When I run my code (which opens Excel from Access) it does everything it is supposed to but I then get the above error but I do not get the error if I open the VBA window and then run the code. (The code is password protected, not sure if this is relevenat though).
The macro below is stored within worksheet "Data Lookup". When the value in B1 changes, the code is executed but fails when it comes to the paste function. I get a "Object doesn't support this property or method".
Also, it appears the copying is not occuring correctly. It is supposed to copy from the Data3 worksheet but, in fact, its copying from the Data Lookup worksheet. Does storing this macro within a worksheet prevent the macro from moving between sheets?
Sub Worksheet_Calculate() If Range("B1").Value = Range("N1").Value Then End Sheets("Data3").Select Cells(13, 6).Copy Sheets("Data Lookup").Select Cells(23, 11).Paste End Sub
I was using the following macro on Excel 2000, 2002 & 2003 for many years without a fuss. Recently, I upgraded to Excel 2007. When I run the macro now, I get the following error message:- Run-time error 445 Object doesn't support this action.
Sub test() With Application.FileSearch .NewSearch .LookIn = "C:Documents and SettingsDesktopCommercial Database" .SearchSubFolders = True .Filename = "*.*" .TextOrProperty = "BANK" .MatchAllWordForms = True .FileType = msoFileTypeAllFiles If .Execute() > 0 Then MsgBox "There were " & .FoundFiles.Count & _ " file(s) found." End If End With End Sub
Additional info:- The 1st line of my code which is With Application.FileSearch is highlighted in yellow when I run this macro.
While clicking a button in the excel, am getting a run-time error. Everybody's need is urgent even I understand boss. Anybody else who is in the same shoes as mine. Here goes the solution:
Not sure if I am having a brain fade or not but the following code gives an ‘Object doesn’t support this action’ error (at the ‘with..’ line) and I can’t figure out why.
Sub test() With Application.FileSearch .NewSearch .LookIn = "D:" .FileType = "*.*"
I'm getting a really weird error in that I can't reproduce it. It sometimes occurs when I open the document and sometimes not. HEre is the Private Sub Workbook_Open() Dim dic, Dn As Range, rng As Range
Set rng = Sheets("Moisture").Range("B2:B1000")
Set dic = CreateObject("Scripting.Dictionary") With dic For Each Dn In rng If Not .exists(Dn.Value) Then .Add Dn.Value, ""
End If Next Dn Set wksPayment = Sheet10 wksPayment.ListBox2.List = .keys End With End Sub
The line that hangs up is the wksPayment.Listbox2.List = .keys line. Any ideas or ways to test or further figure out what is causing the problem?
I'm trying to write some code to make an existing chart display the correct series of data. However, on the ".SeriesCollection..." lines, it gives me the error "Object does not support this property or method." I'm using a Bar-Line graph, if it makes any difference.
When I execute this, I got error run-time error 445, object does not support this action. I am using window vista, microsoft office 2007. How can i change the code to make it workable?
I'm trying to get the Find and FindNext methods to work. Column C contains serial numbers and there's a chance that a serial number might appear more than once in the column. What I'm trying to do is get Excel to find the first occurance of the serial number, find what row it's on and then see if this matches the variable 'CurRowNo' (defined earlier in the code). If it doesn't I want it to look at the other occurances of the serial number, find what row they're on and see again if it matches CurRowNo.
The variable 'EngCount is the number of occurances of the serial number (also worked out earlier in the code). I've got the code below, but I get the error 'Method Range of Object Global Failed' on the FindNext line. I have no idea what this error means or why it's happening.
I have the following code in Destination.xlsm that is intended to:
request the user to select a multi-cell range in a column of single-sheet Source.xlsm, in which some but not all cells contain "Y" (to indicate that this row of data relates to a National Account, versus a Territory Account)loop through the selected range, and whenever a cell contains "Y", copy the entire row and insert it in Destination.xlsm above a cell named "rngDest".
Code:
Sub Copy_NationalAccounts_Rows()
Const Message As String = "Select the entire range containing National Account Y flags, then press Enter or click OK." Const Title As String = "Copy National Accounts"
Dim rngSource As Range Dim rngDest As Range Dim r As Range Dim c As Integer Dim wbk As Workbook
If I use the following code to pass in a string variable and then attempt to find the string it never sees the text in line 2; or any line that contains (). The code is simply a test to try and figure out what i'm doing wrong. The actual goal is to search the entire sheet for text similar to that entered in by the user and then copy every row that contains similar text into another worksheet.
Sub CopyStuff() strVariable = "car" 'I have tried "*car*" also With Worksheets(1). Range("b1:b500") Set c = .Find(strVariable, LookIn:=xlValues) If Not c Is Nothing Then firstaddress = c.Address Do Set c = .FindNext(c) MsgBox (test) Loop While Not c Is Nothing And c.Address <> firstaddress test = c.Address End If End With End Sub
The following code below was very kindly created for me by someone approx 12 months ago and I have been using it without any problems at all.
The purpose of the code is to creates a new Menu/Title item named "Quality" on the main Excel menu bar at the top of Excel and place it between the "Windows" and "Help"
This new Quality menu then has further drop lists which i can add as suited.
Two days ago i started getting the following RunTime Error everytime i open Excel and i can not longer get the new menu "Quality" to show on my Excel menu bar.
I have a while loop in which I'm updated information in 2 separate worksheets. I'm using the With-block statements separately to update each, but after the 30th iteration (and it's always on the 30th), the VBA code halts and get the "method 'value' of object 'range' failed" error message pointing to a line with the code as follows:
With Sheet1 .Cells(lngRow, 9).Value = intMonths End With
where "intMonths" is an integer variable which I'm populated properly, and "lngRow" a long variable. When I debug both variables have proper data in them, and I have no idea why this is bombing.
How do I add multiple worksheets at once after opening a new workbook? I was able to go to Insert>Workbook but it only adds one sheet at a time. I I need to add 50 woorksheets, I don't want to really click 50 times.
Insert a new worksheet To add a single worksheet, click Worksheet on the Insert menu. To add multiple worksheets, hold down SHIFT, and then click the number of worksheet tabs you want to add in the open workbook. Then click Worksheet on the Insert menu.
When I hold down the shift button and enter 50 i get the "%" and ) sign entered on the open workbook and then I try to click worksheet from the insert tab and it is greyed out.
columnA contains account numbers sorted in ascending order i need to use the union method to select all rows where the account number changes so that later i can insert rows between different account numbers in one action. i tried to use the following code but an error occurs stating 424 object required ....
I'm currently working on a fairly complex VBA project in Excel 2007. Basically though, I'm downloading information from a site, massaging it, creating a lot of graphs, saving them locally, deleting the chart from excel. I then save a copy of the workbook to a local file, clear the Spreadsheet, and then Do the same for information from another site.
When I had all of the code in one Module and ran it as a macro it ran flawlessly.
Now i've put the information into a Class. And am pretty much running the same process via a UserForm.
The problem I have though is that at any point after I execute the (and please assume that all variables have been declared, because they have)
I need some help with this error. I have some VBA code in Outlook that runs whenever a task reminder goes off. The code is supposed to open a workbook, send email based on the info in the workbook, then close the workbook and quit excel.
The task reminders are set to go off every two hours. Sometimes this will work fine for days and then randomly (as far as I can tell) I get the error: "Method Open of Object Workbooks failed". If I press Debug and then Run without changing anything at all, it works fine.
I am using Outlook 2007 and Excel 2007. The workbook is a shared workbook on a network drive.
I can post code if needed, but will have to go to that computer.
Why do I occasionally get this error when the workbook definitely exists and has the same name and path?
What does entering debug mode do that then allows the macro to run without error?
Sub a() z = 4 y = 7 sWork. Range(Cells(1 + nRow(z), 4), Cells(1 + nRow(z), 12)).Replace y, 0 lookat:=xlPart, searchorder:=xlByRows, MatchCase:=False End Sub
but when I include it in my main code
sWork.[A1:L9] = 123456789 For z = 1 To 81 y = [A1].Offset(nRow(z), nCol(z)) If y > 0 Then sWork.Cells(1 + nRow(z), 1).Replace y, 0, lookat:=xlPart,searchorder:=xlByRows, MatchCase:=False, matchbyte:=False sWork.Cells(1 + nCol(z), 2).Replace y, 0, lookat:=xlPart, searchorder:=xlByRows, MatchCase:=False, matchbyte:=False sWork.Cells(1 + nBox(z), 3).Replace y, 0, lookat:=xlPart, searchorder:=xlByRows, MatchCase:=False, matchbyte:=False sWork.[A1].Offset(nRow(z), nCol(z) + 3).Value = 0 sWork.Range(Cells(1 + nRow(z), 4), Cells(1 + nRow(z), 12)).Replace y, 0, lookat:=xlPart, searchorder:=xlByRows, MatchCase:=False sWork.Range(Cells(1, 4 + nCol(z)), Cells(9, 4 + nCol(z))).Replace y, 0, lookat:=xlPart, searchorder:=xlByColumns, MatchCase:=False sWork.Range(Cells(1 + Int(nRow(z) / 3) * 3, 4 + Int(nCol(z) / 3) * 3), Cells(3 + Int(nRow(z) / 3) * 3, 6 + Int(nCol(z) / 3) * 3)).Replace y, 0, lookat:=xlPart, searchorder:=xlByRows, MatchCase:=False End If Next
I get a "Method 'Range' of object '_Worksheet' failed" error at line 9, when z = 4, y = 7, and nRow(z) is a UDF which = 0.
From the current open book, I'm opening a 2nd book, then copying all worksheets from the 2nd book that meet criteria, into 1st book, (in the same order), but am getting Method 'Copy' of object '_Worksheet' failed error. What am I doing wrong? How to OVERWRITE worksheets?We'll be running the same process with new data, so also need to overwrite worksheets in 1st book.
Sub Build_Branch_File() Dim FileName As String Dim Wkb As Workbook Dim Ws As Worksheet Dim WNum As String Dim Tnum As String Dim RegionNo As Integer Dim Original_Wb As Workbook
With Application . ScreenUpdating = False .EnableEvents = False .DisplayAlerts = False End With Set Original_Wb = ThisWorkbook .........................
I'm trying to accomplish the following: on "LogSheet" sheet, click on the DailyCloseButton and have various lists on the "lists" sheet automatically sorted before I save and end. The code below gives an error: "Method ' Range' of object '_Worksheet' failed". I have no idea why it failed.
Private Sub DailyCloseButton_Click() ' DailyClose and sort routine
item = InputBox("Please Select Row Number of Child to be Removed") myString1 = Range("$a" & item & ":$c" & item, "$e" & item & ":$j" & item).Select
I copied this code from a prior worksheet and the range was not split (i.e. just "$a" & item & ":$c" & item). When I try to make the range selection grab two separate areas, I get the above listed error. Do I not have the quotations right? I have tried them several different ways. Not sure what else to try.
If IsEmpty( Range("D67")) Then Range("D67").Value = Application.UserName ElseIf IsEmpty(Range("E67")) Then Range("E67").Value = Application.UserName Else: Range("F67").Value = Application.UserName End If
ActiveWorkbook.Route
End Sub
I am clicking on a an approve button which executes this code. But when I click the button the error reads: Run-Time error 1004, Method 'route'object'_workbook'failed.