Using MATCH Function On Column With Repetition

Jan 7, 2014

I have column A with 1000 cells tall with a bunch of random whole numbers from 1-100. In cell B1 I enter the formula:

=MATCH(25,A1:A1000,0)

This goes through the data and outputs the location of the first instance of "25". However my data has 8 instances of "25", and I want to know all of them. So basically in B2, B3, B4, ... I want to enter:

=MATCHsecond(25,A1:A1000,0)
=MATCHthird(25,A1:A1000,0)
=MATCHfourth(25,A1:A1000,0)
...

Obviously MATCHsecond isn't a real function, but that should explain what I'm looking for.

View 5 Replies


ADVERTISEMENT

Detect And Count Numbers Repetition And Date Repetition

Mar 27, 2014

I want in determined draw interval in lottery:

- detect the winning numbers repetition

- Count the winning numbers repetition and date repetition.

I unable send example caused by size.

View 8 Replies View Related

Using Index / Match Function For Two Column Match Values

Aug 28, 2012

Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.

2011
2011
2011
2012
2012
2012

[code].....

View 5 Replies View Related

IF Match Function: If A Name Is In A Column Of Names Put A 1 Otherwise Put 0

Jan 6, 2010

I am trying to write a formula that says if a name is in a column of names put a 1 otherwise put 0. Should be a simple If, match function. I have attached a simple example.....

View 5 Replies View Related

MATCH Function In A Column Of Cells

Mar 22, 2008

I have a formula that uses the MATCH function in a column of cells. My "lookup array" value for this MATCH function is A11:A411. I paste my data set into column A and if my data set is smaller than 200 (i.e. less than half the size of the lookup array size) then THE MATCH FUNCTION DOESN'T WORK. Weird.

1. Is there a way to make MATCH work all the time, no matter what the size of my data set?

2. One solution would be to have my "lookup array" be variable. Is there a way that I could change A11:A411 to A11:A"row of last value in data set"? OR to say it another way, is there syntax to describe a range with variables as the row numbers?

View 9 Replies View Related

Match Function To Return Column Number For Matching Date Errors?

Aug 5, 2014

I am trying to use some vba match function code to return the column number of the matching date. The date will be stored in a date variable.

Every time I run this code I normally get a match error even though the date is in the worksheet and the variable matches that date.

See below:

[Code] .....

View 5 Replies View Related

VLookup To Pivot Table Using Match Function - Returns Error If Can't Find Match Value

Mar 11, 2014

I am having some trouble getting a formula to work. I am building a report that pulls figures from a pivot table in another workbook. I am using a vlookup with match function to get the column index to find the relevant data I want. Where I need to add two columns together I am using sum, with the vlookup & match formulas nested in them e.g.:

=SUM(VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("FAID",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("BPCM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMD",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE))

Where:
F13 = Employee number
Column C on the pivot 156 workbook is where the employee number is based.
The Match formula is then getting the column index from the column headings of the pivot table ie. "FAID"

This in itself works fine, as long as it finds a match in the column headings. This is where i get the error as in the above function "COMD" is not in the pivot table. However I need to keep it included as it may appear on a future pivot table. Is there a way of getting the sum function to complete even though later in the formula it can't complete the vlookup? So it will ignore it, or assume the value is zero if it can't find it? The formula probably needs to do this for all the vlookups as some headings may drop off in future pivot tables.

View 2 Replies View Related

VLOOKUP / INDEX / MATCH Function: Match Data From 2 Independent Sets??

Oct 8, 2009

I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)

View 2 Replies View Related

Cell B1 To Display True If Any Of The Values In Column C Match Otherwise I Want To Display FalseOR Function Confusion

Dec 16, 2008

Example:....

i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.

A 1
B 0
C 0
D 0

But I can't determine how to get this done.

View 5 Replies View Related

Combination Without Repetition

Jan 16, 2010

how to create a list (I know how to calulate the count) of combinations without repetition when choosing 2,3,4 and 5 words from a set of 5 in Excel 2007.

e.g. Alpha,Bravo,Charlie,Delta,End

(AlphaBravo=BravoAlpha)

Choosing 2 = 10
Choosing 3 = 10
Choosing 4 = 5
Choosing 5 = 1

View 11 Replies View Related

Distribute Data Without Repetition

Feb 17, 2014

I organize monthly audits of work completed by the team. Essentially we all audit each others work; but we cannot audit our own work.

I would like a formula that will evenly distribute the jobs for audit without passing a job back to someone that owns the job originally. e.g. Gareth cannot audit a job Gareth owns, but can audit Zach or Claire's jobs. The Excel sheet attached should make it easy to understand.

So far I have tried: =INDEX(A2:A24,RANDBETWEEN(2,24)) but this duplicates data and I cannot get it to evenly spread the jobs amongst the team.

View 3 Replies View Related

Random Numbers With No Repetition

Jul 25, 2008

I want to generate 12 random numbers between 1 and 75 w/ no repetition.

I was using the aleatórioentre which translate ro "randombetween" function.

But, obviusly, I cant figure out how to make them unique, with no repetition.

View 9 Replies View Related

Inserting An INDEX,MATCH Function Into A HYPERLINK Function Instead Of Cell Reference

Mar 20, 2009

Another interesting dilemma to solve. Using this formula:

View 2 Replies View Related

Nesting Index / Match Function Within Vlookup Function?

Dec 3, 2013

let me start by saying that I know an example workbook would be useful here, but the part I'm struggling with is the [managementroster.xlsm] file, and there is A. no way I can release it to the internets and B. its so huge/complicated I couldn't even begin to reproduce a portion of it, scrubbed of data, and hope to maintain its functionality in a meaningful manner.

[Code]....

This formula checks a staff number on this spreadsheet, and then goes and looks at the staff number on the roster. Once found, it returns that staff members roster, but changes any manager codes in the MRC list to Mgr, and changes all other roster codes to Free.

I now need this formula, before altering roster codes to Mgr or Free, to only return codes that are a match for another table (or after really. I don't particularly care, so long as only codes are shown that match data from another table). I think an index/match function would do the trick, but this forumula is already at the edge of my excel ability, nesting another function within it is completey beyond me. The relevant cells for the index/match function would be:

This first Match function targets the column. $E3 is the date required, $BA$1:$DN$1 is the range the dates are entered in
Match: Lookup value = $E3
Lookup array = '[ManagementRoster.xlsm]Vacancies!'$BA$1:$DN$1
match type = 0

This second Match function targets the row. $A$4 is the department name, $B$434:$B$452 is the range where all departments are entered

Match: Lookup value = $A$4
Lookup Array = '[ManagementRoster.xlsm]Vacancies!'$B$434:$B$452
match type = 0

Index: array = $BA$434:$DN$452

So I think my final function is

[Code] .....

But I have absolutely NO idea where it would fit within my first formula, or how to code it so that my original formula only reproduces results that are found in both sheets, or anything.

View 2 Replies View Related

Output All Combinations Of List Of Given Numbers With Repetition?

May 10, 2014

I need to be able to create a list of all combinations (where position doesn't matter, therefore its not a permutation) of a list of numbers with repetition enabled. I need to provide anywhere up to at least 10-15 numbers if possible and they are integers normally between 1 and 72. Example: (for numbers 1, 2, 3)

VB:
1
2
3

[Code]....

View 5 Replies View Related

Arrange Numbers 1 To 11 Row Wise Randomly With No Repetition

Mar 29, 2014

Arranging row wise an array of numbers from 1to 11 randomly with no repetition. I need it for 700 rows.

Sub test()
Dim a1(1 To 11, 1 To 2) As Double, a2(1 To 11, 1 To 2) As Double, a3(1 To 11, 1 To 2) As Double
Dim a4(1 To 11, 1 To 2) As Double, a5(1 To 11, 1 To 2) As Double, a6(1 To 11, 1 To 2) As Double
Dim a7(1 To 11, 1 To 2) As Double, a8(1 To 11, 1 To 2) As Double, a9(1 To 11, 1 To 2) As Double
Dim a10(1 To 11, 1 To 2) As Double, a11(1 To 11, 1 To 2) As Double, i As Integer
Randomize

[Code] .....

View 2 Replies View Related

To Compare Details In 2 Workbook And Highlight If There Is Repetition

Mar 8, 2007

If i have a string of information in 2 workbook and I need to check if the details in column a in workbook 1 has a duplicate entry in column b in workbook 2 and if there is a duplication, then highlight it in both workbook. How can I go about it to create the codes so that I will be able to use it for different workbooks without changing the codes every now & then?

Scenario: -
Monthly invoice verifications for a few vendors.
To verify info from the manual invoice againts the auto invoice (2 different workbook for each vendor)
Need to verify info from Column A in Manual invoice against column B in Auto invoice. If there is a same data in both column, then data to be highlighted.

View 2 Replies View Related

Vba Code To Restrict Horizontal Categories Items Repetition

Jan 31, 2014

I have chart as shown in attached file. It plots 12 months data.

I want to restrict it to plot only such number of months as is mentioned in Cell H1.

View 4 Replies View Related

Contains Function: Function That States If A Cell In The Email Column Contains A String Or Value From The Names Column

Oct 13, 2009

On sheet 1 I have a list of 1000 firstnames
On sheet 2 I have a list of 1000 emails,

I need a function that states If a cell in the email column contains a string or value from the names column, it will result in a true statement so that I can separate out the emails that have these peoples first names.

