I need to insert blank row/s between the missing dates. Let me explain in detail,
I have a start date in Cell B1 and end date in Cell D1. Need a macro to verify the date range in Col B with these start & end dates and insert blank row for missing date corresponding to employee names in Col A. This should be repeat till last used row of the sheet.
Attached sample (Before&After) workbook.
Insert Missing Date.xlsx
I need to insert blank row/s between the missing dates and fill the missing date & corresponding employees name. Let me explain in detail,
I have a start date in Cell E1 and end date in Cell G1. Need a macro to verify the date range in Col A with these start & end dates and insert blank row for missing date corresponding to employee names in Col B. This should be repeat till last used row of the sheet. Attached sample(Before&After) workbook.
Both missing date and respective names to be filled in the newly inserted rows.
I am trying to write a macro which will insert a blank row at the end of each year(A column) (Last cell i.e Dec 95 and so on).
I have attached the file for the same ....
I am trying to auto generate a calendar based on two drop down menus - Month and Year.
Once the month and year is selected I want to import all work orders onto the calendar based first on the "Labor Name" found in the list of work tab, then assign each work order for that labor name to the respective date on the calendar for the month.
August PM Schedule Demo.xlsx
I am trying to come up with a code that will copy column A entirely, and insert the copied cells into the first blank column. In the columns with information in them, there will always be text in the first cell, so that can be used as the test to find the first blank column, but I'm not sure how to get this done for my macro.
View 12 Replies View RelatedI have a worksheet that contains data arranged in fields from columns A to J. The relevant columns for the purposes of the macro are columns B (customer codes) and G (sales values). Column B may contain a single instance of a customer code, or multiple (over 50), depending on how active a customer has been. The worksheet always contains many different customer codes with varying numbers of rows for each customer, sorted by customer. What I'm trying to do is write a macro that will loop through the worksheet and insert a blank line immediately after a change in value of column B (customer code), and in this blank line, insert the customer code in column B (which comes from the cell immediately above), a sum formula for all values within a range that relate to that particular customer in column G, and an IF statement in column J that relates to the SUM formula. The loop concludes when there are no longer values in column B.
I have managed to insert blank lines on change in values in column B, but am not sure about the best approach for inserting the SUM formula or the IF statement in columns G and J respectively.
Attached is what I use as a Calendar Macro and it works great for single active cell use.
I have a column for 'Notes' and I can only use 1 cell per item so every time I have an update about a specific item I go the to notes section and put a date and leave few spaces then type in whatever the notes are. Currently I'm doing it manually and I tried to use my macro on the Notes column and what it does is to remove everything in the cell and replace it with whatever date I choose in the calendar.
find a way to use my current Calendar Macro to add a date in the cell instead replacing everything in the cell with a date.
I have a macro that runs in Sheet 1 and enters the word "Complete" in cell P of the active row. The same cell that requires the word "Complete" in Sheet 2 is in cell T of the active row. Is there a way to have the same shortcut that will identify which worksheet it is in and go to the appropriate cell?
Code:
Range("P" & ActiveCell.Row).Select
ActiveCell.FormulaR1C1 = "Completed"
ActiveCell.Offset(0, 1).Range("A1").Select
I'm trying to create a macro that takes data from one row and inserts it into a new row. Attached is a workbook with a before and after example of what I'm trying to do.
Each row has a security transaction that includes principal cash and interest. The data needs to be formatted so that each transaction has one row for principal and one row for interest.
Principal is identified by the tran code PAYDOWN in column C. Interest is identified by the tran code INT. However, the raw data generated includes both interest and principal under the tran code PAYDOWN.
There could be 100 or 1000 transactions generated based on the day.
I'd like to adapt my macro so that it would insert a blank row after it detects the the first 16 characters of text as "'Closing Balance"; or it could even detect "'Closing" as the first 8 characters if it would be simpler
The Data Begins in Row 5 of Column A
My Current Macro is as below which I have adapted from another one I used
It is not working since it is detecting for the exact text "'Closing Balance" whereas the data registry would write "'Closing Balance as at 31/10/2009" , of which the "as at dd/mm/yyyy" portion would change every time a report is exported, but the first part "'Closing Balance" or even just the word "'Closing" will always be the same.
I would like to have my macro code search column A (supplier numbers) and split the rows into groups of rows of 5 or less and then insert 3 blank rows between each group of rows. The split needs to start on a new supplier number and cannot split a supplier number into two different groups. Here is a sample:
Supplier
Invoice Date
GL Date
Invoice Amt
[Code].....
If the value of the adjacent cell in column A is blank, insert a blank row through Column B:J.
View 9 Replies View RelatedI would typically consider myself a decent Excel user, but I haven't been able to solve this one. Maybe it's just the lack of sleep now. I am attempting to combine 4 cells into one where the last cell contains a date. Below is the formula I am using:
=B3&" "&C3&" "&D3&" "&TEXT(E3,"m/d/yy")
It works when all of the cells have values, but the only problem I am having is that some of the dates (in column E) are blank. When this cell is blank the default date that displays is "1/0/00." If I add the typical, " " at the end it says the formula has errors. The need for the TEXT(E3,"m/d/yy") for the cells that contain dates is throwing me off.
a macro/code to accomplish the following:
I would like to insert a row if:
Difference in values in Column B are more than 2 .... OR ...Difference in values in Column C are more than 2
Specimen
Value 1
Value 2
[Code]....
In the above table, rows would be inserted after specimen A, B, D, and E.
I have to use several dozen pivot tables a day. I already use a couple of macros to do a lot of the tedious formatting, but if I could automate this it would save me a lot more time. I have been trying to both write a code and modify code written by the recorder but have not even come close to anything that works. What I want is to have a macro that searches through the column header for predefined names and if it comes across one of these names it will insert a specific formula, based on its name, in the first cell below the header. Then it will autofill to the last row and move on to searching for the next predefined header name. If that name is not found, it will move to the next predefined header name. One major problem is that the formula to insert under any specific header name is based on other columns in the table that aren't always in the same range. So, not only do I need it to search for columns to place a formula in, that formula has to search for the appropriate column to find the correct value to use in the calculation.
For example, one predefined column name would be Avg Price. The formula for that column would be (Sales/Qty Sold), but these 2 columns could be located anwhere in the table. How can I get it, once it has found a column that needs a formula, to locate the correct column/cell to get the correct value from the sales and Qty Sold columns?
I'm working on some code that's part of a userform. To illustrate what I need, I will give an example. A column letter, 'J' for example, is stored in colNum.Value taken from the userform. I need both a column inserted before column J, and data entered into that new column in row 2 (thus J2, which would now be blank).
View 4 Replies View RelatedWhere is that I have 2 sheets of data, sheet1 contains an ever expanding list of data and I'm trying to create a macro that deletes multiple rows of data from this sheet if the date held within column K is less than the date defined in sheet2.
View 4 Replies View RelatedI am on office 2010
I am new to VBA programming so i might be making a obvious mistake. I am trying to create a macro that will insert rows depending on a cell value. I also need this to be executed from a command button rather then to occur immediately after the cell value is entered. So as a example
Lets say
Cell A2 has a value 20
Cell A3 has a value 3
Cell A4 has a value 5
when this data is entered and then a Command button poressed there should be
20 rows beneath cell A2
3 rows beneath cell A3
5 rows beneath cell A4
a macro to insert rows based on certain cell values in column A.
I have uto 300 rows of data. Below is an example of column A.
R1
1
2
3
4
5
6
7
[Code]...
If (above the R) is an 8, I need to insert 2 rows above that R and directly below the 8.
If (above the R) is a 9, I need to insert 1 row above that R below, directly below the 9.
(Below the R there is always a minimum of 8 digits with the 9 and 10 being random).
I have excel 2007
I want to achieve is a procedure that inserts horizontal page breaks at certain parts of the sheet where there is a cell equal to 2. Here is the code I have so far.
Sub insert_pagebreak()
Dim printbreak_cell As Range
Dim j As Long
Dim i As Long
ActiveSheet.ResetAllPageBreaks
Set printbreak_cell = Range("AD1")
j = 1
For i = 1 To 100
If printbreak_cell.Value = 2 Then
Set ActiveSheet.HPageBreaks(j).Location = printbreak_cell
j = j + 1
End If
Set printbreak_cell = printbreak_cell.Offset(1, 0)
Next i
End Sub
Everything works until the cell value reaches a 2, and then once it goes into the If statement I get a 'Application-defined or object-defined error' at the below line.
Set ActiveSheet.HPageBreaks(j).Location = printbreak_cell.............
I need a macro that based on multiple cell dates determines if the person is qualified or not, and puts yes or no in column A... all of the dates are yearly.
View 5 Replies View RelatedI might be using something completely wrong here, but can anyone tell me if this code is possible or am I being very naive.
H4 and I4 are cells in which I want to enter dates, and then I want these dates to be used in a custom filter on another page.
Below is what my limited understanding of VB came up with.
Sub Date_Range()
Dim First As Date
Dim Last As Date
First = Range("H4").Value
Last = Range("I4").Value
Sheets("Graph Data").Select
Selection.AutoFilter Field:=1, Criteria1:=">=First", Operator:=xlAnd _
, Criteria2:="
I am looking for help. Sheet1 B1:1 has dates in each column in ascending order for one month. There are missing dates in between the days and they might look like this.
Example 1
7/1/20097/2/20097/6/20097/7/2009
Is there a code that will insert columns with the missing dates between the dates that already exist so that example 1 would become example 2?
Example 2
7/1/20097/2/20097/3/20097/4/20097/5/20097/6/20097/7/2009
I have not had time to explore the forums yet, but because it handles some books in excel Of course, if you can achieve what I need. I want the cell A1 have within two dates, so far I have something like this:
=TODAY()
-
=TODAY()+4
for example, a cell may be it; 14/01/14-18/01/14
The hyphen it can be anything. i don't want to work with the date every time i work with book.
I'm a macro novice and have been trying to teach myself how to write the correct one for a task I need to do, but I cannot seem to get it right. Basically, I have bunch of data and for one of the variables, different values are separated by commas. What I want is to create a row copying the info below for each piece of data after the comma.
Sheet1
A
B
C
D
[Code].....
I suspect there is a fairly easy way to do this, but I cannot figure it out from searching the forums (or rather, I can't get it to work right).
Is there a way to insert a blank row between every row with data? This is for very large spreadsheets when adding blank rows individually is not an option.
Example:
Data Data Data Data
Data Data Data Data
Data Data Data Data
Data Data Data Data
Data Data Data Data
Data Data Data Data
Needs to look like this:
Data Data Data Data
Data Data Data Data
Data Data Data Data
Data Data Data Data
Data Data Data Data
Data Data Data Data
I have a range of numbers in a single column and I want to insert a blank cell or line below each cell in the range. Is there a quick way to do this, by not using VBA.
View 3 Replies View RelatedI have data like this in column A
ram
ram
ram
reddy
reddy
reddy
lakshman
lakshman
lakshman
and i want to incert blank after the end of each group and i am expecting like this
ram
ram
ram
reddy
reddy
reddy
lakshman
lakshman
lakshman
is it possible to do with simple formulas or i need macro for this? i have huge file with lot of groups like this i can not do this manually by using filters. have look on attched sheet for better understanding.
sample (2).xlsx
I've a sheet and in row A is a list of tasks to do like:
A1 - Task1
A2 - Task2
A3 - ...
Is it possible in VBA to do this:
A1 - Task1
A2 - Blank cell
A3 - Task3
A4 - Blank Cell
A5 - ....
in other words to input a balnk cell between tasks (text)
I am having an excel file in which there is information about 100 products. Every product has around 10-15 features. This way I have 1,000 rows. Every product has its own unique ID i.e. every 10 rows have the same ID thereby making 100 ID's. Now I want to insert a blank row every time the product ID changes so that I can discriminate better between the products. Is there some formula?
A
A
A
A
A
B
B
B
B
C
C
C
C
I want to insert blank rows before B and C. If the number of features were constant, it would have been easy for me.