AutoFilter Dates Within A Range
Dec 22, 2008How can I create a custom autofilter that will show me dates within 30 days of today in Excel 2003?
View 3 RepliesHow can I create a custom autofilter that will show me dates within 30 days of today in Excel 2003?
View 3 RepliesIm sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:
View 3 Replies View Related= LOOKUP(BH23,B1:AF1) this is looking for a date (a returned value from another set of equations) in a row of other dates. I want a macro to use this lookup, find the date and then select it as an auto filter, with criteria? here is the macro and the part where it says auto filter is the part where I want it to do the above lookup function
Sub Brooke()
ActiveWindow.ScrollWorkbookTabs Sheets:=-4
Sheets("Feb 03").Select
Selection.AutoFilter Field:=28, Criteria1:="BH"
Range("AD7:AD56").Select
Selection.Copy
Sheets("Brooke Hotel Running Order").Select
ActiveSheet.Paste
ActiveWindow.ScrollWorkbookTabs Position:=xlFirst
Sheets("Feb 03").Select
Range("AD62:AD68").Select
Application.CutCopyMode = False
Selection.Copy
Sheets("Brooke Hotel Running Order").Select
Range("B32").Select
ActiveSheet.Paste
ActiveWindow.ScrollWorkbookTabs Sheets:=-1
ActiveWindow.ScrollWorkbookTabs Sheets:=-1
Range("F23").Select
End Sub
In my 2003 workbook I have a number of sheets.
The 'Details' sheet has, among other data, the 'year' that the workbook refers to. From this, the beginning and end dates of each quarter appear in Cells F2:F10 in the 'Details' Sheet in the format dd/mm/yyyy.
In the 'Management' Sheet I have four buttons - Q1, Q2, Q3 and Q4. I want to attach code to apply a custom autofilter to each button so that clicking on one of the buttons will show only data from that quarter.
Using the macro recorder the following code is generated when applying a custom AutoFilter for Quarter One:
Sub QuarterOne
Selection.AutoFilter Field:=3, Criteria1:=">=01/01/2009", Operator:=xlAnd , Criteria2:="
I have this script it does exactly as i want it to do, filter a table of date using two selected date in D3 and D4. There is only one problem: when i choose the dates and run the script it changes them around it around.
e.g
cell D3 = 01/11/2006
cell D4 = 01/12/2006
so it should just show all of november (11)
but D3 will filter using 11/01/2006
and D4 will use 12/01/2006
Sub DateFilter()
Range("a8:r323").AutoFilter Field:=1, Criteria1:=">=" & Range("D3").Value, Operator:=xlAnd, _
Criteria2:="<=" & Range("D4").Value
End Sub
I recorded a macro to custom AutoFilter 2 columns in a worksheet. The information will be filtered between 2 dates; i.e. >= cell B2 and <= cell C2.
Both cells are formated to dd/mm/yy so i entered 1/12/06 (for 1st Dec) in cell B2 and 31/12/06 (for 31st Dec) in cell C2.
When i enter these 2 dates, click the button to run the macro and check the custom filter in the "Planning" worksheet it appears that the dates change to 12/01/06 and 21/12/06 and no records appear - although i know at least 65 rows should show.
If i then enter the dates in B2 and C2 as mm/dd/yy instead (but leave the date format of the cell as dd/mm/yy) the filter works perfectly; i.e. enter 12/01/06 and 12/31/06. However I plan to issue this spreadsheet out to other staff and as every other date in the spreadsheet is in the uk format dd/mm/yy i dont want to confuse them by insisting they use the mm/dd/yy format for this one function.
Has anyone ever encountered this before? and if so is there some way i can fix it?
