I have below code which I was thinking is very simple to select variable worksheets. However I get Debug error when running:
Code:
Dim rng As Range
Dim cl
Set rng = Sheets("Budgetted sku's").Range("A2:A24")
For Each cl In rng
Sheets(cl.Value).Select
Next cl
I want to make a range variable ("testrange") that I can use to define a range of non-continuous cells and then use that range variable to select that range of cells in different worksheets within the same workbook.
I tried the below code (simply coloring cells red), but get an error when I try to select "testrange" after moving to the next worksheet.
[Code] .....
The next worksheet is also supposed to have the same range of cells colored red, but I can only get it to work on the first active sheet.
I would like to avoid having to repeatedly rebuild the range I want selected each time I move to a different worksheet.
I have a working Excel 2007 macro that accesses two worksheets. I then added a third worksheet and want to access it from the macro. I get a debug error 13 Type Mismatch when the macro tries to access the third worksheet. I know I need to add the third worksheet on a pop-up but I don't remember how to open it.
View 14 Replies View RelatedThe code thats generating the error is the following:
For Y = 8 To 131
TmpDate = Empty
Range("A1").Value = "=" + Path + Sheet + "B" + CStr(Y)
TmpDate = Range("A1").Value
For Langd = 1 To Len(TmpDate)
TmpChar = Mid(TmpDate, Langd, 1)
If Not TmpChar = " " Then
TmpComp = TmpComp + TmpChar
End If
Next Langd
TmpDate = TmpComp
TmpComp = Empty
If Len(Dag) = 1 Then
Dag = "0" + CStr(Dag)
End If
Macro continues before the Next-statement...
(it might not be good programming, but I think it should work).
A little explanation to the code.
I have a spreadsheet located on the intranet that has values I need in my spreadsheet. These figures are sorted by date, so I search for the date to find the right figures.
The line Range("A1").Value = "=" + Path + Sheet + "B" + CStr(Y)
works prefectly. I can see the value in my spreadsheet in the cell A1. its the next line that causes the error "Type mismatch".
The value I get from the intranet spreadsheet looks similar to this:
"1 Jul 2006 " (note all the spaces).
What I do is just run it through a loop and cut of all spaces so it will look like this: "1Jul2006" to be sure I dont miss a space or anything.
Now to the funny part.
The error only happens at runtime on the first go.
If I chose to END the macro then and there, and then run it again from the top it works perfectly.
If I set a stopsign to debug the code, it works perfectly on the first go too.
Can anyone explain to me why that happens??
I know enough about programming to handle my syntax errors and so on, but I cant see anything wrong in this one...
Please note that this isnt the the entire code.
I'm building a report on 12 diffrent spreadsheet. The main macro is almost 2000 rows of code, and it call other Subs too (because of limitations in the VBA-editor. A macro cant to be too big), so its impossible for me to post the entire macro...
I am trying to take the template I have created and after the information is entered, if all required is not filled in, it will highlight the cells that need filled in. I get a debug error on
VB:
Cell.Interior.ColorIndex = 6
And the file does not save elsewhere. It goes into never never land. Here is my whole code:
VB:
Option Explicit
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
Dim Start As Boolean
[Code]....
I created a long macro as follows with 2 Select Case structures and the macro works fine.
View 14 Replies View RelatedI have code that selects and copies data from one sheet onto another sheet. the sheet that is getting data copied too has borders defined. When i run the code i get a debug error. Here is the issue.... when i remove all the borders it works fine. I have tried everything i can think of to solve the problem but have had no luck. anybody have an idea what is causing this. i attached the workbook file so you can see what is going on.
View 2 Replies View Relatedi m working on an excel 2007 workbook with ms project functionality. in order to be able to use ms project from within excel i m using early binding. for those who dont know what early binding is: http://www.dicks-clicks.com/excel/olBinding.htm
this works fine if the user has ms project installed on his/her pc.
if the user does not have ms project installed i remove the broken references. this works fine.
but my problem is that when i remove the reference to ms project, my vba project will not compile correctly. thus each time when a user opens the workbook the user gets a "compile error in hidden module" , since the functions of ms project are not available.
for example i get a compile error in the following source
Public Function getResID(ResName As String, ActiveProject As Project) As Integer
Dim res As Resource
For Each res In ActiveProject.Resources
If res.name = ResName Then
getResID = res.ID
Exit Function
End If
getResID = -1
Next
End Function
i just want to know what i can do to prevent the compile error? would the use of late binding remove the problem? actually i dont want to use late binding since my source code is already very complex and it would be a huge effort to change it.
How do I modify this macro so that the worksheet array will select all the worksheets except sheet 1?? My workbooks will have varying numbers of worksheets ...
View 3 Replies View RelatedThe two code extracts below are associated with two separate worksheets in the same workbook. They work fine. They simply are used to assign either a PO# or a Temp Unit #, located in a third sheet, in their respective sheets.
The problem is that when I'm in either the Master or the Work Orders sheets where these two codes are used, and I do something simple like drag down some values or paste something in a cell, I get the "Run time error "13" type mismatch error" in the popup debug window for my VBA code. And in each case, it highlights the codeline I've color coded below:
I'm fairly new to macro's and VBA, by searching on the internet i've copied and pasted some code together into a macro.
But it ends in a Run-time error 91...
The macro opens a target .xls file in a selected folder, performs copy - paste actions from masterfile to targetfile.
Than it filters data in the targetfile sheet1 and copy's the results to the various other sheets; saves and closes the targetfile.
The next target file in the folder is opened and the actions are repeated in this second target file.
For the first target file this works smoothly; but for the second one (of a total of around 100) it does not copy the filter results to the other sheets in this workbook.
The error message i get is: "Run-time error 91:Object variable or with block variable not set."
When i hit debug it highlights the line "ActiveSheet.Next.Select" which, at least in the first file, seems ok.
I've successfully copied the array of equations using the VBA that Pjoaquin enlightened me with from my last thread. The outcome was Sheet2!A2:O2 being successfully populated with the equations from my first sheet... but here comes the problem: I'm looking to autofill A2:O2 down to the last record in Column P. But the number of records in this table is varable.
View 2 Replies View RelatedI want to copy a range where the row is variable (i in the Loop I'm doing) but the columns stay the same. What am I doing wrong?
Workbooks("Labor Info").Sheets("Transfer").Range("A" & i & ":E" & i).Select
I need to select starting with:.
Columns A-O
Rows 1 - ( LR of ColB - Col A is empty )
I Wrote a code which as intended to open each excel file in a folder and copy the data containing in it into a new sheet.
But While running the code the first excel file gets open, and an error message "Run Time Error 91-Object Variable Or With block Variable not set Error"
How to set the file which got opened from the folder to wbk variable.
Code:
Sub dataintoonesheet()
Dim i As Integer
Dim jk As Integer
Dim j As Integer
Dim rowstart As Integer
rowstart = 3
[Code] .......
When i try to run the code below i get the error message - object variable or with block variable not set-
Sub REFRESHXX()
'LIST
Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select
Selection.AutoFilter Field:=1, Criteria1:="1"
'SET RANGE
Dim sFormula1 As String
Dim sFormula2 As String
Dim sCell1 As String
Dim sCell2 As String
Dim sSheet1 As String
Dim sSheet2 As String
Dim r As Range
Dim MyRange As Range 'for testing
With Sheets("Points")
sFormula1 = .Range("CY1").Formula
sFormula2 = .Range("CY2").Formula
End With
'FORMULA IN R1C1 STYLE
strFormula = "=IF(ISNA(VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE)),0,VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE))"
'ENTER FORMULA IN ALL CELL RANGES
r.FormulaR1C1 = strFormula
'REDUCE TO VALUES
Dim ar As Range 'an area is a range
For Each ar In r.Areas 'areas are discrete, contiguous ranges of cells
ar.Value = ar.Value
Next ar
'UNLIST
Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select
Selection.AutoFilter Field:=1
End Sub
I'm trying to make a macro'd button that when clicked will select the cells A1:A?? where ?? is equal to the value in cell B1
B1 is a variable number that changes to be the proper amount of rows that I require selected.
It's always A1 down to A9 minimum and A1 down to A400 max.
Once selected I need the macro to copy the selected cells to the clipboard for another application to be able to paste that info.
So far I've been able to get the copy command to work and the range command to work but can't seem to figure out how to put the variable number from B1 into the range command.
I've made a macro and spend some time making it work across different sizes of data. The last issue I'm having is after the macro sorted out some data, that it will then delete, it has to select the first row and shift select down before deleting it. However, depending on how the data is sorted, the first row could be 9, could be 10 and so on. See below for my code.
Code:
Sub Macro1()
Windows("statistik.xls").Activate
Range("A8").Select
[Code]....
If the first row in my data set is not one of the 3 criteria ("Personligt ejede virksomheder", "Privat", "Reklamebeskyttet"), then the first row # will be 10 instead of 9. If the first two rows are not one of the 3 criteria, then it would be row 11 and so forth. How do I make my macro take this into consideration?
I require vba code which will allow me to select a range of variable size.
Starting from cell A2 use :
Range(Selection, Selection.End(xlDown)).Select
However then using the line below may not select the entire range as some columns may be empty
Range(Selection, Selection.End(xlToRight)).Select
I am trying to enter code into a Macro that will select a range and then put a subtotal at the bottom of the range.
I have values in col D & E that I am multiplying together in column F. I then want the macro to select a range from F2 to the last Value in col F and then put a total in the next cell down (in col F). The range needs to be variable.
