Macro To Return Yes Or No Based On Multiple Cell Dates
Dec 16, 2008I need a macro that based on multiple cell dates determines if the person is qualified or not, and puts yes or no in column A... all of the dates are yearly.
View 5 Replies
ADVERTISEMENT
Return Multiple Results In Multiple Cells Based On Criteria In Yet Another Cell?
Feb 1, 2012Worksheet 1: In column A I have a people's initials. In coumn B I have text boxes with miscellaneous text. (The same person could have multiple rows within this sheet.)
e.g.
AAA blue
BBB orange
AAA round
CCC smelly
AAA elongated
Worksheet 2 I want to show:
A2 = initials, B2 = first text box associated with that person, C2 = second text box (different row) associated with that person (if applicable), D2 = third text box (different row) associated with that person (if applicable), etc.
e.g.
AAA blue round elongated
BBB orange
CCC smelly
Return Value Based On Multiple Possible Values In A Cell
Nov 21, 2007I have in A1 a string of 100 characters..
I would like to create a SELECT CASE where,
if in A1 there is the word "BLACK" , put 1 in A10
if in A1 there is the word "WHITE", put 2 in A10
else put 50 in A10
I'm trying to use the instruction INSTR but with negative results..
(I have many cases other than BLACK and WHITE, that's why I need a SELECT CASE)
Calendar Macro To Insert Multiple Dates Within The Same Cell
Jul 4, 2014Attached is what I use as a Calendar Macro and it works great for single active cell use.
I have a column for 'Notes' and I can only use 1 cell per item so every time I have an update about a specific item I go the to notes section and put a date and leave few spaces then type in whatever the notes are. Currently I'm doing it manually and I tried to use my macro on the Notes column and what it does is to remove everything in the cell and replace it with whatever date I choose in the calendar.
find a way to use my current Calendar Macro to add a date in the cell instead replacing everything in the cell with a date.
Return 1 Result From Many Based On Multiple Condition Check Of Cell Value
May 21, 2008I am trying to write a formula to figure out Body Mass Indexes for certain age groups and whether or not they fall into a High or Low risk category. So, I am trying to write a formula that does the following. I have 3 columns, Gender, Age and BMI. I need the formula to do the following.
IF Gender = M AND Age >18, <39 AND BMI >7%, <19%, Then return an "L" into 4th column
IF Gender = M AND Age >18, <39 AND BMI >19%, Then return an "H" into 4th column
IF Gender = M AND Age >40, <59 AND BMI >14%, <23%, Then return an "L" into 4th column..............................
Macro To Select Dates Based On Cell Values
Feb 20, 2009I might be using something completely wrong here, but can anyone tell me if this code is possible or am I being very naive.
H4 and I4 are cells in which I want to enter dates, and then I want these dates to be used in a custom filter on another page.
Below is what my limited understanding of VB came up with.
Sub Date_Range()
Dim First As Date
Dim Last As Date
First = Range("H4").Value
Last = Range("I4").Value
Sheets("Graph Data").Select
Selection.AutoFilter Field:=1, Criteria1:=">=First", Operator:=xlAnd _
, Criteria2:="
Find To Search And Return Multiple Dates
Jul 31, 2007I am working with a macro into which you input a date, the macro searches for that date (in column D of the data sheet), then copies any row with that date onto a new sheet.
This works great, but now I need to be able to search for more than one date at a time and return any rows that cantain ANY of those dates. For example, I would want to search for any row containing 01/01/07 - 01/07/07 or any row containing 01/01/07, 01/02/07, 01/03/07...01/07/07.
Return Multiple Values From Columns To Rows Between 2 Dates
Feb 8, 2013I got a good start on what I need to do from this thread here: [URL] ......
A user will use a userform to enter in results from a room inspection into one sheet and then on another sheet selects the maid and it pull up the matching room inspections. I wish to then limit it to a date range which can be found in two cells.
Currently cells D2:H2 contain the array
[Code] ......
and cells D3:H3 contain
[Code] .........
I would like to further limit those searches by restricting the date range, Cells D4 and E4 contain the first of the month and last of the month respectively.
I would like to avoid the easy answer, start a new workbook each month, but I won't be the person entering the data or using the separate sheet to conduct performance reviews so it needs to be one workbook that lasts from month to month.
Macro That Will Auto Color Multiple Cells Based On Data Displayed In One Cell
Jan 7, 2013I am trying to find a way to write a Macro that will auto color multiple cells based on what data is displayed in one cell. The cell I want to reference is a vlookup cell.
Basically this is a part label. And depending what part is selected from the list my vlookup will display its position on a vehicle(i.e.. FR, FL, RR, RL, Etc..). So if vlookup comes back with FR I want the various cells on the label to be orange, etc..
ALSO: if there is a way to embed it so it does this automatically (rather than run the macro each time).
Excel Macro To Copy Cell From Multiple Sheets Into Single Sheet Based On A Value
Aug 16, 2013I have an excel document with multiple excel sheets(sheet1, sheet2...etc), now every sheet contains a cell "total".
Now I want to copy the row containing "total" from all the sheets into another sheet called "report".
Compare Dates To Date Range & Return Date Based On Outcome
Jul 1, 2008I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in
D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
Finding Recent And Previous Dates Based On Multiple Criteria?
Apr 29, 2014i have with noting the most recent date of a test and also the one prior to the most recent dependant on location and test type. I require most recent and previous test info to enable a comparrison to be made. All other dates are not required but need to be kept as historical data and can't be deleted.
Is there anyway i could get column E to auto populate and amend itself as more test dates and locations are added to the list?
Return List Based On Multiple Criteria
Mar 13, 2014I have a spreadsheet with several hundred line items that I basically want a summary of.
STRINGS CRITERIA OTHER
string1 criteria1 other2 <---disregard because of other2
string1 criteria2 other1
string1 criteria2 other1 <---disregard because it is a duplicate
string2 criteria3 other1
string2 criteria3 other1 <---disregard because it is a duplicate
string2 criteria2 other2 <---disregard because of other2
string3 criteria1 other1
string3 criteria1 other1 <---disregard because it is a duplicate
I need the formula to return the value in STRINGS & CRITERIA, but I do not want it listing duplicates.
-I need the summary list on a separate sheet
-STRINGS, CRITERIA, and OTHER are all strings
-STRINGS are in alphabetic order
-CRITERIA are listed in groups with regard to their STRING, but not necessarily alpha-order
-OTHER are not in any particular order, but there are only two choices for OTHER
-OTHER: if OTHER=other2, it should not be listed in the results
RESULT
STRINGS CRITERIA
string1 criteria2
string2 criteria3
string3 criteria1
Return Result Based On Multiple Criteria
Sep 19, 2009I have been trying this for hours but to no avail.
I have a table with 4 columns headers
Name, Amount, Loc and Code
The name may look like ABC 1, ABC 2....
The Loc may be in US, GB...
and the Code may be AA, BB
I need to return a result "Y" if the sum of the amount is > 100
and "N" if the sum of the amount < 100 based on the conditions
of the following :if
1) Name is the same entity, such as ABC 1 and ABC 2 and
2) Loc is the same, US..and
3) Code is the same
I have attached a sample to illustrates the result
Return Multiple Results Based On Criteria
Dec 1, 2006Please see the attached sheets.
Here's the issue:
On sheet "master" I have a list of goals in column A.
Each has been assigned to at least one person. Each person will have their own sheet that will capture the goals assigned to them. As an example, see Al's sheet.
I am trying to get Excel to look for all of the goals assigned to AL on the Master sheet and list them nicely onto AL's sheet without out blank rows. (and for each, respectively on their own sheet). I could do this with Pivot Tables if the data were displayed differently, but I have been told that I have to display the goal assignments as shown.
I could use "x"s instead of their names to mark the assignment and I could combine the "goal-achieved expectations" and "goal #s" columns if it helps. I am not supposed to use filters either.
Note: Of course, a goal or an assignment could change on the master sheet, but the assignment is more likely to change.
how this done for AL, I can go ahead and create the other sheets.
VBA Macro To Insert New Row/s Based On Two Dates
May 20, 2014I need to insert blank row/s between the missing dates and fill the missing date & corresponding employees name. Let me explain in detail,
I have a start date in Cell E1 and end date in Cell G1. Need a macro to verify the date range in Col A with these start & end dates and insert blank row for missing date corresponding to employee names in Col B. This should be repeat till last used row of the sheet. Attached sample(Before&After) workbook.
Both missing date and respective names to be filled in the newly inserted rows.
Search For Multiple Text Strings In A Cell - Return One Of Multiple Corresponding But Different String
Mar 11, 2014I have a spreadsheet with 1,000 rows of data.
Each Cell in Column A has a different long text string.
I need to see which (if any) of 10 specific small text strings exist within each long text string. Depending on which small text string is found I want to return a 3 digit code. If no small text string is found I want to return "Not Found"
E.g.:
- Cell A2 contains "randomtext,randomtext,APPLE,randomntext"
- I want to see if Cell A2 contains any of the words APPLE, ORANGE, CARROT.
- I want to return "APP", "ORG", "CAR" or "Not Found"
Q: What is the most elegant way to accomplish this within a single formula that I could paste into each cell in Column B?
Count Working Days Between 2 Dates, But Return A Zero If The 2 Dates Are The Same Day
Jan 15, 2009Today I am having a very annoying problem that really has me stumped – I need to work out the lag between a Due Date and Delivered Date
But as people sometimes manage to deliver on the Due Date it needs to show a zero (as in they got it in on time) but using the formula below the result is a 1 and I want a zero
Can anyone help me please? I have tried putting assorted -1s in to the formula and it looks like it might work until I copy down and find that if a person delivered one day early the result shows -3 for example!
Return Data From Table Based On Multiple Conditions
Jul 26, 2014Want to be able to select data from Column C (3 data validations/drop down menus) and have the corresponding values display in the appropriate fields in column H. Not sure if this is possible?
View 4 Replies View RelatedVBA Macro To Insert Blank Row Based On Two Dates
May 16, 2014I need to insert blank row/s between the missing dates. Let me explain in detail,
I have a start date in Cell B1 and end date in Cell D1. Need a macro to verify the date range in Col B with these start & end dates and insert blank row for missing date corresponding to employee names in Col A. This should be repeat till last used row of the sheet.
Attached sample (Before&After) workbook.
Insert Missing Date.xlsx‎
Deleting Data Based On Dates Using Macro
Jun 17, 2014Where is that I have 2 sheets of data, sheet1 contains an ever expanding list of data and I'm trying to create a macro that deletes multiple rows of data from this sheet if the date held within column K is less than the date defined in sheet2.
View 4 Replies View RelatedArray Formula To Return Multiple Values Based On Various Criteria?
Dec 19, 2013I can manage an array formula that returns a value based on a criteria. Simple. But I want to add in an additional couple of criteria. Now I'm stuck....
My sheet looks at a manually entered postcode, finds out what region this is in, and returns a list of postcode I have defined as being in that region. (So the postcode WF1 3JY would return a region of Yorkshire, and list postcodes of WF, BD, L, etc)
I also have a list of engineers, with a column for their home postcode.I want to be able to list all the engineers from my list whose home postcode matches any of the values on the already created list from the postcode and region entered. So far I have this, which finds me all the engineers for just one postcode area.
Search Text String And Return Value Based On Multiple Criteria?
Apr 8, 2013Here is an example of the data I get each day Letter order granting Sabine Pass Liquefaction, LLC's et al 4/16/12 request to add an alternate water source etc under CP11-72.Letter order granting Cameron LNG, LLC?s 4/5/13 filing of a request to introduce natural gas or process fluids into the BOG Liquefaction Project under CP12-15.Letter order accepting NorthWestern Corporation's 8/7/12 submittal of revisions to its transmission planning process to comply with the Commission's June 8, 2012 Order under ER11-2932.Letter order approving Public Service Company of New Mexico's 12/7/12 filing of a joint Offer of Settlement with Navopache Electric Cooperative, Inc under ER11-4534 et al. How can I set up my spreadsheet and what formulas can I use to search and return a value for each text string based on the attached table (column B)?
E3a7qta.png
Return Multiple Values Across Columns And Rows Based On Criteria
Jun 20, 2008I have a table with column headings of product ID Numbers (eg.1111) and row headings of Store number (Eg.1) with data showing the time each product was last sold at that store, I need something to consolidate for each store which Product ID's were sold prior to 5pm and what time they were sold.
EG
Store 1 1111 16:40
2222 13:00
Store 2 1111 15:05
3333 16:50
Formula/Function To Return Multiple Values Based On Criteria
Aug 25, 2006I would like to be able to use the Vlookup function to return more then one value as a result of the criteria. I have a cloumn of dates that populates the X axis of a gantt chart with data whilst the Y axis will be populated by a site reference resulting in a program of work, the Y axis data is the result of a vlookup function. My difficulty arises however with multiple sites, for instance where two or three sites will be visited on the same day. The vlookup function will only return the first value it finds in a range to the formulated cell. The result being a missing site(s) from the gantt chart / work program. is it possible to return all values to a cell i.e. site1, site2, site3. using a vlookup or do i need to use another method of doing this?
View 2 Replies View RelatedMacro To Return Data From One Worksheet To Multiple Sheets
Jun 4, 2014I have a worksheet (named "A") contains all data, and would like to have a macro to searching in A under condition of date,and return those data to in a cell of different worksheets (saying worksheet B, C, D). and everytime i run the macro previous data wouldn't be replaced by new one. Example: worksheet A has data
worksheetname date number
B 01/01 10
B 02/01 11
B 03/01 12
C 01/01 13
C 02/01 14
C 03/01 15
VBA Macro To Take List Of Multiple Inputs / Apply To Another Spreadsheet And Return
Sep 22, 2013I want to create a macro to take multiple inputs from sheet 2, apply them simultaneously to the inputs on sheet 1, take sheet 1's output and list next to the inputs on sheet 2. I want to apply this to a spreadsheet with complicated calculations. Example spreadsheet attached. Related Macros I have will do a similar thing but only take one input at a time. Code as follows.
VB:
Sub x()
Dim r As Range
With Sheet2
For Each r In .Range("A2", .Range("A2").End(xlDown))
Sheet1.Range("A2") = r
r.Offset(, 2).Resize(, 3).Value = Sheet1.Range("C2:E2").Value
Next r
End With
End Sub
Reverse VLookup (Index Match) To Return Multiple Values Based On Single Lookup Criteria
Jul 11, 2012I have encountered a situation where I need to essentially accomplish a reverse Vlookup (using index match) and return multiple values.
View 1 Replies View RelatedLookup With Multiple Criteria: Return The Amount Paid And Full Cost Based On The Person's Name And The Date
Apr 21, 2006I would like a lookup that takes multiple criteria and that is not an array formula! Unfortunately I decided to use array formulae and my spreadsheet went to over 45mb!! Not good. I've searched the forum for an answer to my questions but couldn't find any! I've attached a spreadsheet as an example. The examples I am using have {Sum(IF)} formulae in it (array) and I would like to change those to others that will not increase the file size so much and will not take too long to calculate.
Basically, I would like a lookup that will return me the Amount Paid and Full Cost based on the person's name and the date. the data and the results table are both on separate sheets. It would be nice to bring that file's size back down to less than 4mb!!
Excel 2010 :: Return Range Of Cell Concatenated Based On Single Cell Value
Jul 2, 2012I have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:
Number of variable entered: 5
q9001
q9002
q9003
q9004
q9005
q9006
etc.
Should give me: "q9001 q9002 q9003 q9004 q9005"
I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.
(Using Excel 2010)