Using Text Files Vs Workbooks
Sep 3, 2006
What is the need for storing information in a text file instead of just keeping the data in excel on a worksheet or in vba code.
for example.
I have a file that was given to me that on the OpenWorkbook event runs through an "INI read " procedure. All this does in get certain data from a text file such as:
file paths, rates, file names
Is there any need for this as you could easily store the same information on a worksheet and declare variables in the code.
View 9 Replies
ADVERTISEMENT
Feb 15, 2010
For the past several days I have been attempting to write a macro, which in theory would check the values within a one- sheet workbook (we’ll call it run_list.xls) against the values in two different workbooks (we’ll call these production.xls, development.xls). However after several days I am nowhere closer to solving this problem then I was when I started. I’ve tried different scripts and variations of vlookup, but I have been unsuccessful in tailoring what I have found to meet my needs. So I feel it is time to lie down and scream for a medic.
Here’s some background on the workbooks. The sheets in all three workbooks are set up in the same manner. Cell “A1” contains time/ date, cell “A2” contains a lot#, cells “A3:A99” contain positioning data, and cells “B3:B99” contain serial numbers associated with tubes in the specific positions. The only differences between the workbooks are the sheets in production.xls and development.xls are labeled according to their specific lot number.
What I have been trying to do is to take a value from cell "B3"in run_list.xls and find where that value occurs in column B either of workbooks. When that value was found I wanted to copy cell "A2" from its sheet and paste that value in cell "D3" of run_list.xls. I had also wanted to repeat that those steps for every cell in column B containing a serial #. If a serial number was not found I wanted it to report “Not Found”. There are also times when instead of a serial number a phrase “No Trakmate” is listed. In these cases I had intended to skip these lines.
Also, since production.xls, development.xls are updated frequently their names are also updated with new version numbers ie. Production_v10.xls I had intended to allow the user to choose what files to search in but was unable to figure out how to add a second location.
View 9 Replies
View Related
Oct 16, 2006
Here is what I'm doing:
-Open .xls file
-Run a macro (it works correctly when run by itself but I'm trying to speed things up)
-Save
-Close
-Open next file, and so on (I'll do this on no more than 200 files at a time all in the same folder)
Here is the code I am using: ....
View 9 Replies
View Related
Jun 20, 2007
in simple terms im trying to cross reference a name list with registers from another wrokbook. so basically the desired result is. i press my button and it loads the second workbook up, it then uses the a name list in the new book and searches for that names maches in the registers (a group of sheets) on the previous workbook then if a match is found it colours the background in green. I am however getting errors e.g. "run time error: '424': Object required"
with this line then highlighted in yellow:
u = ShtNm.Sheets("Sheet1").Cells(1, "C").Value
Sub Macro1()
Dim u As Integer
Workbooks.Open FileName:= _
"S:HR TrainingO2 Operational TrainingRetentions and CollectionsUpgrades
ames 18th june onwards.xls"
ShtNm = ActiveWorkbook.Name...............
View 3 Replies
View Related
Dec 21, 2007
I have a excel file that I enter information into. I have code that saves the files to a certain folder with the name, date, and time stamp for the file name. At the end of the day I might have 3 to 15 excel files I have created that day and I would like to take information from certain cells (examle: L3, B6, B7, B8, G8, and so on) and create a txt file with all of the information in it.
Example:
12/20/2007
Your Name
123 Somewhere St.
Here, OH 45111
Home Visit
12/20/2007
Someone Else
345 Anywhere St.
There, OH 45211
Hospital Visit
View 9 Replies
View Related
Jun 12, 2013
I have a master workbook (that I will call 'A') with a number of links to other workbooks ('B' to 'Z'). 'A' is designed to collate and display the data held in workbooks 'B' to 'Z'. The links all work fine until the 'B' to 'Z' workbooks are updated with new data, at which point, the links break with a "Error: source not found" error.
This is caused by the process by which we update the 'B' to 'Z' workbooks. We have to delete them, and replace them with new files, that have the same name.
Is there any VBA code or something that I could run that will update the links to pick up the new files?
View 2 Replies
View Related
May 3, 2012
I'm trying to determine how many different excel files are open, but my VB program runs outside of excel (in a program called Pulse).
Here's the code so far:
set ExcelApp=CreateObject("Excel.Application")
ExcelApp.Visible=True
For Each Workbook in ExcelApp.Workbooks
MsgBox(Workbook.Name)
Next
Msgbox(ExcelApp.Workbooks.Count)
The only message box I get is the last line of code, and it says "0" even though I have multiple excel workbooks open.
View 3 Replies
View Related
Oct 4, 2006
Is there a way of finding all files in a directory which contain a macro? I have script which will loop through all files in a folder but I don't know, and can't find, the appropriate syntax for referencing macros/modules.
View 9 Replies
View Related
Sep 15, 2007
Simply trying to copy data from one worksheet to another. The source sheet is an excel file exported from an Access table. I recorded the macro using the recorder in Excel because I am no programmer, but when I try to run the code, I get this error:
"Code execution has been interrupted" ...and the Range I tried to select in the source file is highlighted by the Editor.
Is the source file protected somehow?
My ______________________________________________________________________________
Private Sub Workbook_Open()
ChDir "P:Databasesdownloads"
Workbooks.Open Filename:="P:Databasesdownloadsheadersflat.xls", Origin:= _
xlWindows
Range(Selection, ActiveCell.SpecialCells(xlLastCell)).Select
Selection.Copy
Windows("ExcelTool.xls").Activate
Range("A1").Select
ActiveSheet.Paste
View 9 Replies
View Related
Jun 6, 2008
I have a folder named DATAENTRY (consist 90-100 password protected files & it may increase whenever the need arises).
I need to merge A2 to (data in last available row & last available column) of each file in that folder into a single sheet named MERGEDDATA of file named MASTER.XLS.
I got one excellent code to unlock/lock the files automatically without opening the concerned files. This is the Link [url]
& the Code is: ...
View 5 Replies
View Related
Sep 26, 2007
I have about 100 Excel files in one folder that need to be saved as text files. They can keep the same name, but simply need to be converted to text files. I'd like to use VBA for this and I can't find examples that do exactly that...or ones that my limited knowledge can handle.
Excel files exist in C:Source and ALL of them should be saved as text files in C:Destination. Maybe there is an easier way, but I thought for sure there was a routine I could use.
View 4 Replies
View Related
Sep 12, 2010
I and my organization have many files created using Excel 2003. I have now upgraded to Excel 2007 and soon I discovered a huge problem.
- When opening a file using Excel 2007 that was created with Excel 2003 the links in that file is automatically updated even though I get the edit links dialog and choose not to update.
After searching for a solution on the Internet I realize that this is a problem that exist when Excel opens a file created in an earlier version. Microsoft has no solution.
I need to be in control of which links that are updated and not.
Going back to excel 2003 is not an option. Saving the source files in Excel 2007 is not an option.
View 5 Replies
View Related
Sep 6, 2006
I do a search on my directory for all *.xls files each month which produces a list some 11,000+ lines long. Attached is a very small sample.
I then import this into Excel – see tab Raw Data
What I want to produce is a list shown on tab Finished Data, so that I can then sort etc.
Has someone already done this before and got the code, or can someone point me in the right direction on how to arrive at the finished data?
View 9 Replies
View Related
Jul 6, 2014
I have excel data file where the code can split the data into different xls file on the basis of country for first sheet only.
execute the code so as to create single country wise files for all sheets. i.e. file consisting of data with sheet A1,B1,C1. The present code works only for sheet A1 and it creates different files with data related to that country. I was looking for the output file with B1 and C1 as well for that country. Also new output file needs to be renamed just as of original one.
View 3 Replies
View Related
Jun 13, 2013
I am trying to make my macro more dynamic for a spreadsheet I am working on. I have this code which splits out worksheets (using the specific names of the worksheets-not dynamic) from a main workbook into template workbooks (which are basically just an empty workbook because I didn't know how else to do it) and then saves them using the paths below. I would like to make this more dynamic by splitting the different worksheets into new workbooks based on a key column in the hierarchy worksheet.
Basically I have a list of accounts in column B with the file name they should be exported to in column A. There are about 30 accounts being split into 6 different region files. Also note that the same account might be listed multiple times in column A (needed to add multiple numbers for other lookup formulas in the worksheets) but that account worksheet will still only be going to one of the six region files and not to multiple regions. After these are copied to an individual file I would like to save it to a location on my computer. All files will go to this location.
VB:
Sub Create_Subfiles()
Dim FDMName As String
Dim FBName As String
Dim DIYName As String
Dim WMName As String
[Code] .....
View 3 Replies
View Related
Sep 17, 2007
I m trying to write a macro which could take the text from a single column row T2 to row T313 and write it to a .txt file. Have the .txt file name created by the text in T4 or I could also put the text to name the file in T1 if you think it would be easier.
Then carry on to the next named sheet and produce another .txt file in exactly the same way until all 15 sheets have been completed. It would also be helpful if prior to starting to write each text files, it could test for any text in cell A2 of the sheet. The first empty A2 cell of a sheet would determine the end of the run, if it was prior to sheet 15 being reached.
View 2 Replies
View Related
Mar 15, 2005
I'm trying to take a large text file and break into smaller text size files. I want to open the data file, and parse into 5000 line smaller files.
Here is what I have based off of some MS KB
Sub LargeFileImport()
'Dimension Variables
Dim ResultStr As String
Dim FileName As String
Dim FileNum As Integer
Dim Counter As Double
Dim CounterMax As Double
Dim sPath As String
Dim FileCounter As Double
'Output File
View 9 Replies
View Related
Apr 24, 2008
how I would go about addressing this issue. I am given a directory with individual files in it. Each file has critical information I have to extract from it. So, I want the user to provided this directory to the macro and I want the macro to cycle through each file in this directory (excluding super and sub direcories), open it, retrieve info, and close it
View 5 Replies
View Related
Mar 10, 2008
I have opened a .txt (by right clicking and selecting Open with rather than open from within Excel) file with numbers using the format 1,234,567.00 but in my country we use 1 234 567,00. So I created a macro changing the , into "" and the . into , and it works fine while creating the macro itself (by using the macro recorder) and the numbers shows and behaves like numbers. However, when running the macro on a new file some numbers remain as text whereas others are numbers. Theres is no common string, eg that numbers starting with - (minus) remains text.
It does then not matter if I go to the format function and select number with decimals and thousand dividor - the number still remains as text. I have also tried the suggested multply by 1 but it still remains as text. The only thing that helps is to either double click on the number or use the Konvert text to number. But I would then have to click each number in the whole table which is what I wanted to avoid.
View 7 Replies
View Related
Apr 25, 2007
i need to make a macro that takes workbooks or files and
runs them through another macro. i already have the 2nd macro
done and it is working perfectly i just need to know how to make the one
that finds the other files and runs them all through the macro i already made. My boss said that he will have about 150-200 files to run through this macro.
View 9 Replies
View Related
Jan 31, 2007
I want to loop through all the open workbooks and search for a text and activate the cell that has the text. I try to use the following code but it doesn't work.
Sub findcell()
Dim wkb As workbooks
For Each wkb In Workbooks
wkb. Sheets(1).Cells.Find("sometext").Activate
Next wkb
End Sub
View 7 Replies
View Related
Jun 23, 2008
What I have is a bunch of text files and 2 spreadsheets that sort the text files. I’m not sure but I think there might be a better way but the problem is I don’t know VB all that well. Can someone take some time and look over this stuff and let me know if there is actually a better way to make this happen. I also noticed that there are 2 txt file missing and not added in the sorted file (PS3_HIGH, PS3_URGENT)
The text files come from another network and are transferred manually every day to a folder. The purpose of the .xls files is so that someone can look at the counts and try to lower the numbers from day to day. If something is alarming frequently, the current files do not put that information together well. The numbers are still important, but is there a better way to do this sort in excel?
View 9 Replies
View Related
Jul 2, 2009
To go through all the database files (.txt format) in a designated folder in order to update an Excel Sheet with the required information from those database text files. Then to summarise the information in a simple table.
The text files are individual Market Exports from a game I play, and are titled as "Region-ItemType-YYYY.MM.DD HHMMSS.txt"
eg. "Heimatar-Tritanium-2009.07.02 133353.txt".
I need to know how to sift through the text files to find the most recent one with matching "Region-ItemType" parts in the file name, and refresh the Excel Sheet with the updated data.
After that, I need to be able to combine all of the cheapest sale prices for each item, with a minimum amount for sale (differs per item), while also being limited to location the item is being sold at, into a single sheet of the important information I wanted to extract in the first place.
At the end of the whole process, I need to have a single Excel Sheet with every different item's lowest price for each different place, displayed in a table I can use to make formulas from.
So if I have an export from a place called "place1" and one from "place2", looking at the same item called "item1", I should have two rows of tabulated data, one for each place's lowest price. And this should update at the touch of the "Refresh All" button, or... However you'd have to do it
I have attached a copy of one of the database text files.
View 11 Replies
View Related
Dec 11, 2009
Hi all, first up I'm a total novice but I'm trying to populate a worksheet from a text file, but here's the kicker, I'd need specific lines of the text file to populate specific columns.
None of the text files will contain the same data, but, they will all have the same related data on the same lines. So I'd like to see:
.txt file 1 line 1 > Worksheet A:1
.txt file 1 line 6 > Worksheet B:1
.txt file 1 line 12 > Worksheet C:1
.txt file 2 Line 1 > Worksheet A:2
.txt file 2 Line 6 > Worksheet B:2
etc.
Everything needs to go into the same worksheet. Some .txt files won't have any data in the specified lines so skipped if blank, or just blank data copied.
I need to run through about 1300 .txt files in a directory in this fashion, can it be done?
View 14 Replies
View Related
Sep 25, 2002
I have a whole lot (hundreds) of .txt files that contain fixed width data that I need to convert to Excel format. I can open each file and step through the Text Import Wizard, then save it as an .xls file, but I'm wondering if there's a way to convert all the files in a given folder from .txt to .xls without having to open each one while (here's the kicker) still placing the data between the spaces on the .txt file into individual cells and columns like the wizard does.
View 9 Replies
View Related
Apr 27, 2007
I am gathering data over several sheets and need to export it as a.txt file.
The problem is that in excel the data reads 1,2,3,4 and when I export it or save as or open and paste to the resulting data reads "1", "2", "3", "4,".
How to I get the txt file to not have the ""'s?
View 9 Replies
View Related
Dec 3, 2008
I have two text files with huge data in each which I need to compare for difference between each
for e.g.
file 1 would have following records
12345 KKKK 3510 ABCD
file 2 would have
12345 KKKK 3210 ABCD
file 2 would have similar records but 3510 would have difference. What i need is " if 12345 and ABCD is matching then what is the difference value of 3510 and 3210 ? the result should be 300 . This i need as an output in another text file.
View 9 Replies
View Related
Sep 15, 2009
i have a txt file see attached and i need macro to:
1)open the file
2)find the word "Dimension no: 3"
3)go 2 lines dwn and copy the number " 64.999"
4)paste it into excel
file:me.txt
Dimension no: 1
Plane:PL1
Flatness 0.003 0.200 *---
--------------------------------------------------------------------------------
Dimension no: 2
Circle:CR1
Diameter 113.001 113.000 +0.000 +0.300 0.001 *--+---
--------------------------------------------------------------------------------
Dimension no: 3
Circle:CIR0
Diameter 64.999 65.000 -0.300 +0.300 -0.001 ---*---
--------------------------------------------------------------------------------
Dimension no: 4
Plane:PL1--Plane:PL3
Lengthavg 15.500 15.500 +0.000 +0.100 -0.000
View 9 Replies
View Related
Nov 14, 2009
I have thousands of lines in a txt file and would like to total the sum of a field. here are the few lines in the txt file.
I would like to calculate the LPG_Amt for each of the Company_code and the count of number of lines for each of the Company_code. Request the members to help me with a vba code that could run in an excel file and give the output in excel.
Company_codeShip_to_PtLPG_Amt
DK01100281757,454
DK011002817620,630
DK011002818012,929
DK011002818121,783
DK011002818324,470
DK011002818512,478
DK011002818621,692
DK011002818714,424
FI011002872728,708
FI011002873122,114
FI011002873237,827
FI011002873362,425..................
View 9 Replies
View Related
Feb 8, 2007
I have a text file that has been saved via PL/ SQL code from a CLOB (due to the MSDAORA not supporting CLOBs). Unfortunately, due to passing the file between operating systems it appears that the CR and LF characters are not consistent. This means that my third party application in Excel cannot read the text file properly.
View 2 Replies
View Related