I need to look into a particular cell on a specific column.
if this cell does not contain a number, then I need to delete the entire row, not column.
and then of course do this for 30K+ rows.
if sheets("sheet1").cells(x,7) is not a number ( dont know how to write this )
then delete row and move up.
I have a macro that exports a row (or rows) to destination sheet ("Amber") based on criteria in Column K. Once exported I return to the source sheet ("Register") and the row that had the data that I wanted exported has exported the info but the row just sits where it was and appears to only 'clear the contents'. The macro I use is:
Sub Extract_FW_Rows()
Set ws = ActiveSheet
endrow = ws.Cells(65000, 1).End(xlUp).Row
For i = endrow To 1 Step -1
[Code] ......
I set up the macro on Excel 2002 in work as thats what we have....however when I input the same code into my home laptop working Excel 2007, all works perfectly i.e. it cuts the data to destination sheet, goes back to source sheet and the rows have moved up accordingly - I do realise that the action taken is a row removal i.e. I had 1000 rows, macro executes, I now have 999 rows in the source sheet.
What I would like is the same result in 2002 as I get in 2007.
formula to make data on same line.On converting data2 is above data 1. I insert a column on left . Need to use mouse right click shortcut delete manually shift cells left and then delete shift cells upto have both data on same line but should be in different cells and same sequence per attached ALSO TO REMOVE "/ -DASH HYPENS.
What I need is formula to move the data2 on same alignment and to delete the two empty rows between both data.
See annexed file for expected results.I have preference to have a formula much more.
How do I delete filtered rows without deleting the hidden rows in excel 2010?
View 8 Replies View RelatedI have a macro which is copying data from several worksheets into one consolidation worksheet. When determining where to paste the data into the consolidation sheet, the macro includes some logic to find the last row that has data in it (using e.Range("A65536").End(xlUp).Row, where "e" is a variable holding the name of the consolidation worksheet).
Once all the data is on the consolidation worksheet, I have a second worksheet with formulas that link to the consolidation sheet. The issue I have is that the first step of my consolidation macro deletes all data on the consolidation sheet to ensure that no data is double-counted). I am deleting the data with logic that simply deletes all rows from 3 to 65536. Once these rows are deleted, Excel returns a #REF! error on my second worksheet which is linking back to this data.
Rather than deleting the rows on the consolidation sheet, I have tried using the Clear and/or ClearContents commands instead. This works (i.e., my formulas no longer error out), but results in the consolidation macro running very slowly (~15 minutes, compared to
The first code hides everything just fine based on the date in A1. When I change it to the second code to delete instead of hide it is leaving a bunch of rows that the 1st code hides. Both codes have the same search criteria.
Code:
For Each cell In Range("B8:B5000") If cell.Value Range("A1").Value Then cell.EntireRow.Hidden = True
Next cell
Code:
For Each cell In Range("B8:B5000") If cell.Value Range("A1").Value Then cell.EntireRow.Delete
Next cell
I have the following codes to delete all blank rows in column A
Dim lastrow As Long
lastrow = Sheet1.Range("A" & Rows.Count).End(xlUp).Row
MsgBox lastrow
With Sheet1
For t = 1 To lastrow
If Cells(t, 1) = "" Then
Rows(t).Delete
End If
Next t
End With
End Sub
Although it is working , it is not deleting all the blank rows at once, I have to keep pressing on the macro button running the macro several times, until all blank rows are completely deleted.
I got a code to delete all rows in the sheet which contain the word "DETAILS" but I now want to delete all the rows that do not contain the word "DETAILS"
My code if needed is:
Sub Find_details()
Dim rng As Range
Dim what As String
what = "DETAILS"
Do
Set rng = ActiveSheet.UsedRange.Find(what)
If rng Is Nothing Then
Exit Do
Else
Rows(rng.Row).Delete
End If
Loop
End Sub
I have an month input in cells B2 (user can enter values from 1-5)
I then have a data table that has month 1,2,3,4,5 running across range G9:K9. the data is held in range G10:K19.
So if user types in 4 in B2, what should happen is that months 1,2,3 and 4 the data for these months should be cleared and data in month 5 moves forward into month 1.
So basically, anything left of the month entered is B2 should be cleared and replaced with anything right of the month in B2.
1
2
3
4
5
£11
£133
£29
£193
£100
[Code] ........
I have a worksheet in which I have sorted the data based in date and numbering (column I and E). I would like to create 2 macros for following actions:
1- all rows with the value "TOM" in column C will have to be deleted.
2- all rows with a value of 601 or 602 in column E, will have to be moved to the bottom of the sheet after the last row with data. The rows that have been moved will have to be sorted based in date (column I) and numbering (column E).
I've got an excel file with over 20,000 rows with Column A being having values of a "Vendor Number" while Column B has a "Vendor Name" Here is an example:
Vendor #Vendor Name
1001ABC Supply
1002Larry, Moe, Curly Inc
1003John Smith
1004Fred, Wilma, Barney LLC
I'd like it to find the rows where the Vendor Name has a comma present, and then put it in another sheet, or in another column like column C and D. If I can't get both the Vendor # and Vendor Name re-inserted someplace, that is OK. The Vendor Name is the big one.
I have 3 columns and 200 rows. The first column is for Name of product. 2nd column for number and 3rd for $value of number of products. Have 200 rows. Have done a sort and checked. 2 sets of rows are for the same product name. I want to know if it is possible to add up values in 2nd and 3rd column, 2 rows at a time , then 4th and 5th column and so forth, by some formula rather than doing it manually?
View 4 Replies View RelatedSay I have a method that iterates through a bunch of Sheets. I check the name of every sheet, if it starts with "Data", I need to make everything between A4 and AZ500 empty (either by clearing cells or deleting rows doesn't matter how, as long as the result is an empty sheet below A4).
View 2 Replies View RelatedI have an excel spreadsheet that contains about 1000 rows and about 25 columns. The file contains employee information, name, id, cost center, department, title, FTE...etc. Column E contains the cost center which is a 7 digit number (i.e. 8001234). Within the 1000 rows of data there somewhere to 70 cost centers. I would like to delete all rows where a cost center does not match a list of 13 cost centers. I'm thinking I need some kind of array where I type in the 13 cost centers in the code, but I'm unsure of the syntax within VBA.
Also, the second step of the code I'm looking for is to delete all columns except for Column B, E, J and L. Those, by the way are Name, Cost Center, Job Title and FTE.
I want to delete all rows in the column of the ActiveCell when the ActiveCell.value < 0.01. Could you tell me why the code below doesn't work? It deletes the right rows but keeps looping without stopping
Sub DeleteZeros()
Dim Col As Long
Dim StopRow As Long
Col = ActiveCell.Column
StopRow = Cells(Rows.Count, Col).End(xlUp).Row
Range("A1").Select
[Code] .........
I have a macro that deletes rows. For some reason, the macro bombs out when the selection seems to be too big. Why is that?
deleterow_min = Sheets("Sheet1").Cells(1, 6)
deleterow_max = Sheets("Sheet1").Cells(1, 7)
Rows(deleterow_min & ":" & deleterow_max).Select
Selection.Delete Shift:=xlUp
In a part of my code I have something that will delete all hidden rows, like:
For Z = 1 To TotalRows - 1
If Cells(TotalRows - Z, 1).EntireRow.Hidden Then
Cells(TotalRows - Z, 1).EntireRow.Delete
End If
Next Z
I've done it in reverse to be quicker, but it's still quite slow. Granted, I am deleting several thousand rows, but surely there's a quicker way? Thinking about it logically I would presume that (in general) selecting stuff first in Excel and then deleting them appears to be quicker, but I'm not sure how to pull that off.
Here's my problem. I have the following table:
View 5 Replies View RelatedI have a large list of coordinates that I pasted from a website, and in Excel it has an emty row between every coordinate. I have about 2,000 cordinates, so ~4,000 rows. Is there a way to delete every other row besides manually?
View 1 Replies View RelatedI am having trouble with the .SpecialCells(xlCellTypeBlanks)
What I need to do is for a macro to first go through a range ("G8:G50"), Add a 0 value to any blank cell.
Then I want the macro to delete the entire row for any of the cells that have a value of 0 in that range of "G8:G50"
I have created a worksheet (through an import into MS Excel 2007) which contains 287,281 rows. However, the data I need is located in rows: 4, 67, 130, ... (or n+63) rows.
View 10 Replies View RelatedI want to delete every second row, because I have data with 0.25m interval and I want 0.5m interval. Why I try the following it doesn't work?
View 2 Replies View RelatedLoop for Deleting Rows
Whats wrong with my code ?
I would like to delete rows that are based on these conditions: First ,Do a loop from row 2 to last available row. - Delete rows with same column(column B) that has the same value. However I want the last available row with the same ID to remain.
- Delete Rows with any values in found in other sheet column B. When the value taken from the first sheet(ABC) is compared to the column B in second sheet(DEF), if they are equal, the row will be deleted in the second sheet and the rows in first sheet will main. I had attached an simple example with the 2 sheets. The Result are shown in the example.
I need some VBA to delete rows that are under the value of 10 in column H and keep the rest, is there a way of doing this
View 7 Replies View RelatedIn my Excel 2003 worksheet I need a macro to search column B for duplicate entries. The data in column B is both numeric and string. If there are any duplicate entries, then I need the duplicate rows to be deleted.
View 4 Replies View RelatedI have data in the format below. I'm looking for a piece of code that will look down column B and if there are 30 rows in which all the values are zero then delete all rows from row 1 to the last row of those 30 rows.
Input_data AB106/01/2012 13:03:170206/01/2012 13:03:1816306/01/2012 13:03:1916406/01/2012 13:03:2016506/01/2012 13:03:2117606/01/2012 13:03:2224706/01/2012 13:03:2316806/01/2012 13:03:240906/01/2012 13:03:259.51006/01/2012 13:03:26191106/01/2012 13:03:27211206/01/2012 13:03:28161306/01/2012 13:03:2981406/01/2012 13:03:3001506/01/2012 13:03:31571606/01/2012 13:03:32801706/01/2012 13:03:331091806/01/2012 13:03:341331906/01/2012 13:03:35156
way to delete multiple rows in a large spreadsheet with automation Example:
84076 Cantor 10 Retail Tue Nov 08, 2011 160 REVISED Division 8 1600 Compulsion Done 84077 Cantor 10 Retail Thu Nov 17, 2011 160 CANCELLED Division 8 1600 Compulsion Done 84078 Cantor 10 Retail Thu Oct 13, 2011 88 Division 8 880 Compulsion Done
I would need to delete all 4 rows within the "Cancelled" Box, but in a spreadsheet of 12000 boxes of 4. so, probably a macro to find them all, and delete them would be the way to go.
I'm looking for a macro that will delete a row with a certain value (0.00) and the row below it.
View 9 Replies View RelatedIn my spreadsheet, column A can contain the same word over several rows. If column B is blank at any time - I want to delete all rows that have the same word in column A.
Apple 1
Orange 2
Apple
Peach 1
Peach 2
So in this example - I want to delete rows 1 and 3 that show the word Apple.
