Where i want to carry out a find and replace specific to different worksheets.
At the moment i have:
Sub Changeme ()
Dim SH As Worksheet
Dim rng As Range
Dim rCell As Range
Set rng = ActiveWorkbook.Sheets("sheet3").Range("A8:C10")
[Code] ........
Where column A contains the tab name, column B contains what to replace and column C contains the replacement.
Looking for For Loop to loop through 5 specific worksheets in a work book.
Something like this, but can't find right syntax:
For iCounter = 1 to 5
If worksheet.name = "Recap" & iCounter Then
'do stuff
End If
Next iCounter
I need to replace the word "Cheese" hwen it occurs by itself throughout a wb with 20 sheets.
So if "Cheese" encountered in a cell : Replace
If "Cheese PIzza" encountered : Ignore
I have spreadsheet application which have a ton of sheets and macro into it, and i work on devlop and program it , and add new feature and codes
i wana Module_Macro to find and replace lines of vba code and replace it with lines of codes .
i know ,i should use vbide and vbcompnent , but i dont know from where to start ?
After much fretting over this (and many other Excel issues), I've decided to seek out some assistance. I've included an example with columns, because I'm not very fluent in Excel terminology.
View 5 Replies View RelatedI have an excel workbook where some sheets have a column called "Name" in Row 3. The column where "Name" appears shifts based upon other criteria so it's not set within 1 specific column.
The real data for the "Name" column starts in Row 5. Is it possible to create a macro that looks in Row 3 for "Name", then once it finds that column, it does a find and replace from Row 5 to the end of the data and replaces every space with a ^.
For example, if I have:
Row 3 Name
Row 4
Row 5 John Smith
Row 6 Jane Doe
Row 7 John Doe
Row 8 Jane Smith
I'd like the data to become:
Row 3 Name
Row 4
Row 5 John^Smith
Row 6 Jane^Doe
Row 7 John^Doe
Row 8 Jane^Smith
I'm using Excel 2010 if that impacts anything.
I have a column of references I wish to standardize. Contained within a general text description there is also an order-specific reference number, which is not relevant for my purposes. I wish to find all of these numbers and replace them with nothing (i.e. retain the rest of the description).
The reference numbers are always in the format "P#####/##". Unfortunately these references are in the middle of the text field, not at the start or end, so I can't use a LEFT or RIGHT formula to delete them.
Once these reference numbers have been deleted I will then be able to filter for unique records only. When I do this at the moment the filtering has no effect due to these specific reference numbers.
I need a macro that will look for a specific text string in the tab names of the workbook and replace it with a new specified text string (leaving the rest of the existing tab names). In other words, a simple find/replace but applied to all tab names in the workbook rather than cells. Ideally, I'd like it to pop up something and ask for the text to find and the text to replace it with, so I don't have to edit the macro itself each time I want to use it, but editing the macro each time is fine. Either way will be wonderful.
View 9 Replies View RelatedIn my attached file, I've atttached a sample whereby in Sheet1 to Sheet3 I have data with the same format.
I want to copy all data with TD_SUB_ACNT_CODE = ETMY0100 into Sheet4. My actual data actually have more than 10 sheets and the sheet count can be more.
I have a worksheet with several columns. I need a formula to search column D only and each time a specific location is identified to replace that location with alternate text. Example (ORIGNAL TEXT):
Column Dtext to text help.xlsx
BIRD
FISH
DOG
BAT
BUG
I need to search that listing and each time the word BIRD is mentioned have it replaced with FEATHERS and each time DOG is listed have it replaced with TAILS Final result would look like:
FEATHERS
FISH
TAILS
BAT
BUG
All other text should stay the same and replacement text should appear in the cell of the text it is replacing. This is a sheet used by multiple people several times a day and so the Find/Replace option really won't work.
Have working on this for at least 6 months and it just isn't going to happen for me. I thought I could use a Conditional format, but that is producing no results either.
This problem has come up fairly frequently lately, and I'm not sure how to fix it, or if this is by design...but in Excel 2003 I can't seem to do a "Find and Replace" based on the value of a cell. I can do a find, based on cell value, but the moment I change to the replace tab, the "values" and "comments" are missing from the "look in" dropdown.
I've only noticed this when I'm trying to replace on a filtered list, so I'm not sure if that is part of the issue.
Perhaps an alternative way of arriving at the same goal. Basically I have a worksheet with a number of filtered columns. They are filtered just right, using custom filtering, and so I do not want to undo the filters. In some columns I have formulas that are returning #VALUE! errors. I'd like to replace all of these cells with NA.
I wrote a macro to loop through all of the worksheets in a work book and print all of the sheets except the first one labeled as "BidCandidates" and the last sheet labeled as "Blank".
It works just fine. However, I want it to work even when there is no first sheet labeled as "BidCandidates" and last sheet labeled as "Blank". There will be an unknown number of sheets to print and they will all have a label starting with a number from "02" through "50". For Example "02 - Selective Demolition".
Here is the code I have written;
Sub Print_All_Analysis_Sheets()
'
' Print_All_Analysis_Sheets Macro
'
'
Application.ScreenUpdating = False
Sheets("BidCandidates").Select
ActiveSheet.Next.Select
[Code]...
I am trying to figure out a way to do the following: I have multiple worksheets with 2 columns of data. The data contains name and value, so 2 columns is all I would be looping through.
I need to loop through the multiple worksheets and add any values that are similar to the particular name.
I'm trying to loop through all visible worksheets and then when im those worksheets, I want to run a simple macro.
Here's the code I have:
Sub formatting()
Module10.Part5
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
Module12.Part6
Next ws
End Sub
The problem I'm encountering is that the macro(Module12.Part6) keeps running in the ActiveSheet (the sheet i have open) and isn't actually looping through the worksheets.
Is there any easier or better way to apply a macro to all visible worksheets?
I recently became owner of a spreadsheet with some issues, and I am trying to make it useful. Each row has a URL of a blog post, and I want to extract the date from it (which is present in each URL) while getting rid of the rest of the URL. I was able to get rid of everything up to the year (which comes first), but then the URL continues, for example, 2013/05/16/the-rest-of-the-url/ and I would like to just have 2013/05/16 remain.
I am trying to use find and replace with the find box reading 2013/??/??/*/ and replacing it with 2013/??/?? which effectively erases everything else in the url, but leaves ?? instead of the numbers. Is there any way to have it so that it keeps whatever was in the original box?
[Code] .....
Trying to repeat a 550 or so character statement with a find/replace however I am getting type mismatch errors. When I use a smaller message in the "replace" it works.
I need it to post a message exactly as long as what I have in there. How do I get it to work?
Need assistance with the code for catching errors when using the find / replace function in excel? In particular, I am trying to write code to break to an error message when the value or string searched for isn't found in the find / replace. At the minute I have just copied the standard code using a macro and all this does is return a message box saying X entries replaced.
View 3 Replies View RelatedWhy wont this loop thru all worksheets? It seems it runs worksheet named "Monday Wk (1)" for each sheet and no others.
View 9 Replies View RelatedI am trying to create a macro where it finds a a certain word in a column for example C. What i want it to do is find anything that says FWD_EUR and then replace that cell (e.g C2) with CASH_EUR_FWD and after it has done that it replaces the adjacent cell (e.g. D2) with EUR_FWD. I then want this to do the same with FWD_USD to CASH_USD_FWD and adjacent cell to USD_FWD.
View 2 Replies View RelatedThe code should go through each worksheet and if the row in column A has a null value or 0, then delete the row. The count is based off of column T. The row deletion portion of the code works, but something is wrong with my worksheet looping structure.
View 5 Replies View RelatedCode to loop through worksheets 1 to 3 only and perform a certain task, and how to define the variables i.e. worksheets 1 to 3 when I am not using actual sheet numbers, but tab names. (worksheet 1 to 3 is just the positionof each tab).
What i need the code to do is perform a task on the first sheet, loop to the next sheet, perform the same task, until it has done the 3rd sheet.
The problem with the code below is that it re-prompts the input box for each worksheet that the macro runs through.
What I would like to happen is the Input box appear at the begin, and that value is stored and then the same value pasted into A2 on each worksheet.
