i need to connect some cells, but have to check to make sure cells dont have zeros in them first
example m13 m14 m15 m16
................5......10......0........15
in cell q18 i want it to show this 5/10/15, dropping the zero cell
I am making a spreadsheet and would like the "placement" tab to look at the "years in position" column and go to another tab and find the corresponding data then put that information into the cell that the formula is in. I have concatenated and the value carries out to about 6 decimal and I cant change the formating. I would like it to display as a currency with 2 decimal places.
If you look at the placement tab cell H7 you can see what I am trying to do. If you change the value in d7 to a value that is on tab 06-09 step plan (b9-b23) then the value is put in other wise noting is returned.
I am using this code
View 5 Replies View RelatedI cant seem to figure out how to concatenate data from two cells into one cell and retain trailing zeros. If Cell A1 has ".0000" and cell A2 has ".0005" then I want cell A3 to show:
".0000-.0005".
I get "0-.0005" on my attempts. Alos, how do I make the value an actual number and not a formula?
I asked this along time ago and received a worksheet formula which suited my needs then. http://www.excelforum.com/excel-work...trailing+zeros
Now I need this in a macro. Below is my current concatenating code.
I have a sheet where some data is entered in A1 to C1 and i use concatenate to string them together. The problem is in cell C1, where I used cell format to customize the number of zeros in front of the number.
EG:
A1: Photos
B1: 2013
C1: 00001
the concatenate result is Photos2013\1, instead of the desired result of Photos2013\0001.
I need a formula to drag down the attached that will place zeros infront of any numbers that don't have 9 digits. so if a part number consists of 6 digits then i need 3 zeros in front of it, if a part number consists of 9 digits then i dont need any zeros proceeding it.
View 2 Replies View RelatedSampling table :
one
two
three
four
one
two
three
one
two
one
Desired results obtained via IF =IF(B2>0,A2&" , ",A2)&IF(C2>0,B2&" , ",B2)&IF(D2>0,C2&" , ",C2)&IF(D2>0,D2,"")
one , two , three , four
one , two , three
one , two
one
Is there any smarter, shorter formula via Concatenate and Substitute or other formulas ?
My closest match, but not good enaugh is =SUBSTITUTE(CONCATENATE(A2&", "&B2&", "&C2&", "&D2), ", , ", " ")
[ returna 2 commad ]
one, two, three, four
one, two, three,
one, two
one ,
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
I have a spreadsheet for which I have to set up a formula to get the minimum value from a range of cells, but that range can include blank cells, errors (#DIV/0) and zeros, all of which I want to be ignored. I can work out how to ignore EITHER the zeros
(=MIN(IF(C10:G100,C10:G10)),
or the error cells
(=MIN(IF(ISNUMBER(C9:G9),C9:G9)),
How to exclude both. If I try to combine both of these exclusion criteria it doesn't work and I end up with the answer #DIV/0, which is one of the values I want it to ignore.
with the data in the attached sheet, I create several different pivot tables that need show the count of the information in the columns M:DU. My issue is that the data is sent to me from a third party and the columns contain zeros that cause the counts to inflate.
What I would like to be able to do is run a macro that will search out any zeros in M:DU and replace them with a blank cell.
Unfortunately the number of rows increases with every monthly reporting cycle so the macro would need to be able to accommodate for that.
I’ve created a formula for this statistic and I’m happy with the results. Because I’m working with formulas, my only problem is the unwanted zeros. How do I hide zeros that show up automatically (i.e. #3 [blank] and Nov 09-June 10)? I can hide the numbers, but if I enter a zero to one of my future statistics it will not appear and I don’t want that to happen. Is there a way to hide those automatic zeros without affecting my real zeros?
Vendor’s Name
Jul 09
Aug 09
Sep 09
Oct 09
Nov 09
Dec 09
Jan 10
Feb 10
Mar 10
Apr 10
May 10
June 10
1
Vendor1
20
5
15
3
0
0
0
0
I want to take an average of only non-zero numbers in a range of cells containing a few zeros. I know there is a function to do this, but I haven't been able to find it. With the normal average() function, the denominator is too large as cells with 0 are included.
View 9 Replies View RelatedI am basically making a sheet that counts attendance, everytime an X is placed in a particular cell another cell counts that x. So if there are 25 x’s in one row, another cell will automatically add those x’s to show 25. That isn’t my problem. My Problem is the cell that contains the countif formula that adds the x’s are all 0 if there is no data for it to add. I want to make it blank because right now I have a whole bunch of 0’s going down one column and can’t figure how to get rid of it.
Right now I am using: =COUNTIF(C20:X20,"x"). I normally would take the time to research and look through your forums however I do not have the time at the moment and was hoping for a fast answer.
I am calculating ratios to show as 1:0 or 3:2 etc using this formula: =IFERROR(CONCATENATE((K2/GCD(K2,N2)),":",((N2/GCD(K2,N2)))),"Nil")... I have a lot of columns that have zeros in them and the formula i am using doesn't seem to work for those...
