here.
1. Populate the ListBox in the UserForm with a list of names from the sheet "Totals_Dropdowns", cells K2:K11
2. Make the UserForm pop up and enter the user's selection into cell C40 of the "Regenerate Request"
I know these are very basic operations, and I'm pretty sure I can figure out the rest of my problems once I can get past the above.
View 7 Replies
View Related
Nov 19, 2008
make a calculation(addition) and use the answer to multiply against another addition calculation....
The sum of (Monday!A1:A4) multiplied by the sum of (Monday!B1:B4) plus (Tuesday!A1:A4) multiplied by the sum of (Tuesday!B1:B4) and so on.
View 2 Replies
View Related
Jan 5, 2010
In my User Form, one of the combo boxes has names. How can I restrict this box so the name chosen is the same as the Windows user?
View 14 Replies
View Related