I have a macro that creates an email based on the contents of each column in the worksheet. The macro works great, but I would like to format a column (A) which contains numbers into the Comma Style, prior to sending out the email.
Is there a VBA code that will format a given column (A) into a certain style (Currency, Comma, Percentage, etc) ?
I have a spreadsheet with a content in cells. Some of the cells are indented left and some aren't. I would like a macro that groups all of the cells that are indented left above the cells that are not indented.
I've attached a spreadsheet : Book1.xlsx
Is there any way to modify the 1st style under the Light category? I like it because it's the most simple but it won't allow me to Modify or Duplicate. Is there a work around to duplicating/copying it? I've tried manually creating a new style but I can't get it to get the lines fills correctly.
View 2 Replies View RelatedI'm a fan of the Excel 2010 table styles, but can't figure one thing out. When I create a table in excel (Ctrl+T), I like to reformat it with a new defined style. When I save the style, I can use it while I'm in that instance of excel, but when I close and reopen excel, the style is gone. How to save the custom formats to they are always available?
View 3 Replies View RelatedI need to list 4 digit numbers in each section followed by commas, but whatever I do it goes to 3digits (e.g. I need "1234,5678,9123" and as soon as I hit Enter it goes to "123,456,789,123"). It wont work to format as text because I have a whole bunch of 12 digit numbers to break up into 4.
View 9 Replies View RelatedIs there any way to change the decimal point from the usual period symbol (.) to a comma (,). The reason being, i have a structural design spreadsheet and the new terminology is just so, changed from 00.00 to 00,00 I have tried cell formatting but it just uses a comma (,) for numbers in their thousand and it wont do what i need.
View 3 Replies View RelatedI am having problems applying custom format to numbers that need to be formatted.
custom format use is 0",00". When I apply the custom format above to whole numbers, I achieve the results I want:
0.00
20.00
40.00
becomes
0,00
20,00
40,00
However, when I apply to numbers with decimal places
0.20.......
how I can change the custom format so that the period is replaced with a comma but the decimal values are preserved?
I have an excel that gets updated monthly with new sales data. The sales data comes straight from our custom CRM system in a .xlsx file. All columns on this spreadsheet have a column type of general.
In the excel that is updated monhtly however their are certain columns that are set to a date type so that we can group pivot tables by date. Currently I have to paste the data that is exported from our CRM system into the monthly spreadsheet (beneath all the prior months data), create a new column next to any date field and then use the formula
Formula:
[Code] .....
I then have to take the resulting data and paste them as values over the original data so that it is in the correct format.
Is there a quicker way of doing this so I don't have to keep adding a new column and doing the forumula, can I somehow set the column so it automatically converts data in a general format to a date format.
How to set macro shortcut for toolbar items which do not have a shortcut already like the "," style button which converts 12000 to 12,000
View 6 Replies View RelatedIs there a macro that can select all cells with a certain style and then clear the values. The idea is that a big document has cells that are formatted as "entry-fields" and others that are not. I want to be able to select all of them with a macro (they are everywhere) and clear them of their contents (hence a reset button for this style).
I've tried something with If Target.Style = "entry-field" Then but i don't know how to search for them and have them in Target or a variable in the first place.
From the keyboard, if you select a chart with data labels, right click the data labels then "reset the data lables to match style", it works fine; but there appears not to be a programmatic equivalent to accomplishing this same task... at least the macro recorder does not shed any light on the subject. Is there code available to do the same thing?
View 3 Replies View RelatedI am still in the process of creating my Invoice, and now I want to add a proper save macro. I want to add a Macro button, which when clicked it copies that invoice sheet as it is and then places it at the end of the sheet tabs, so they're saved after the first 2 important parts of the invoice, and then saved in time order. If possible, i'd also like it to rename the invoice tab to the Customer's name/lastname IF Possible. I've attached the file so if someone fancys trying to do it for me, they can. I want these saved sheets to be seperate for each invoice/customer, and I want them to be in the same file as the invoice 'creator' it's self.
View 6 Replies View RelatedHow can I replace the border style with a macro across my entire data?
I would have assumed something like this would work:
[Code] .......
I have a leave history report with data for leave taken for the 2014 year. The sheet contains the following headings:
Name; Leave Start Date; Leave End Date; Date Paid; Days Taken; Roundup; Offset
The roundup column rounds the days taken up, for example if someone took 0.4 days off it would round it to 1.The offset column just subtracts the Roundup value by 1 (=Roundup-1) I think we will need this for what I am trying to do.
I have created a new spreadsheet labelled gaant chart, this shows the name of the employee with the working dates for the year and has the following data:
Name
1/01/2014
2/01/2014
3/01/2014
6/01/2014
7/01/2014
8/01/2014
9/01/2014
10/01/2014
[code].....
What I would like for the macro to do is lookup Employee 1 from my gaant chart table and search the leave history data if it finds a relevant start date for the employee it marks that date with a 1, it then looks in the offset column and marks the number of offsets to the right. For example if employee 2 took leave from 1/1/14 to 3/1/14 the macro would mark a 1 on the 1/1/14, and search the offset column which would have 2, it will then mark a 1 in the 2 cells to the right of 1/1/14 also (these being 2/1/14 and 3/1/14)
I am an Excel Novice. I don't know very much at all about how it works, what formulas are or any of its intracacies. My job requires me to take information from an Excel file that is emailed to me.
I need to know in the simplest terms how to take the first column (which is last names) and add a comma to the end of each name (one in each cell) all the way down that column, before I copy and paste them, so they will read "last name comma space first name".
excel spreadsheet that has data in column A like in the attached example spreadsheet. How can I make this into a comma delimited list? So something like this...
food
drinks
home
shelter
ocean
water
to this ---> food, drinks, home, shelter, ocean, water
I have hundreds of email addresses listed in a Wordpad file- entries are
separated by a comma. When I use the Excel Import function, all data is
successfully imported into an Excel spreadsheet- BUT in a single row. I would
like to have this info in a single column (A)- then I could easily
alphabetize the entries and eliminate duplicates.
I have a list of data in individual cells in one excel column thus...
Item 1
Item 2
Item 3
And I would like the data to read thus in one cell...
Item1,Item2,Item3.
Is there an excel function I can use to do this quickly and efficiently?
I have a list of terms in a spreadsheet. Assume they start in cell A1 and they descend down for the next 300 cells. Basically I need to pull those terms into a single text string where the terms are comma delimited.
What I have been doing is concatenating them so they all end with a comma, copy them 25 at a time, pasting values and transposing then running a concatenate formula for the 25 terms. Do this 10-15 times to create that many comma delimited lists then concatenate those lists to create one all in one list.
Example:
The list (starting in A1) looks like this:
Dog
Cat
House
Car
Boat
Mom
Dad
but I need:
Dog,Cat,House,Car,Boat,Mom,Dad
If possible to do this with a formula please do so as my knowledge of using VBA modules is limited but if this must be done using VBA please realize that I'm in the thrid grade compared to your knowledge so please explain how to implement the module as clearly as possible.
I need Macro to Format all cells in column according to value. The cutoffs are >20, between 21 and 50 (>21;<50) and greater than 51 (<51).
I have macro to consolidate cells from multiple files to single workbook. Now I have to 'color code' the value in all cells in column 'B', all as part of one large macro.
When I add a table in Excel, I can choose from Table Styles, different styles that set one color for even rows and another color for odd rows.
Is there a way to say to this Table Style that assign one color for rows that have the same string in column A in consecutive rows and another color when the string in colum A changes?
I mean,
If A1= XYZ, A2=XYZ assign blue to row 1 and 2.
If A3:A9=FTG assign green to rows 3 to 9.
If A10:A13=LLKF assign blue again to rows 10 to 13.
If A14:A22=WUR882 assign green again to rows 14 to 22.
and so on.
