Error On Linked Cells That Have OFFSET And VLOOKUP Formulas
Aug 7, 2012
Read about the Dfunctions and SUMIFS/COUNTIFS not working between linked objects and think my error is the same.
SYMPTOMS: Formulas wont work unless linked workbooks are open. Once open they work and as soon as the sheet is altered after they are closed, they links break.
My formula =OFFSET(('Linked Workbook'!$A$1),0,VLOOKUP(Range,RangeData,2,0)-1) or go to workbook and bring back a certain amount of cells to the right of A$1$ based on a lookup formula in the Main open workbook.
View 3 Replies
ADVERTISEMENT
Apr 26, 2006
s1. Offset(1, 2).Range("K4:K464").Formula = "=IF(ISNA(VLOOKUP(C2,Sheet2!$A$2:$B$1063,2,FALSE)),"""",(VLOOKUP(C2,Sheet2!$A$2:$B$1063,2,FALSE)))"
How do you get code like above to work in Offset? When i run it the cells remain blank but the code is above in the fx.
View 9 Replies
View Related
Nov 9, 2009
See the attached sheet. I am trying to add together two figs which are linked to calculations which have formula built in to stop error messages when there is a 0 / 0 = #value type error. However when these two cells are added, if the cells are blank I get an error message. And if only one cell has a value, I get "" with my existing formula. what I need to do to get a result of 7 if for example cell A4 = "" + B4 =7. At the moment my formula shows "" in the sum total of these cells
View 5 Replies
View Related
Feb 14, 2013
I want to establish a link from my worksheets. Using the conventional link method I was able to link the values from my first worksheet to the second worksheet. My problem is when I delete a particular row. The reference of the second worksheet will have an error #REF! since I deleted those cells. Is there any way that I can link my two worksheets without any error that even if I deleted a particular cell/row the reference is still intact?
View 2 Replies
View Related
Jul 16, 2014
I have a sheet that a VLOOKUP is looking at, and what I need is, if that VLOOKUP finds what it is looking for I need it to look at the cell 2 cells to the left, how is that done?
I am thinking something like:
Formula:
[Code] ......
I just don't know the offset part.
View 3 Replies
View Related
Apr 9, 2014
I'm working in one workbook with 2 sheets.
sheet 1 have simple values, for example
cell A1:5
Cell A3: 10
Cell A5:15
Cell A7:20
Cell A9:25
Cell A11:30
Cell A13:35
Cell A15:40
In sheet 2 i have the following formulas:
Sheet 2 Cell A1: =Sheet1!A1+Sheet1!A3
Sheet 2 Cell A2: =Sheet1!A5+Sheet1!A7
I need to respect this sequence when copying these 2 formulas in the same sheet 2 cell A3, however when I do that I get the following formula: =Sheet1!A3+Sheet1!A5. While i need it to sum up A9 and A11. i.e respect the order of the first 2 formulas.
View 3 Replies
View Related
Jun 18, 2007
I have a list of football fixtures that I want to pace in date order. The fixtures are however linked to a grid which has the following formula =IF(FIXTURES!C1="","",FIXTURES!C1 )
so that a zero doesn't appear until a result is actually added. Unfortunately when you sort the fixtures into date order the grid still looks at the original square, NOT the moved one appertaining to the fixture.
View 9 Replies
View Related
Jul 15, 2006
I've managed to set up a gradebook.
However, is there a way that I can get Vlookup not to return N/A when I have a blank cell on the report (not in the data table). I want to be able to calculate the progressive grade average of a stduent as the year progrsses.
View 9 Replies
View Related
May 13, 2013
On Sheet 2 I am looking for a formula to find Dog1 in a cell on a different sheet and then to equal a cell 2 columns to the right of where ever it found Dog1. I cannot make it so that it simply equals a certain cell all of the time. It has to be able to move in sheet 1. For example sometimes Dog1 will be on row 5 and sometimes it will be on row 7. So the equation I am looking for needs to be able to work no matter what row it is on. I have tried a couple VLOOKUP equations but they are not working because like I said, Dog1 is not the only text in that cell.
View 3 Replies
View Related
Jul 8, 2009
I want to extend a formula like so- =Sheet2!M3
=Sheet2!M60
=Sheet2!M117
Basically I want it to go up in increments of 57 when I copy the formula down. Is there an easier way to do this rather than typing it over and over again? I looked on an older post and saw some information about OFFSET and INDEX but couldn't figure out exactly how that worked.
View 4 Replies
View Related
Dec 8, 2013
I am trying to return the value (date) of a construction schedule by searching for a specific construction activity ID number. Is there a method I can use which incorporates a text search so that as the schedule grows (cell locations shift down) the lookup function still follows the unique activity ID?
