I am having a little trouble with tying an index/match formula that would probably require an "if" portion to the formula as well.
If you take a look at the attachment, I'm trying to match column "G" to column "L" and then use the appropriate price according to the specified piece count in column "H" based on the table to the right.
So I am putting togther a process matrix template for a Value stream analysis. I would use brute for and simple tricks to make this work but I am handing it off in two weeks to a student and I want this to be as strait forward and as easy to use as possible.
________C_______D_______E________F______G___
_____Part#1___Part#2___Part#3___Part#4___Part#5
Drill 1___1_______2________0_______3_______0__
Drill 2___0_______3________0_______1_______1__
Drill 3___0_______0________0_______4_______2__
Lathe 1__0_______1________1_______0_______0__
Lathe 2__1_______4________4_______0_______1__
Lathe 3__0_______0________5_______1_______0__
The first worksheet has a list of about 180 machines running vertically, and enough space for 20-50 part numbers to plugged in running horizontally across the top. The next three worksheets have the machines organized and grouped together by processes. I planned to use an Index-Match such as =INDEX('Individual Machines'!D$6:D$194,MATCH("Drill 1",'Individual Machines'!$C$6:$C$194,0))
The goal would be to get the user manually fill in the first worksheet, and then allow the user to use the vertical autofill function to fill in data on the later worksheets. This would provide a flexible template that can be re-used for different and various product families.
So populate something like this with a downward autofill for the number of times the part# hits a machine.
_______Drill 1___Lathe 2___Lathe 3___
Part#1___1________1________0____
Part#2___2________4________0____
Part#3___0________4________5____
Part#4___3________0________1____
Part#5___0________0________1____
I am trying to use a nested INDEX and MATCH array formula to return the value in column C when matching column A and column B, but with a few more criteria.
The range containing all the data
A
B
C
1
Cat 1
January 1, 2014
John
[Code] ..........
I am looking for the array formula to return the name of the person in column C who is in Cat 1 after the date in column B.
For example;
C7 should return "John" because B7 requests "January 15, 2014", which is after the value in B1
C8 should return "John" because B8 requests "February 15, 2014", which is after the value in B1
C9 should return "Andrew" because B9 requests "August 15, 2014", which is after the value in B4
The best try I had for the formula in C7 was
{(INDEX($A$1:$C$4,MATCH(1,($B$1:$B$4>=B7)*(A$1:$A$4=A7),0),3))}
This brings back "John" as desired in C7, but when copying down the table into C8 and C9 both C8 and C9 return Andrew.
I guess this is due to my ">=" condition in the Match formula and it is returning "Andrew" because "Andrew" is also after the date requested, but I cannot for the life of me work out how to get it to work.
Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.
2011
2011
2011
2012
2012
2012
[code].....
I am trying to get excel to search a workbook/(or worksheet if easier) for a matching unique value and fill in its associated data. My first workbook has the SKU (A) filled in but not the UPC (B). My second workbook has both the SKU (A) and the matching UPC (C) filled in.
I need to take both workbooks/(worksheets), compare the SKUs, and if a matching SKU is found, extract the UPC from Workbook 2 and fill in the UPC field in Workbook 1, and if no UPC is present in Workbook 2, then it leaves the cell in Workbook 1 blank.
The following code works to update the target sheet based on matching column names within the source sheet.
However, I would like to bolster this by not only updating based on matching field names, but also the primary key in column A. Meaning the data from the source sheet isn't always in the same order (based on primary keys) as the data in the target sheet. So I want to keep the order of the primary key in the first column and then update matching field names in column B through the last column where the primary keys match between the source and target worksheets.
Sub CopyDataBlocks()
'VARIABLE NAME 'DEFINITION
Dim SourceSheet As Worksheet 'The data to be copied is here
[Code]....
I'm working on a project in which I have 50 states + DC listed by 2-letter abbreviation, and want to return a value in another column that will be a non-unique number (some will duplicate in the second column.)
Also need to do this same operation with first column (state) and third column, which also is comprised of non-unique numbers.
Hlookup, lookup & pivot tables seem to not be a fit for this.
If I have a column of data with a bunch of values (which can't be sorted & which is constantly changing so cant be broken into another column and then sorted) what formula do I need to output the second occurrence of a value in that column?
View 3 Replies View RelatedI have used this technique before with a sumif formula, to use the column that matches a reference cell but I cannot get this to work on a sumifs formula. What I have used previously in a sumif formula (only 1 criteria) is below.
View 3 Replies View RelatedHow to get the following index/match formula to work.
I have 2 criteria that I need to find the result of in a table that has the one criteria down the column, the other across a row at the top.
The formula I have is thus far:
{=INDEX($K$46:$AV$46,MATCH(L98,IF($K$15:$AV$15=N98,$K$27:$K$82),0))}
In this L98 is the criteria I'm in theory doing a vlookup against the values in column $K$27:$K$82, and N98 is the theoretical hlookup against row $K$15:$AV$15, bringing back the intersection point from row $K$46:$AV$46
All I get is #N/A .....
Basically, I want a code that does a simple index-match function for a column - But for all the #N/A's that come up in that column, I'd like it go to another INDEX-MATCH function - and another after that. I'm trying to keep it all in one column.
Here is an example of the first index match
=INDEX([FILENAME.XLSX]DealerDetails!$A$2:$A$15000,MATCH(L2,[FILENAME.XLSX]DealerDetails!$CJ$2:$CJ$15000,0))
If this turns out an #N/A, I'd like those #N/A's to switch to this formula:
=INDEX([FILENAME.XLSX]DealerDetails!$A$2:$A$15000,MATCH(M2,[FILENAME.XLSX]DealerDetails!$CK$2:$CK$15000,0))
Then the remaining #N/A's to go to this one:
=INDEX([FILENAME.XLSX]DealerDetails!$A$2:$A$15000,MATCH(G2,[FILENAME.XLSX]DealerDetails!$G$2:$G$15000,0))
The column I'm referring to will have around 2,000 records or less.
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I have two data points a Talk Time Value lets say 2:08 and the number of calls lets say 10 and need to pull the column heading value for the number of agents needed lets say 2. My "Grid" is saved in one sheet and the my variable data values are in another. I need to somehow pull the closet match of my talk time value 2:08 and the calls value 10 to match up on my grid and give me the Column Heading which is the number of agents. Which in this example would be 2 agents. Just for reference in my other sheet I have my Talk time Value in C3 and my Call number value in D3. I tried various Index and Match formulas but have not got the one that I need to work the closet I have is =INDEX(Sheet2'B1:D1,MATCH(D3,INDEX(Sheet2'B2:D7,MATCH(C3,'Sheet2'A2:A7,1),0))).
example: in Sheet 2
ColA Col B Col C Col D Sheet 1 C3= 2:08 D3=10
Row 1 1 2 3
Row 2 1:00 0 3 4
Row 3 1:15 1 5 6
Row 4 1:30 2 7 8
Row 5 1:45 3 9 10
Row 6 2:00 4 10 11
Row 7 2:15 5 12 13
I'm using Index/Match to find a value in another workbook, but there is one value that I want to ignore. For example here is my function --
=INDEX(ZZANALYSIS_PATTERN.xls!$A:$H,MATCH(D8,ZZANALYSIS_PATTERN.xls!$G:$G,0),2)
In D8, the value is Blue. Here is an example with made-up values (X is meaningless values) --
A B C D E F G
X Apple X X X X Blue
X Pie X X X X Blue
When I use the function, I want it to retrieve Pie, but it always retrieves Apple. Is there a way to ignore Apple? I've tried throwing "Apple" in there a couple different ways, but nothing is working. Or, if I can search from the bottom up, that would work as well.
Whatever formula I try is returning an error of #N/A
I have two worksheets the first with transport data - customer,collection point, delivery point, haulier and number of pallets - all this information is in columns; the second sheet with the rates show haulier, customer, validity, delivery point in columns and then pallet numbers run across a row with rates tying in underneath. i have simplified this below.
