I need to insert blank row/s between the missing dates and fill the missing date & corresponding employees name. Let me explain in detail,
I have a start date in Cell E1 and end date in Cell G1. Need a macro to verify the date range in Col A with these start & end dates and insert blank row for missing date corresponding to employee names in Col B. This should be repeat till last used row of the sheet. Attached sample(Before&After) workbook.
Both missing date and respective names to be filled in the newly inserted rows.
I need to insert blank row/s between the missing dates. Let me explain in detail,
I have a start date in Cell B1 and end date in Cell D1. Need a macro to verify the date range in Col B with these start & end dates and insert blank row for missing date corresponding to employee names in Col A. This should be repeat till last used row of the sheet.
I am trying to auto generate a calendar based on two drop down menus - Month and Year.
Once the month and year is selected I want to import all work orders onto the calendar based first on the "Labor Name" found in the list of work tab, then assign each work order for that labor name to the respective date on the calendar for the month.
Attached is what I use as a Calendar Macro and it works great for single active cell use.
I have a column for 'Notes' and I can only use 1 cell per item so every time I have an update about a specific item I go the to notes section and put a date and leave few spaces then type in whatever the notes are. Currently I'm doing it manually and I tried to use my macro on the Notes column and what it does is to remove everything in the cell and replace it with whatever date I choose in the calendar.
find a way to use my current Calendar Macro to add a date in the cell instead replacing everything in the cell with a date.
I have a macro that runs in Sheet 1 and enters the word "Complete" in cell P of the active row. The same cell that requires the word "Complete" in Sheet 2 is in cell T of the active row. Is there a way to have the same shortcut that will identify which worksheet it is in and go to the appropriate cell?
I'm trying to create a macro that takes data from one row and inserts it into a new row. Attached is a workbook with a before and after example of what I'm trying to do.
Each row has a security transaction that includes principal cash and interest. The data needs to be formatted so that each transaction has one row for principal and one row for interest.
Principal is identified by the tran code PAYDOWN in column C. Interest is identified by the tran code INT. However, the raw data generated includes both interest and principal under the tran code PAYDOWN.
There could be 100 or 1000 transactions generated based on the day.
I'd like to adapt my macro so that it would insert a blank row after it detects the the first 16 characters of text as "'Closing Balance"; or it could even detect "'Closing" as the first 8 characters if it would be simpler
The Data Begins in Row 5 of Column A
My Current Macro is as below which I have adapted from another one I used
It is not working since it is detecting for the exact text "'Closing Balance" whereas the data registry would write "'Closing Balance as at 31/10/2009" , of which the "as at dd/mm/yyyy" portion would change every time a report is exported, but the first part "'Closing Balance" or even just the word "'Closing" will always be the same.
I have to use several dozen pivot tables a day. I already use a couple of macros to do a lot of the tedious formatting, but if I could automate this it would save me a lot more time. I have been trying to both write a code and modify code written by the recorder but have not even come close to anything that works. What I want is to have a macro that searches through the column header for predefined names and if it comes across one of these names it will insert a specific formula, based on its name, in the first cell below the header. Then it will autofill to the last row and move on to searching for the next predefined header name. If that name is not found, it will move to the next predefined header name. One major problem is that the formula to insert under any specific header name is based on other columns in the table that aren't always in the same range. So, not only do I need it to search for columns to place a formula in, that formula has to search for the appropriate column to find the correct value to use in the calculation.
For example, one predefined column name would be Avg Price. The formula for that column would be (Sales/Qty Sold), but these 2 columns could be located anwhere in the table. How can I get it, once it has found a column that needs a formula, to locate the correct column/cell to get the correct value from the sales and Qty Sold columns?
I'm working on some code that's part of a userform. To illustrate what I need, I will give an example. A column letter, 'J' for example, is stored in colNum.Value taken from the userform. I need both a column inserted before column J, and data entered into that new column in row 2 (thus J2, which would now be blank).
Where is that I have 2 sheets of data, sheet1 contains an ever expanding list of data and I'm trying to create a macro that deletes multiple rows of data from this sheet if the date held within column K is less than the date defined in sheet2.
I am new to VBA programming so i might be making a obvious mistake. I am trying to create a macro that will insert rows depending on a cell value. I also need this to be executed from a command button rather then to occur immediately after the cell value is entered. So as a example
Lets say Cell A2 has a value 20 Cell A3 has a value 3 Cell A4 has a value 5
when this data is entered and then a Command button poressed there should be
I want to achieve is a procedure that inserts horizontal page breaks at certain parts of the sheet where there is a cell equal to 2. Here is the code I have so far.
Sub insert_pagebreak() Dim printbreak_cell As Range Dim j As Long Dim i As Long ActiveSheet.ResetAllPageBreaks Set printbreak_cell = Range("AD1") j = 1 For i = 1 To 100 If printbreak_cell.Value = 2 Then Set ActiveSheet.HPageBreaks(j).Location = printbreak_cell j = j + 1 End If Set printbreak_cell = printbreak_cell.Offset(1, 0) Next i End Sub
Everything works until the cell value reaches a 2, and then once it goes into the If statement I get a 'Application-defined or object-defined error' at the below line.
Set ActiveSheet.HPageBreaks(j).Location = printbreak_cell.............
I need a macro that based on multiple cell dates determines if the person is qualified or not, and puts yes or no in column A... all of the dates are yearly.
I might be using something completely wrong here, but can anyone tell me if this code is possible or am I being very naive.
H4 and I4 are cells in which I want to enter dates, and then I want these dates to be used in a custom filter on another page.
Below is what my limited understanding of VB came up with.
Sub Date_Range()
Dim First As Date Dim Last As Date First = Range("H4").Value Last = Range("I4").Value Sheets("Graph Data").Select Selection.AutoFilter Field:=1, Criteria1:=">=First", Operator:=xlAnd _ , Criteria2:="
I am looking for help. Sheet1 B1:1 has dates in each column in ascending order for one month. There are missing dates in between the days and they might look like this.
Example 1
7/1/20097/2/20097/6/20097/7/2009
Is there a code that will insert columns with the missing dates between the dates that already exist so that example 1 would become example 2?
I have not had time to explore the forums yet, but because it handles some books in excel Of course, if you can achieve what I need. I want the cell A1 have within two dates, so far I have something like this:
=TODAY() - =TODAY()+4
for example, a cell may be it; 14/01/14-18/01/14
The hyphen it can be anything. i don't want to work with the date every time i work with book.
I'm a macro novice and have been trying to teach myself how to write the correct one for a task I need to do, but I cannot seem to get it right. Basically, I have bunch of data and for one of the variables, different values are separated by commas. What I want is to create a row copying the info below for each piece of data after the comma.
Sheet1
A B C D
[Code].....
I suspect there is a fairly easy way to do this, but I cannot figure it out from searching the forums (or rather, I can't get it to work right).
I have a very large Excel spreadsheet that is generated through an Oracle application at least once a month at work. I would like some code (either a worksheet function or a VBA) to check and report the following. If the frequency in column C is "Monthly" or "Weekly" just go to the next row. If the frequency in column C is "Annual", add 183 days to the date in column B; if it is "Semi-Annual", add 92 days to date in column B; if it is "Quarterly" , add 46 days to the date in column B; if the frequency in column C is "2-Year", add 365 days to the date in column B. Once the check has been made; I need the new total or date that was calculated checked against the date the report is being run (system clock date). If the date or total days is less than today, a new worksheet, titled "Late" needs to contain that row of data. If the date or total days is greater than today's date, just go on to the next row. I've attached an example worksheet.
I have an issue with a userform that needs to pull and insert dates.
This hinges on several formulas and pivot tables plus eventually gets imported into access so my needs as shows will not be all that flexible.
this needs to be input as "05/01/2012" but read as "MAY", the userform needs to display the date in a method that makes sense to my temp/seasonal users (mmmm format preferred) but needs to be in the cell as mm/dd/yyyy so the formulas and pivot tables can make properly read them. I have been trying this for months and it seems i can get all the parts working independant but not all at once.
The default reads fine and it inputs fine but the drop down has excel date codes (40156, 40187, etc) The default is fine and inputs the date AS "mmmm" format but cant be read by the forumalas or access.
I am open to examples like making the combo box populate another textbox or field on the form but haven't gotten that to work yet either. Example files and picture in the link [URL] .......
I have a sequence(or a series is more proper) of dates(without the hours) for. exapmple: 10/22/2007,1025/2007,10/25/2007. What I need is to insert rows with the missing dates. I found a VBE code for a macro which does the work but now the problem is that in some rows the dates are the same and if I have two times 10/25/2007 it adds the row with the next date after the first one and all messes up.
Range("A2").Select Do Until ActiveCell.Value = Empty If ActiveCell.Value = ActiveCell.Offset(-1, 0).Value + 1 Then ActiveCell.Offset(1, 0).Select Else ActiveCell.EntireRow.Insert ActiveCell.Value = ActiveCell.Offset(-1, 0).Value + 1 ActiveCell.Offset(1, 0).Select End If Loop
I have tried many different ways of coming up with a solution of this problem without writing a VBA program, however, Excel's date and time formatting scheme seem to be tripping me up. As a result, I am trying to figure out what direction to go.
I have seached the board up and down looking for a solution and I have found one problem that is midly similar but I do not fully understand the code. I have tried to modify it but to no avail.
Here is my problem:
I have 9 columns of data that are reported in 15 minute intervals for a little over 3 years. There are missing data in the data set and it would be infeasable for me to manually find and replace the missing data. (Over 110000 rows of data)
Example of data (Where "/" delienates column seperation):
Date / Temp 2m / Temp 10 m / Radiation / RH / WindAve / WindMax / WindMin / Rain
So what I need to do is this: 1) Find which data times are missing 2) Add the appropriate amount of rows in between where the missing data would be 3) Add the correct dates to the new rows 4) Add "N/A" to the columns that have no data
You can see that my date and time are formatted in mm/dd/yy hh:mm
I found this on the website and was trying to modify it to my needs:
I recently installed Excel 2007, and have shared others' joy in searching for things on the ribbon. I tried to record a macro to insert an autoshape. Excel creates the macro, but drawing the autoshape is not recorded. I'm sure I'm missing something obvious ...
I'm trying to create an excel worksheet as follows:
Column1 Column2 Column3 Column4 Column5 Date Time In Time Out Hours Worked Pay 01/03/2000 01/04/2000 01/05/2000 . . 11/11/2008
I want to insert in the first column (Column1) dates starting from 01/01/2000 all the way up to today, 11/11/2008. So I would end up with a unique date on each row. To accomplish this manually would be a daunting task. I'm a newbie to excel and don't know how to use any in-built functions.
I have created a time sheet in excel (see attached) that will be part of the larger workbook that will be linked with other sheets to auto fill in most fields. I am wondering if there is a way for an user to enter a Month and a Year at the top of the page and that in turn automatically fills in the days of the month by week.
So in attached sheet there are 5 boxes representing 5 weeks in a month. So if we used May 2014 as an example I would like to know if there is a way that once May 2014 is entered in up to top that. Excel fills in the dates in Week #1 with under Thursday showing 1st, under Friday showing 2nd as on for the entire month...
So as the month go by all user has to do is state the month and year and excel fills in the weekly dates for each day in month.
I have a workbook that I've built for a project. I've attached a sample workbook. What I'm trying to do, for the entire sheet or workbook if possible, is turn any Cell with a percentage of 30% to 49% yellow and any cell with a percentage of 50% or more Red. I would also like to move the ID's of the variable cells, for example Id number 9922, to the cells beside the description of the rows, Affected would be an example, if the information contained in the same row as the ID meets with a set of variables.
For example I only want the ID's moved if they correspond with IDsub 1-25. One more thing, the people who will be using this spreadsheet will be copying data from a website when it is imported it does not insert the values as numbers. I would like to format the cells, in example workbook they would be any of the cells labeled ID IDsub Variable or Number, so that anything put in that cell will automatically be converted to a number.
I should also probably add that the formatting will be done on approximately 80 rows a sheet with 47 sheets.
