The problem with the code below is that it re-prompts the input box for each worksheet that the macro runs through.
What I would like to happen is the Input box appear at the begin, and that value is stored and then the same value pasted into A2 on each worksheet.
Code:
Dim ws As Worksheet
For Each ws In Worksheets
Rows("1:1").Insert Shift:=xlDown
[Code]....
The code below first asks a user to input a weekending date (which must be a Saturday). The value of the input box goes to cell C1 of my spreadsheet. That part works fine. I also have a function in Cell G1 with the function:
=TEXT(C1, "dddd")
I don't know if this is the best way to test for a Saturday but it is what I have,
Where is goes bad is if the date is not a Saturday. I have a loop to force a new date install via a input box but it won't update C1 with the inputed data to recheck for the Saturday value. Below is the whole code I am working with...
Dim aa As String
Dim bb As String
If Range("C1") = "" Then
Do While bb = ""
bb = InputBox("Please Enter a Weekending Date!")
Loop
Range("C1").Value = bb
End If
If Range("G1") "Saturday" Then
Do While aa "Saturday"
aa = InputBox("Weekending Must Be a Saturday. Please Enter a New Weekending Date")
Loop
Range("C1").Value = aa
End If
I wrote a macro to loop through all of the worksheets in a work book and print all of the sheets except the first one labeled as "BidCandidates" and the last sheet labeled as "Blank".
It works just fine. However, I want it to work even when there is no first sheet labeled as "BidCandidates" and last sheet labeled as "Blank". There will be an unknown number of sheets to print and they will all have a label starting with a number from "02" through "50". For Example "02 - Selective Demolition".
Here is the code I have written;
Sub Print_All_Analysis_Sheets()
'
' Print_All_Analysis_Sheets Macro
'
'
Application.ScreenUpdating = False
Sheets("BidCandidates").Select
ActiveSheet.Next.Select
[Code]...
I am trying to figure out a way to do the following: I have multiple worksheets with 2 columns of data. The data contains name and value, so 2 columns is all I would be looping through.
I need to loop through the multiple worksheets and add any values that are similar to the particular name.
I'm trying to loop through all visible worksheets and then when im those worksheets, I want to run a simple macro.
Here's the code I have:
Sub formatting()
Module10.Part5
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
Module12.Part6
Next ws
End Sub
The problem I'm encountering is that the macro(Module12.Part6) keeps running in the ActiveSheet (the sheet i have open) and isn't actually looping through the worksheets.
Is there any easier or better way to apply a macro to all visible worksheets?
Why wont this loop thru all worksheets? It seems it runs worksheet named "Monday Wk (1)" for each sheet and no others.
View 9 Replies View RelatedThe code should go through each worksheet and if the row in column A has a null value or 0, then delete the row. The count is based off of column T. The row deletion portion of the code works, but something is wrong with my worksheet looping structure.
View 5 Replies View RelatedCode to loop through worksheets 1 to 3 only and perform a certain task, and how to define the variables i.e. worksheets 1 to 3 when I am not using actual sheet numbers, but tab names. (worksheet 1 to 3 is just the positionof each tab).
What i need the code to do is perform a task on the first sheet, loop to the next sheet, perform the same task, until it has done the 3rd sheet.
I'm getting an "Invalid or Unqualified Reference" error at the 'division=.cells' line when I try to go through each worksheet and paste some info from there onto a summary sheet. I know there is probably a simple solution that I am oblivious to.
Code:
For Each sheet In ThisWorkbook.Worksheets
i = 1
division = .Cells(2, 1)
[Code].....
Looking for For Loop to loop through 5 specific worksheets in a work book.
Something like this, but can't find right syntax:
For iCounter = 1 to 5
If worksheet.name = "Recap" & iCounter Then
'do stuff
End If
Next iCounter
I am trying to write code that will loop through one sheet, fill an array and then use that array to populate cells in another sheet. I have a sheet with group names in column A, then in column B through Column IV there are the members of that group. There may be no members in a group or every cell through Column IV could contain data. I need to loop through each row, one at a time, see if a cell contains data, if it does, put it in the array, if it's empty then the array is done for that row. I then need it to go to another sheet and dump that data, however, now it needs to drop it in five consecutive cells in a row, then drop to the next row for the next five cells, etc.