View 5 Replies View Related

Match 1st And 2nd Columns In 2 Sheets And Return 3rd / 4th And 5th Column If Match

Dec 15, 2013

[URL]

What im trying to do is match columns A & B from AUDIT Sheet to Columns A & B in MASTER sheet. If they match then pull columns C, D & E from MASTER into AUDIT.

View 9 Replies View Related

Lookup/Match: Compare A1 For The Values In Column B, Then Return The Corresponding Cell (column C) In Column D

Jan 31, 2008

I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.

I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.

View 9 Replies View Related

Index/Match: Match Column "G" To Column "L" And Count Column "H" Based On The Table To The Right

Apr 3, 2009

I am having a little trouble with tying an index/match formula that would probably require an "if" portion to the formula as well.

If you take a look at the attachment, I'm trying to match column "G" to column "L" and then use the appropriate price according to the specified piece count in column "H" based on the table to the right.

View 2 Replies View Related

Compare Column B With All Rows In Column A If Match Place In Column C?

Aug 13, 2014

I want to compare two columns. I would like to see if the contents of column B appear anywhere in column A, for any amount of rows, and if it does, to place the match in col C.

So in the example below, red in B1 would be checked in A1 through A1000 or however long A is. When any row has red, place that match in that row for C.

This would be repeated until all rows in B are complete.

Example
Col A: red
Col B: red
Col C: red

Col A: red
Col B: blue
Col C: not found

View 6 Replies View Related

Match Function To Look At Max Value That Is Less Than Certain Value?

Dec 26, 2013

I'm trying to use match function to find the max value that is less than a given value. look at my file. I think it should return F as the value, why is it returning G?

View 11 Replies View Related

Match Function..?

Dec 17, 2009

=MATCH(9.999999E+307,B12:Y12)-1

=MATCH(9.999999E+307,B18:Y18)-1

So what is this pulling and how does it change depending on the data?

View 2 Replies View Related

Match Function

Nov 23, 2009

I'm using the match function to tell me in which column the first positive/non-zero number appears. However, the formula is returning the # of columns in the range. Here is what I'm using:

=MATCH(1,H6:CA6,TRUE)

I'm getting 72 back as a result, which is the number of columns between column H and CA.

Any ideas why this is the case?

View 10 Replies View Related

UDF Match Function

Feb 10, 2010

I have the below code sent in by a MR Excel forum user

Public Function BigMatch(rngIndexColumn As Range, varMatchValue As Variant, rngMatchRange As Range) As Variant
Dim lngCol As Long
Dim rngCell As Range
lngCol = rngIndexColumn.Column

For Each rngCell In rngMatchRange

If rngCell.Value = varMatchValue Then

BigMatch = Cells(rngCell.Row, lngCol).Value

End If

Next rngCell

End Function

when using the BigMatch Function = BigMatch(any cell in the column you want to pull from, the value you want to match, where you want to find that value)

I am using 2 different sheets, Technology & Lessons learnt: when I try the BigMatch Function

=BigMatch(Technology!C17,'Lessons Learnt'!A46,Technology!W17:AD27)

Instead of returning 'Technology'!C17 its returning the value from Lessons Learnt C17,

View 9 Replies View Related

Using Match And If Statement In Function

Feb 13, 2014

I have a very long function I created. But I need to edit it in a matter I have never done before.

Below is my function and i will like to add a new condition to it.

IF the text value in cell C7 is equal to any text value in Workbook2 B10:K10 and the value underneath that cell (I.e if B10 then B11 etc..) is Deleted then I want to have one of the conditions of my function below display "Deleted".

=+IF(AND(E7<=0,J7<>0,Y7<=0,AO7<=30),"Check Inventory",IF(AND(E7<=0,J7<>0,Y7<=0,AO7>=60),"Delete Listing ",""))

View 2 Replies View Related

Address And Match Function Together

Feb 23, 2014

Using the address function to find the exact cell of a unique string text.

I'm using the following command to find the address of a string i have in a different cell.

=ADDRESS(MATCH("*$H$1*",A:A,0),1)

The string text is in cell H1, H2, H3.......(or on another sheet). The goal is to find the address of a cell containing the unique string text from cell H1, H2, H3.....(that entire column) in a sheet with 13,000 lines. Basically, searching for a specific cell address of a string text referenced from another cell.

View 2 Replies View Related

Replace #N/A In Match Function

Aug 1, 2007

=IF(ISNA(INDEX($D$3:$D$100,MATCH(G19,IF($C$3:$C$100="DF",$A$3:$A$100),0)),"",(INDEX($D$3:$D$100,MATC H(G19,IF($C$3:$C$100="DF",$A$3:$A$100),0)))

what i'm trying to do is to replace #N/A with blank. Taken the above from vlookup examples but does not seems to work.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved