I'm getting an "Invalid or Unqualified Reference" error at the 'division=.cells' line when I try to go through each worksheet and paste some info from there onto a summary sheet. I know there is probably a simple solution that I am oblivious to.
Code:
For Each sheet In ThisWorkbook.Worksheets
i = 1
division = .Cells(2, 1)
[Code].....
I have 3 worksheets:
Lets call them RED, BLUE AND GREEN
Essentially GREEN pulls Values from BLUE and BLUE pulls Values from RED. Red being the base worksheet from which everything is calculated.
In my GREEN workbook I have the following =MIN('BLUE'!H14,'BLUE'!L14)
And this will work fine.....Until I press a clear Worksheet button that has been implemented on the RED worksheet (button was not implemented by me and I do not wish to edit anything with respect to that button)
When RED is reset the #REF! Error will appear in GREEN. This is fine because it cant find any values From BLUE. However when I do input new values into RED, which in turn updates BLUE which is where GREEN in theory should then be able to pull the results from.... But it just stays with a REF! error.
Is there anyway i can permanently set a CELL to have the following code =MIN('BLUE'!H14,'BLUE'!L14), no matter what happens to other cells?
I wrote a macro to loop through all of the worksheets in a work book and print all of the sheets except the first one labeled as "BidCandidates" and the last sheet labeled as "Blank".
It works just fine. However, I want it to work even when there is no first sheet labeled as "BidCandidates" and last sheet labeled as "Blank". There will be an unknown number of sheets to print and they will all have a label starting with a number from "02" through "50". For Example "02 - Selective Demolition".
Here is the code I have written;
Sub Print_All_Analysis_Sheets()
'
' Print_All_Analysis_Sheets Macro
'
'
Application.ScreenUpdating = False
Sheets("BidCandidates").Select
ActiveSheet.Next.Select
[Code]...
I am trying to figure out a way to do the following: I have multiple worksheets with 2 columns of data. The data contains name and value, so 2 columns is all I would be looping through.
I need to loop through the multiple worksheets and add any values that are similar to the particular name.
I'm trying to loop through all visible worksheets and then when im those worksheets, I want to run a simple macro.
Here's the code I have:
Sub formatting()
Module10.Part5
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
Module12.Part6
Next ws
End Sub
The problem I'm encountering is that the macro(Module12.Part6) keeps running in the ActiveSheet (the sheet i have open) and isn't actually looping through the worksheets.
Is there any easier or better way to apply a macro to all visible worksheets?
Why wont this loop thru all worksheets? It seems it runs worksheet named "Monday Wk (1)" for each sheet and no others.
View 9 Replies View RelatedThe code should go through each worksheet and if the row in column A has a null value or 0, then delete the row. The count is based off of column T. The row deletion portion of the code works, but something is wrong with my worksheet looping structure.
View 5 Replies View RelatedCode to loop through worksheets 1 to 3 only and perform a certain task, and how to define the variables i.e. worksheets 1 to 3 when I am not using actual sheet numbers, but tab names. (worksheet 1 to 3 is just the positionof each tab).
What i need the code to do is perform a task on the first sheet, loop to the next sheet, perform the same task, until it has done the 3rd sheet.
The problem with the code below is that it re-prompts the input box for each worksheet that the macro runs through.
What I would like to happen is the Input box appear at the begin, and that value is stored and then the same value pasted into A2 on each worksheet.
Code:
Dim ws As Worksheet
For Each ws In Worksheets
Rows("1:1").Insert Shift:=xlDown
[Code]....
Looking for For Loop to loop through 5 specific worksheets in a work book.
Something like this, but can't find right syntax:
For iCounter = 1 to 5
If worksheet.name = "Recap" & iCounter Then
'do stuff
End If
Next iCounter
I am trying to write code that will loop through one sheet, fill an array and then use that array to populate cells in another sheet. I have a sheet with group names in column A, then in column B through Column IV there are the members of that group. There may be no members in a group or every cell through Column IV could contain data. I need to loop through each row, one at a time, see if a cell contains data, if it does, put it in the array, if it's empty then the array is done for that row. I then need it to go to another sheet and dump that data, however, now it needs to drop it in five consecutive cells in a row, then drop to the next row for the next five cells, etc.
Once this is done it then goes back to the first sheet, drops to the next row nad starts over.
I know how to loop through the rows, I just am not sure how to fill an array using variables for rows and columns. i.e., I can't say fill array with b1 to b30 instead I have to say fill array with intRow,intFirstColumn through intRow, intLastcolumn.
here's a simple discription of what I would like to do:
I have two worksheets open, SHEET1 and SHEET2
In SHEET1 I have numbers 1,2,3...10 running in cells A1.....A10
What I would like to do is add up a certain range of rows in
SHEET1 from target values I place in SHEET2
example:
in SHEET 2:
A1 = 3 ( I insert begining row )
A2 = 5 ( I insert last row )
A3 = equation to add up rows 3 to 5 in SHEET1, ie: A3+A4+A5
What is the equation I should put in A3? This driving me nuts!!
in sheet1 i have a list of names in column B. in the next columns(C to H) i have some numerical data about them. in sheet2 i want to keep only the names and the data in column H. all works fine except... if i insert another line in sheet1 the data in that line is not inserted in sheet2. and if i remove a line in sheet1 i get a ref error in sheet2. what can i do so the new data is inserted correctly?
View 4 Replies View RelatedWhere i want to carry out a find and replace specific to different worksheets.
At the moment i have:
Sub Changeme ()
Dim SH As Worksheet
Dim rng As Range
Dim rCell As Range
Set rng = ActiveWorkbook.Sheets("sheet3").Range("A8:C10")
[Code] ........
Where column A contains the tab name, column B contains what to replace and column C contains the replacement.
I need to set up a system for recording data into a certain way.
I a currently using this formula =IF(sheet1!A1:A20="H","Y","") and it kind of works.
Basically i want it to fill a cell in sheet2 with a "Y" if ony one cell between A1 and A20 from sheet1 contain a H. At the moment it only works if a few of the cell between A1 and A20 contain "H".
Trying to write a macro that will reference one cell in about sixteen different worksheets and return the value of each of those cells. Is there an easy way to do this?
ie.
For n = 1 To n = 15
Worksheet(n + 1).Cell("A1")
Return A1
I know this isn't even close to the right code but this should give you an idea of what I'm trying to do.
I have three different sheets, each with a column of names, titled "list1, list2, list3." I also have a fourth list of names on a sheet titled "masterlist." I am wondering if there is any way I could cross check the three lists against the master list to see if any names appear on the master list but do not appear on any of the three lists. Is there any way I can cross reference the master list with each of these lists?
View 2 Replies View RelatedI'm trying to optimize code by avoiding activating other worksheets, but I'm running into a problem with a match function.
I'm using a workbook called "Template" and then opening another workbook called "DCP" and trying to use the match function to figure out what row data is on. I can get this first line of code to work:
HTML Code:
MatchedRowNumber = WorksheetFunction.Match(Combo, Sheets("Sheet1").Range("A:A"), 0)
However for that to work, I have to activate the other workbook. I want to avoid that and stay within the "Template" workbook. I think I need something like this:
HTML Code:
MatchedRowNumber = WorksheetFunction.Match(Combo, DCP.Sheets(DCPSheet).Range("A:A"), 0)
That one however doesn't work... looks like I have the wrong syntax.
Below is an excerpt for the code in case something is wrong with how I set the variables.
HTML Code:
Sub StockOrderByDCP()
Dim Template As Workbook
Dim DCP As Workbook
Dim MSS As Worksheet
Dim DCPSheet As Worksheet
[Code] ..........
I'm reading data, from specific cells off a closed workbook. When the sheet that needs said cell data is activated, it automatically opens the workbook and references the sheet nessecary. The issue I've come across, is I now need to access another workbook (Easy to open) with 12 sheets 1 for each month, and only read from the worksheet of the actual Month...
Kind of lost on how to possibly make this work. I basically need something like:
=location/[workbook.xls]Month(Today())!cell
I'm having trouble calling a defined range within a VLOOKUP function in VBA. If the named range is located on the same sheet within which you are running the macro, everything runs fine and all is well in the world.
However, after I relocated the range to a separate sheet (a 'SourceData' sheet to tidy up the user interface sheet), I was getting the following error message:
Method 'Range' of object '_Worksheet' failed
The name is correctly defined - Range("DaysInYear").Select still picks up the correct selection - it's just the VLOOKUP will no longer function correctly.
