Fill Array By Looping Worksheets

Aug 23, 2007

I am trying to write code that will loop through one sheet, fill an array and then use that array to populate cells in another sheet. I have a sheet with group names in column A, then in column B through Column IV there are the members of that group. There may be no members in a group or every cell through Column IV could contain data. I need to loop through each row, one at a time, see if a cell contains data, if it does, put it in the array, if it's empty then the array is done for that row. I then need it to go to another sheet and dump that data, however, now it needs to drop it in five consecutive cells in a row, then drop to the next row for the next five cells, etc.

Once this is done it then goes back to the first sheet, drops to the next row nad starts over.

I know how to loop through the rows, I just am not sure how to fill an array using variables for rows and columns. i.e., I can't say fill array with b1 to b30 instead I have to say fill array with intRow,intFirstColumn through intRow, intLastcolumn.

View 6 Replies


ADVERTISEMENT

Looping Controls In To An Array

Oct 20, 2008

I have a userform that as lots of text boxes on.

The text boxes are called "pos1" & "skill1" the number ranges up to 18.

I am trying to put the contence of the boxes on a worksheet using a loop so the 1 will change to 2 and so on.

How do I go about seting the loop up so it changes the name of the control each time.

View 9 Replies View Related

Looping Through Contents Of Array?

May 28, 2012

I have stored the contents of a worksheet table to an array, thus:

Code:
Public TeamArray() As Variant
Sub StoreTeamsToArray()
Dim NoOfTeams, NoOfColumns As Integer

[Code]....

The first column of the array contains team names, the second represents a colour that will be used for the background of a cell, the third represents the colour that will be used for the font of a cell.

What I now want to do is cycle through the first column of the array to see if the value contained within it matches the value contained in another variable ("Team"), then store the corresponding values from the second and third columns to other variable names ("BackgroundColour" and "FontColour".

View 2 Replies View Related

Looping If Function Through Array?

Jan 9, 2014

I have a big macro that runs whenever there is a change made. I'm not gonna link it all because I don't think that would be useful... This macro does:

1. Disables Events.
2. Removes Protection
3.Calls some macros that check a few values and change a few cells.
4. Activates events.
5. Hides or shows ranges of cells depending on the results of the called macros.
6. Reactivates protection.

As well as the cells the called macro changes, there is a column of True/False results stretching from AE16 to AE491 with several blanks in the list as well. (All of this is decided upon a different macro that isn't linked with the change.) I want a loop that will read the True/False column and if it finds a false, make 8 buttons invisible.

I tried putting this code between Step 5 and 6 of the macro.


Code:
Dim J As Integer
J = 16
Do

[Code].....

This isn't working at all... I was thinking if there was gonna be an issue then it would be the opposite where it stops the buttons appearing all together but even when there are falses and I am changing things it doesn't seem to make a difference.

View 3 Replies View Related

Looping Through Worksheets

Oct 19, 2012

I wrote a macro to loop through all of the worksheets in a work book and print all of the sheets except the first one labeled as "BidCandidates" and the last sheet labeled as "Blank".

It works just fine. However, I want it to work even when there is no first sheet labeled as "BidCandidates" and last sheet labeled as "Blank". There will be an unknown number of sheets to print and they will all have a label starting with a number from "02" through "50". For Example "02 - Selective Demolition".

Here is the code I have written;

Sub Print_All_Analysis_Sheets()
'
' Print_All_Analysis_Sheets Macro
'
'
Application.ScreenUpdating = False
Sheets("BidCandidates").Select
ActiveSheet.Next.Select

[Code]...

View 6 Replies View Related

Looping Through Worksheets?

Aug 7, 2008

I am trying to figure out a way to do the following: I have multiple worksheets with 2 columns of data. The data contains name and value, so 2 columns is all I would be looping through.

I need to loop through the multiple worksheets and add any values that are similar to the particular name.

View 9 Replies View Related

Looping Through Worksheets In VBA

Jul 2, 2009

I'm trying to loop through all visible worksheets and then when im those worksheets, I want to run a simple macro.

Here's the code I have:


Sub formatting()

Module10.Part5
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets

Module12.Part6

Next ws

End Sub
The problem I'm encountering is that the macro(Module12.Part6) keeps running in the ActiveSheet (the sheet i have open) and isn't actually looping through the worksheets.

Is there any easier or better way to apply a macro to all visible worksheets?

View 9 Replies View Related

Loop Thru Worksheets Not Looping?

Aug 12, 2009

Why wont this loop thru all worksheets? It seems it runs worksheet named "Monday Wk (1)" for each sheet and no others.

View 9 Replies View Related

Looping Array Formula For Multiple Rows

Apr 4, 2014

I wanted to do a multiple return vlookup so I used an Index formula. I have account names and am trying to vlookup contacts associated with those accounts (4 max). So I have a list of Accounts all with 3 blank rows in between them.

How do I loop an array formula? So far I have the code..

[Code] .....

This finds the 4 contacts associated with the first account in C5 which I named the cell "myVar". I now want it to find the contacts associated with the accounts in C9, C13, C17 and so on until the first empty cell.

View 8 Replies View Related

Count Indexes In Integer Array With Value > 0 Without Looping

Jul 5, 2012

Is it possible to count the number of indexes in an integer array that have a value > 0 without looping through the array? I found something using Filter, but that only appears to work on string arrays.

View 2 Replies View Related

Looping Through Worksheets: Null Value Or 0, Then Delete The Row

Jan 5, 2010

The code should go through each worksheet and if the row in column A has a null value or 0, then delete the row. The count is based off of column T. The row deletion portion of the code works, but something is wrong with my worksheet looping structure.

View 5 Replies View Related

Looping Through Worksheets - Define Variables

Oct 19, 2011

Code to loop through worksheets 1 to 3 only and perform a certain task, and how to define the variables i.e. worksheets 1 to 3 when I am not using actual sheet numbers, but tab names. (worksheet 1 to 3 is just the positionof each tab).

What i need the code to do is perform a task on the first sheet, loop to the next sheet, perform the same task, until it has done the 3rd sheet.

View 1 Replies View Related

VBA Store Input Box Value Before Looping Through Worksheets?

Feb 4, 2014

The problem with the code below is that it re-prompts the input box for each worksheet that the macro runs through.

What I would like to happen is the Input box appear at the begin, and that value is stored and then the same value pasted into A2 on each worksheet.

Code:

Dim ws As Worksheet
For Each ws In Worksheets
Rows("1:1").Insert Shift:=xlDown

[Code]....

View 2 Replies View Related

Referencing Cell When Looping Through Worksheets?

Jun 10, 2014

I'm getting an "Invalid or Unqualified Reference" error at the 'division=.cells' line when I try to go through each worksheet and paste some info from there onto a summary sheet. I know there is probably a simple solution that I am oblivious to.

Code:
For Each sheet In ThisWorkbook.Worksheets
i = 1
division = .Cells(2, 1)

[Code].....

View 6 Replies View Related

Looping Through Specific Worksheets In A Workbook

Oct 27, 2007

Looking for For Loop to loop through 5 specific worksheets in a work book.

Something like this, but can't find right syntax:

For iCounter = 1 to 5
If worksheet.name = "Recap" & iCounter Then
'do stuff
End If
Next iCounter

View 4 Replies View Related

Looping Through Specific Worksheets - Find And Replace

Mar 7, 2013

Where i want to carry out a find and replace specific to different worksheets.

At the moment i have:

Sub Changeme ()
Dim SH As Worksheet
Dim rng As Range
Dim rCell As Range

Set rng = ActiveWorkbook.Sheets("sheet3").Range("A8:C10")

[Code] ........

Where column A contains the tab name, column B contains what to replace and column C contains the replacement.

View 8 Replies View Related

Selecting Worksheets Array When #of Worksheets Will Vary

Apr 26, 2006

How do I modify this macro so that the worksheet array will select all the worksheets except sheet 1?? My workbooks will have varying numbers of worksheets ...

View 3 Replies View Related

Fill Listbox With Array Of Folders

Jan 26, 2010

(Modifying some code by Leith Ross) I am stumbling why I get an error trying to fill the listbox with folder names. (See code in red for error location) ....

View 9 Replies View Related

Fill Array To Execute Loop?

Apr 25, 2014

how to fill array with cells form selections and loop my macro for each cell of that array.

Code:
'this is macro I need to execute for each cell in my selection. Here I threat each cell from selection as solo selection.

Sub SELECTION_CELL_COUNT_SINGLE()
Dim z As Integer, q As Integer, X As Boolean, I As Integer, txt As String
Dim tmp As String, J As Integer, K As Integer
Dim sStrip As String

[Code]....

View 1 Replies View Related

Fill ComboBox With 2 Dimensional Array

Oct 9, 2004

I can set up a 2 dimensional array by using

array = Workbooks("Workbook.xls").Worksheets("Data"). Range("D_all")

as range D-all contains 2 columns and 20 rows

I can send that list to a combo box by using

Me.ComboBox1.List() = array

If I have ColumnCount set to 2 then both columns will be listed

If I have ColumnCount set to 1 then the 1st part of the array will be listed

But how do I list just the 2nd part of the array

View 8 Replies View Related

Fill Array Variable From Range

Jun 14, 2008

I've created a userform that uses parallel arrays to display strings that another macro pulls from a worksheet and the 2nd array holds strings of what the user types in. I've uploaded a workbook with the userform in it.

Part 1:
I want to pass the 1st array (pSource) in during the initialization of the array and I want to send back the 2nd array (pUser) from the submit button, but I have no idea how to work it. I've tried a couple things from older posts in the forums, but had no luck with them.

Part 2:
The arrays will be the same size, but the size isn't a constant. Is there any way to change the size of an array? I've been using 0 to 3 for testing the rest of the userform, but for the final product, I'll be passing an array in of a variable size.

Private pSource(3) As String 'Modify to work with variable size
Private pUser(3) As String 'Modify to work with variable size

View 3 Replies View Related

Vba Fill In From Cell Above Over 2 Worksheets

Jan 14, 2010

I'm looking at filling in a cell value from the cell above in column A but over a range of worksheets. It only needs to fill down until the last used row.

The last used row in the worksheet will vary for each worksheet .. but the longest column will be column T or U.

this code "works" but only for the active sheet... i'm sure its something easy to adjust.

Sub CopyDataDown()
' ---
Dim ws As Worksheet
Dim Lr As Long

Application.ScreenUpdating = False

For Each ws In ActiveWorkbook.Worksheets
If ws.Name "Notes" _
And ws.Name "FrontSheet" Then
Lr = WorksheetFunction.Max(Range("T" & Rows.Count).End(xlUp).Row, Range("U" & Rows.Count).End(xlUp).Row)
With Range("A2:A" & Lr)
.SpecialCells(xlCellTypeBlanks).FormulaR1C1 = "=R[-1]C"
.Value = .Value
End With

End If
Next ws
Application.ScreenUpdating = True
End Sub

View 9 Replies View Related

Fill Array With Userform ComboBox Names

Apr 13, 2009

Is it possible to count the number of comboboxes on a userform? Or better yet can I fill an Array with all the combobox names on a userform? I can count the controls on a userform but I'm trying to count just the comboboxes? Instead of all the labels and textboxes and frames.

I would like to loop through them for validation instead of doing it by each one by itself!

View 9 Replies View Related

Fill Range From Multi-dimensional Array

Jul 20, 2007

I searched and found a few posts about transposing arrays into a range of cells, but none of them seemed to solve my problem. So, my problem is, I have a .Net assembly which provides various functions to allow Excel to access our Oracle DB stored procedures/tables, etc. This assembly is exposed via COM Interop. I call the GetSPINTypes() method, which returns me a list of type pairs (ID, Name), in a CSV string format.

I split the CSV into rows, and then put each row into a 2-dimensional array.
I then need to dump that array into one of my sheets in Excel, so I try to do the usual Range.Value = Array, but this sometimes tells me there is a type mismatch, and most times just doesn't fill the range. I've checked my arrays in the watch window, and they have definitely been filled in correctly, the values just don't appear when they are put into the sheet. See the code I'm using below:......

View 4 Replies View Related

Fill MultiColumn Listbox With Part Of Array

Sep 21, 2007

I have a multicolumn listbox, and a multidimensional array.

I want to put just SOME values of the array into the listbox, but I ger errors using both .list or .column to access single items, and even using .additem .

I have:
dim variable(2000,2) as string
variable(1,0)="aaa": variable(1,1)="bbb": variable(1,2)="ccc"
variable(2,0)="www": variable(2,1)="awasd": variable(1,2)="asdfa"
....
variable(2000,0)="www": variable(2000,1)="awasd": variable(2000,2)="asdfa"

I don't want to store all 2000 elements, just some ones: how can I do it?

View 9 Replies View Related

Fill & Rearrange Multi-dimensional Array From Another

Feb 26, 2008

I've got the folowing array's

date1>company1>price
>Company2>price
>company3>price
>enz

Date2>company1>price
>company2>price
>enz

enz.

But these are not the array's that i need for a correlation that i want to make.
Is it possible to transform the array's above to an array such as:

Company>date1>price
>date2>price
>date3>price
>enz

View 5 Replies View Related

Fill Combobox From Multiple Worksheets

Aug 24, 2007

I have a combobox that I populate this way:

' Sets Names in ComboBox1 Contents
With Worksheets("Sheet1")
Set rng = .Range(.Cells(1, "A"), .Cells(Rows.Count, "A").End(xlUp))
End With
With ComboBox1
.RowSource = rng.Address(external:=True)
End With

What I have are 4 sheets one of which has 3 columns that I need to combine into one "Master" drop down, is that possible?

Sheet1 - Column A
Sheet2 - Column A, B and C
Sheet3 - Column A
Sheet4 - Column A

View 3 Replies View Related

Automatically Fill Information Across Worksheets

Aug 1, 2008

I have created a spreadsheet that I must fill out daily. this worksheet has averages that must be automtically shared with a "master" worksheet.

for example
information from sheet2!b23
information from sheet3!b23
information from sheet4!b23
etc...
must automatically be transfered to
sheet1!c6
sheet1!c7
sheet1!c8
etc...
in that order

at this time I am typing in =sheet2!b23 on sheet1 everytime, I want to avoid this.

If you are asking yourself why? I dont blame you but it needs be this way so I can average each days spreadsheet.

View 5 Replies View Related

Fill Array From Range Selecting All Rows And Some Columns

Jul 21, 2014

I want to fill an array from values in range A1:H10. I want to fill the array with all rows in range and only columns B,C and E. I have the code below so far using index function.

Is there a more direct way to select all rows from desired range to avoid the need to create an array of rows from 1 to LastRow and then use Application.Transpose(RowsArr) (in red) inside Index()?

View 3 Replies View Related

Print To Exclude Fill Colors On Worksheets

Oct 7, 2008

The bright colors work well, but when they print the sheet on a laserjet black/white printer, the colors make the data almost impossible to read.

Is there a way to allow them to print the sheets and, by default, not print the background fill colors?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved