Getting Each Dropdown To Have Separate Picture Appear?

May 13, 2014

I have created a sheet and have two drop down menus that allow me to show a picture depending upon the answers from the drop downs. I have used Macros to define what needs to happen on two of the drop downs. Here is where my brain starts to lose it. I would like to create two more drop downs (which I have on already done) that will allow for two more pictures to be shown. Equalling 4 pictures in all.

View 2 Replies


ADVERTISEMENT

Link Picture To Dropdown Box?

Aug 8, 2014

I am trying to associate pictures to a dropdown box. The pictures are on a separate sheet. The picture is to be displayed on E20 and the drop down box is in K20. Im not very good at VBA and I accomplished this once before using the =INDIRECT function. But for some reason it is not working now.

View 1 Replies View Related

Dropdown List And Separate Value In Same Cell?

Jan 3, 2013

I was wondering if there is a way to have a single cell display a value and a drop down list that shows the chosen value. For example, I want to be able to enter into a single cell "365" and select "Hours" from a drop down list and have both be displayed in the same cell. I want to do this because I like to be able to sort my spreadsheet and I have a lot of information that spans across the row that I want to keep tied together. Is this even possible?

View 2 Replies View Related

Using Dropdown Box To Find And Copy Row To Separate Sheet

Mar 12, 2014

I have a table (called 'tblFuels' on worksheet"Fuel Data") which contains Fuel Names in column A, I have named the range 'FuelNames', there are several properties for each fuel in columns B to V.

On a separate sheet i have a dropdown box which is populated by 'FuelNames'. When a fuel is selected from this dropdown list, and a button pressed, i would like the corresponding row to be copied and pasted in to a third sheet for use in calculations etc.

The internet has given me several ways of doing something like this and I've given this one a crack, it just doesn't work.

Sub Find_CopyRows()

For i = 4 To Worksheets("Fuel Data").Range("A64000").End(xlUp).Row
'("InputFuelSel") is the 'range name' of one cell which contains a dropdown list of all the fuels found in column A

[Code] ......

Fuels Spreadsheet.xlsm

View 1 Replies View Related

Excel 2010 :: Paste Picture Into Small Picture / Diagram Box?

Mar 19, 2012

In Excel 2010, is there any way to paste a picture into a small picture/diagram box, and upon double clicking the picture it would explode to a larger size? And I guess double clicking it again would make it return to its original (smaller) size. I would be pasting several pictures into several different picture/diagram boxes and would need this to be a relative reference so that upon selection it explodes the appropriate picture?

View 1 Replies View Related

Put Chosen Picture In Comment & Retrieve Picture On Other Sheet

Nov 18, 2007

I want to have a sample file in excel which store picture of student in comment, I did this, but when I want to insert picture the file dialog appears, and if I click cancel, then there is an error, why? If some one optimise the code it would be very nice

View 6 Replies View Related

Display A Picture In A Cell When The Picture Name Is Selected

Jun 18, 2014

I have done the above where when I select a picture name from a drop down list it displays the relevant picture in another cell by using the IF function in the named formula

My question is why cant I use VLOOKUP instead of IF in the named formula. When I use it it comes with an error.

View 6 Replies View Related

Write The Picture Name In Cell The Picture Will Appear

Jan 22, 2009

i have saved some pictures in my excel sheet.
in the next sheet i want that when i write the picture name the picture will appear as vlookup helps in the getting text and nos. can i do this with pictures or i tried to get to much from excel.

View 10 Replies View Related

Insert Picture From File Increases File Size More Than The Picture You Inserting

Mar 17, 2009

I am putting together a price list in excel and using images and hyperlinks to jazz it up a bit - what I am finding is that if I insert a 25KB GIF image, the excel file grows in size by over 100KB

why is this disproportionate growth happening and is there a way around it - I dont want my Price List growing too large but need the images....?

View 9 Replies View Related

Shade A Cell Red If Two Separate Conditions Apply (in Separate Cells)

Dec 3, 2013

I'm trying to use a formula in conditional formatting to highlight a cell red if the cell contains a 0 but the date shown in another cell has passed. I want to copy the formatting throughout a column but I don't want the cell to highlight if there is no date in the other cell concerned.

View 11 Replies View Related

Separate Letters And Numbers In A String Into Separate Columns

Nov 20, 2012

I receive an extraction from AutoCAD that lists the electrical devices in a drawing. I don't have any problems extracting the letters. I have a problem extracting the device number and the device number extension.

