Using Dropdown Box To Find And Copy Row To Separate Sheet
Mar 12, 2014
I have a table (called 'tblFuels' on worksheet"Fuel Data") which contains Fuel Names in column A, I have named the range 'FuelNames', there are several properties for each fuel in columns B to V.
On a separate sheet i have a dropdown box which is populated by 'FuelNames'. When a fuel is selected from this dropdown list, and a button pressed, i would like the corresponding row to be copied and pasted in to a third sheet for use in calculations etc.
The internet has given me several ways of doing something like this and I've given this one a crack, it just doesn't work.
Sub Find_CopyRows()
For i = 4 To Worksheets("Fuel Data").Range("A64000").End(xlUp).Row
'("InputFuelSel") is the 'range name' of one cell which contains a dropdown list of all the fuels found in column A
[Code] ......
Fuels Spreadsheet.xlsm
View 1 Replies
ADVERTISEMENT
Feb 25, 2013
I have a document which is full of HTML code. Please find attached. I have copied the information into an excel document and I need to find Twitter addresses i.e @test123 and place these in a separate column.
If i make a search there 190 of these addresses.
View 1 Replies
View Related
Dec 18, 2012
I am trying to figure out a formula that performs the following function:
I want it to find the date in column A in Sheet2 in column A in Sheet1 and return the highest value of column D(sheet1) for that same date. Is there a formula that can solve me that?
I attach an example of my worksheet.
View 2 Replies
View Related
Jun 1, 2012
I am trying to work out some code that will allow me to search worksheet2 to find the last filled cell in column A.
I would then like to copy the contents of the cell.
Then past this data into the first empty cell in a column in worksheet2
View 1 Replies
View Related
Nov 18, 2013
I have a workbook with four tabs or four sheets.
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
View 6 Replies
View Related
Jan 16, 2014
Need achieving the following:
I have 2 sheets in one workbook, the first sheet named D1 where I have dropdown menus and the second sheet called reference where I have fixed data
what im looking for is when the user select an option from the dropdown menu on cell b3 on "D1" sheet based on the selection an entire table (4 rows by 3 columns) called "Default" from reference sheet to be automatically pasted into the D1 sheet.
View 1 Replies
View Related
Mar 19, 2014
I have a workbook with 4 sheets relating to areas and a summary sheet and introduction.
On the introduction sheet I have a dropdown which lists all the available products my company make.
What I want is to be able to select the product from the dropdown and then click a button which will then copy and paste the headers and any rows which relate to the selected product from each of the area sheets and paste it all onto the summary sheet.
View 14 Replies
View Related
Jan 3, 2013
I am after some VBA code that chooses each value from a drop down list (in cell A1) then copies a separate sheet 1 (sheet 1) into another workbook (can have both workbooks open at the same time or the first step will have to create a workbook) with the name of the added sheet renamed to the value chosen from the list. When the second value is chosen then sheet 1 should be copied into the newly created workbook as well.
Sheet 1 has lookups that are updated when the new value in the drop down list is chosen
There are around 85 values in the drop down list so I'm expecting a workbook with 85 tabs (copy pasted values and formats)
View 1 Replies
View Related
Feb 12, 2014
I am trying to write a simple macro to copy a drop down list I created in cell O2 and then paste in the same sheet. I need it to paste starting in cell A2 and then move to A4 and so on for every even row cell through A9778. I would also like it to keep a border around the cell. I can't find direction on how to tell it every even cell or defining x and then doing x + 1...
View 3 Replies
View Related
Apr 25, 2013
I'm trying to copy data from one sheet to another sheet automatically based on a number selected in a drop down control.
I have used OFFSET to pull some information successfully from a list. This is easy for me to do with single entries and a list and has worked well. I want to do similar but with a dataset not just single cells.
But, I can't seem to make OFFSET work to show a set of data easily.
Perhaps I will need VB code to do so? Or there is another control I'm not aware of? I've done very little with VB.
I'll attach a sample file to try to show better what I'm trying to do.
View 7 Replies
View Related
Aug 13, 2012
Using macro's on Excel 2010. What I'm trying to do is create a macro that will copy a range of cells from one sheet to another depending on a option being selected from a drop down box. I've tried to use formulas but without success.
sheet 1 contains a list of approx 20 people with rows containing sales figures per week.
Is it possible to have a macro that will copy the rows to sheet2 depending on the dropdown? The drop down has already been setup with people's names
E.g.
if sheet 1, cell a1 (with data validation setup) dropdown contains "mr smith", copy sheet2 row A1:A9 to sheet 1 cell a2
or
if sheet 1, cell a1 dropdown contains "mr cooper", copy sheet2 row B1:B9 to sheet1 cell a2
etc... for each name in the dropdown
The idea is so that i select a dropdown and it copies the sales figures that match the dropdown name, if i then select another dropdown, the corresponding figures are copied to the same place.
View 3 Replies
View Related
May 13, 2014
I have created a sheet and have two drop down menus that allow me to show a picture depending upon the answers from the drop downs. I have used Macros to define what needs to happen on two of the drop downs. Here is where my brain starts to lose it. I would like to create two more drop downs (which I have on already done) that will allow for two more pictures to be shown. Equalling 4 pictures in all.
View 2 Replies
View Related
Jun 2, 2014
I want to do is add data into Sheet A each day then press a button which will copy the data in a range and paste it into Sheet B, but I want to create a list of all data so I need it to find the next empty cell and start the paste from there (if that makes sense).
I want it to create a data base on one sheet from a daily import, I have a code to copy one cell to next empty cell but dont know how to duplicate it to a range.
I hope I have given you enough info this is what I have done so far
Public Sub CopyData()
Dim ws As Worksheet, bi As Byte, vData(1 To 1)
Set ws = Sheets("A")
For bi = 1 To 1
vData(bi) = Application.Choose(bi, ws.Range("A1"))
[Code]....
View 7 Replies
View Related
Jan 3, 2013
I was wondering if there is a way to have a single cell display a value and a drop down list that shows the chosen value. For example, I want to be able to enter into a single cell "365" and select "Hours" from a drop down list and have both be displayed in the same cell. I want to do this because I like to be able to sort my spreadsheet and I have a lot of information that spans across the row that I want to keep tied together. Is this even possible?
View 2 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Jun 18, 2014
I am trying to create a macro that copies the values from A2 to the last row of data on sheet1 and past them to cell B2 on sheet2
View 2 Replies
View Related
May 31, 2012
I have a workbook with two sheets. The idea behind the workbook is an Interview Guide to be used just before an Interview. For now my problem is this.
Sheet 2 "Competencies" is just data. It stores competencies with their associated definitions and questions.
Sheet 1 "Control Page" is the sheet where the questions will eventually go. The user (Interviewer) will input data on the first two pages which will include name of candidate, date of interview etc. but they will also select 5 Competencies from the already existing drop down menus on page two. From there as the selections are made I wish for a code to copy the corresponding definition on sheet 'Competencies" to cells lower down in sheet "Control page".
I don't see a place to upload a file as I have a sample of the sheet ready to go.
View 2 Replies
View Related
Jun 24, 2014
I'm supposed to find duplicates in sheet_1 Q6:Q251 and copy one of each to sheet_2 D6:D243 as well as unique values from the same column. In a sheet_1 B6:B251 I have values related to Q6:Q251 and I have to copy each of them to sheet_2, E6:I6 in the same row as the related duplicate (I'll have max 5 duplicates). You can find attached simple example of what should be the result (sheet_2)
View 7 Replies
View Related
Oct 16, 2013
I have a value in sheet3 cell "C9". (the value is stewart)
I am tring to have the macro go down column "C" in sheet1 and the value is the same as "C9"s value in sheet3 then copy the 7 cells to the right and paste them in the 7 cells right of "C9" in sheet3.
Example: If the value in cell "C9" in sheet3 = "stewart" and the value in "C109" in sheet1 is "stewart" the copy C110:C116 in sheet1 and paste those values in C10:C16 in sheet3.
I guess you wouldn't have to offset, you could copy C109:C116 and paste it to C9:C16 since its the same value.
View 9 Replies
View Related
Apr 7, 2014
I have tried to these through formulas without success but i think i need VBA also which i am not very experienced.
I want to paste a list in the "InsertList" sheet. This list will only contain the word "Correct" or "False". From then on i need a way to search for the word "Correct" or "False" in the columnS P,Q,R,S,T,U,V.
e.g. If in the column "P" on the "InsertList" sheet the word "Correct" is found, i need that entire row from A to V to be copied onto it's destination, in this case "sheet1".
If the word "Correct" is found on the column "Q" on the "InsertList" sheet, the rows from A to V need to be copied in the Sheet2. And so on..
sheet1.png
Attachment: dropbox.com/s/vgs4kzhoa1pip0a/CopyRows.xltm
View 7 Replies
View Related
Jul 9, 2009
Thank you all so much for this wonderful forum. Today has been a day of going through post after post. I am usually able to solve my problems through reading similar issues. However, just can quite get this one and I think it is rather simple, but frustrating none the less.
Attached is a spreadsheet with a list names in column B. The codes I have tried to write or have copied find one name and paste it to sheet 1. However, I need to find several names and then copy each row to sheet 1.
View 14 Replies
View Related
Feb 21, 2012
I need to firstly find data in the main sheet which relates to the activecell and then I want to copy and paste that data into another worksheet.
The simplest of ways I guess would be the .xldown function however this seems to copy the blank cells as well as the cells with data, which is no good. I have therefore written code as below which finds the first cell with data, copies and pastes, then loops.
How do I set the loop to look at the next cell down from the initial copied cell and if there is data in it to paste it into the cell underneath the one I have just pasted into?
Range("D3") = ActiveCell.Offset(0, 1)
SheetName = Range("D3")
ActiveCell.Offset(0, 2).Select
[Code]....
View 7 Replies
View Related
Apr 9, 2006
Looking for days and I have tried all kinds of things but nothing works. The lates was the Kickbutt find function. Let me explain what I am tring to do. I have an estimate work book with 11 diffrent sheets of material. When I create an estimate I go thru the sheets and select the quanitity of each material needed. What I would like to do is search thru all the sheets and find all the quanititys in column A greater than 0, the copy the complete row A to F to a sheet named FoxOrd.
Trying AronBloods "Kickbutt find function" seemed to be the code to use but I could not get x = " >0 " to work. So I got rid of all the default 0 in the qty column and just left it blank and changed the code to x = "*" which searched and found all the numbered rows but this included the header row when pasted to the order sheet
View 5 Replies
View Related
Mar 19, 2007
i want user using userform to search for the wanted data then the displayed data be copy to another new sheet.. and be able to print!
hope the idea is clear!
i will attach the file in case someone wants to show me the example...
View 7 Replies
View Related
May 5, 2007
I have a large sheet with serial numbers of machines in one column and more or less important information in other columns.
I’m trying to write a macro that is activated by selecting a serial number from a list box. The macro should then find the right row and copy cells from that row and paste them on another sheet to create a summary of that machine.
View 9 Replies
View Related
Feb 1, 2009
I am working on getting a macro to find a name in column "B" and once found copy its row to another sheet. I have been working on an "IF" statement that checks for the given name and if true copies the row. I can not get it to keep checking and then stop using "loop" What i got so far:
View 2 Replies
View Related
Oct 9, 2009
Essentially, I have 2 Sheets:
"SheetWSS" = data to be copied
"SheetWSD" = destination of copied data.
Below is a sample of the data in "SheetWSS"
----------A------------------------B-------------------------C
1------Trade ID -------Description---------System no.
2--------579----------------Loan ---------------------- 7
3--------580----------------Deposit---------------------22
4--------702----------------Deposit--------------------- 11
5--------703----------------Loan ----------------------- 58
6--------732 ---------------Loan------------------------66
7--------733----------------Deposit-------------------- 99
etc...(no more than 10000)
Now, an explanation of the data:
1) I work for a small bank (CORP) that takes deposits and gives loan.
2) CORP books these trades using only system no. 7 and 11; other system nos. belong to customers.
3) When a single trade is booked, the 2 sides of the transaction is recorded (by Trade IDs) . E.g rows 2 and 3 relates to one trade. So if CORP loans money with system no.7 to CUSTB, who uses system no.22, it shows for CORP a loan and for CUSTB, a deposit.
4) Everyday, the data in "SheetWSS" is updated with a different number of rows from previous, but the number of columns remain the same.
So, here's what i'ld like the macro to do:
1) Go into Column C, find system no.7 and 11.
2) For each 7 and 11 found, Copy the next row . So if for e.g, system no.11 was found in C4, i want the ENTIRE ROW 5 to be copied.
3) Paste the entire next row in "SheetWSD" until we have a list of all opposing sides of the same transactions initiated by CORP.
View 3 Replies
View Related
Aug 6, 2012
I tried to make something to find a certain value (from a userform) in a range, and then copy the line partially to another sheet. Then go forth to the next found item and do the same. But... I cannot seem to make this loop.
With Sheets("Data input").Range("N5:N1100")
Dim FoundRange As Range
Worksheets("Data input").Activate
[Code].....
View 5 Replies
View Related
Nov 8, 2012
I think I am closer but how do I get all of the data from A2 in the origination worksheet and then copy it to the last blank cell in column A in the destination sheet?
Code:
Sub test4()
Dim lastrow As Long
Set StartSheet = ActiveSheet
'MFG PART NUMBER
StartSheet.Range("R2").Copy
Workbooks.Open Filename:="D:\_DoxaMobiusServtrax Import Template"
[Code]...
View 6 Replies
View Related
Jan 7, 2013
Purpose:
Build a roster from:
Sheets(Settings).Range("A21").Value (this value is variable)
Problem:
Find that A21 value in Range T2:T100 (each value in the range is unique)
Copy that value to Sheets("Roster") E8
and the next 9 values to
E14
E20
E26
E32
G2
G14
G20
G26
G32
Reason for posting: I've been trying to do this with vba but sheet formula will probably work, I can always Copy/Paste Special/Values to clear the formula. Keyword searching has resulted in no progress.
View 2 Replies
View Related
