Run-time Erro '445' : Object Doesn't Support This Action
While clicking a button in the excel, am getting a run-time error. Everybody's need is urgent even I understand boss. Anybody else who is in the same shoes as mine. Here goes the solution:
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
FileSearch Method In 2007, Run-time Error 445 Object Doesn't Support This Action
I was using the following macro on Excel 2000, 2002 & 2003 for many years without a fuss. Recently, I upgraded to Excel 2007. When I run the macro now, I get the following error message:- Run-time error 445 Object doesn't support this action. Sub test() With Application.FileSearch .NewSearch .LookIn = "C:Documents and SettingsDesktopCommercial Database" .SearchSubFolders = True .Filename = "*.*" .TextOrProperty = "BANK" .MatchAllWordForms = True .FileType = msoFileTypeAllFiles If .Execute() > 0 Then MsgBox "There were " & .FoundFiles.Count & _ " file(s) found." End If End With End Sub Additional info:- The 1st line of my code which is With Application.FileSearch is highlighted in yellow when I run this macro.
View Replies!
View Related
Run-time Error '1004' :: Method 'Range' Of Object'_Global' Failed
I am trying to create a macro in my personal macro book such that whenever any workbook is opened the calculation settings (tools, options, calculation tab) are set to semiautomatic and do not calculate before save. The macro works when I am opening Excel itself (Book1) but when I open an already saved file it gives me Run-time error '1004' Method 'Range' of object'_Global' failed From there I choose Debug, the VBE window comes up, and I hit F5 to continue the code without doing any actual debugging. Here is the code that I am using. This is in the Personal Macro book on the "This Workbook" section....
View Replies!
View Related
Run-time Error '1004' Method 'Range' Of Object '_Worksheet' Failed
I have an interesting error that only happens when there is one row of data in the worksheet (sheet2 or "Half Payout"). Rows 1 & 2 are headers, row 3 is when the data starts - if any. With either no rows of data or more than one the coding works just fine. Here is the exact error message I'm getting: Run-time error '1004': Method 'Range' of object '_Worksheet' failed. The following code is supposed to sort the rows of data when opened and then activate the first open cell below B2.
View Replies!
View Related
Run-time Error '1004': Methd 'Range' Of Object '_Global' Failed
I have constructed the following code to set the print area of worksheets that have been selected to print to the range referenced in a worksheet level named range "xPrintArea". This named range is set using the OFFSET function. The procedure also sets the left footer to be a copyright notice that is also contained in a cell referenced by a named range. Set oPrintArea = Range(sPrintAreaName) is generating the error "Methd 'Range' of object '_Global' failed". Note that the line Set oCopyrightNotice = Range("CopyrightNotice") does not generate this error. From what I've been able to determine from other research on this forum and others, I believe the problem is that I need to more fully qualify the object which Range(sPrintAreaName) is referencing. I've already tried to use Set oPrintArea = wkSht.Range(sPrintAreaName).................
View Replies!
View Related
Method 'Add' Of Object 'CommandBarControls' Failed (run-time Error '-2147467259')
i get this error on the line in bold Method Add' of object 'CommandBarControls' failed (run-time error '-2147467259'). im not sure why its giving that problem, but im not very fluent in custom toolbars. '//The following two procedures add a custom menu to the workbook programmatically//' '//and then delete it//' Public currentMonth As String Sub CreateMenu() Dim mybar As CommandBar Dim myControl As CommandBarControl Set mybar = Application.CommandBars.Add( Name:="CustomButtons", _ Position:=msoBarBottom, Temporary:=True) mybar.Visible = True Set myControl = mybar.Controls _ .Add(Type:=msoControlButton, ID:=1) With myControl...........................
View Replies!
View Related
Run Time Error 1004 - Method 'Range' Of 'Object'_Global' Failed
I am trying to build a macro which will format the columns of a spreadsheet - basically it inserts some columns, writes formulas and highlights them. Here is a code I have got so far... When I try to run this I get a run time error 1004 - Method 'Range' of 'Object'_Global' failed. The part of the code Range("N2:N").FormulaR1C1 = "=(RC[-7]/RC[-2])" is highlighted in the debugger. Can anyone tell me why this is happening, also it would be great if you could suggest better ways of writing this code - as I am new to vba programming and most of my macros are built using the recorder and then 'working' on them.