Code:
Dim ws As Worksheet
For Each ws In Worksheets
Rows("1:1").Insert Shift:=xlDown
[Code]....
I'm getting an "Invalid or Unqualified Reference" error at the 'division=.cells' line when I try to go through each worksheet and paste some info from there onto a summary sheet. I know there is probably a simple solution that I am oblivious to.
Code:
For Each sheet In ThisWorkbook.Worksheets
i = 1
division = .Cells(2, 1)
[Code].....
I am trying to write code that will loop through one sheet, fill an array and then use that array to populate cells in another sheet. I have a sheet with group names in column A, then in column B through Column IV there are the members of that group. There may be no members in a group or every cell through Column IV could contain data. I need to loop through each row, one at a time, see if a cell contains data, if it does, put it in the array, if it's empty then the array is done for that row. I then need it to go to another sheet and dump that data, however, now it needs to drop it in five consecutive cells in a row, then drop to the next row for the next five cells, etc.
Once this is done it then goes back to the first sheet, drops to the next row nad starts over.
I know how to loop through the rows, I just am not sure how to fill an array using variables for rows and columns. i.e., I can't say fill array with b1 to b30 instead I have to say fill array with intRow,intFirstColumn through intRow, intLastcolumn.
Is there a way to make a macro convert '1' to Yes and '0' to No? I have 2 columns (F and G) in a worksheet that contain the value of 1 or 0, but I need to convert them to Yes or No. I have tried some fo the samples but they pop up a msgbox which is not required.
View 2 Replies View RelatedRange B3:B1000 is text strings. Column C2:C50 is a list of words that I would like to "Find" in Column B and replace with it's lowercase values unless they start off the string.
Example
Find all occurences of And or AND and replace with and
Find all occurences of With or WITH and replace with with.
Find all occurences of Or or OR and replace with or
I'd heard that using FIND might make macros run faster than looping. Below is the code I'm currently using. There are two worksheets. The first has a column containing numbers and a blank column to insert the associated code. Sheet two has a list of unique numbers with the associated code. Presently I used a nested loop to populate the code column of the first sheet. As sheet 1 contains in the neighborhood of 25,000 rows it can take quite a long time to run using the loop
Option Explicit
Sub BWRawCoding()
Dim wb As Workbook
Dim wsPT As Worksheet, wsAgg As Worksheet
Dim RowsPT As Integer, RowsAgg As Integer
Dim LoopPT As Integer, LoopAgg As Integer
Set wb = ActiveWorkbook
Set wsPT = wb.Worksheets("Graphical Data -RAW")
Set wsAgg = wb.Worksheets("agg")
RowsPT = wsPT.UsedRange.Rows.Count
RowsAgg = wsAgg.UsedRange.Rows.Count
For LoopPT = 2 To RowsPT
For LoopAgg = 2 To RowsAgg
If wsPT.Cells(LoopPT, 6).Value = wsAgg.Cells(LoopAgg, 2).Value Then
wsPT.Cells(LoopPT, 24).Value = wsAgg.Cells(LoopAgg, 1).Value
End If
Next LoopAgg
Next LoopPT
End Sub
I am trying to provide a search string and then loop round searching for this search string until the beginning find cell is found again however I am having problems making my code work - here it is:
View 2 Replies View RelatedI have a set of data and I need to find the max for range 1-10, then 2-11, then 3-12 and so on. Is there away to do this using a loop. I'm new to vba and I've been trying but either it doesn't work or I get an error message.
View 8 Replies View RelatedThe following macro searches Sheet1 for a value in a user defined textbox. When it finds the value it copies the row and and pastes the row in another sheet and then loops. My problem is i need to add a "do until" so that i will stop. I just don't know what code to add after the "until" to have it search the sheet once and then stop. Right now it will repeat infinitly. I need to know how to get it to stop once it looks through all the cells once. My current code is:
Private Sub CommandButton1_Click()
Do
Sheets("sheet1").Activate
Application.CutCopyMode = False
Cells.Find(What:=TextBox1, After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByColumns, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Select
ActiveCell.EntireRow.Copy....................