The device label extraction is similar to this:
DCM1005-1
DCM1005-10
DCM1005A
MTR1005-1
MTR1005-10
MTR1005A

I want to create 3 columns from the device label: (I separated the column with commas)
A1, B1, C1, D1
DCM1005-1, DCM, 1005, 1
DCM1005-10, DCM, 1005, 10
DCM1005A, DCM, 1005, A
MTR1005-1, MTR, 1005, 1
MTR1005-10, MTR, 1005, 10
MTR1005A, MTR, 1005, A

View 5 Replies View Related

Separate Numeric / Text Combination Into Two Separate Columns

Oct 9, 2013

How can I separate the following numeric/text combination into two (2) separate columns in Excel?

302ALTO
406AMZN
451AMRC
404AMAD
605ANCC
405ADRC

The result would be:

302 ALTO
406 AMZN
451 AMRC
404 AMAD
605 ANCC
405 ADRC

View 6 Replies View Related

How To Separate Text From Numbers Into Two Separate Cells

Feb 13, 2014

I'm trying to separate text from numbers into two separate cells...

Essentially, I would like the users to copy and paste data into Column A, as seen below. Then, hopefully by formula separate the text characters into Column B and the numbers into Column C.

Input: Output 1: Output 2:

Col A Col B Col C
Wells 123 Wells 123
Wells 1234 Wells 1234
Wells Fargo 123 Wells Fargo 123
Wells Fargo 1234 Wells Fargo 1234
Wells Fargo Inc 123 Wells Fargo Inc 123
Wells Fargo Inc 1234 Wells Fargo Inc 1234

Ideally, I would like to do this with a formula...

View 6 Replies View Related

Separate Workbook By Value In Column Into Separate Workbooks

Feb 25, 2013

I have 10 very large workbooks that are all setup in the same format. In column Z is a numerical value from 1 to 83. I have been trying to filter the sheet and then copy one at a time from 1 to 83 but that takes a LONG time especially when there is 10 workbooks to do.

Is there anyway I can run a function or macro or something that would just automatically look down the column Z and put each row into a it's own workbooks?

I have attached a sample of what the workbooks look like right now.

Sample123.xlsx‎

View 4 Replies View Related

Creating Separate Reports In Separate Spreadsheets

Nov 21, 2006

I have a giant data sheet. I have to cherry pick certain data out of the list and send it to certain associates, in a new spreadsheet.

I want to do this automatically.

I can create the macro to select the data I want, and copy it over (values only), but I cannot find out how to do it in a new sheet with a new name that automatically gets generated with a unique filename (probably using the date).

Essentially, I want to copy my data spreadsheet (post-filter) into a new spreadsheet titled X mm-dd (where X is whatever I pick). I then want to delete several rows from it.

Ideally, the macro would do this (I will put a * next to things I can handle the code for, to save work):Filter Data *
Copy Data *
Create a New Spreadsheet named (Person's Name) mm-dd.xls
Paste Data (values, formats, column widths) to the new spreadsheet *
Delete Several Columns from the new spreadsheet *
Rename the sheet it's been pasted to
Re-filter data (new filter) *
Copy Data *
Paste Data (values, formats, column widths) to the same spreadsheet, only Sheet 2 *
Set the header of the spreadsheet with (Person's Name) and the date
Save the new spreadsheet

There will be as few as 1 sheet (in which case I would only want one worksheet in the new excel file), or as many as 4 sheets. I don't need a fancy way to do this, as it will only be done once a week, and I can just make the various cases required to do it even if it isn't pretty, but I can't figure out how to manipulate other files that haven't been created yet...

View 9 Replies View Related

Excel 2003 :: Put Picture Into A Cell And Get Picture Name From Another Cell

Mar 23, 2014

I want to paste/show a photo in a particular cell (D2) on a worksheet (called PP). I wish to delete any photo that may already be there in D2.

The picture's name (e.g. J-145.jpg) will be found in another sheet (called MP) in cell H1.

My pictures are stored in a folder (lets call it c:pictures) and the one I want has the same name (J-145.jpg).

I've tried many macros but none work.

View 14 Replies View Related

How To Separate Row Data From One Workbook Into Separate Workbooks Based On Cell Data

Apr 23, 2014

I need to separate row data from one workbook into separate workbooks based on cell data. Currently I filter the data, copy and paste it to a new workbook and save it. It's a tedious process and was hoping to find a way to automate it. I have attached a sample file. In this instance, I would like a separate workbook for the filtered data in Column 1 and then all the row data gets copied to new workbook. So all of Pennsylvania data would get copied to new workbook, then all of the Michigan data gets copied to a new workbook. I have also attached an example of the end result that I need.

View 9 Replies View Related

If True Show Picture 1 Else Show Picture 2

Dec 6, 2007

i m working on a mechanical project , I need to do some modifications to my XLS file that i aint familair with.

http://aycu36.webshots.com/image/348...0572870_rs.jpg

View 10 Replies View Related

Dropdown Lists Data Went Selected Won't Show In Next Dropdown Only Remaining Data

Mar 11, 2013

I am trying to pull data from more than one drop down but don't the same data to show if already use, example as follow:

First drop down Contains:- Pants
Shirts
Hats
Shoes
Dresses

if I chose Hats it should not show up in the second drop down

second drop down Contains:- Pants
Shirts
Shoes
Dresses
Is this done in data validation or combo Box? if so how?

View 2 Replies View Related

Picture In A Picture

Mar 27, 2007

I have several pictures on a graph sheet (i.e. imported cliparts) which I am using as a key to describe outcomes. I also have a blank picture box which I want to show each of the key pictures depending on a certain value in a cell on another sheet.

In Picture1 i want: fx = If(sheet1!A1 = "Red",Picture2,Picture3)

View 9 Replies View Related

Can You VLOOKUP A Picture

Jan 19, 2007

If I had a series of pictures in a worksheet, how could I give them a value so I could use the vlookup function?

View 14 Replies View Related

Un-shrinking Picture

Dec 4, 2008

Is it possible after inserting a picture in Excel and then shrinking it to the cell size un-shrink it to the original size by clicking the picture or placing cursor on the cell?

View 4 Replies View Related

Picture Won't Delete

Jan 2, 2009

I am working with a spreadsheet created by a predecessor and there is a picture at the top of one of the worksheets. When I select the picture and hit Delete, it seems to work, but the picture is still there. When I move it around the worksheet and resize it, a copy with the same name ("Picture 47") remains in the spot I moved it from. When I delete the resized/moved picture, it deletes, but the picture still remains in the original spot.

When I record a macro and select the picture and hit delete - or even when I move the picture and resize it - the recorded macro is blank.

All of the pictures seem to be named "Picture 47"

View 6 Replies View Related

Picture On Mouse Over

Jan 26, 2009

Is there a way to have a picture set to a cell so when you put your mouse on it it will popup like the comments do.

View 2 Replies View Related

Add A Box To Insert Picture?

May 12, 2014

how i can add a box on my sheet when i click on it to open the insert picture (or open picture). I need this for my recipes. I try the Image (Image ActiveX Control) but i do not now how to make it work. Also i try to insert picture each time but it takes me time to move it and re-size it every time. I need a faster way to add my pictures fast and in the same position every time.

View 5 Replies View Related

Positioning A Picture

Jun 2, 2014

I've got the following code going :

[Code] .....

I can't get my With statement to work.

View 1 Replies View Related

Insert Picture

Sep 8, 2009

I'm trying to insert a bmp file- small picture into an excel file (sheet 4) in vba.

how do I select the picture and copy it into the excel file.

View 14 Replies View Related

Picture Macro ...

Oct 16, 2009

I copied this from another post and am having trouble getting it to work for me. I want to be able to run this macro, find a picture on my computer which could be located anywhere and then have it paste in specific cells.

Whenever I run this it lets me find the picture I want and when I select it I get error message that says "compile error" Syntax Error". It then does not put the picture on the sheet.

I tried to zip and attach the work sheet multiple times but keep getting error message and won't let me attach......"forum excel database has encountered a problem" ....

View 9 Replies View Related

Put A Picture Into A Formula

Sep 3, 2004

I would like to find out how to put a picture into a formula so that when: example if A1 equals a certain number then a picture will pop up on the worksheet.

So in otherwords - a picture will automaticly pop up - so I need a formula to include the picture.

View 9 Replies View Related

Load Picture

Feb 25, 2007

I have made the next code

Filename = Application.GetOpenFilename("JPG Files(*.jpg),*.jpg,GIF files(*.gif),*.gif")
If Filename = False Then
Response = MsgBox("Er was geen file gekozen!", vbOKOnly & vbCritical, "Er is iets fout gegaan")
Exit Sub
End If

Userform.Image1.Picture = LoadPicture(Filename)

Userform.Show
I can choose a picture and it will be vissible in the Userform.

The problem is it's not saved into the userform it self.
How can i make it so that when i choose a picture it's also the picture i see the next time i open the userform.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved