Userform1 is a basic search and find using the text the user enters in a text box, followed by 'ok' commandbutton.
If a matching cell is found in the worksheet, the row is selected and the second userform asks for text via textbox2. This text will be placed in the end column of that row (column L) that was found to have the text input in Userform 1.
What's important is that if on that row some text already exists in column L, that this appears in textbox2 allowing the user to modify it.
I am trying to populate (via VBA) a textbox/combo box from one user form to another user form.
The first user form has a room number in a text box1. If certain conditions exists, a button is selected to bring up another user form (both forms are modeless).
I want to pass/populate some of the 1st user Form info into the other user form.
I have tried the on initialize textbox1.value = textbox other.value but no dice. I can populate a user form text box from a spreadsheet but from box to box in separate user forms has me a little stumped.
I have a userform that pops up upon opening a file. The user form has 5 text boxes names Zero, Two, Four, Seven and Nine. I would like each of these text boxes to automatically populate with the values last used. The values last used are stored in Worksheet "Index Settings" in Cells "C3:C7".
I've created a userform to populate rows in a worksheet. The userform gets details of flights with inbound and outbound dates. I'd like a calendar to popup so the user can just select a date with the click of the mouse which then resides in the textbox until sent to the sheet. I know how to get the calendar to pop up when entering directly into the sheet but I don't want the user to have to touch the sheet unless making amendments.
I need to populate the textBoxes from the selection from ComboBox I've created in a UserForm. I have attached the file that I was working on. I want to be able to keep selecting then populate the text box until I have finsihed.
A textbox on a userform is populated through cell references which have formulas. Works OK. I want to change this by getting rid of the formulas in the cells and have the textbox populated by a name. The following formula is entered in the "Refers To" box =DEGREES(ATAN(RADIANS(ATAN2(Sht1!$G$34-Sht1!$G$33,Sht1!$H$34-Sht1!$H$33)))*(LastDep-Sht1!$G$33))+Sht1!$H$33 The name is "TopLine" (without quotation marks) When I enter =TopLine anywhere in the worksheet, it gives me the proper answer. I have been trying to populate the textbox with "TopLine" but without success. I tried a listbox but that doesn't work either. I have exhausted the search possibilities (I think).
I have a userform which inputs data based upon a chosen item from a combobox. Combobox3 pulls numerical items from Rows17 and below in columnA of active worksheet. The first problem I am having is that the combobox itself is cutting numerical numbers short. Items go out to the thousandths (ex. 1.001) but in cases where there is a "0" at the end of the decimal it abbreviates it (ex.1.01) is there anyway to fix this? The second issue is I would like to populate "Textbox4" with the columnC content of the item chosen. (Ex. User choses Item 1.001 (found in row118) then Textbox4 would = the value of C18) Below is the current code utilized for this userform.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
Code: Private Sub cmdSearchButton_Click() Dim txtbox As String 'stores lookup value Dim x As Variant 'value for wwid txt box Dim ForeName As String Dim SurName As String Dim wwid As Variant Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
I am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?
In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.
I was trying to guess the code... but it is not working...:
I have a userform with a combobox and a textbox, I would like that when I click the dropdown on the combobox I can pick an item from a list found on a spreadsheet in column A. This spreadsheet has two columns of data A & B. I would like to automatically populate the textbox with the data (from Column B) based on what was chosen in the combobox for (column A).
Example A B Don $5.00 John $6.75 Jerry $4.75
If I was to pick John in the combobox, I would like for the textbox to populate with $6.75.
I have a userform with multiple textboxes and comboboxes, the contents of which are saved to a database sheet, each time on a new row. Everything else is now all set but I still need to create a unique id number for each entry. I set the value of the textbox in question to the last cell value in the id column incremented by 1 in the userform_initialize but for some odd reason it doesn't work. However, if I use a direct reference to a cell it does work. Here's my Private Sub UserForm_Initialize()
1) I have a user form that picks data from a spreadsheet - This is for scheduling a course. Works fine
2) I have a second form which should do 2 things: a) On the bottom half of the form, select people from sheet 'Staff'. Works fine b) On the top part, I would like to select a course (using combo box) and fromt this select a date for when the course has been scheduled (from sheet 'Scheduled Courses'). Courses are run a few times so have multiple entries. With some help, have done this and it works well
The problem is that when I select a date for a course using combobox2, I would like to populate the text box 6 & 7 with the cost of the course and the location. This goes wrong as it starts taking cost and location from the first cell. Eg when i select SPIN Selling, all is fine as this are the first courses. However If I take 7 Habits, it gives me costs for SPIN. If I take OM, it still gives me costs for SPIN. The dates in combo box 2 appear fine
What I've done so far is... Created two buttons (Add and Find) in my Excel sheet1. If I click my Add button Form1 opens. In Form1 the user enters a number of values that are inserted into sheet2 of my Excel book. If I click my Find button Form2 is displayed. This form contains a multicolumn textbox that shows some of the columns from sheet2 that have values in them. Now to my BIG problem....