Example
A B
3 6 should equal: 1:2 works OK
2 0 should equal: 2:0 my current result: 1:0
3 0 should equal: 3:0 my current result: 1:0
0 1 should equal: 0:1 works OK
0 0 should equal: Nil works OK
4 1 should equal: 4:1 works OK
Anything with a zero in the first column comes up as 1:0
i have a mock up football issue here i want to enter scores in sheet 1 and they automatically fill sheet 2 etc i know i can just =and copy sheet 1 A5 and so so but that leaves zeros which will start allmy formulas with 1 point i need a formula that will leave sheet 2 3 etc blank untill any score is entered
View 3 Replies View Relatedi am creating a football prediction sheet, and have a problem where blank cells are treated as zeros.
The enclosed spreadsheet shows the formulas in green working fine, but the blanks are treated as zeros in cells j6, I7 & J7.
I had been trying to calculate cells that contain numbers with leading zeros.
I can't convert the cells to TEXT because Formulas don't work in TEXT Cells.
I cant use Custom Formatting because the rows may contain different number of leading zeros.
Also Is there a way that I can trim the numbers from Col A and put them in C?
Currently I don't like having to change the RIGHT(G2, 3) to RIGHT(G2, 4)
if the number is smaller than the number of char. option.
excel formula to keep leading 0's in a cell. ex: "0069" to 0069, "000123" to 000123 and so on.. Attached file for the same.
View 3 Replies View RelatedHere are my cells and values
B38 C38 D38 E38 F38 G38 H38 i38 J38 k38 L38 M38 N38 O38
0.00
None
1.95
16
1.73
21
0.00
None
20.10
20
1.73
20
0.00
None
What I would like to do is average only every other cell AND also not count zeros. So =average(B38,D38,F38,J38,L38) generally the idea not averaging H38 & N38 since they are both zeros.
I would like to average a non-continuous range of cells while also excluding all zeros.
I am averaging hours worked and the hours are found in cells:
B2, D2, F2, H2, J2, L2, N2
Some of these cells contain zeros at this time and I do not what to include the zeros in the average.
I have found formulas that would work but they are all with continuous cell ranges.
Here is a question about the chart in excel. I have a sort of data where only part of the data is in numbers, and when drawing the chart, the whole range of data were selected. Then on the chart, there is a line drop to the x- array, anyone knows how to get rid of it? It is a line chart. Here's an example if i did not clearly describe the problem
Here's data
X Y
4354.28
5354.75
6352
7343.82
8aa
9aa
10aa
11aa
12aa
and between 7 and 8 on x, the line will drop from 343.82 to 0, and i don't want this part, i want the chart to show to 7 and leave the 8 to 12 blank..
I have the following formula which works perfectly unless one of the cells has a value of zero;
=MIN(SUM(AD13),MIN(SUM(AK13)))
When AD13 = £60.00 and AK13 = £94.00 (or vice versa) the formula returns £60.00, which is correct. BUT when AK13 = £0.00 obviously the formula returns £0.00, but I would like the formula to still return £60.00.
How this can be done?
I have 2 columns which contain numbers that have laeding zeros. example:
Column H has 002345 and Column I has 0678. I have tried H1&I1 but the leading zeros are stripped off. Is there a way to combine 2 cells AND preserve the leading zeros in both cells ?
I'm having a rather difficult time getting this one.
I am concatenating (is that a verb?) a bunch of cells to create an item code.
The combination of two different cells need to be able to give different values so I can dump the appropriate value into the CONCATENATE formula.
A picture is worth a thousand..
On tab 2 of a spreadsheet, I am trying to concatenate several cells on tab one! Everything comes together in the cell on tab 2, however it does not hold the date format. It turns it into general text so just random numbers that do not even tie to the date. Any way to lock the date format for this idea?
View 7 Replies View RelatedI have 7 consecutive cells which contain a %
e.g. A1 120%, B1 35% etc
I am trying to put them into one cell using concatenate
but am getting 1.20.3529411764705880.705882352941177
I would also like to separate them by comma,
I have managed to retain leading zeros in a cell by formatting the cell and selecting Number and Custom and adding the maximum number of zeros I want to have in front of the number in the cell i.e. 000002.
I want to have another cell in the spread sheet which contains the value 35394000002 using the formula =A24&B24.
When I use this formula I get 353942. How can I retain these zeros?
I have 4 columns (and a couple of other text columns) that are formatted as decimal with 6 dicimal points.
I need to create a text file with lines that are 80 bytes each from the spreadsheet - no spaces inbetween each of the characters.
The issue I am having is trying to format the 4 decimal point columns to be fixed numbers and retain the leading or trailing zeros to do a concatenation with the other columns.
Just an example of some what some of the values look like on my spreadsheet:
.123456 | .123450 | .012345 | .012340
Essentially when I'm all said and done, I would like the row to look like "text123456123450012345012340text"
I tried to format 4 new columns as general and use a "=right(cell,6)" and that worked pretty well for the cells that have leading zeros, but for the cells that have trailing zeros, it doesn't seem to pick up the zero. I tried to use a "=mid(cell,2,6)" but that didn't work either.
Is it possible to keep ending zeros in cells that are formatted for Text or General?
I have a column with numbers like the following: 264400
I need to format this number for three decimals so it will look like the following: 264.400
I need the column to be formatted for either Text or General. Currency breaks a system.