I want to populate a textbox (output) on one userform with data from a textbox (target) on another userform.
The data in the textbox (target) is the result of calculations in the userform code and is not gathered from or saved to a cell.
I want the textbox (output) to be populated at "Userform intialize" event.
I have tried various other methods without any success.
Userform1 is a basic search and find using the text the user enters in a text box, followed by 'ok' commandbutton.
If a matching cell is found in the worksheet, the row is selected and the second userform asks for text via textbox2. This text will be placed in the end column of that row (column L) that was found to have the text input in Userform 1.
What's important is that if on that row some text already exists in column L, that this appears in textbox2 allowing the user to modify it.
I'm ok with the search and find :
I am trying to populate (via VBA) a textbox/combo box from one user form to another user form.
The first user form has a room number in a text box1. If certain conditions exists, a button is selected to bring up another user form (both forms are modeless).
I want to pass/populate some of the 1st user Form info into the other user form.
I have tried the on initialize textbox1.value = textbox other.value but no dice. I can populate a user form text box from a spreadsheet but from box to box in separate user forms has me a little stumped.
I have a userform that pops up upon opening a file. The user form has
5 text boxes names Zero, Two, Four, Seven and Nine. I would like each of these text boxes to automatically populate with the values last used. The values last used are stored in Worksheet "Index Settings" in Cells "C3:C7".
I've created a userform to populate rows in a worksheet. The userform gets details of flights with inbound and outbound dates. I'd like a calendar to popup so the user can just select a date with the click of the mouse which then resides in the textbox until sent to the sheet. I know how to get the calendar to pop up when entering directly into the sheet but I don't want the user to have to touch the sheet unless making amendments.
View 9 Replies View RelatedI need to populate the textBoxes from the selection from ComboBox I've created in a UserForm. I have attached the file that I was working on. I want to be able to keep selecting then populate the text box until I have finsihed.
View 2 Replies View RelatedA textbox on a userform is populated through cell references which have formulas. Works OK. I want to change this by getting rid of the formulas in the cells and have the textbox populated by a name. The following formula is entered in the "Refers To" box =DEGREES(ATAN(RADIANS(ATAN2(Sht1!$G$34-Sht1!$G$33,Sht1!$H$34-Sht1!$H$33)))*(LastDep-Sht1!$G$33))+Sht1!$H$33
The name is "TopLine" (without quotation marks) When I enter =TopLine anywhere in the worksheet, it gives me the proper answer. I have been trying to populate the textbox with "TopLine" but without success. I tried a listbox but that doesn't work either. I have exhausted the search possibilities (I think).
I am working on Excel 2010 and am still new at this
Attached is a UserForm with a Multipage
I have added TextBoxes to Page 1 to Page 3
Here is my problem
The Macro to show the form is not working.Also I need to populate TextBox1 with information on the "Data" sheet.
TextBox1 must show information in C3
TextBox2 must show information in C4, and
TextBox3 must show information in C2
I have tried some VB on the TextBox but it does not update, not sure if i need a command button.
I have a userform which inputs data based upon a chosen item from a combobox. Combobox3 pulls numerical items from Rows17 and below in columnA of active worksheet. The first problem I am having is that the combobox itself is cutting numerical numbers short. Items go out to the thousandths (ex. 1.001) but in cases where there is a "0" at the end of the decimal it abbreviates it (ex.1.01) is there anyway to fix this? The second issue is I would like to populate "Textbox4" with the columnC content of the item chosen. (Ex. User choses Item 1.001 (found in row118) then Textbox4 would = the value of C18) Below is the current code utilized for this userform.
View 6 Replies View RelatedI have a table with huge amount of data. I use a UserForm with textboxes to populate the information of the required row.
There's a Comment Box text on a specific cell that I need to populate on one of the textboxes but I am unable to do it.
The code I have that works well, populates the cell content:
[Code].....
Now, on that cell, there's a comment text that I need it populated as well on another textbox but it doesn't work. I tried:
[Code] .....
But this doesn't work.
I Have a Userform which Have My Data i Print User Form Using Print Command Button And My Code Is
[Code] ......
But Its Printout Whole Form I only Wants To Print contents of Text Box's Or only Text From Userform TextBox. How To Print out Only Content of User Form Not The Whole Form ...
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
Code:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
View 1 Replies View RelatedI am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?
In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.
I was trying to guess the code... but it is not working...:
UserForms("Userform1").TextBox1.Value = UserForms("Userform2").TextBox2.Value
See attached for explanation of what I need. I basically need a user form to appear asking for an specific time and services provided and transfer this data into another sheet. In sheet 1 there will be several time codes in pink for each service provided.
View 9 Replies View RelatedI want it to populate a combobox in a userform. Should it go in the code segment for the userform, in a module, or some other place? The following is code I originally found (by Leith Ross of this board) to find the last row in column "A", and load the combo box "ComboBox1"
View 3 Replies View RelatedI have some textboxs and some comboboxs, on a user form I want them to populate according to the row the cell is selected on.
Example:
cell c15 is selected,
UserForm1 Textbox2 populates with value of A15
UserForm1 Textbox1 populates with value of D15
UserForm1 Combobox2 populates with value of F15
And is the user changes a value I need it to update the cell.