Heres the code for the filter:
Sub Monthly_Stats()
Sheets("Planning").Select
Selection.AutoFilter Field:=5, Criteria1:=">=" & Sheets("Filtered Statistics").Range("B2").Value, Operator:=xlAnd _
, Criteria2:="<=" & Sheets("Filtered Statistics").Range("C2").Value, Operator:=xlAnd
Selection.AutoFilter Field:=82, Criteria1:="<>"
End Sub
I am encounting problems with an AutoFilter which is run in a macro after the user has selected dates from 2 Date Pickers (DTPicker) on a user form. The filter is applied to 1 column in a spreadsheet containing dates in the formay "dd/mm/yy" and is supposed to filter dates =2 and between a range of dates as selected. The resultant filter is blank, if the macro is debugged at this point the date format for the 1st criteria is found to have swopped the "dd" & "mm" around but the 2nd criteria is fine. eg. user selected 01/07/07 and 31/07/07 the resultant filter applied is 07/01/07 and 31/07/07. I have re-formatted dates to Long as per the article on this site @ http://www.ozgrid.com/VBA/autofilter-vba-dates.htm but still get the same result ???
Dim fDate, tDate As Date
Dim lfDate, ltDate As Long
fDate = frmReportMenu.dtpFromDate.Value
tDate = frmReportMenu.dtpToDate.Value
fDate = DateSerial(Year(fDate), Month(fDate), Day(fDate))
tDate = DateSerial(Year(tDate), Month(tDate), Day(tDate))
lfDate = fDate
ltDate = tDate
The problem is that when I add dates via macros (like from a userform to a selected cell) to a cell in autofiltered column, the autofilter doesn't recognize these values as "proper" dates. If I activate the formula bar and press Enter, then the autofilter identifies the date properly.
This is how the autofilter popup looks like after I have added a date via my macro: [URL] ....
The new date doesn't get categorized by year and month, instead it just shows as text on a separate line (circled in red) (huhtikuu = April)
I have earlier used Formula:
[Code] ....
How I could get the autofilter working right with the inputed values? I have tried adding the date via .Value and .Formula but neither one works.
I have a column of dates: 1 day per row: 01/01/10, 02/01/10, 03/01/10, etc in sequence, without gaps (European date format). The list can begin with a different start date depending on initial user input and is not always a Monday. I want the user to be able to autofilter so that it only shows dates that fall on a Monday.
Private Sub Worksheet_Activate()
Dim dDate As Date
Dim strDate As String
'disable autofilter if already enabled
With ActiveSheet
.AutoFilterMode = False
End With
'autofilter column a only, from a12, to filter Mondays
If IsDate( Range("a12")) Then
dDate = Range("a12")
strDate = Weekday(dDate)
Range("a12").AutoFilter
Range("a12").AutoFilter field:=1, Criteria1:=strDate
End If
End Sub
I am having trouble with the following macro,
[Code] .....
When I press F8 and step through the macro, the StartDate and EndDate both seem to populate correctly.
The macro seems to go through the motions but returns NO results, unlike the recorded macro.
Macro code to "Clear Filter".
Through VBA I am trying to filter for today's date and all dates 30 days in the future as well as all dates 30 days in the past.
I am currently using the code below, but it only show dates 30 days in the future. I cannot get it to populate cells that are either 30 days in the future or 30 days in the past.
Rows("4:4").Select
Selection.AutoFilter
ActiveSheet.Range("$A$4:$HQ$1000").AutoFilter Field:=4, Criteria1:="TBD"
ActiveSheet.Range("$A$4:$FQ$1000").AutoFilter Field:=12, Criteria1:= _
">=" & Date, Operator:=xlAnd, Criteria2:="
I have a workbook with 2 sheets I want to make an autofilter by two method :
- select case statement
- two dates
i wanted to create a macro that will autofilter my starting dates in I to the newest date entered. So ive recorded the macro: ....
View 9 Replies View RelatedIn column B is a list of dates, which are broken out by fiscal year (FY=7/1/ to 6/30). Column C is a list of dollar amounts. Cell F3 is the query ‘start date’
Cell F4 is today's date, which will be the formula: =today()
Using a date range of F3:F4, I'm trying to get each cell bordered in red to query the dates in column B for each FY; then display the matching sum from column C.
For illustrative purposes I went and manually determined what the values should be displaying as of 7/22. Here are a couple of examples of how I am trying to get the formula to work.
Example 1
FY’08:
Start date- 7/1
End date- 7/22
Searching cells B1:B94, cells B1:B13 fall within the start and end date parameters listed above. Sum of cells C1:C13 is $45,112.00, which should display in cell F6.