I am just trying to reference all the data and work out what the cost for the variables would be in the example the cell i'm trying to find is H8 (320) -
I have already tried the following and several modified versions:
=INDEX('RATE LOOKUPS'!$E$6:$I$9,MATCH(1,('MASTER DATA'!A:A='RATE LOOKUPS'!C:C)*('MASTER DATA'!B:B='RATE LOOKUPS'!B:B)*('MASTER DATA'!C:C='RATE LOOKUPS'!D:D)*('MASTER DATA'!D:D='RATE LOOKUPS'!A:A)*('MASTER DATA'!E:E='RATE LOOKUPS'!E5:I5),0))
[Code] ..........
Let's say I have a list in worksheet 1. It's in column A, starts in row 1 and goes.
Red
Orange
Yellow
Green
Blue
Purple
In worksheet 2 I want to list in row 1, starting with column A, which colors have a value next to them. I want the list to match the first worksheet's order. I'm looking for a formula solution.
Example 1
WS 1
Red 3
Orange 4
Yellow 5
Green
Blue 1
Purple..........
I'm trying to perform an index / match lookup that can have a dynamic indexed column.
Sheet1 has the master table and sheet2 is where I'm putting the formula. The table on sheet1 has a RecordID field that uniquely identifies each record and that must be typed into Sheet2 [RecordID] column and then matched to sheet one to identify the record
Code:
MATCH([RecordID],Table1[RecordID],0)
The column headers on Sheet1 are used as data validation for the column [Field] on sheet2. The value of the Field column on sheet two should determine the the column on sheet1 to index.
This is what I have so far:
Code:
=INDEX(MATCH([Field],Sheet1!A:AQ),MATCH([RecordID],Table1[RecordID],0))
I would imagine that the title of this thread made little sense, so let me try to explain:
Sheet A has columns A-C populated with data. Column D needs to search Sheet B columns A-C for a match. (ie, see if the data on sheet A is also on sheet B) if this is true, then it needs to return the value of the LAST column of the matched row in Sheet B.
So, if Sheet A R1 A-C is 1,2,3. Sheet A R1 D needs to search Sheet B for 1,2,3. and when it finds it, (for example on row 9) return the value of the last column of Sheet B row 9. The issue is, the last value could be in column R or S or AA, there is just no way of knowing.
I have one worksheet. I am needing to match up column G cells (TELCEL/MULTI) with value on E3 and with value E4 and give consecutive numbers on column F depending if the matched column G with value on E3/E4 is on same date of column L and if column Q (Tipo de movimiento) appers "Ventas"; I have plenty blankcells and other values on column G.
column E
# DE EVENTO
COMPANIA
INICIO
MES
Clave del producto
Descripcion
Fecha del movimiento
Clave de la tienda
Clave de la caja
Clave del usuario
Clave del vendedor
Tipo de movimiento
row3
TELCEL
[Code] ........
I have to put 1 to first and then sum one if condition is true
1
TELCEL
TAT
may
TAT31
Telcel, Telcel tiempo aire $31
01/05/2014
01
01
3
Ventas
I want to compare two columns. I would like to see if the contents of column B appear anywhere in column A, for any amount of rows, and if it does, to place the match in col C.
So in the example below, red in B1 would be checked in A1 through A1000 or however long A is. When any row has red, place that match in that row for C.
This would be repeated until all rows in B are complete.
Example
Col A: red
Col B: red
Col C: red
Col A: red
Col B: blue
Col C: not found
I have two spreadsheets, one with master file with original data and one that needs to pull in the original data. My issue is all the data to match off of is in the same column, and a number of other files link to the master file, plus it is used externally, so I cannot alter it, and I would rather not create a mock/copy file. Is there a formula that can look for 2 different items within the same column? Would prefer not to use VBA, but if that's the only option I'll take it. I am using Excel 2003.
Here is an example of the setup - I would need the formula to reference off the two different items/categories in the column, so lookup off the 'St. Louis' and following that, lookup off the produce items.
Excel 2010: I'm working with a sheet where I would like to get accurate results on the make and model of cars sold in a given week. The workbook contains several worksheets each representing weekly sales numbers for different vehicles.