I have a workbook that generates sheets for each year based on selected criteria. It starts at Column H and goes too AH and beyond. When my loop reaches Z it errors out. I think this is happening because the code is referencing the column as ASCII. Here is the
Sub Test()
Dim d As Date
Dim yrint, i, num_years, fields, field_start As Integer
Dim yrstr, crit1, crit2, left_column_range_fixed, right_column_range_fixed, left_column_range_var, right_column_range_var, left_column_range, right_column_range, cost_column, cost_column_var, cost_column_fixed As String
left_column_range_fixed = "H"
right_column_range_fixed = ":AH"
cost_column_fixed = "2"
crit1 = "=x"
crit2 = ">0"
d = Date
yrint = Sheets("Overall"). Range("H2")
field_start = 9 'changed from 9....................
I am getting error in Set MyRange
[Code] .....
I attempted to modify "macro_1a1ay" to look into the "comments" sheet (column a) for a specific text string. If that text string is found, I have it delete the entire row, then re-sort the page and return to the calling page. It works well as long as it finds something. When it does not find the string (i.e. like now when the page is blank) it gives me the run-time error mentioned above.
View 7 Replies View RelatedI am having a lot of trouble finding out why I am getting error. I believe the error is because it can't find the number. In cells C115:C314 i have the numbers 1 to 200 in order. when someone types in 1 to 9 in the text box it works, but on 10 and over i get the error ???? here is the code I have
shCalculator.Range("C115:C314").Select
Selection.Find(what:=CInt(txtPackageID), After:=ActiveCell, LookIn:=xlValues, LookAt:= _
xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Select
x = ActiveCell.Row
shCalculator.Range("ProposedMeter").Value = Cells(x, 7).Value
shCalculator.Range("Package").Value = Cells(x, 12).Value
shCalculator.Range("ProposedMeterAmount").Value = Cells(x, 30).Value
shCalculator.Range("Term").Value = Cells(x, 62).Value
shCalculator.Range("Discount").Value = Cells(x, 67).Value
shCalculator.Range("Equipment").Value = Cells(x, 72).Value
I have two macros that run fine separately. I want to join them, but when I do I get an Object variable or With block variable not set error.
Here's the code
Code:
Sub border_highlight_insert()
' Change heavy border to new column, change tint - keyed to year A6
With ActiveSheet
Dim i As Integer
[Code]....
This works fine in Excel 07 but when ran in 03 it doesn't work and I get that error message.
Sub mcrRefresh2()
Sheets("WeeklyData").Range("A1").ListObject.QueryTable.Refresh BackgroundQuery:=False
Sheets("WeeklyData").Range("aa1").ListObject.QueryTable.Refresh BackgroundQuery:=False
Worksheets("WeeklyPivot").PivotTables("PivotTable1").PivotCache.Refresh
End Sub
I am getting an error at this line:
Set rng5 = Range(.Cells(celle2.Row, celle4.Column), .Cells(celle2.Row, celle4.Column))
Sub UpdateNumbers()
Dim rng1 As Range
Dim rng2 As Range
Dim rng3 As Range
Dim rng4 As Range
Dim celle1 As Range
Dim celle2 As Range
Dim celle3 As Range
Dim celle4 As Range
Dim celle5 As Range
Dim flag1 As Long
Dim flag2 As Long................
Function Find_Range(Find_Item As Variant, _
Search_Range As Range, _
Optional LookIn As Variant, _
Optional LookAt As Variant, _
Optional MatchCase As Boolean) As Range
Dim c As Range
If IsMissing(LookIn) Then LookIn = xlValues 'xlFormulas
If IsMissing(LookAt) Then LookAt = xlPart 'xlWhole
If IsMissing(MatchCase) Then MatchCase = False
With Search_Range
Set c = .Find( _
What:=Find_Item, _
LookIn:=LookIn, _
LookAt:=LookAt, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
MatchCase:=MatchCase, _ ........................
Using the message box I see that sheet 1 opens but then I receive an error message Run Time Error 91, Object Variable or With Block Variable not set. I tried declaring and using set on "project" but got nowhere. I also need to have a message indicating project not found. Once this part is solved I will loop all of my other workbooks
I am currently working on a simple macro to help with formatting a spreadsheet. The number of tabs on the spreadsheet will change to reflect the number of companies I'm running reports for. But the same process is to be applied to each tab. The issue I'm facing is I don't know the appropriate code to select all tabs without specifically referencing them.
The code that I would like to apply to all tabs is as follows:
ActiveSheet.PageSetup.PrintArea = "$A$1:$J$85"
With ActiveSheet.PageSetup
.LeftHeader = ""
.CenterHeader = ""
.RightHeader = ""
.LeftFooter = ""
.CenterFooter = ""
.RightFooter = ""
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6()
Cells.Select
selection.Copy
selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
For which I get 'Compile Error - Expected Function or Variable'