Below is a sample of row of the ID I must search for, and the date I must return (on a separate excel file):
A
B
C
D
-
Activity ID
Description
Start Date
End Date
1
L3S4C10020
Supporting Walls to UPTS Slab 3
19-Jan-14
25-Jan-14
View 1 Replies
View Related
Oct 26, 2012
Any way I could SUM a YTD using VLOOKUP and OFFSET? In another worksheet, I need to reference Account Income #, go to the worksheet shown below, find the Account Income number, Offset and sum of the columns in that row to the YTD figure.
Attached is a sample : EXAMPLE.xlsx
Account
Income
9/30/2012
8/31/2012
7/31/2012
6/30/2012
5/31/2012
[Code] ......
EXAMPLE.xlsx
View 4 Replies
View Related
Feb 27, 2007
i have a table with customers and the rentals they have made. in the table it has their customer number and then the item code of the item they have rented out.
i want to have a table that brings up the item codes of what they have rented but with a vlookup it only brings back the first item they have rented and not the ones after that.
View 14 Replies
View Related
Jul 8, 2013
I have a data set that is laid out like this below:
Jan 12 Feb 12 Mar 12 Apr 12 May 12 Jun 12 Jul 12 Aug 12 Sep 12 Oct 12 Nov 12 Dec 12
Revenue $1000 $1000 $1000 $1000 $1000 $1000 $1000 $1000 $1000 $1000 $1000 $1000
On another sheet I want to find the Revenue and sum the Months Jan 12 to May 12.
So I would like to have my answer read $5000.
I am having a hard time doing the Vlookup and summing a range at the same time.
View 3 Replies
View Related
Apr 7, 2007
I need to add offset to this formula to return the value 1 row down. So it actually would return the values in I39
=VLOOKUP(A34,Correct!$A$2:$I$312,9,0)
View 9 Replies
View Related
Jan 7, 2014
I have a worksheet where I want to have one column of state abbreviations (entered by the user), and a second column of state-specific information that will be entered from a lookup table--named "StatePrefixes". Here is my code so far:
VB:
Public Sub cmdSelectState_Click()
Dim St As String
St = ActiveCell.Value
ActiveCell.Offset(0, 1).Value = Application.WorksheetFunction.VLookup(St, StatesPrefixes, 2, False)
End Sub
As is the code is generating a run-time error "Unable to get the Vlookup property of the WorksheetFunction class. If I remove the reference to the WorksheetFunction class I then receive a value of "#N/A" in my worksheet.
View 4 Replies
View Related
Jun 20, 2006
why the following code would error out in line 2 on one workbook but not another? I copied the one line, then the two and then the entire code from one workbook to another. It works in one, but not in the other. (Error 1004)
Dim FirstBlank As Range
Set FirstBlank = Range("A5").End(xlDown).Offset(1, 0)
View 9 Replies
View Related
Apr 24, 2014
How to use offset in combination with match and vlookup. Well I think I have to use Offset to find the value ( cell with time in it).
I have in my workbook 3 sheets: Sheet1, Sheet2 and Agents.
In 'Sheet2' every week I upload a report with persons and every person has a certain amount of time behind their name.
In 'Sheet1' I want to get (load) the data: the person and time from 'Sheet2'.
In 'Agents' I only match the names. That's because the names in the report I upload in 'Sheet2' have a different lay-out then the ones I use.
The matching and to get the names correct in 'Sheet1' Is no problem. Though I get stuck with the cells where the time is placed in the report I upload in 'Sheet2'.
The persons are in Column C ( C7, C26, C45, C64 etc) but the value I also need to get is not in line behind the names. It's In the 7th row under the name and in Column L.
Example:
Wiebe (C7) time ( L14)
Gary (C26 time ( L33)
Kay (C45) time ( L52)
What I use to match the names and get data is this formula.
=INDEX(Sheet2!$A:$L;MATCH(VLOOKUP(Sheet1!$A2;Agents!$A:$E;5;0);Sheet2!$C:$C;0);MATCH(B$1;Sheet2!$1:$1;0))
Is it possible to use Offset ( or something different) in this formula to also get the cells with the time ( matching with the right person)
View 14 Replies
View Related
Apr 16, 2009
On the attached spreadsheet, i am trying lookup the selection name in column A on the summary sheet and search through column A of the other three worksheets adding together the three answers but something isn't working as the end answer is incorrect. I have tried vlookup and also tried combining offset/match but neither way i am getting the correct answer. I removed a lot of the data to simplify things and changed the figures to fictional ones for privacy reasons.
View 2 Replies
View Related
Feb 2, 2009
I am using the following macro to format a sheet - I recently added a auto-fill part to it which essentially moves a number from one column to another and autofills it in all the cells until it encounters another number of the same kind in the column it moved the previous number from.
When I try to run this macro it does everything upto the auto-fill part and then gives me error 1004 [the set cell = cell.offset(1,0) ] is highlighted in yellow.