I am searching a database for a particular date and want the data corresponding to that date to be populated into a userform. So in short I want the data to be displayed in the userform. I am looking for ideas on how to do this efficiently. I currently do it with a list box, but it is only able to display one column of information. I hope this is clear.
Want to tab to next textbox in a userform.
Sample workbook has a userform with 4 textboxes.
When I enter something in textbox 1 and then try to tab to the next box, it tabs within the same box.
Attached sample : Form1.xlsm
i have a tabbed userform, that has 13 text boxes on each ,
how can after i have updated one tab unload to a specific cell in excel ?
textbox1 i need value when i "Unload" to b $F$6
textbox2 will be $F$7
textbox3 $F$8
etc etc
but i have no idea how to do this , i have a cmdbutton on bottom ready to unlaod to excel , can anyone start me off on right tracks
also is there a way to when this sheet is opened this userform is shown
When I put order number into "txtOrder" it finds that order and populates the labels in userform. But the problem is, it populates only first row with that order number. How to show all other rows with the same order number in userform labels?
For example : i want to find all rows with that order number and populate them into labels like that:
(Order number -123456) lbl1 = cellA1; lbl2 = cellA4; lbl3 = cellA3; lbl4 = cellA5; lbl5 = cellA10; lbl6 = cellA7
(Order number -123456) lbl7 = cellB1; lbl8 = cellB4; lbl9 = cellB3; lbl10 = cellB5; lbl11 = cellB10; lbl12 = cellB7
(Order number -123456) lbl13 = cellC1; lbl14 = cellC4; lbl15 = cellC3; lbl16 = cellC5; lbl17 = cellC10; lbl18 = cellC7 and so on....
I would like to populate the captions of checkboxes in a userform with the items listed in a drop down menu located in cell A1. Lets just say I don't know exactly how many items in the dropdown there will be, but I do have an estimate number. Maybe between 20 and 25.
View 9 Replies View RelatedWhat I am trying to achieve is to get the UserForm to populate from information in the Database. In column AD I have a formula which produces a number when an item becomes due. I would then like label1 (lblReg1) to populate data from the same row in column A and label2 (lblDate1) from column S.
I then have a CheckBox (chk1) next to each pair of labels for the user to confirm the task has been actioned and when the CommandButton is clicked I would like the result placed in column AE in the corresponding row.
I have tried utilising code from another userform I have but I cant get it to work and I believe this is to do with the 'ActiveCell' reference as there is no Activecell (you can probably guess I am new to this). Example:
Sub UserForm_Initialize()
If Sheets("Database").Range("AD3:AD5000").Text = 1 Then
lblReg1.Caption = ActiveCell.Offset(0, -29).Text
lblDate1.Caption = ActiveCell.Offset(0, -11).Text
Me.chk1.Visible = True
End If
End Sub
(All the Labels are blank and will be filled hopefully by code, all the CheckBoxes are set to Visable = False at Initialize stage, I will be using Me.Height = ?? to expand the form to visible check boxes)
I have attached a small selection of my workbook where I have set up the userform and named the labels.
Can anyone amend the code to achieve the desired result or alternatively put me straight on the correct way to do this.
I've found a great userform on this site that allows you to populate a datasheet as well as delete or amend datasheets. It was by dodger7 within Database. Very useful. I've adapted this to my needs and it works great apart from i cant amend the userform that shows data when you select delete or amend. I've had a go but don't understand how i can create my own feilds and set it up in order. When i go in to the code i can veiw the delete and create/amend userforms but this is a search function relating to a reference number. Once you select Find it brings up another form and that is the one which i need to adapt to show my new feilds. I have attached the sheet so you can see my problem. I was wondering if anyone can advise as i love this userform/database method but can't complete the changes to my needs.
View 2 Replies View RelatedWorksheet1 has data, with a cmdButton that opens a UserForm. When the UserForm opens, some txtFields(in the UserForm) are populated based on the data from Worksheet1. The issue is, if we change the data on the worksheet1, we have to open and close and open the UserForm to have the txtFields populated.
View 7 Replies View RelatedI want to create a user form to allow users to put in 26 values and then have the values populate certain cells within the spreadsheet.
I have attached a sample, I know how to create the form, I'm just not sure of the coding I would need to use?
I have this UserForm I need to clean-up but can't figure proper ways of doing it.
There's 2 ways to call the Form:
1) The main Sheet has a Command Button that calls the blank Form, which allows the user to enter & select data to be submitted to the sheet (using combo boxes, etc.).
2) If the user wishes to modify an existing entry on the sheet, he must click on it. This will call the Form which will be populated with the existing data on the sheet (per Row, since the Form enters data one Row at a time).
My problem is that I can't figure a proper way to Initialize my Form to either be blank (as for option #1), ie. have no pre-entered or pre-selected data in it, or to be filled with pre-existing data from the sheet (#2).
I tried to handle this by setting my ActiveCell = A1 when my CommandButton is pressed and check it when Initializing the Form (to initialize for #1 instead of #2), but that's totally not working.