I have created a userform and it works fine.Following code is assigned to commandbutton to transfer data to sheet "FT".
[Code].....
I want to add that : If value in combobox2 is “ KT” then all entries are copied to sheet3
Otherwise copy everything in sheet”FT”
Other parameters remain same.
I am trying to create a userform to allow user to register their new team member. In the userform, I have textbox1 (new team member) & textbox2 ( name of their leader). Once both the textbox has been filled, the user need to click on the commandbutton, which will then add the newly registered team member to the combobox1 in the Sheet1 and then create a spreadsheet(tab with the Team member name) in a separate workbook, which corresponde with the name of their leader (as filled in textbox2 in the userform.
View 2 Replies View RelatedMy question is, instead of deleting the row, how can I use the combobox to replace that row with the updated info rather than delete and resort? I have a combobox that selects names from a sheet, column A and populates itself on Userform activate/initalize. Using the Combobox to select a name, this code below populates all the fields on the form, various text and comboboxs.
When users hits the update button, it currently finds the row and deletes it, see second code example, but this reaks havoc on various parts of the program, I have to move the combobox and add name textbox's because when it deletes the row, the combobox takes on the next rowsource and then writes that info, rather than the info selected.
Private Sub ComboBox1_Change()
If bBlockEvents = True Then Exit Sub
If ComboBox1.Value = "" Then
Reset
bBlockEvents = True
ComboBox1.ListIndex = -1
bBlockEvents = False
Exit Sub
End If
userow = ComboBox1.ListIndex + 3
usercolumn = 1
If userow = "0" Then
ComboBox1.Value = ""
Reset
Else.......................
I am using the combo box that lists the loan officers number from the selection the loan officers name and branch is loaded. I want to be able also base on the officer selected add get the total new loans opened by that officer. I added an if statement that checks if the loan officers number from the "Oct_2012" is equal to the loan officers' selection from the combo box then add all the loans than match that criteria. I am not sure if what I am doing will work but when it reach to the For block it only reads the For statement and then go to the endif and don't execute the statement within the block.
Code:
Sub cmbLnOffNum_Change()
Dim idx As Long
Dim LnOffRow As Long
[Code]....
I thought I had finished my project but I keep getting errors, the latest one being that I have 2 comboboxes on userform "timekeeping". When I press the commandbutton "Submit", I want the values in the textboxes on that form to be placed in the spreadsheet, depending on what the selections the user has made in the comboboxes but I keep getting an error saying that the macro doesnot exist in the workbook even though it does!
The file is too big to upload here so it is found on rapidshare
[url]
I have a user form that has one combo box on it that right now references one column of data.
Now I am being asked to have three columns of data and the combo box to show one of the three when a certain criteria is met.
I believe it would be easiest to have an additional combox with a change event when the box is populated with "whatever" in the field
So S:3 to S:5 have A, B, C
And EC:1-EC:59, ED:1-ED:59, EE:1-EE:59 contain the data that should show when S:3, S:4, or S:5 is selected.
If S:3 is selected then the list in EC:1 - EC59 would show and so on.
I need to base a combo box / TextBox on the result of the previous combo box.
1. The first combo box is a simple 2-option: "New" or "Exisiting" choice
2. If the answer is "New"; I need a TextBox to show which would allow the user to input a code
3. If the answer is "Existing"; I need a second combobox instead of the text box which will allow a selection of codes.
I'm trying to get values to transfer from one cell to another based on whether the date in an adjacent cell is equivalent to the current date or not. I've tried using "Now" and "Date", but can only get my code to respond if the two are "<" or ">", I'm basically looking for a response for "=".
View 2 Replies View RelatedI'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.
Procedure GrpADA-QSI DescProcedure GrpAnesthesia And
Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And
Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And
Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And
[Code] ........
I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.
I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'
For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...
I am trying to transpher data between two userform.
The Idear, To store information within a list box on a userform and select what list items "information" is to be copyied to another useform's Textbox.
