I'm trying to make a pivot table that can compare sales based on the whatever month/year/salesman combination I give.
Ideally, I'll be comparing the sales data for 3 seperate months. Can I make a pivot table where I can make different filters apply to specific columns?
filter a pivot table that contains these 3 column fields: User 1, User 2, and User 3.
However, when I want to see the results for "John" in all those fields, I need to use one filter at a time. Is there any other way to see all results of the Pivot Table where "John" is a User, no matter if he is the 1, 2 or 3 user?
I have A3 and A4 as report filters in the pivot table. Is there any way can combine A3 and A4 into one cell. The new cell is something like drop-down list contains contents from A3 and A4. When picking up the from this drop-down, the corresponding data list will be shown (like the data in B3 and B4).
PivotTable_Filter_01.jpg
PivotTable_Filter_02.jpg
I am trying to arrange data (pay by week) for regions and sites within a region. In the first Report filter, I select the site, and the second report filter gives me all of the sites - not just those in that region.... How I can either arrange my data or change my pivot, so only the appropriate sites show under the region?
View 1 Replies View RelatedI can't know what fields will be filtered on so, so I need to extract all filters at run time.
I tried activeCell.PivotCell.PivotTable.ActiveFilters and this returns 0 although there are definitely filters available.
The workaround which I'm not is very good I'm considering is:
activecell.PivotTable.PageFields.Items collection which also behaves weird:
activecell.PivotTable.PageFields.Count returns 2 at the same time it has 3 elements:
activecell.PivotTable.Item(0);activecell.PivotTable.Item(1);activecell.PivotTable.Item(2)
I have a pair of Pivot Tables with matching Pie Charts that look at Project Costs and Schedules. When I filter one, I'd like the other to filter automatically.
I found these links and used the code that Jerry supplied but I am running into trouble.
pivot table question
Pivot Table- "Master" Report Filter
My filters (PivotField names) include
Contractor
RCEs District
Year
Month
When I select a contractor from PivotTable1 it does not change PivotTable2.
There is additional code in this workbook that Jerry recently wrote concerning drilldown formatting. It was initially created for a different report but now I use it in many of my other reports. I don't think it's causing the problem, I placed the new code above it (including in the module) and there is a line breaking it up from the new code.
As a side note, I may or may not need to change every filter. In this case I only want to change the contractor, but other times I may want to change other items.
Is there a way to loop through pivot table filters in VBA? In my case, I need to loop through the filter "Month" which contains January - December. For each of the month, I have to select and double click the total cases in each month.
So for every loop, for example,
Pivot 1
January
Count
Case 1
2
Case 2
1
Total
3
I need to open the drill down in B3 (this drill down will be opened in a new sheet, Sheet 1), copy the data and paste it in another sheet named "January Cases". Then the code will delete "Sheet 1" and proceed with the same with February till December. Is it possible to loop through pivot table filters?
I'd like to check whether all the filters in a pivot table is selected or not.
I am currently using the following code:-
Code:
Count = 0
For i = 1 To Worksheets("WW").PivotTables("PivotTable6").PivotFields("Country").PivotItems.Count
[Code]....
where flag is to flag whether all fields are selected in the pivot field or not.
The problem is the above code is very time consuming.
PIVOT TABLES -- Old data remains in pivot table filters
One more Pivot Table Question:
I have workbooks i have built and re-use with fresh data after verifying that the previous data has been cleared. Unfortunately there are times in the drop down filter, old data will remain, but is not at all in the data set. How to clear this out? I have ensured that before pasting in new data the old data has been cleared below the headers. I keep my headers so I don't need to re-do the Pivot Tables or adjust the Name / SUM capabilities in the VALUE FIELD SETTINGS.
Below is a simplified/truncated version of a data set that I am using in a pivot table:
Client Asset Return
1 Port1 10%
1 Port2 12%
1 Port3 11%
1 Port4 13%
1 Port5 10%
[Code] .....
I have created a pivot table and I'm using report filters for both Client and Asset (obviously there are a lot more data points). When I filter on Client 1 I would expect to only see Port 1 - Port 7 available in the Asset filter however, I see every asset in the data set. I need to pick and choose using the Select Multiple Items check box without having to scroll through every single asset. Is there a way to easily do this?
I have a pivot table whose 'output' (databodyrange?) is a nice, rectangular, 2D array. The table has many filters, each with many possible selections.
