Using VBA To Update Workbook B Extracting Data From Workbook A
Mar 27, 2014
In order to do the tests, I'm using 2 simplified workbooks (test_copy and test_paste).
What I'd like to be able to do, once I click a button UPLOAD (creating the button isn't the problem), is to go to the first cell from workbook test_copy, check if that code is already on test_paste and if not add it to the bottom of the list, repeating the same cycle for each code on the workbook test_copy.
The orders of the codes might change on both workbooks differently depending on the way the columns are sorted. That is why I believe that for each code in test_copy I need to check the entire column in test_paste to check if the code already exists.
At the end of the routine, on the example below, we would have the codes 2670, 2676 and 2626 added to the end of the list on test_paste.
i have a workbook blank template for my colleagues to fill in, they fill in this blank template and save it under the serial number of the item they are creating. However a lot of errors exist when they input the serial number inside the workbook where the serial number is a duplicate of a former serial number.
Anyhow i was wondering is there any way when they input the serial number into the worksheet that i could get it to save in a separate workbook and then have conditional formatting to check those serial numbers in the workbook to see if they match?
is it possible to place sheet names beside the data? What I mean is that, I'm currently working on a report which extracts data from the current workbook (many sheets) and paste it into a new workbook. As there would be duplicates due to many different sheets. I would like to have the duplicates removed but have the sheets name which they are found in the columns beside.
I'm currently facing problem with double for loop in the previous vba ,extracting data from closed book. however, it uses only one for loop to extract all data. I need to extract lots of data from the book and thats why i double looped it to extract more data. however, i can only get the first line of data i can't extract any more data from then on.
Sub RunCodeOnAllXLSFiles() Dim lCount As Long Dim wbResults As Workbook Dim wbCodeBook As Workbook Dim rCell As Range Dim lCount2 As Long
I am working with multiple workbooks with several tabs in each one. I need the forumula to update the "sheet name" from the source workbook even if the destination workbook is closed.
this is a portion of the forumula I am working with:
I am working on a workbook in which I extract data from a SQL database into a sheet with more or less the following format:
ID_Company ID_Level ID_XX
[Code].....
The aim is to extract a list of any employee that has been tagged as "NEW" in the last column, with his/her detail as per the column headings - and place the resulting list in another sheet. The extract is done dynamically and varies from month to month. So in other words the column headings 2013.MAY and 2013.JUN will change next month to 2013.JUN and 2013.JUL respectively - and so would the detail of the data below them as well. The "NEW" tag is simply assigned through an IF statement.
I had a look at most of the Excel Magic trick video clips on YouTube and managed to get a data extract from my main data sheet - BUT was only able to do the extract on the SAME sheet and NOT onto another sheet in the same workbook.
I am looking for a quicker way to filter and extract data from a closed workbook. My current code opens the file and then does the necessary filtering before copying into a separate workbook, however, the workbook I am opening is huge and takes several minutes to open.
how to update one cell data from one workbook to second workbook. it should be as when i open second workbook it should automatically update that particular data. for ex. In workbook one cell A5 data should be updated on workbook two cell S10. Whenever I open open workbook two S10 should be updated according to A5.
I created a form and the values that it takes are Date, Issue, Name, Team Member and Cause.
I use a Production Support Report (workbook that I don't want open for people to see) and it will have tabs for each month ie; January
how can I without opening Production Support Report grab the values from the form then update the Production support report by finding the months sheet and sticking the values at the last row.
I have a weekly report which lists items and their available date. This list is always changing - new items added, old items removed. These items are required for 4 different projects and the item listed says which project the item date is for. There is also the same item across different projects which also have different dates which also appear and disappear each week depending on requirements.
I want to be able to capture the date for each of the items per project per week. Ultimately, I want to be able to track the movement of the date per item per project. I have attached a sample of how I want it to do.
I have 1150 workbooks with two sheets each. The workbooks are all named with employee names (SNUFFY,JOE.xlsx etc). The sheets in each workbook are for different years. Both sheets in each workbook are set up the same. The only differences are the values in cells. I just made another workbook where column A is a list of all 1150 employee names (SNUFFY,JOE etc). I want column B for each employee to show the values in say sheet 1 cell G1 of that employee's individual workbook, and column C to show the value in sheet 2 cell G1. How do I make that happen?
I have a master workbook the needs to be updated from another workbook. I have adapted the following code that I found hidden away in this font of knowledge.
Sub test1() Dim wb1 As Workbook Dim wb2 As Workbook Dim OldLastCell As Range Dim lookRng As Range Dim foundRng As Range Dim iCel As Range Dim loopRng As Range If IsWbOpen("Update") Then Set wb2 = Update Else Set wb2 = Workbooks.Open("C:Documents and SettingsCompaq_OwnerDesktopAreaUpdate.xls") End If Set wb1 = Workbooks("Original.xls") With wb2. Sheets("Sheet1")...................
I have two workbooks: master and student. I have one spreadsheet in each workbook. Both workbooks contains data in the same range.
master.xls data = B1:B10 (values are integers) student.xls data = B1:B10 (values are integers)
I want to know how to update(add) the values in master.xls with the values in a closed workbook(student.xls). Basically if master("B3") = 5 and student("B3") = 1, it will update the value in master("B3") = 6.
I can’t get Excel 2002 to resolve an external reference to a value in another workbook.
If I have the following literal expression in a cell in my active worksheet, it works: ='C:Documents and SettingsMy DocumentsHCSSAC123.xls'!NumSAC
In this case, the contents of the variable NumSAC is copied into the active workbook from another workbook named SAC123. This works fine without the SAC123.xls workbook being active.
But what I really need to do is have Excel reference an expression that I form by concatenating together strings and a cell value (from the active worksheet).
The following expression evaluates to be exactly the literal expression above (which worked), but it doesn’t act as a valid reference. =”'C:Documents and SettingsMy DocumentsHCS" & $B12 & ".xls'!NumSAC" The result displayed in that cell is 'C:Documents and SettingsMy DocumentsHCSSAC123.xls'!NumSAC and not what I want.
If I try to use the INDIRECT function with the above character string, like this, =INDIRECT(”'C:Documents and SettingsMy DocumentsHCS" & $B12 & ".xls'!NumSAC") then I get #REF!
However, if I open the SAC123 workbook (so that it is in the ring of active workbooks), then I get the correct value put into the cell.
The INDIRECT function only works if the referenced workbook is active.
Is there a way of having Excel evaluate a character string as a valid reference without having to have the referenced workbook(s) active?
In my case, I want to have a master active workbook that references over 200 other workbooks.
All i did was i just created a form to open a workbook from the directories.
Code to copy the data from that recently opened workbook to my workbook where I have my forms. I need to copy that data as in the case that i don't know the workbook and the sheet name i'am going to open as i may open any of the files!!
I've been using the following code to bring in individual cell values from one closed workbook to an active one. I would like to modify this is possible to bring in multiple cells at once and also pull them into a different worksheet in the active workbook. Basically, my command button is on Sheet1 but I'd like the data to pull into a cell on Sheet2.
Private Sub CommandButton1_Click() With Range("Q9") .Formula = "='C:Users[Workbook Name.xlsm]Worksheet Name'! N27" .Value = .Value End With
I am looking for a code that would copy the data from each worksheet in a given workbook and then paste to just one worksheet within a different workbook. The Sheet names are auto generated when I run this canned report but the naming structure is always the same...the first worksheet is named Repair Details and then the next sheet is named Repair Details_1, the next sheet is named Repair Details_2 and so on for every sheet in workbook. So I would like to copy all of the data(Headers to last cell) and then paste in a worksheet(ex: Master Repair Report.xlsx and the worksheet could be titled Master Repair Details) on a different workbook, then the next sheet would copy from the one under the header to the last record and paste to the same workbook. This process would repeat for every worksheet in the Repair Details Workbook and paste to Master Repair Details worksheet in the Master Repair Report workbook.