View 4 Replies
View Related
Sep 22, 2009
I have attached an example s/sheet. Basically this is an excerpt of the data that sits in a pivot table. What I want to do is from another sheet query this data. I don't want to use another pivot table as they are quite hungry in terms of memory and the data source we have is quite large. In essence what I want to achieve is in cell G2 the user enters a code. A function (vlookup?) will then scan column A to find that code.
The function then needs to look across and sum the total of Requests and Responses for all the dates. Whilst the dates may change, the number of dates will remain the same. Once it has summed them it needs to return the totals to cells G4 and G5. Additionally it needs to fill in the relevant total (offset?) for the corresponding week as detailed in columns H-AH. It seems quite a simple lookup issue but I am not very versed in nested lookups. I have looked around and it seems INDEX woudl do the job but I am at a loss on how to construct this type of function.
View 3 Replies
View Related
Jun 13, 2008
The message shows me "Can not get the vlookup property of worksheetfunction class" and don't know the reason. The 'plancomm' and 'bonus' is the range name in different worksheets of the same workbook as the rngcell.
Case Else:
.Offset(0, 1).Value = WorksheetFunction.VLookup(rngCell.Offset(0, -3), Range("plancomm"), 2, 0)
.Offset(0, 2).Value = WorksheetFunction.VLookup(rngCell.Offset(0, -4) & rngCell.Offset(0, 1), Range("bonus"), 6, 0)
View 3 Replies
View Related
Sep 25, 2009
I created a long macro as follows with 2 Select Case structures and the macro works fine.
View 14 Replies
View Related
Jul 30, 2012
I have 2 columns of data
column A = weeks (A2:A50) i.e. P1W1, P1W2, P1W3....P12W4 etc
column B = headcount (B2:B50) i.e. 5, 7, 5...10 etc
Essentially my criteria is "looking for last week and give me headcount" i.e. my lookup criteria is P7W5 ....however if P7W5 has no data, i want the lookup to go up or offset to the row above (it may be one to 4 rows above)....
View 3 Replies
View Related
Jul 29, 2014
Sample data
2014
2013
2012
Country A
2%
3%
Country B
5%
6%
7%
[code].....
Now, whenever I type in any country it should show me the most recent figure available for that country.
Suppose, if I type Country A in, say cell A14, then it should give me output 2% in cell, say A15. When I change that same cell to country C, it should give me output 10%, country B should give me output 5%.
Currently I have used IF and multiple/nested VLOOKUPs to arrive at this output. Is there any better way to do this with VLOOKUP and OFFSET?
I am using Excel 2007.
View 3 Replies
View Related
May 27, 2008
I'm trying to use an offset from a Named Range as my source cell in a vlookup but get a -1004 Object not defined error. When Debugged the Range.Formula appears to be blank when queried. Using Record a Macro the Reference to a named range worked fine but I could not test for an offset or the use of the range reference. What can I do to use to make this work
Range.Formula="=vlookup(Range(""SomeName"").Offset(1,0),DataRange,2,False)"
View 7 Replies
View Related
Jan 10, 2013
I am running Excel 2007 on Windows Vista Business 32 bit. Recently I have noticed that if I enter a formula into an empty, unsused cell, it is recognized as a formula. If I modify that formula, it is then recognized as text and does not work as a formula. The only way I can get the cell to recognize a formula is to delete the cell and start over. This same scenario does not occur on previously stored workbooks. I have checked all of the flags that I know about, including the Options function.
View 3 Replies
View Related
Dec 1, 2009
I am making a report template in excel. I have written a macro to format the report based on the contents of two other sheets in the work book.
I am attempting to combine two cells in separate sheets as a linked cell in a third sheet.
i.e. in sheet 3, A1 I want to combine the values held in sheets(1).range("a1") with sheets(2).("A1") as a link which will update as the parent cells values are changed.
The cell has to be a link of the other cells as their contents will change based on the report requirements.
View 5 Replies
View Related
Sep 24, 2009
I receive pdf files in which I have to copy multiple columns of data into a spreadsheet. The version of Adobe does not break the info out into seperate columns and the length of data in various columns varies from row to row. There are product names of various lengths followed by a planogram size and then some other data which is numerical seperated by commas, but is treated as text. Is there a formula which will look up a value in a cell and then report everything to the right of it?
PRINGLES SC & O 12 6,12,44,89
COMBOS PIZZA SNACKS 8 10,44,90,101
In the example above, the 12 and the 8 would be the POG size, which I have been able to extract, however, I would like to get all the info after that value into a seperate column. Can I combine vlookup and right to look up the POG size that has been moved into a seperate column to get that other info out?
View 3 Replies
View Related
Jul 16, 2014
I have combobox filled with range of two columns , i want somehow to show them both in linked cell , I don't figure it out , by myself using BoundColumn option and it showing first or second column only.
View 4 Replies
View Related