I'd like to write a function, whose parameters are the filter selections and the pivot table/data, that outputs the corresponding 2D array.
e.g. I'd call it with something like myFunction(args that determine the filter selections, myPivotTable)
Is this possible without calls to a macro? If so, how? If not, where should i look?
I'm trying to apply two filters to a Pivot Table field via VBA, but the syntax is beating me.
If I want to add both a xlTopCount and a xlValueIsGreaterThan, how do I do it? I need this because I want my Top n values to not include 0 values.
I had 2 pivot tables running on the same page (sheet 2). They both draw data from the same source (Sheet 1).
The only difference between the two is that pivottable1 has a filter for "home team", and pivottable2 has a filter for "awayteam".
I have managed to link the tables using VB so if i select "Man United" on pivottable1 - as the home team, pivottable2 also selects "Man United".
Now my problem is, that i don;t want to select the teams from the drop down check box list on the actual pivot table. I want to be able to do this by typing into a cell (say Cell A1 on sheet 3 for instance) and this controlling BOTH pivot tables.
I did have some lengthy code which worked for one pivot table, but it did not operate both and it over rode my code i had in place which works for manual filtering.
I have 2 pivot tables in a worksheet.
The names are "PivotTable1" and "Pivot Table2"
Cell H2 is the worksheet has a currency type, ex) EUR, CAD, GBP
Column 1 in each pivot table is "Currency Pair Sell/Buy"
Based on Cell H2, I want the pivot table filters in column 1 to show 'USD.currency' and 'currency.USD'
For example, if H2 = EUR, the pivot tables filters in column 1 should only show USD.EUR and EUR.USD.
Any template for this type of code, I can fill in the blanks with the relevant sheet names and other information that might be needed.
I'm trying to update a pivot table filter with a list on another worksheet. When I do a record and select two WBS for filter criteria I get the following:
Sub Macro5()
ActiveSheet.PivotTables("PivotTable1").PivotFields( _
"[Receiver WBS Reference].[Rec WBS Element].[LM Master]").VisibleItemsList = _
Array("")
[Code]...
If I entered values 700UY0S1MGL1 & 700UY0S1MGL2 in cells A1 and A2 of Sheet2 in the same workbook, how can I get this code to read that? If I extend the list to include additional items, how can I get the code to read it?
My next question is, in Excel I could enter a partial search (like 700UY0S1MG) in the filter drop down and I could filter on everything with this string. Using the macro it seems as though the full 12 char string needs to be qualified. How would I write a macro to handle this?
I have a pivot table in the first sheet which includes the field "Date" as a column label.
In the remaining sheets, except for one, there are pivot tables based on the same underlying dataset which also include the field "Date" as a column label.
I would like to adjust the selection (i.e., exclude some dates) from the column label in the first sheet and see if it is possible to make the same adjustments automatically to the pivot tables in the remaining sheets as well.
note that the field "Date" is used as a Column label, i.e., it is not a Report filter.
filter my pivot table using a cell value, rather than manually selecting from the dropdown.
The report filter title is Rnd H, and values start from 0 through to 2, at .1 intervals (so 0.1, 0.2, 0.3, 0.4 etc).
Rather than select "0.3" manually from the dropdown, can the pivot table do this if "0.3" was written in cell A1 for instance?
I have a pivot table with over 4000 entries and about 12 columns which i filter to get the info i want.
Unfortunately with so many rows and columns in the table, if i do a macro that gets each filter back to 'show all' its really slow.
Doing this manually using the "Show all" option in the filter takes a fraction of a second, so surely there must be a way to do this more quickly in VBA?
i can't understand why manually it takes no time at all, but automating it through recording a macro takes forever.
I am using pivot table for my customer aging which a sample is enclose. What I want to do is to Highlight the field " Customer Name " in colour if the the Field " Type of guarantee" is other than 0. Also a message of " Credit limit Exceeded" if the outstanding is more than the Credit limit.
View 2 Replies View RelatedI want to write a VBA code, so I can apply dates criterias to my pivot table. Say, I have 1-Dec-2007 in "C2" and 10-Dec-2007 in "C3". Now I want my pivot table to show me the dates between those two dates and the data that goes along with it. I have written this code, but it keep debugging:
Sub FilterDates()
Application. ScreenUpdating = False
Sheets("PnL").Select
Sheets("PnL").PivotTables("PivotTable3").PivotFields("Date") _
.PivotItems("01/01/1950").Visible = True 'to always have 1 populated
I have 3 pivot tables and with 3 filters each (they are all the same filters). I just want to change 1 of the filters for each of the pivot table (meaning the other 2 stay the same for all of the pivots). Is it possible to have a filter change automatically to match a filter in another pivot?