I have some vba that opens a closed workbook, copies data from a named range and then pastes it to the active workbook.
However, what is happening is that the closed workbook is opened and only part of the data is pasted. What I would prefer to happen is this:
Open the closed workbook-->copy the named range-->paste(append) to next empty cell in column B.
Heres the code that I have got.
Sub Workbook_test()Dim wb As Workbook Application.ScreenUpdating = False ' turn off the screen updating Set wb = Workbooks.Open("G:WAREHOUSEPlanningSmartNew Training Plan raining plan.xls", True, True)
what VBA is required to have a combo box in a userform look up data in a different workbook, then populate that data into the drop down list of that combo box for a user to select.
I have managed to successfully create a vlookup for a combo box in a userform that looks up data in a named range in another worksheet within the same workbook and then populate that data into a field in a worksheet within the same workbook. However, I want to change this so the combo box on a userform (in one workbook) will look up data from a named range in a second workbook without opening the second workbook. At the moment, the code I have that will 'submit' the user selected data from the combo box drop down list works.
The code that has worked so far to vlookup data for the combo box from a worksheet within the same workbook is:
Code: Private Sub UserForm_Initialize() Dim pName As Range Dim ws As WorksheetSet ws = Worksheets("vlookupsheet") For Each pName In ws.Range("ProjectName") With Me.cboProjectName .AddItem pName.Value End WithNext pName Me.cboProjectName.SetFocus End Sub
Do I need specify the file path of the second workbook that will contain the data for the combo box as well as the name of the worksheet and named range in that second workbook?
On one workbook I have "column A" that lists serial #'s, one serial number per cell. What I need is to be able to take all the non blank data from that column and copy it to another workbook with all those serial #'s in 1 cell numerically sorted and separated by commas.
I would like to use a command button to copy a row of data from one workbook to a column in another workbook. The row of data will have different values on a daily basis but will always be B2 through BE2. I would like the copied row of data pasted in the next available column to the left in the other work book.
I have data in 2 different workbooks, and I need to transfer all data in 'Jx_ex1' to sheet1 in the 'template' workbook, and all data in 'Gr_ex1' to sheet2 in 'template' workbook. All data should be transferred to the same cell numbers, from A1 to Y5000. I actually have loads of workbooks to transfer to the template but if I have an example with the two then im sure I can work out how to modify it. All files will be in the same folder.
I have created a workbook that imports data from another workbook which is used frequently on a network drive. After I import the data to my new workbook, it locks the original workbook for editing. Is there a property that will allow me to disable this 'locked for editing' read only mode or any other way to get around this?
I have created userform and it works fine. Following code assigned to 'SUBMIT' button in userform - works fine. I am trying to include code where certain data from userform is also copied to workbook2 ( of course without opening it)- as marked in red...below
So I basically have a template workbook that the code is stored in. I need it to pull an entire row if Column C in workbook "rawdata" contains specific text, in this case "PRCH - Purchase".I have never had to do anything like this before, it has always been working in the same workbook. It's failing at the 'mp = ...' line every time. There might be other errors in the code too, I just cannot resolve the first one!
I am creating a spreadsheet to provide to a group of about 40 people. The spreadsheet allows each member to track the referrals they receive and give. I need to plan on creating updates for the spreadsheet and want to make it so they can easily transfer their data to the most current version in the future. Here is a breakdown of the workbook:
Worksheets: Members Lists Referrals Given Referrals Received Totals Formulas
I need to copy the data that they have input from the following worksheets: Referrals Given Referrals Received
Here is a breakdown of the "Referrals Received" worksheet: A1:V4 - Data that will not change and includes many named cells A5:Nxxx - Dynamic Named Range where they input their data O5:Vxxx - Contains formulas
I need to be able to copy A5:Vxxxxx from the old workbook to the new
Some side items to note: There is VBA in the worksheet of Private Sub Worksheet_Change(ByVal Target As Range) and included in the code is an Unprotect & Protect code to always keep the sheet protected
I figure whatever works for this sheet will work for all the sheets.
