See attached my workbook, I have a user form and when the OK button is pressed I need to get the data to write to the master sheet. Sheet1 behind.
Is there also a way I can re-populate all the data back to the userform using my search URN combo box?
Then the recorded can be altered and when update is pressed on the user form the record just updates on the master and not adds another record.
Waiting time sheet Basic.xlsm‎
I'm attempting another macro to copy the next years budgeted expenses from the LT Tracking tab to the Expense Tracking tab.
The result must be in the formula " ='LT Expenses'!D9 "
I have entered the following, however there is a syntax error on the last line: Sheet6.Cells(9, lcol).Resize(UBound(x, 1)) = x
Option Explicit
VB:
Private Sub Rectangle2_Click()
' NewExpenses Macro
' Transfers LT expenses to Expenses tracking sheet
[Code].....
How do I write my code to add a tab labeled "Reports".
This is the code the Macro Recorder gave me, but it does not work.
Sheets.Add After:=Sheets(Sheets.Count)
Sheets("Sheet3").Select
Sheets("Sheet3").Name = "Reports"
Sheets("SetUp").Select
The attached excel file arrivals page and departures page Serial number to compare current on the data up-to-date page, I want to copy.
up-to-date on the "F" column is copied to the page on which you need to print.
Trying to write a UDF Code for a User Form. The User puts in the data for the element it is trying to find the pressure in mm Hg for.
I want a Msg Box to appear when the desired temperature is less than the lower limit temp. and the desired temp is greater than the upper limit temp.
I figured out how to get the message box to appear, but I have not figured how to get the If statement to continue with the calculation if the desired temp is within range. When I press the command button to calculate, the message box appears whether the temp is in range or not.
My code is as follows:
Private Sub CommandButton1_Click()
Dim A As Double
Dim B As Double
Dim C As Double
Dim Pvapor As Double
[Code]...
i need a code that can get parameter like a date and put it in a cell in the same column but different rows .
View 8 Replies View RelatedI have following data, data_in and date_out. I need to auto cal these 2 variable different and give the output as duration in month.
x_INV EF1date_lndate_out205/10/195005/10/1950325/10/195025/10/1950415/11/195015/11/1950508/01/195029/10/1950618/10/195018/10/1950717/10/195017/10/1950817/10/195017/10/1950915/10/195020/12/19501013/12/195013/12/1950 Excel tables to the web >> Excel Jeanie HTML 4
And give the result in colume X as following :-
x_INV X1stk_dur20304051060708092 Excel tables to the web >> Excel Jeanie HTML 4
I use my workbook to track sales data from one store to the next. I use my workbooks to compare data from year to year. Each year's data is displayed on a separate worksheet. '2013' has 2013's data, '2014' has 2014's. On the 2014 sheet, I have a Prior Year's Sales that pulls data from the previous year's spreadsheet using a formula which I just drag down each day I enter sales. I would like to automate this process and have the VBA code check for today's date and automatically pull the previous year's sales data from the '2013' sheet and put it in the appropriate cell on the '2014' worksheet. I hope I have explained this well enough to understand. I've included a link to my workbook for reference.
I had to use dropbox since I can't post a file over 1 MB. The file size is around 1.25 MB.
how to write a macro, which in turn write some VBA code in a worksheet?
View 4 Replies View RelatedI have recently used a before_close event on this workbook to save a backup of the open file to another location on my system. This works fine but I was wondering if there was some more code I could add to only execute this event on a write access basis.
The file I use can be viewed by anyone on the network as read-only and only certain users with a password can edit/update with a write access password.
The backup event is use executes every time the document is closed be it read-only or write-access.
Ideally I would like to add some code to only execute this backup if the file is opened on a write-access basis.
When ever I update my external CSV file and hit refresh all data, I get #REF! Errors. The CSV file has a table that changes daily. Thus the "A" Column has a different number of rows depending on the day. The problem is that Monday the CSV file will contain 700 Rows, while on Friday it will have 200 Rows. I end up with a lot of #REF! Errors friday. How do I write the code so that (A561 for example) does not change regardless if it can reference the target cell or not? I even thought of making a macro that just copied the formula into all of the cells after each refresh, but there must be a better way.