The Make-Models tab has the lists used to create the drop-down selections.
The Sales tab allows one to create an ad hoc report on the total number of vehicles sold, by Make and Model. Cell B2 is named 'SelectedModel' and used in the formula found in column E, Total Sold.
Problem: When I select Honda, for example in B2 of the Sales worksheet then select Accord in cell B3 of the same. The results returned in E2, E3 and E4 are 2, 3 and 4, respectively, instead of 8, 3 and 7.
2 Honda Accords were sold on Monday and 6 on Tuesday of the same week. My formula is only returning the first matched value of 2 whereas I would like it to return 2+6, 8 for week 1. Same goes for other weeks.
Select any other make and model and notice the problem follows. I believe the error is due to incorrect usage of the formula or incorrect formula altogether.
IF(ISNA(INDEX(Week1!E:E,MATCH(SelectedModel,Week1!B:B,0))),0,
INDEX(Week1!E:E,MATCH(SelectedModel,Week1!B:B,0)))
I currently have a table with a range of headings (row & column), and the necessary data for it. On a new worksheet, I have a table with only a few of the headings, and I was wondering if there was a macro that would automaticlly match the headings of the new sheet with the other table, and fill in the ncessary dat, as on the other sheet.
View 3 Replies View RelatedI needed to match the width a merged area of seven columns to a single column width (for row autofitting). Adding the column unit values and setting the single column to that value produced a significantly narrower width.
The documentation mentions that the column width unit is scaled to the font type and size and the absolute width is given in points.
This is set by the normal style setting in Excel Options or by VBA application.standardfontsize = 8 (in this case).
For instance, ten columns of Arial font 8 at 8.5 units you would think to be equivalent to a single column of 85 units.
In points, the difference is 420 vs. 386.25, or 33.75 points.
Well, the standard character zero has a width at this setting of 4.5 points and 1 unit is 8.25 points, leaving 3.75 points for margins.
Then (10-1) margins allowances time 3.75 points resolves the difference.
Determining the margin allowances is straightforward, and reveals that the gradation with size is stepped by MS design.
For instance, sizes up to 11 use 3.75 points for margins and increasing points for characters (except between 9 & 10).
Sizes 12 through 18 use 5.25 points, 20 & 22 use 6.75, 24 & 26 use 8.25, etc.
I have created a table for this purpose, however I rarely use a "normal" other than 8, so I can probably use that set in programming.
I need to look up the name in E2 in the list in column A and if it matches then lookup name in F2 in list column b, if it matches then the corresponding number in column C is displayed in column G. If neither names are in the 2 columns the words"Not on lists" is displayed in cell in column G.
The other problem is one name is spelled two different ways I want it to look for both spelling before moving on to looking up the second name.
I started with this formula but I'm getting #N/A or "not on list" when they are on the list. I'm using ranges prod_sum is columns AthruC, Last_name is range BthruC. =IF(AND(VLOOKUP(F4,prod_sum,3,0),VLOOKUP(I4,last_name,2,0)),"not on list")
Here's what I have.. (on a much smaller scale)
http://www.jmetenterprises.com/produ...pics/excel.jpg
(notice how the lines that match are now even.)
[Edited by admin~ *Link* to large images, don't display them]
I need a formula to run down a column DCapture.JPG (starting at 142), when it finds the last entered value it needs to display the corresponding value from column J into cell AA21.
If you see the attached photo, the last entered data in column D would be 1, AA21 would be saying -30 (J205)
Capture.JPG
I have a tab that has 2 columns of data and I want to be able to return a value in column A if my data matches column B. If column B has the text TRUETRUE, I want to bring back the corresponding data in Column A. How do I return all the data in Column A for all the TRUETRUEs in column B? I can only get the first instance of TRUETRUE.
View 4 Replies View Related[URL]
What im trying to do is match columns A & B from AUDIT Sheet to Columns A & B in MASTER sheet. If they match then pull columns C, D & E from MASTER into AUDIT.
I need to find the data in the sheet SKU & match it to the data in import_215 column F if it matches then delete the entire row (see Attachment SKU3)
View 12 Replies View Related