To have the 1st userform with a Text Box and one Button. When the user click the button the userform containing the listbox " information" is displayed. On this form the user can select an item "Information" that they want to be transphered into the other useform's textbox. (any information that is going into the textbox must only be added to the textbox information as a new line)
I am working on a Userform that will take the values entered in the first two text boxes (values for Columns A and B), enter them into the spreadsheet, and then display the values for the data in columns C and E in the next two text boxes. The data for columns A and B must be entered first since Columns C and E contain functions. And then, when the end user is finished for the day, I want them to be able to clear the values in columns A and B (which I have this part) Also, the data in column B will almost always be the current date, so I am not sure if that can be automatically populated on the userform or not.....I have played around relentlessly, so I know that I have really messed up the code I DO have, but here it is (I know it doesn't make any sense).
Private Sub Document_New()
frmUSAASLADate.show
End Sub
Private Sub cmdPickDate_Click()
frmCalendar.show
frmUSAASLADate.txtRcvdDate.SetFocus
End Sub
I created UserForm for people to enter there details into this form. I designed it ok, but i need it to, once it is filled in to copy what is entered onto a page in the spreadsheet.
So someone enters there details into a form that appears but then i need their details to appear on the spreadsheet at the click of a button.
I have a range of data that is compiled from various cells that I have named as Range1. I then have another named range - Range2 which should be items selected from range1 and copied into range2. This is to enable other work to take place.
I have created an example userform with Range 1 shown but do not know the code to copy it over using a command button. Range 1 should not change. Also vice versa if possible i.e. remove the selected item from Range2 with another button.
I am working with several userforms and try to transfer data obtained in one userform (lets call it Userform1) to another (Userform2).
Specifically, the idea is to have a commandboxA where the user can choose several options and the selection will define a string, and I want to use this string in Userform 2 to define a text.
Example:
The user chooses "solid" in the commandbox and I define the string as "rock"
Dim structure As String If commandboxA1.value = "solid" Then structure = "rock" etc...
And in Userform 2 I would like to combine the string structure with other strings, e.g.
If commandbox.value = "example" Then example text = "example text@ & structure & "text"
However this does not work, because the string which I have defined in Userform1 is not defined in Userform2. How would I define the string specifically, such that I have access to it in both userforms? How can I define the string as public? I tried several times, but could not get it to work.
I have a User form with a combo box that is populated with numbers (1 thru 50) and four text boxes for first name, last name, email & cell number.
It all works fine. However: I would like it to transfer the data to (Sheet3) in numerical order... In other words, If the user picks number 5 his data would be entered in the fifth row.(or sixth counting header). Or if he chooses number 37, his info would be entered into row 37 (38 with header) of (Sheet3)
It currently populates the next empty row.
My code is below, How would I modify it to accomplish this?
Code:
Private Sub EnterButton_Click()
'Populates GetNumber Combo Box
Dim w As Worksheet, x As Long
Set w = Sheets("Sheet2")
x = w.Columns(19).Find(Me.GetNum.Value, lookat:=xlWhole, LookIn:=xlValues).Row
w.Range("S" & x).Delete
[Code] ............
how can I build a userform to display all values from a row? in order to select a row, i was thinking to use a combobox to display values from one column and based on that selection, display all values in that row? the reason i want to use a userform is because i would also like to be able to edit that data.
View 3 Replies View RelatedI have a series of cascading comboboxes on a sheet named report. In the first combo box,cboCategory, the user will have the option of selecting New, Existing, 401k, CPA Information. If the user selects CPA Information I need a user form named CPA to open.
View 4 Replies View RelatedI need to populate two combo boxes from excel sheet, the data will be like below:
Column A Column B
A 1
A 2
A 3
A 4
A 5
B 100
B 101
B 102
So from the above data, one combo box should hold unique values A & B.
On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.
So the data should be like below:
If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5.
If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.
Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.
I have a userform that has a "payment type" combo box
This box consists of:
I have created a spreadsheet that is a roster to track mutliple crews and shifts.
I have a userform which is used to select a person on shift and assign them as being on either, Annual Leave, Personal Leave, Training.... on particular days.
I would like to have the shift combobox auto populate what shift the person is on based on the person and dates entered. All the information is there I just can't get the code to do this.
I was also thinking about blocks where the shift goes from DS to NS and if people are on leave over this time. I would need the combobox to know this also.
I have attached my workbook : New Annual Leave Spreadsheet.xlsm
I am looking to modify my combobox from a userform to Filter the list based on the first entry on what the user will add.
I have a code that will search for all entries in my "Control" sheet and passed this on to my combobox:
[Code] ......
I have, within a module, the following function code that the user find the entry by adding the first 3 letters of the search they need:
[Code] .....
I would like to know what to change in the function to filter the list, once the user adds a first letter and then press the dropdown from the combobox, to filter the list based on all entries from the first letter to only show entries with that letter.
If A is entered, then, show only the entries strating with the starting letter A, but at the same time if the user adds more letter to filter to the first then second letter:
If AB is inserted, then, show entries with AB only.
Where do I add this code also, is this another function or this could be inserted within my function?
Using my workbook i want to modify the entries of a worksheet. If u hit the Commandbutton1 , u can see that i have a userform with 3 pages.
The 1st page is to create a formula
The 2nd page is to modify the formula
The 3nd page is to delete the formula
What i want is the following:
1-Using the 2nd page I want to select a formula description and then to modify the description or the formula or both. After that, if i hit the Ok button to save it.
2-Using the 3nd page I want to select a formula description and then if i hit the Ok button and Delete the selected formula i want the bar to move to the previous row of the deleted one. Eg.: If i delete the row 10 i want the bar to move to row 9.
3-At last ,if u think that u have to change parts of my code and make it better go ahead.
So in this userform I am want it to add data to the main list of products. But, I ALSO want it to add to the specific list by selection of the data in the combo box.
It already adds the data to the main list. Now I want to be able to select the data in the combo box and have the userform data put in the specific combo box list.
In VBA editor it is the Inventory macro:
I want the macro to work exactly as it does right now, but I ALSO want the Combobox1 to dictate where Textbox1 and Textbox2 are added in a separate list on the products sheet.
I wanted to retrieve data from horizontal cells to the combobox i created on the userform.
I tried watching some code from other progs, but its not working.
From my combobox1, I want to go read the data from the sheet "TMATERIAL", range "b3:h3"
I have a combo box on my userform. The selection made in the combobox will eventually control a calculation. I would like to generate some code so that when the user makes a selection in the combo box, and fills in all the requied info on the form, they can click a button on the userform which will generate a new combobox on the worksheet which would contain the user selection, along with the array that populates the combobox on the userform.
View 3 Replies View RelatedI have a workbook with several sheets containing prices of products. One column has the product number and a second column has the price. We just received new prices. Can a macro read the product number from the new sheet, find the same product number on the old workbook and transfer the new price. and than change the price so I know it was updated.
View 2 Replies View RelatedI need to populate a combo box on a form with the column name (A,B,C...etc) and the first row data. I need the code to check all columns in-case of missing column data.
Its important to note the data will be dynamic. In my add in, a form opens on requests and asks the user which column he needs to action data on. this could be on any one of several non similar spreadsheets.
E.G.: Combox to hold the following data (see column D has no data or header row):
Column A - Date
Column B - Rep
Column C - Customer
Column D -
Column E - Product
How can i pass this info to the form ?
The macro below in its current state adds data entered from the userform to a specific sheet. I would like to change it so that a player can be selected from combobox named txtmplayer and the data entered be copied to that specific players sheet.
If this information is vital: There are 8 players. Player sheets can be named player1, player2, and so on. I would like to keep same method for entry (finds first available row)
Is there any way to set the list from a Combo Box to automatically start in the middle?
Whenever I select a Combo Box, the drop down list always automatically starts at the top of my selected range, ideally I would like it to start in the middle.
For example my Range that I am filling the Combo Box with lists dates: Today()-7 to Today()+7.
At the moment the first item in the combo box list is Today()-7, I would like it to be Today().
i need to be able to fill a combo box on a userform with the data on sheet1 and when you select the item from the combobox it will populate the textbox below.
View 5 Replies View Related