I have a list of companies and employees, if a company has more than 1 employee listed, I need to combine all instances of the employees into 1 row per company separated by a comma.
OLD FILE: Sample.xlsx
NEW FILE: Sample.xlsx
I have a column A1 that consists of a range of values separated by a comma.
row 1:value 1, value 2, value 3, value 4
row2: value1, value 4
Row 3: value 2, value3
I want to get the unique counts for each value in the filtered list. This one field is not filtered but the others in the table are so I only want the counts of value 1-4 when the entire list is filtered.
I have been able to accomplish this with individual values using the following formula:
=SUMPRODUCT(SUBTOTAL(3,OFFSET('1. Respondents'!$C$7:$C$39312,ROW
('1. Respondents'!$C$7:$C$39312)-MIN(ROW('1. Respondents'!$C$7:$C$39312)),,1)),
--('1. Respondents'!$C$7:$C$39312=C4))
This works great other than the fact that I need to count total values of the column in an array.
I wanted to separate my cell values with comma into a column
Item
DepIDs
No
IDA
1
2000
1
2000
[Code]...
the output will be below table,
Item
IDA
DepIDs
1
2000
2000
[Code]...
I am trying to create a macro that will create a comma and space between every 5th character within a cell. that would be preference #1. What I decided to go with for now, instead, is to try (using the macro recorder) text to columns, fixed width, and do this after every 5th character, and selecting each cell to be formatted as text.
What I am having difficulties with is trying to tell the macro which cells to touch and which ones not to. I do not want the macro to do text to columns and fixed width on simple text. I only want it to do the macro when it is a string of numbers that, during transfer from PDF to excel, have been concatenated into one cell. I also want the macro to do this for infinite number of rows. I have excel 2007.
I am attaching a small excel file with examples of data I am working with. I have saved this excel file as a 97-2003 version for those who do not have 2007. As I stated, if anybody can help me figure out how to do a simple insert comma space every 5th character where information has been concatenated, that would be preference. Also, I am not trying to change anything within column A. Only column B. On the sample file please note B3 - B6. Rows 5 & 6 are fine as they are. Other problem rows include B11 - B13
I have extracted a string from my address database which goes like name,address1,address2,city,postcode,country
I need to display in Column B as:
name
address1
address2
city
postcode
country
how to do this using VBA.
I am trying to execute a script I copied from this site to transpose a column of values into unique rows. There was a very similar thread to my question, but the code does not work for my situation as I am a newbie to VBA. The referenced thread was Need to transpose multiple comma separated values
I would like to comma delimit column "D" into unique rows per value while maintaining the relationship with the data in the other columns. Here is the example of my data:
GA-AG-00010-A-2013
Apache Hunting Club
709
36
GA-AG-00020-A-2013
Tiger Branch Hunt Club
1596
71, 72
GA-AG-00030-A-2013
Big "O" Hunting Club
3058
59, 64, 65, 75, 79, 84
I want to make each value in Column D a unique row and still be associated with Column A-C. When I run this code I get a Runtime script error 9.
Sub SplitKeywords()
Dim MyArr, v As Long, i As Long, LR As Long
Application.ScreenUpdating = False
LR = Range("A" & Rows.Count).End(xlUp).Row
[Code] ......
How to correct this? My actual data spans from column A-Q and can place the "split values" in column Q.
I am looking for a code to insert alt-enter into a cell or a column with a defined comma count per line, saying 5
is
C1,C2,C3,C4,C5,C6,C7
C8,C9,C10,C11
want to change the cell(s) as
C1,C2,C3,C4,C5,
C6,C7,C8,C9,C10,
C11
Comma separated data on sheet 2, look up info on sheet 1, return comma separated data on sheet 2.
Sample file attached : Book1.xlsx
providing a macro to save an excel sheet to comma delimited txt file. Also, My sheet has 1st row as table columns and i dont want to export them in my txt file.
View 14 Replies View Related