Example code
=IF(A561>0,IF(Start!$H$2="Monday",'calculations-mon-sat'!O561,calculation!O561),"")
=IF(#REF!>0,IF(Start!$H$2="Monday",'calculations-mon-sat'!O567,calculation!O567),"")
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that will move data by date from an (Entry) sheet to a (Historical) sheet. I want to enter a date in B3 on the (Entry) sheet. I then enter data into C3. What I would like to happen is when the data is entered into C3 the sheet goes and finds the same date that I entered in B3 and copies that data from C3 into Column E of the (Historical) sheet.
Test3.xlsm
how to write vba code using vlookup formula insert pic from picture folder
View 5 Replies View RelatedI am trying to write code which takes a reading off of a device every .005 seconds.
When I write the code as follows to take the reading every .004 seconds things work well.
PauseTime=5
Start = Timer
Oldtime=Timer
Do While Timer < Start + PauseTime
If Timer > Oldtime + .004 Then
Oldtime = Timer
Read(count) = Orbit.Networks(0).Modules(0).ReadCurrent
count = count + 1
End If
Loop
Finish = Timer
If however in the above code I only change .004 to .005 instead of taking readings every .005 seconds, I end up with readings roughly .015 seconds apart (approx)
Is there something unstable about the timer function to do this? Is there a different way to get a more stable result?
What this code keeps adding the data to the active sheet instead of the specified "Users" sheet:
[Code]......
How do I write a reference from a drop down list to another sheet and have
the formula do the if function so that it can do several arguments and return
"direct" if true and "indirect" if false.
I am trying to enter only the named ranges in the active worksheet into an Array.
The amount of named ranges can be from 4 to 7 per sheet.
I'm self taught at VB (This posts on this forum have taught me - thank you!) and have got the below code working on a Workbook - but not on a worksheet level.
ActiveSheet.Names.Count returns nothing, changing to ThisWorkBook.Names.Count returns the sum of all .Names in the workbook.
Sub aTest()
Dim sArray() As String
Dim sJoin As String
Dim y As Long
x = 1
y = ActiveSheet.Names.Count
z = ActiveSheet.Name
The sheet shown, Complaints, lists on each row information on a single complaint. This information extends from Col A to Col Y (though not that way here, the data actually begins in row 3). I want to highlight a Customer cell, say H227 for Customer A, then activate a macro that (1) recognizes the active customer (here A), searches the list, identifies each row where A is the customer and then writes each row into sheet "Event" beginning in row 4. I should then see the same A to Y cells of information, beginning in row 4, filled in sheet Event for the six customer A complaints. Note, the actual data in sheet Complaints involves 300 rows of data, and over 100 customers can be on the list, some up to 15 times. I know that I could do this by filtering the data, copying and pasting, but a simple macro would be quicker for the group of individuals involved. Note, I then use this information to populate a chart.
Excel 2010ABCDEFGHIJKLMNOPQRSTUVWXY226#INITIATION MonthINITIATION DATECRM Transaction IDSales OrderSalesSHIP PlantCUSTOMERCITYST/PROVPRODUCTProductLbs InvolvedPROBLEM Complaint
[Code]....
My vba code to copy row A110 of "Mod" worksheet to A9 in Table A of "Email Data" worksheet using some logic like - in Mod worksheet it searches for data i.e. "COUNT(DISTINCTM.TRANS_ID)" if found then it searches for "row selected" and it searches for data between the two . And then it pastes 34864 to A9 of Email Data worksheet . I have written code for this but it doesn't works.
Also i need vba code similarly for searching "CAP_ACTV_LN_SEQ" and then the values inside it to be pasted i.e. row 128 and row 129 in Mod worksheet to be pasted in table e in Email Data worksheet . Remember there are 2 rows but there can be any number of row anytime.
Also the vba code for "NULLPOINTEREXCEPTION'" is there in the sheet which is working fine. It can be used for your reference.
Button for Vba code to work is present in "Email Data" worksheet.
code for "COUNT(DISTINCTM.TRANS_ID)" given below also excel sheet attached : Worksheet .xlsm
i m looking for code that would copy the contents of cells A3:E100, but there might not always be 99 rows of data so could it check for rows of data below row 3 between A and E, and then copy G3:H4, all this data is in ' sheet 2' and could it paste all this data in 'sheet 3' but two columns away (to the right) of any existing data already pasted in row 3.
View 4 Replies View RelatedIs it possible to write vba code that will generate a text file with ALL changes that were made to an excel file. Ex. If Cell A17 = "Monday, June 4, 2012" and a user updates Cell A17 to "N/A", I would like to know what the value was before and after the udpate was made.
View 8 Replies View RelatedI have a file that I want a code to look for certain data and when found move the row to another sheet. The code needs to look at the active sheet because the name of the sheet will be different everytime I use it. It will also need to create another sheet named 'Online' that these rows are moved to.
The code will need to look for data that begins with either OAP, MCP, CPP, F4P, VAP, VWP, ITP and MEP. These will be followed by numbers i.e MCP123456. Once these are found I need the entire row removed to the created sheet.
The columns that these numbers will be in will vary on each file I use it on so it needs to look at the entire sheet rather than specific columns.
Also any cell that has data that begins with either MH and JD followed by 6 numbers that row needs deleting completely.
I have a userform containing upto 30 lines of data, each line being four fields.
The four fields are called txtMAWBNo#, cbDestination#, txtGW# and txtCBM# where # represents the line number so 1st line would be txtMAWBNo1, cbDestination1, txtGW1 and txtCBM1 to line 30 being txtMAWBNo30, cbDestination30, txtGW30 and txtCBM30.
The number of lines the users are allowed to enter is controlled by a variable called MAWBNoVar, which has a min. value of 1 and a max. value of 30.
The data needs to go to the next available line in the sheet, which can be determined by using xlup + 1.
Assuming the next available row is #244 and that MAWBNoVar has a value of 4 then what i need to do is this.
B244 = txtMAWBNo1
C244 = cbDestination1
D244 = txtGW1
E244 = txtCBM1
The idea is that I start out with a number of XML files, which I'm trying to manipulate to calculate descriptives and make graphs of in Excel.
So I've made a large "script" in VBA to accomplish these goals, which works, but I'm trying to optimize the code step by step.The overall process that I want to achieve, consists of :
1) Open the XML in Excel as an XML Table
2) Use the filters in the top row of that XML Table to select the data that I want to use
3) The resulting selection consists of data in 6 columns of which I only wish to select column 2, 5 and 6
4) I only wish to select the data in the table of column 2, 5 and 6 (without the header and only the cells in the table) and copy
5) Last step is to paste this data in Sheet "Calculations"
The step I'm working on right now, is step 3-4. My current code is: [Code] ......
This does the job, but I'm trying to optimize it, since I'm handling tons of XML files and I'm performing this copy function a number of times per XML file.
This copies the data of all the columns in the table for the cases that meet the selected criteria, but I'd like to make an even stricter selection of only column 2, 5 and 6 to not waste space and processing power.
So I tried to select the data from the 3 columns and combine them with the Union function, to copy them as one array to the sheet Calculations.
Optimized a similar VBA code to: [Code] ........
But I'm having issues with getting the right selection method and when I run the macro, I get the error message that the Copy and Paste area aren't the same size.
I tried to alter my initial code to something in the line of : [Code] ..........
But I get error messages 1004 : Method 'Range' of Object '_Global' failed.
I've also tried [Code] ........
But this seems to select the whole column, including the header and tons of rows even after the table ended.
I have a workbook with 10 sheets.
Each sheets has data starting row 14 and column B with row 13 being column Headers.
I want to copy data from each sheet, having column headers suppose A, F & G in to a single sheet. The position of column headers I want to copy are different in each sheets
Means macro will go to sheet1 first, he will copy data from column headers A, F & G and paste in new sheet suppose main.
then macro will go to sheet2, he will copy all the data from column headerA, F & G and paste it in main sheet after the last used row and so on.
I need a macro code to add and rename sheets as per data given in column "A".
ie if column A has
SBC
DFG
UY
IKJ
4 new sheets to be created with name given above (Column A). PS:- the data given in column A will not be limited to 4 rows, it ll be > or < 4.
I have a file with multiple tabs of data...lot's of data (each tab has 80,000+ lines and 23 columns...3 are formulas, the rest is imported data). I've brought Excel to it's knees (i.e. crashes). Yes, I'm using 2007.
What I'm trying to do is extract 6 cells of data from every 10th line and write it out to a CSV file with two more pieces of information (same for each line).
What I was doing was creating a separate worksheet for each one to be extracted, parsing out the data, and then copying that data to yet another workbook that was then saved as a CSV.
First, in retrospect, that was a waste of time. Second, the addition of the extra worksheets to do the parsing was crashing Excel due to the extreme size of the workbook.
What I'd like to do is use a macro to do all of this in one swell foop:
1) Prompt me for a file name (or I can put the desired name in a cell and read it from there if that simplifies the code)
2) Open a new text file with that name and ".csv" extension in the same folder as the original workbook
3) Write out the column headers: (Fix, Satellites, Lat, Lon, alt (ft), Date, utc_t, course)
4) Step through each row, looking at the text contents of column B (looks like 22:50:07.100)...if it ends in ".000" do the following:
4a) write "PPS,4," to the open text file
4b) write the cell contents from columns "V", "W", "J", "C", "B", and "L" to the text file in the exact format they appear in the text cell.
The output file should look like (very short example):
Fix,Satellites,Lat,Lon,alt (ft),Date,utc_t,course
PPS,4,30.543203,-86.323328,1419.04,2009/12/17,23:26:22.000,243.95
PPS,4,30.539272,-86.332765,1831.53,2009/12/17,23:26:34.000,242.61
PPS,4,30.535680,-86.340912,2281.16,2009/12/17,23:26:44.000,244.34
I have two userforms. The 1st is called “add a facility” and the second is called “Edit Facility”.
The first userform works pretty well. It places all the data in the right columns in the first empty row at the end of the table. Then the “sort” procedure places the “new” facility data in the right category. Everything is good there. Here's the code.
Private Sub CmndInput_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Facilities")
' find first empty row in database
iRow = ws. Cells(Rows.Count, 2).End(xlUp).Offset(1, 0).Row
'check for a Facility
If Trim(Me.TextFacility.Value) = "" Then
Me.TextFacility.SetFocus
MsgBox "Please enter a Facility"
Exit Sub
End If
'copy the data to the database
ws.Cells(iRow, 1).Value = Me.ListBox1.Value
ws.Cells(iRow, 5).Value = Me.TextFacility.Value
ws.Cells(iRow, 4).Value = Me.ListBox2.Value
ws.Cells(iRow, 6).Value = Me.TextType.Value
ws.Cells(iRow, 7).Value = Me.ListBox3.Value
ws.Cells(iRow, 12).Value = Me.TextConstneed.Value
ws.Cells(iRow, 16).Value = Me.TextPREAPP.Value
ws.Cells(iRow, 17).Value = Me.TextPreapsub.Value
ws.Cells(iRow, 3).Value = Me.TextDescription.Value
ws.Cells(iRow, 8).Value = Me.ListBox4.Value
ws.Cells(iRow, 9).Value = Me.ListBox5.Value
ws.Cells(iRow, 2).Value = Me.txtRefnum.Value
ws.Cells(iRow, 21).Value = Me.txtappdate.Value
ws.Cells(iRow, 24).Value = Me.ListBox6.Value
ws.Cells(iRow, 20).Value = Me.txtsubdate.Value
ws.Cells(iRow, 10).Value = Me.ListBox7.Value
' SORT Macro...
Data extract from sheet to sheet through column header values, i have set of data on sheet1,2..loop end of sheet
i want pull column data from multiple sheet column values into masterdata sheet depends upon column header values assigned in masterdata sheet.. my code works fine! but i want pull data if column header repeats more than one also
SO_NBR this is one heading in multiple sheets i cant pull col values not more than once under if SO_NBR repeats more than once.
[Code] .....
Find the attachment mentioned as expected result sheets is my requirement : HEADER_UPDATES_AIO_$.xls
I have a workbook ("CaTr") Sheet1 has data ranging ("B2:I41").
There are about 30 cells values (scattered) which needs to be copied in a workbook "CA_Log" in one single next available row .
As soon as the CaTr.sheet1 is filled I want the operator to click a button to trigger this event. Then the sheet1 in workbook CaTr should be saved as "G3" cell value.