View 9 Replies View RelatedI'm Using Excel 2007 and would like to have some VBA to work with the following!
I have a simple pivot table (PivotTable1) in Sheet1 with three items in the Report Filter which has been named "ROUTE"
I have created a ComboBox in Sheet2 and have added the identical three items in via format control, cell link A1.
I would like to be able to use the combobox in sheet2 to operate the PivotTable Report Filter in Sheet1 as I would like to build a report whereas a user. Can only select the comboBox and does not see the pivotTable
Sounds simple but cannot get this to work no matter what I try.
I have looked at the below Hide/Show Pivot Table Field Items help web pages:
Hide/Show Pivot Table Field Items
Hide Pivot Table Fields Pivot Items by Criteria
I am trying to use the above, but with dates in the following format in each cell:
YYYYMM
200612
200701
200702
200703
200704
200705
200706
etc, etc
The below code is working for >200702 and removes all years/months prior to this entered value. Unfortunately the code does not work when a user enters <200706, instead the code goes through to the “NonValidCriteria” prompt.
Sub HideByCriteriaYYYYMM()
'Declare variables
'SEE: [url]
'SEE: [url]
Dim pt As PivotTable, pi As PivotItem
Dim lMonth As Long
Dim strCri As String, strCri1 As String, strCri2 As String
Dim bHide As Boolean
Dim xlCalc As XlCalculation
I have a pivot table which draws data automatically from a database
What I would like it for the customer field of the pivot table to only equal the customers which are present in another worksheet (Column A:A)
Is there a way to have separate Report Filters for each column in a pivot table?
I am trying to create a pivot table with 3 columns - 1: account code 2.current year (2011) 3. prior year (2010)
My Row Label is an account code field - each row is a different account code that sums up dollar amounts for the two financial years. The problem is that I need Columns 2 and 3 to have separate Report Filter criteria. So in Column 2 - I need the filter to weed out anything that is not 'Financial Year 2011'. In Column 3, I need the filter to weed out anything that is not 'Financial Year 2010'. Setting up a filter for one screws up the second, and vice versa.
Alternatively, how can I make two side-side-pivot tables that each have their own Report Filters?
I'm trying to use countifs on a filtered table to find the sum for a column based on 2 criteria.
I've used =SUMPRODUCT(SUBTOTAL(3,OFFSET(Sheet3!K7,ROW(Sheet3!K7:Sheet3!K7:K20000)-ROW(Sheet3!K7),0)),--(Sheet3!K7:Sheet3!K20000="Yes"))
for a single criteria which is great, but I also need it to look at column B.
In a non-filtered table it works as:
=COUNTIFS('Sheet3 '!$K:$K,"Yes",'Sheet3 '!$B:$B,B5)
Is there any way to do this?
I need to copy all the work sheets into one single work sheet (mastersheet). The source work sheets are having same column structure. The condition which i need to take care of is that after column 3 if at all there is any data till column 10 then in the destination mastersheet these should be copied in different rows with first two columns repeated. I need to do this using VBA macro.
View 9 Replies View RelatedIs it possible to create pivot table from another multiple pivot table.
Example: I have two diff pivot table "Income" and "Expense" as well
and I need to preapare new pivot table using with those two pivot table
There is pivot table for some reason the last column (YEAccts), which sums all the other columns values is exluding the 1st column for some reason. This "YEAccts" shows up fine in the pivot table "field list". And I followed the source for this and it's a table in a different tab that pulls data from an access query connection.
The name of the column that is summing up the rest of the columns is "YEAccts", but for the life of me I can't seem to find where this column is in the source table tab or even in the access query where the data is being pulled from.
How to find this "YEAccts" column? Also, why would it exclude not summing up the data in the first column?
Hi All, I have 2 pivot tables (PivotTable1 and PivotTable2) which both source from the same pool of date.
The difference between the two are that I have a different report filter criteria.
For one the heading is "day", for the other it is "night". Each colum of data has the same entry range (names of staff) and I want to be able to link the two tables so for instance -
If i select "Paul" from the (day) report filter on PivotTable1, I want the (night) report filter on PivotTable2 to also change to "Paul".