Here is part of the macro's
For I = 1 To NumberOfDays
Range("A1").Value = DateAdd("d", -(I - 1), EndDate)
If Application.VLookup(Range("A1"), Range("DaysInYear"), 3, False) = 1 Then
If Application.VLookup(Range("A1"), Range("DaysInYear"), 4, False) = 0 Then
ActualNumber = ActualNumber + 1
End If
End If
Next I
I have 2 workbooks, A (source) and B (destination).
Workbook A has 1 sheet named 'master' and has 10 columns a:j
I would like to copy a range of data in worksheet 'master' for entire 10 columns while the cell value (moving down worksheet) of the next cell in column A is greeater than the current cell. eg. if cell values of range a1:a6 = 1 then cell value a7 =2, then copy range a1:j6 to workbook B in sheet 'r1'.
Then I would like to go back to Workbook A sheet 'master' and begin process again starting from where it left off at a7.
I have a macro in which i am taking information from one cell and puting it in to a text box but need to repeat this process from B1 to C1 to D1 etc here is what I have so far.
View 2 Replies View RelatedIm using this to loop through ID's for my code.
Sub Test2()
' Select cell A2, *first line of data*.
Range("A2").Select
' Set Do loop to stop when an empty cell is reached.
Do Until IsEmpty(ActiveCell)
' Insert your code here.
' Step down 1 row from present location.
ActiveCell.Offset(1, 0).Select
Loop
End Sub
How can I set a cell value = to what cell I the loop is currently on?
we have a Excel 2010 worksheet containing multiple tables.
Table1
ColumnA ColumnB
1 Blue 12
2 Orange 14
15
11
3 Red 10
Table2
ColumnA ColumnB
1 Blue 11
2 Black 13
15
11
3 White 10
19
17
On a separate worksheet we want to calculate with the first worksheet's values.
For example: Calc1: Sum ColumnB IN Table1 WHERE ColumnA = Orange
How do we do such a calculation/formula?
Here is a formula I am trying to use to access another woorksheet to compare the values in J13 in each worksheet.
=IF(J13=INDIRECT("'"&$O$4&"'!"&"J13"),"▬",(IF(INDIRECT("'"&$O$4&"'!"&"J13")=" ","▬",(IF(J13=" ","▬",(IF(J13>INDIRECT("'"&$O$4&"'!"&"J13"),"▼","▲")))))))
Where O4 contains the name of the first worksheet.
I want the formula reference [J13] to chage to J14, J15 and so on.
I'm dealing with a DDE link and have a cell that works when I type in the value =WINROS|AVEVOL!XOM . But I don't want to manually enter each value. So I have tried to use =INDIRECT("WINROS|AVEVOL!" & A2) where A2 contains the value 'XOM', but I get a #REF! error.
View 9 Replies View RelatedWarhammer Quick Reference Desktop.xlsx
Its on book 2.
I'm trying to reference the Cryptek total that I got in the previous area, and put that result into the grand total army point formula. When I reference the solution cell, or even copy and paste the very same equation into it, and then proceed to filter the referenced cells change...
The obvious solution that i thought would work is write =D45 next to Cryptek in the point value column, then if I filter it SHOULD maintain the information from D45 except it doesn't.
On the spreadsheet Im creating I am using cell referencing. The user will input data into the blank cells, and cell referencing will put them into another table. Then I add these using an IF(OR(ISBLANK formula.
However, the empty cells come through as 0's rather than a blank cell. As they're coming through as 0's, they're being calculated into the formula, and this is causing problems in my main table.
Is there a formula I can use to ensure that the empty cells being copied over do not give off any other value?
I tried to use a few different IF formulas to only let specific data go through, but it didn't work. I tried to have the blank cells produce a letter so that they wouldn't be calculted in the formula, but letters are also counted as measured values.
I have a row with month titles. I manually fill this with data as the year progresses. I need to automatically use the last month updated in the row in a formula. i.e. theformula is in one cell and calculates on the last figure in the row e,g, data is in january (say C3) - when I input Feb data in C4, I want the formula to automatically reference the last complete cell (ignore january data and calculate on Feb data), and so on through the year.
I'm trying to grab data from two sheets by first doing a match. The match works, but how can I now reference ws2 so that I can pick up data if this match is true?
View 2 Replies View Related