View Replies!
View Related
Run-time Error '1004' Method 'Add' Of Object ' Sheets' Failed Adding Multiple Sheets
I have been running a simulation for about 18 hours now and just received: Run-time error '1004': Method 'Add' of object ' Sheets' failed I have been creating new sheets, importing data, pulling some values from the data then deleting the respective sheet. I am using: ActiveWorkbook.Sheets.Add after:=Sheets(Sheets.Count) The sheet is actually being added to the workbook, seemingly before the error. I resume the code, and a new sheet is placed in the workbook and it errors again. The Debugger stops and highlights on the code above.The sheet count number was 10895 at the error, just as an indicator of how many times the simulation has performed successfully. I am hoping this is something I can fix without having to start over...
View Replies!
View Related
"Run-time Error '1004', Method ' Range' Of Object '_Global' Failed"
I keep getting this "Run-time error '1004', Method ' Range' of object '_Global' failed" Here is the code that has the problem: Option Explicit Dim i As Long Dim j As Long Dim lDup As Long Dim lRow As Long Dim NoDupes As Collection Dim rRng As Range Dim Rng1 As Range Dim Rng2 As Range Dim Rng3 As Range Dim Swap1 As Variant Dim Swap2 As Variant Dim wks As Worksheet Private Sub UserForm_Initialize() Call DefaultSet For lDup = 1 To 3 Call NonDuplicatesList(lDup) Next lDup End Sub..................... It does not even loop once though the original UserForm_Initialize For/Next loop.
View Replies!
View Related
Run-time Error '429' ActiveX Component Can't Create Object
I am trying to generate excel report output from access by click of a button. Part of the code is as follows: Dim lngColumn As Long Dim xlx As Object, xlw As Object, xlc As Object Dim DBS As DAO.Database Dim rst As DAO.Recordset Dim blnEXCEL As Boolean, blnHeaderRow As Boolean blnEXCEL = False 'If we do not want the first row we set Header to false blnHeaderRow = False 'Establish an EXCEL application object On Error Resume Next Set xlx = GetObject(, "Excel.Application") If Err.Number <> 0 Then Set xlx = CreateObject("Excel.Application") blnEXCEL = True End If Err.Clear I worked on development on a server and worked fine. However when I have moved the code and database to the desktop of mine I am having the following error in the line Set xlx = GetObject(, "Excel.Application") Run-time error '429' ActiveX component can't create object
View Replies!
View Related
Run-Time Error '1004' Cannot Open PivotTable Source File 'Consolidated Report'
I have a macro that takes the date from different excel sheets, consolidates the data and renders the pivot table and chart accordingly. It was working fine when the date range defined for the pivot table was static. Now I have made it dynamic since the data range changes each month depending on the number of days it has got. When I run the macro, it runs succesfully, generates the report and save & close the report, but after that I am getting this error. Errorneous
View Replies!
View Related
Copy/Paste Error Object Doesn't Support This Property Or Method
The macro below is stored within worksheet "Data Lookup". When the value in B1 changes, the code is executed but fails when it comes to the paste function. I get a "Object doesn't support this property or method". Also, it appears the copying is not occuring correctly. It is supposed to copy from the Data3 worksheet but, in fact, its copying from the Data Lookup worksheet. Does storing this macro within a worksheet prevent the macro from moving between sheets? Sub Worksheet_Calculate() If Range("B1").Value = Range("N1").Value Then End Sheets("Data3").Select Cells(13, 6).Copy Sheets("Data Lookup").Select Cells(23, 11).Paste End Sub
View Replies!
View Related
Run-Time Error '424': Object Required
I have an Excel workbook that I have built in user-level security to log into. If login is successful I have code like this: If 'successful conditions Goto Success 'more code here that doesn't matter Success: 'verfies that it is a new project lgCreateProject = MsgBox("Would you like to create a new project?", vbYesNo) 'opens a userform if new project If lgCreateProject = vbYes Then frmQuoteInfo.Show Unload Me End Sub If the user signs on successfully and is not starting a new project then they get the error noted in the title of my thread.
View Replies!
View Related
Run-time Error '424': Object Required...
Then the change event in the ComboBox of TB5 stopped working with the above error message. Here's the Private Sub TB5_Change() 'Loads TB6 thru TB16 from TB5's RowSource i = 0 If Not TB5.ListIndex < 0 Then For i = 1 To 12 If Not i = 1 Then Me.Controls("TB" & i + 4).Text = TB5.List(TB5.ListIndex, i - 1) Next i End If End Sub The segment that is erroriung out is: Me.Controls("TB" & i + 4).Text = TB5.List(TB5.ListIndex, i - 1) The first time it errored debug said there was a type mismatch. That only lasted about 15 min before it changed error message to the one in the title. Debug highlighted this same code segment for both. TB5's original RowSource is "FoodList_2" which is 12 colums wide and variable number of rows. After picking the item from the first column this code fills in the rest of the data for the chosen row. I'm not sure how wide the rowsource is with the find code.
View Replies!
View Related
Mail Merge Error (Method 'Range' Of Object '_Global' Failed)
i'm tring to reuse this code which creates a label on excel. The data used to create the labels is on the "Data" sheet and the labels are generated on the "Label" sheet. The problem is the first time i run it it generates the labels, then whenever i try again it gives me the following error; Method 'Range' of object '_Global' failed. Each row on the "Data" sheet repreents a label.
View Replies!
View Related
Error 1004 Method 'Range' Of Object '_Worksheet' Failed
I have a cet of CommandButtons on sheet 1. The code for these buttons is in the code section of the sheet. A named range is referenced in this code. This named range is on sheet 2. Every time I try to reference this or any named range (from any other sheet), I get this "Run-time error '1004': Method 'Range' of object '_Worksheet' failed" The last time I had this error I was able to fix it by moving the code to Module1. I tried that here, but it did not work (I can't figure out how to call it from the sheet). CommandButton. Here is the code from the sheet for one of the buttons: Private Sub TBEnterUp_Click() iLast = Range("WBDate_DayLast").Value '<<<<<<< iItem = TBEnter.Value If iItem = iLast Then TBEnterUp.Visible = False Exit Sub End If TBEnter.Value = iItem + 1 If iItem > 0 Then TBEnterDown.Visible = True End Sub It is a simple number advancer. It is working in the UserForm I took it from. I have included a sample file of the problem. Feel free to look at it and borrow anything in it that you might like.
View Replies!
View Related
Run-time Error '91' When 'On Error Goto' And Cells.find
I have written a Excel (2003) that searches a worksheet for a string in any cell. If the string is not found, it uses the 'On Error GoTo' command to jump to a given label. It works fine on the first string not found. When it searches for the next non-existent string, it fails with: 'Run-time error '91': Object variable or With block variable not set' Do I have to clear a buffer after each cells.find search? My
View Replies!
View Related
Method 'Range' Of Object '_Worksheet' Failed Error
I start in my "Action Plan for For Single Market" worksheet and if I click on the Command Button I then want to read in a couple of variables, and jump to a second worksheet (called "Market Action Plans") where I then want to copy a range, and then paste it in another area in that same sheet. I thought I had worked out what to do, but when I execute I get a "run-time error 1004" when the macro gets to the "Range("Updated_Results").Copy" line. Excel describes the error as "Method 'Range' of object '_Worksheet' failed'" - which might as well be a foreign language as far as I am concerned! Private Sub CommandButton2_Click() Current_Market_Row = Range("Current_Market_Row") First_Col_Action_Desc = Range("First_Col_Action_Desc") Sheets("Market Action Plans").Select Range("Updated_Results").Copy Cells(Current_Market_Row, First_Col_Action_Desc).Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False Sheets("Action Plan for Single Market").Select End Sub I am an occasional macro-creator and every now and again, I come across this type of problem where I can't get variables to be reconized, etc. I think it's because I don't understand enough about Private versus Public, and how to declare variables.
View Replies!
View Related
Error Method 'sheets' Of Object '_global' Failed
The following bit of code has been working fine but has now started getting the following error; Method ' sheets'of object'_global' failed This kicks in on line 3. The worst thing is it will not let me get into the workbook at all Sub KillForm() 'Update Names on Sheets If Sheets("Daily Visits May").Range("e1") = "y" Then Goto 10 If Sheets("Daily Visits May").Range("d1") > 38837 Then Else Goto 10 Worksheets("Daily Visits Apr").Range("B5:C1500").Copy Worksheets("Daily Visits May").Select Range("B5").Select ActiveSheet.Paste
View Replies!
View Related
Network Printer 'ActivePrinter' Of Object'_Application' Failed
I am having trouble printing a page to both a local printer (which works fine) and a network printer (which does not work) Both printers are installed on the Computers. The error message I get when I try to run the macro is Run-Time ERror '1004': 'ActivePrinter' of object'_Application' failed. The codes that I have used are Application.ActivePrinter = _ "\SAUWTPFS01.sopac.pilkington.netDespatch Toughend & Batch reports (L164) on Ne05:" and Application.ActivePrinter = _ " \sauwtpfs01pauwtp0305 on Ne05:" and Application.ActivePrinter = _ " \sauwtpfs01pauwtp0305" It works on the day I record the macro. As soon as the next day comes around I get the error message. When I click debug it is these lines that are highlighted in yellow. I have looked at this for several days on and off and I always get the same error.
View Replies!
View Related
Method 'range' Of Object 'worksheet' Fails
I'm trying to accomplish the following: on "LogSheet" sheet, click on the DailyCloseButton and have various lists on the "lists" sheet automatically sorted before I save and end. The code below gives an error: "Method ' Range' of object '_Worksheet' failed". I have no idea why it failed. Private Sub DailyCloseButton_Click() ' DailyClose and sort routine 'Sort lists Sheets("Lists").Activate Range("Products").Select Range("Products").Sort Key1:=Range("Products").Cells(2, 1), _ Order1:=xlAscending, Header:=xlYes, OrderCustom:=1, MatchCase:=False, _ Orientation:=xlTopToBottom, DataOption1:=xlSortNormal.............
View Replies!
View Related
Method 'Add' Of Object 'CommandBarControls' Failed
The following code below was very kindly created for me by someone approx 12 months ago and I have been using it without any problems at all. The purpose of the code is to creates a new Menu/Title item named "Quality" on the main Excel menu bar at the top of Excel and place it between the "Windows" and "Help" This new Quality menu then has further drop lists which i can add as suited. Two days ago i started getting the following RunTime Error everytime i open Excel and i can not longer get the new menu "Quality" to show on my Excel menu bar. run-time error '2147467259 (80004005)': Method 'Add' of object 'CommandBarControls' failed ........
View Replies!
View Related
Method 'copy' Of Object '_worksheet' Failed
From the current open book, I'm opening a 2nd book, then copying all worksheets from the 2nd book that meet criteria, into 1st book, (in the same order), but am getting Method 'Copy' of object '_Worksheet' failed error. What am I doing wrong? How to OVERWRITE worksheets?We'll be running the same process with new data, so also need to overwrite worksheets in 1st book. Sub Build_Branch_File() Dim FileName As String Dim Wkb As Workbook Dim Ws As Worksheet Dim WNum As String Dim Tnum As String Dim RegionNo As Integer Dim Original_Wb As Workbook With Application . ScreenUpdating = False .EnableEvents = False .DisplayAlerts = False End With Set Original_Wb = ThisWorkbook .........................
View Replies!
View Related
Method 'location' Of Object '_Chart' Failed
I'm currently working on a fairly complex VBA project in Excel 2007. Basically though, I'm downloading information from a site, massaging it, creating a lot of graphs, saving them locally, deleting the chart from excel. I then save a copy of the workbook to a local file, clear the Spreadsheet, and then Do the same for information from another site. When I had all of the code in one Module and ran it as a macro it ran flawlessly. Now i've put the information into a Class. And am pretty much running the same process via a UserForm. The problem I have though is that at any point after I execute the (and please assume that all variables have been declared, because they have)
View Replies!
View Related
Method 'intersect' Of Object '_global' Failed
item = InputBox("Please Select Row Number of Child to be Removed") myString1 = Range("$a" & item & ":$c" & item, "$e" & item & ":$j" & item).Select I copied this code from a prior worksheet and the range was not split (i.e. just "$a" & item & ":$c" & item). When I try to make the range selection grab two separate areas, I get the above listed error. Do I not have the quotations right? I have tried them several different ways. Not sure what else to try.
View Replies!
View Related
Method 'Range' Of Object 'Global' Failed
I have a button on my spreadsheet which activates some code, it has worked perfectly for over a year but now for some reason I cannot get it to work. When I click on the button now I get the message: Run-time error '1004' Method ' Range' of object '_Global' failed. the file is far too large to attach here but here is the relevant ...
View Replies!
View Related
Both 'Private Sub Workbook_Open' And 'Auto Open' Run Sequentially
I have built a complex vba & multisheet spreadsheet that I am looking to secure against all the common attacks. So I have:A Workbook Open pw; VBA password (29 symbols/numbers/Caps/lower case) Very Hidden worksheets Hidden rows/columns Restricted scroll areas Workbook protection Code that auto protects all sheets upon opening Registry referencing in Workbook Open with timed closure if not matched Now I am on the last leg of implementing protection against Application.EnableEvents = False; force enabling of Macros and hiding of toolbars, scrollbars etc... Phew. Soooo, in my research, I have learnt that if EnableEvents = False, Workbook_Open is essentially skipped and the security VBA routines are disabled. To get around, I have copied the entire contents of the Workbook_Open routine to a module under Auto_Open. The first line of both these scripts is: Application.EnableEvents = True. Works! So far so good. However, I have a Msgbox prompt in the scripts that displays twice. So in essence, Excel is running Workbook Open first, then Auto Open second. If I open another instance of Excel and run Application.EnableEvents = False first before opening my spreadsheet, I only get one message. So only the Auto Open script runs.
View Replies!
View Related
Method 'value' Of Object 'range' Failed
I have a while loop in which I'm updated information in 2 separate worksheets. I'm using the With-block statements separately to update each, but after the 30th iteration (and it's always on the 30th), the VBA code halts and get the "method 'value' of object 'range' failed" error message pointing to a line with the code as follows: With Sheet1 .Cells(lngRow, 9).Value = intMonths End With where "intMonths" is an integer variable which I'm populated properly, and "lngRow" a long variable. When I debug both variables have proper data in them, and I have no idea why this is bombing.
View Replies!
View Related
Error Message "run Time Error '424' Object Required"
For some reason my form won't open when the workbook is opened. I get an error message "run time error '424' object required" (which happens when I have Form1.show in the BOTH workbook_open event and the userform_initialize event (oops)). When I removed form1.show from the userform_initialize I don't get an error but I also get no form. I recall having this issue before but I can't recall how to fix it. Can I call the userform_initialize event from the workbook open event to get around this successfully and properly?
View Replies!
View Related
Application.FileSearch Error '445'
The following code works fine in Excel 2003 but returns the following error in Excel 2007: Run time error '445' Object does not support this action Sub List_Files() Dim lCount As Long Dim wbResults As Workbook Dim wbCodeBook As Workbook Set wbCodeBook = ThisWorkbook With Application.FileSearch .NewSearch .LookIn = "C:DepartmentsInventory"............
View Replies!
View Related
Using 'IF' With Conditional Format (change Cell Color Based On The 'P' Or 'F')
My cell has a 'P' or an 'F' plus some additional text. I'm trying to change cell color based on the 'P' or 'F' but I can't get it to recognize the letters. Samples of what I've tried: =IF(LEFT(L23,1)=P) =IF(MID(L23,1,1)=P) etc. I can 'FIND' the 'P' or 'F' but there may be a P or F else where in the cell so the color may come up incorrect. I'm trying to get it to just look at the first character in the cell. Can the 'IF' be used with CFs?
View Replies!
View Related
How To Restrict The Cell Data To Letters 'a' Through 'e' AND 'A' Through 'E'
I am trying to come up with an excel shee which can track the progress of a student on practice exams. This exam only has multiple choice questions, with answer choices A,B,C,D or E. What I am looking for 1) I want to restrict the cell data to A,B,C,D or E (both cases). Note that I am not looking for a drop down/combo box. It would take the user to use one or two mouse clicks to drop down the list, and I am not in favor of that. 2) I would like this validation/formula to be applied to all the cells in a particular column. 3) Nice-to-have. If the user enters a lower case letter, then I would like to convert to upper case.
View Replies!
View Related
Method 'Route Object'_workbook' Failed
Sub Approve() Calculate If IsEmpty( Range("D67")) Then Range("D67").Value = Application.UserName ElseIf IsEmpty(Range("E67")) Then Range("E67").Value = Application.UserName Else: Range("F67").Value = Application.UserName End If ActiveWorkbook.Route End Sub I am clicking on a an approve button which executes this code. But when I click the button the error reads: Run-Time error 1004, Method 'route'object'_workbook'failed.
View Replies!
View Related
Separating Code Creates: Run-time Error '424'
I've written some code that fires on a worksheet_change event. It worked fine for the initial bit of code I wrote, but then once I repeated it for several different ranges, I got an error stating COMPILE ERROR: PROCDEURE TOO LARGE. (This amount of code below works fine, it's only when I add the rest it becomes too large.) Private Sub Worksheet_Change(ByVal Target As Range) 'Unprotect Sheet ActiveSheet.Unprotect Password:="clemson" 'Freeze screen Application.ScreenUpdating = False 'Turn Off Auto Calc With Application .Calculation = xlManual .MaxChange = 0.001 End With ' Master Bath Shower Listello If Not Intersect(Target, Range("Listello1ShowerMasterBath")) Is Nothing Then If UCase(Target.Value) = "NONE" Then Range("Listello_1_Options_Shower_Master_Bath").EntireRow.Hidden = True: Range("Listello_2_Shower_Master_Bath").EntireRow.Hidden = True:..........
View Replies!
View Related
Sort Failure In Code: Run-time Error '1004'
This piece of code runs perfectly on its own but when called at the end of another code it fails and I haven't a clue why. The reference wsTmp is dim'd globally and defined in the main component where it is simply - worksheets("somename") Run-time error '1004': The sort reference is not valid. Make sure that it's within the data you want to sort, and the first Sort By box isn't the same or blank. Private Sub FinalSort() wsTmp.Cells.Sort Key1:=Range("D2"), Order1:=xlAscending, Key2:=Range("A2") _ , Order2:=xlAscending, Key3:=Range("K2"), Order3:=xlAscending, Header:= _ xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _ DataOption1:=xlSortNormal, DataOption2:=xlSortNormal, DataOption3:= _ xlSortNormal End Sub
View Replies!
View Related
Run-Time Error '1004' :: Hiding Blank Rows
I'm trying to run this macro and I keep getting the "Run-time error '1004' Application-defined or object-defined error" I am just trying to hide the rows that do not contain anything in them with this x = 2 Sheets("sheet2").select If Cells(x,1).value = "" Then Rows("x:x").select Selection.EntireRow.Hidden = True Else x = x +1 End if The line that is giving me a problem is "Rows("x:x").select". but when i change x to an actual number, it works. I cannot have a definitive number because where there is data will vary every time this is ran.
View Replies!
View Related
Run-time Error '5' Invalid Procedure Call (CommandBars)
I create and load a commandbar, prior to loading it I attempt to check if it exists, then delete it, and recreate. I dont understand why this seemed to work for months and now creates an error. It appears that every now and then the created commandbar is not created when I open a file. Thats when the error pops up. I can manually run the Create_Bar sub and it will be fine, for a while. Run-time error '5': Invalid procedure call or argument This section is in my personal.xls file in "ThisWorkBook" of personal.xls.
View Replies!
View Related
|
TRACKER