Once this is done it then goes back to the first sheet, drops to the next row nad starts over.
I know how to loop through the rows, I just am not sure how to fill an array using variables for rows and columns. i.e., I can't say fill array with b1 to b30 instead I have to say fill array with intRow,intFirstColumn through intRow, intLastcolumn.
Where i want to carry out a find and replace specific to different worksheets.
At the moment i have:
Sub Changeme ()
Dim SH As Worksheet
Dim rng As Range
Dim rCell As Range
Set rng = ActiveWorkbook.Sheets("sheet3").Range("A8:C10")
[Code] ........
Where column A contains the tab name, column B contains what to replace and column C contains the replacement.
Having problems with input boxes. I'm trying to creat 3 input boxes that will prompt the user to input 'Add1' in cell A1 'Add2' in cell B1 and 'Add3' in cell C1. Then return back to the first prompt box ready for further info - but this time, if it finds info in cell A1 it needs to move down to A2....and so on. Just about down the easy bit and have the three input boxes working - but unfortunatley that's it.
View 7 Replies View RelatedI'm trying to create code that will clean up a budget template of numeric inputs so it can be reused. This is as close as I can get but the code still isn't right.
[HTML]Sub ClearSheets()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
ws.ActiveSheet.UsedRange.SpecialCells(xlCellTypeFormulas, 21).ClearContents
Next ws
End Sub[/HTML]
I have 2 worksheets saved in the same folder (C:Documents and SettingsAll UsersDocuments). One worksheet is named 'Input' and the other is named 'Records'.
The Input sheet is in the below format (where '|' represents cell divide):
A|B
1|First Name|John
2|Surname|Brown
3|DOB|27-4-80
4|City|Leeds
The Records sheet lists all the records in the below format:
A|B|C|D
1|First Name|Surname|DOB|City
2|Andy|Smith|2-6-80|Leeds
3|Fred|Bloggs|4-8-79|Manchester
On pressing a Command button named 'Add' on the Input sheet I need to be able to extract the information from cells B1, B2, B3 and B4 and place it on the next available row on the Record sheet (ie. row 4)
Worksheet 2 is the master file and contains various information. Worksheet 1 is the input sheet. If Column A sheet 1 matches Column A sheet 2, copy data from Column B sheet 2 and input into Column B sheet 1.
I am both employed and self employed. so I have built a spreadsheet to keep track of expenses... but I hate having to scroll down to enter more and more expenses. So I have created multiple worksheets...
WORKSHEE 1 "INPUT"
Expense Categories down COLUMN 1
Dollar Amounts down COLUMN 2
I would like to use this worksheet to just enter data from a receipt, then press enter and have this information transferred over to WORKSHEET 2 " TOTALS" on its own ROW. Once Enter is pressed, then enter in the same cells on WORKSHEET 1 "INPUT" for another receipt and once Enter is pressed, the data would transfer over to the next row on WORKSHEET 2 "TOTALS" and so on...
So if I want to see my totals... I just go to WORKSHEET 2 "TOTALS"
I have built WORKSHEET 2 "TOTALS" as follows
ROW 1 is the SUM for each respective COLUMN
Each COLUMN is its own CATEGORY from WORKSHEET 1 "INPUT"
Each ROW would represent a new data entry.
To be exact.....................
i have one main sheet, and two resource sheets. In main sheet i have resource and project Matrix and in top of the cell i can select the week number. in other sheets, i have week and project matrix for resource. Now what i want is if I enter some details in main sheet, those values should be automatically posted to Resource sheets.
View 2 Replies View RelatedLook at the tab "testing-allproduct" cell C2. If that value exists in the tab name "store-allproduct", cell c2, then take the value from "store-allproduct" cell a2, and put that value into "testing-allproduct cell" A2.
View 2 Replies View RelatedI am trying to write a VBA procedure that uses nested For/Next loops to store the contents of a range in three worksheets to a 3 D array and then input the array into another location.
I have no problem doing this for a 2 D array, but am completely stumped on what changes I need to make in order to perform the same task on a 3 D array.
I will post my code for 2 D arrays below and will also post the uncompleted 3 D code, although, it is currently of no use because I am so lost on the 3 D array.
How do I reference sheet1,sheet 2 etc. when declaring my 3 D array? I know how to reference the rows and columns for my 2 D array by using the cells or range object, but what to do for the different sheets.
Two D Array:
Code:
Public Sub For_Next_Two_D_Array() Dim I As Integer
Dim J As Integer
Dim MyArray(4, 4) As Integer
For I = 1 To 5
For J = 1 To 5
MyArray(I - 1, J - 1) = Cells(I, J).Value
[Code] ........
Three D array:
Code:
Public Sub Store_ThreeD_Array()
Dim I As Integer
Dim J As Integer
Dim S As Integer
[Code] ......
I have some code (listed below) that will open 2 groups of files(for testing purposes, I have been using for only 2 file prefixes, but will need for upwards of 10, and more may be added in the future), depending on what files have been opened in the past (it will skip those) and then import the new ones.
I am now trying to clean up my code, and having alot of it abled to be maintained be editing a spreadsheet (administator controlled)
What I would like to do is something similar to:
defvar= cells(1,1) 'where cells(1,1) has all of the info for that file to import
Selection.TextToColumns defvar
I realize this will probably be a little more complicated than this, and may even be its own sub or funtion.
Here is my starting code, and it works fine: ...
I want to store number as text like green sign display at the top left corner.
View 7 Replies View RelatedI want to store a list of strings in an array with their position so that I can sort them alphabetically and then be able to put them back in their original order again e.g.
John 1
Charlie 2
Paul 3
Andy 4
etc,
So when they are alphabetized (is that a word?) they become
Andy 4
Charlie 2
John 1
Paul 3
My plan was to store them in an array, but I can't think how to do it. In python, I would just make a list of tuples, what is the best way to do this in VBA?
Currently We enclosed a Workbook (with exiting VBA code) In this workbook 3 sheet exit (Edit, Details, Summary)
In Details Sheet store Detail Entry of Invoice & in Summary Sheet we store all generated Invoice details in summary form
We want new VBA or correction in existing VBA.
My Exiting VBA work following..
When Enter Invoice Number in Edit Sheet (Cell B2) then Display Entered Invoice Data
First Code Find Invoice Number in Summery Sheet if Invoice Number found then Record Display of Selected Invoice
Here we Edit As per our requirement then We Press Y in Edit Sheet Cell C30
If Found C30 "Y" & "Data ok" in E30 then DELETE Selected Invoice Data From SUMMERY & DETAILS SHEETS & COPY THIS EDITED DATA (RANGE A33 TO G33 In Summery Sheet & Range A35 to A60 in Details Sheet)
My Exiting code work perfectly as per above
We want only following thing
Currently when we copy edited data that move to end of sheet We want to Change & same place where data exit previously before edited. Because serial number disturb.
NOTE : in Editing Time is it possible Few Item Delete or Few Item Add
Can I store a value with out storing it in a field? -with the macro ending?
Ex macro1 runs and gets A1.value
Stores the value (Not in a cell)
I later run macro2
Gets the stored value
In a cell I will be having many strings separated by a ";" for ex
columna A
a; b; c; d ; e
f; g; h; i; j; k
how to store this in a macro?
I have a two rows of data one containing names and the other containing corresponding numbers. The names are static and the numbers change on a daily basis. I want to be able to copy the numbers to a static table next to each name on a daily basis (so I can see what the value was a few weeks ago).
Is there anything I can write to do this job?
My thinking was to set a vlookup to grab the data but i'm not sure how this would work because the vlookup would change daily when the numbers change
I have tried to look for this in several websites and have not found the appropiate answers. So i figured one of the Wizards in this board can help me. Right now when I built a macro it has to be dependent to a file. However I like to build a macro button that when I use it, it will actually just work for any given currently open sheet.
View 7 Replies View RelatedI'm sure this is a very easy question, but I have been having trouble finding the answer on this and other forums.
Our macro has a search routine where it looks through a column for particular cell contents. Once those contents are found, we want it to save that cell's location, go do something else, and then return to that location afterwards. How would we go about doing this?
I have a spreadsheet with 5 columns. A1 to A5
Entries are made into columns A2 to A5 but only ever one entry across all cells
If an entry is made into A2 to A5 the I need a "P" to be placed into A1