I would like to be able to select a row in my multicolumn textbox, click my OK button there and then Form1 should be displayed with ALL the values from that particular row from sheet2. As I mentioned I'm very new at this and I'm not even sure how to do this logically and much less the correct code for it. I hope that someone could thoroughly explain to me what I have to do and why to be able to get this working.
Private Sub UserForm1_Initialize() Dim rIds As Range Dim MaxId As Long Set rIds = Worksheets("Systemtest").Range(Cells(1, 1), Cells(Rows.Count, 1).End(xlUp)) MaxId = Application.WorksheetFunction.Max(rIds) With Me .IdBox.Value = MaxId Private Sub DateBox_Change() DateBox = Format( Date, "yy/mm/dd") End Sub.....................................
I Have a Userform which Have My Data i Print User Form Using Print Command Button And My Code Is
[Code] ......
But Its Printout Whole Form I only Wants To Print contents of Text Box's Or only Text From Userform TextBox. How To Print out Only Content of User Form Not The Whole Form ...
I've done define name to read column C until G in 1st row, N define another name from column C until G in 2nd row.For example; NameRanges for "Year" =OFFSET(Sheet2!$C$1,0,0,1,COUNTA(Sheet2!$1:$1)-2), for "Thickness" = OFFSET(Sheet2!$C$2,0,0,1,COUNTA(Sheet2!$2:$2)-3)
I want to display list of year in combobox and then, when the user click on the first item in combobox, the textbox will display the value that correspond to the combobox. For example; when the user click Year = 1990 in the combobox, the textbox will take value from excel and display thickness for year 1990 which is 4.
This is my code, the code in UserForm_Initialize is working. unfortunately, coding to display value in TextBox1, doesnt work.
I need to populate a textbox based off 2 combobox selections. My first combobox selects the worksheet. "08BOG, 09BOG, 10BOG...15BOG" My second combobox lists majors based off of the worksheet selected in combobox 1. I need my textbox to populate the value 18 rows over the selected worksheet and the selected row.
Currently I have something like this:
[Code] ......
But obviously this is all wrong because it is only referencing one sheet instead of the selected sheet in the combobox.
I have a listbox1 which lists items from a rowsource, when i click on an item within the listbox i would like to call the value from another cell and populate into textbox1 on the same sheet1.
I have attached an example set up with a user form I am building. I currently have the first combo box loading upon the initialize of the user form an from that I choose one of the product types and it gives me a list with all product names associated in the second combo box. Upon a change event in the second combo box I want to populate the 3rd Column with the count of how many of that Product type.
I have a couple different code set ups in the attached sheet and neither works.
why the text box "txtjobnum" wont populate with the active cell in my "COMPLAINTS" sheet. The green code below is in the userform and the red text below that is in module 3.
I have this code inside a userbox to auto populate a textbox on the same form, the combibox info is located on row E, and it populates the textbox with info off row G, but how can I change this to pull the info off row C instead of G???
Code: Private Sub ComboBox1_Change() var1 = WorksheetFunction.VLookup(ComboBox1.Value, Worksheets("Basic").Range("E11:G90"), 3, False)
I have a userform with one textbox and one combobox in EXCEL.
This userform is connected to a small data base (one table with 2 columns).
Combobox is populated with the values from the first column of databasqe table.
I like when the combobox is changing the textbox to be automatic populated with the corespondent value from the second column.
I have the following code but it is not working:
Code:
Sub PopulateTB() Dim rs As Recordset Dim db As database Dim SQL As String Set db = OpenDatabase(ThisWorkbook.Path & "materiale.mdb") SQL = "SELECT values_col2 FROM table_db WHERE values_col1 = " & UserForm1.ComboBox1.Value & ";" Set rs = db.OpenRecordset(sql)