Example 2
FY’09:
Start date- 7/1
End date- 12/13
Searching cells B95:B222, cells B95:B149 fall within the start and end date parameters listed above. Sum of cells C95:C149 is $150,873.03, which F7 should display in cell F7. How to I type up this formula; its way more challenging that I first thought!
Here is my set up:
A2 to BF2 is a range of dates
A3 to BF3 are sales. Days without sales are 0.00
I want to pick a range of dates and find the number of days without sales between those dates. So, a formula that will look to a start date in A1 and an end date in B2, and then count the number of days that did not have sales between. Index/Match/Countif/Dateif I can't seem to make anything work.
In Cells B2:B100, i have dates that which have been entered using a combo box (the dates type is for e.g. 14th March 2010 format)
I want a formula that will count the cells that have dates between 1st April 2010 to 30th June 2010 in cells B2:B100
Also, I would like a formula that counts weekend dates between 1st April 2010 to 30th June 2010?
I have a masive table of dates (the date is created via a if formula)
what i need is so wheni enter 2 dates in 2 cells the system checks all the dates between the two specified and then returns the contents of them to a small area on the page.
Dates To Test 14/08/2026 19/08/2026
Results
14/08/2026
15/08/2026
16/08/2026
17/08/2026
18/08/2026
19/08/2026
Table..............
i dont mind using script or anything like that, i dont have much knowlage of it but do have coniderable understanding of other langages and usually figure it out :D
I've recorded an Excel macro to AutoFilter a selection and set criteria. This will work fine for this set of data but the number of rows will vary from month to month.
How can I modify this macro so that the range will automatically recognize changes in row length?
Code:
ActiveSheet.Range("$A$9:$L$7958").AutoFilter Field:=12, Criteria1:="TRV"
I'm wrinting a macro to copy specific data from a table. To do that I'm using a Autofilter and a list of criteria. The macros works fine for existent data, I'm mean, when the result of the filter is not null, but when the filter doesn't find a result, instead of clearing the filter range, it keeps the last valid. The result is a colapse and freeze the Excel. I'd like to know how can I reset or clear the filter range?
The code I'm using is:
Sub Filter_01()
'Definições preliminares
Dim rng As Range
Dim rng2 As Range
Dim ARLE
Dim filter_valid, filter_invalid As Variant
filter_valid = Array()
filter_invalid = Array()
'Criação do Arquivo de Destino
Caminho = "D:Documents and Settingscjcs.ABMeus documentosAutomaSIPPPlanilhas"
Nome_Arquivo = "Produtos_Tanques.xls"
Nome_Completo = Caminho & "" & Nome_Arquivo ...
I'm trying to make the criteria in an autofilter bit of code be the value of a cell in my spreadhseet. I have named the cell and would like to reference the named range rather than the cell address if possible.
Exp = Range("ExpenseGroup")
Sheets("Sheet2").Select
Selection.AutoFilter Field:=2, Criteria1:=Exp
Sheets("KPICharts").Select
Range("A1").Select
ExpenseGroup is my range which is located on sheet "cntrl" cell "G5"
When I run my code it referes to line 1 and says" Function call on lefthand side of assignment must return a Varient or Object".
I would like to know that is there any way of recording criteria when I filtered data.
For example; A1,A2,A3,A4,A5,A6,A7,A8,A9,A10 and A11
I have this data such as Data,1,2,3,4,5,6,7,8,9,10 (starting from Range A2). Now when I created auto filter as
VB:
ActiveSheet.Range("$A$2:$A$11" _
).AutoFilter Field:=1, Criteria1:=Array("2", "3", "4", "5"), Operator:=xlFilterValues
And this criteria can be changed by the user anytime. Now for some reason sometimes I trigger a code which works under Function key(F8) and it refresh some data from the database. Just before it gets the data, it will remove the filter such as :
VB:
ActiveSheet.Range("$A$1:$A$11" _
).AutoFilter Field:=1
My problem is after I run my code (under F8), I want to filter back with the same criteria. Is there anyway that i record my criteria in any cell whenever I filter?
I am writing a code that will filter based on a named range. My named range is "Region," and it is currently in column B, but may be in Column C, D, E, etc., based on additional columns that the user of this sheet may add in the future.
I first had code like this (before using a named range):
HTML Code:
Sub CopyRegions()
Dim LastRow As Long
With ActiveSheet
LastRow = ActiveSheet.Cells(.Rows.Count, "A").End(xlUp).Row
End With
Application.ScreenUpdating = False
Range("B8").Select
ActiveSheet.Range("$8:$" & LastRow).AutoFilter Field:=2, Criteria1:="Europe"
But then I named column B to "Region," and so I want to do the same thing as above, but I don't know what to put where it has the number "2" - "AutoFilter Field:=2" because it may or may not be the second column in the future.
I am looking for a code which can jump to a next cell from the activecell. I use the code
Activecell.offset[rowno][columnno]
This would take me to the next cell. However, this is a problem when the filter is on. I am not able to go to the next visible cell. Suppose if the row increase is 1, then cell selection goes to the hidden cell. I need to bypass the hidden cell and go to the next cell. Can anybody provide a code which does it? I tried searching the forum but could not get anything closer to this as I need something which works with offset and not cells.row.visible...etc.,
I am experiencing a problem with the autofilter function, but ONLY in Excel 2007. The "visual" filter works fine, but using the filtered range is a no go i.e selecting, copying and deleting an autofiltered range. The trouble is that the autofiltered range also includes all the (in this case) rows in between the target rows, which then means that the filter is more or less useless as a range selection tool.
Example code which was originally developed by Dave H.:
'Filter rows with autofilter
With ActiveSheet
.AutoFilterMode = False
With .Range("B5:N5")
.AutoFilter
.AutoFilter Field:=13, Criteria1:="Criteria"
End With
.AutoFilter.Range.Select
There are multiple duplicates of different part numbers in a column. When I autofilter the column, it shows 1 selection for each part number. I am trying to extract this selection fromm the autofilter dropdown box. I want to use it elsewhere in a dropdown box.
View 8 Replies View RelatedI have a simple three column range. I Autofilter the range based on one of the values in Column 1. I then want to grab the results into a range object.
I've been trying to use the Specialcells(xlcelltypevisible) route to no avail. It only gets one row when I should have many.
creating 2 fields in my userform that the user can input 2 dates that would serve as the range to set the autofilter. So user inputs field1 = 11/01/2011 and then field2 = 01/31/2012.
I was previously using a month range in my userform, populating from the known months and allowing the user to select a range. Since our data is now spanning a new year, this is no longer possible as I cannot make the combobox range go from 11 - 1 (November to January)
VBA Userform - select months & Months between - Code Included
I am using the following code to re-name filtered data in column 4 of my worksheet, but I am running into an issue when the Autofilter returns only one row of data. The End(xlDown) is selecting a range that extends to the last row of the worksheet (1,048,576).
Code:
rfiltered.Cells(1, 3).Select
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "Receivables"
Selection.Copy
Range(Selection, Selection.End(xlDown)).Select
ActiveSheet.Paste
How can I write the code so that in the event there is only one row of data, it selects just that row for the paste (and yes it would be redundant to paste over the same value) and then continues on? I would usually use a Cells(Rows.Count, x).End(xlUp).Row to find the last row of data, but I don't think that will work in Autofilter mode.
Code is attempting to autofilter any rows where text does not contain "0200" as indicated below, and delete all those rows. When reaching the line of code below the macro bombs and I get a "AutoFilter method of Range class failed" error message. Why that line is not being recognized.
Const strTOFIND As String = "0200"
Dim lngLastRow As Long
Dim rngToCheck As Range
'Application.ScreenUpdating = False
With Sheets("Platform")
[Code] ........
I have created a button to print an inventory list daily. The size of the list changes each day. The code I'm using works except I only want the Current Region to be defined as only the first 4 columns.
Private Sub CommandButton5_Click()
Sheets("Inventory").Select
Selection.AutoFilter Field:=4, Criteria1:="Inventory"
Set rng = Selection.CurrentRegion
ActiveSheet.PageSetup.PrintArea = rng.Address
ActiveSheet.PrintOut
End Sub