I have a couple formulas in action to give me the total number of hours worked from start to finish.
Ex:
A1 - 1:30 PM
B1 - 11:45 PM
C1 - I combined the two to get the total number hours worked but set as time: =IF(B1
VLookups can be used to change letters into numbers, is it possible to turn numbers into letters?
i.e
A-7 =vlookup(A,table1,2,1)
7-A =????
Some of my numbers turn into dates when I try to import them. Is there anyway around this problem?
I have 500k+ rows with data, so looking through each and every cell is not an option.
How do i turn column letters to numbers and vice versa
take y values from column and take x values from row
I have 'resolved' values in column A1:A10
I have 'received' values in row B11:K11
I need to fill out a table using the tables axis values stored in the column and row above.
Is there a way for me to enter numbers in my cells and have them a specific color? I want all my odd numbers to be bold red with a yellow highlighted cell, my even Numbers to be green with a gray color cell.
I want it to look like this 7 and 8. I can not seem to find anything to show the high light but basically the red 7 will be in a yellow box and the green in a light gray. I will be entering rows and rows of anywhere from 4 to 8 digits
I have a workbook which is set up to take an average heart rate of a participant from a series of data points. I have set the spreadsheet up before I have collected some of the data. (so I can review the project at the 3 months period and its an ongoing project).
The problem is that if there is no data in a participants column then excel correctly gives you readout of “#DIV//0!”. On my results page this #DIV//0!” makes it hard to read the spreadsheet. Is it possible to get excel to turn #DIV//0!” to “0” or even turn it to a blank cell?
As you can see on the example i have TEST hours.xlsx, I have a file that calculate the money every doctor should take based on the working hours.
Nights, holidays and holiday night have different price/hour.
The excel is working fine…but now I have to make a formula that separates automatically based on the beginning time and the end time of the doctor’s shift the day hours tha night hours, the holiday hours and the holiday nights hours.
In the excel I have fill the hours Manuscript, I need a formula to do that for me…
On the yellow cell I have try to find out the formula for the holiday hours but because the day is calculated due to a formula it is not working!!!
Simple Example: A doctor Is working from 21:00- 8:00 (next morning Sunday) he should have 1 simple hour (21:00-22:00) 9 night hours (22:00-6:00) and 2 holiday hours (6:00-8:00,)
How do I convert hours into numbers and/or decimals?
Example:
Column A Column B
---------- -----------
30:05:00 to 30.05
26:10:00 to 26.10
262:47:00 to 262.47
Figures under Column B refer to info that I would like to get.
I have an entire column with numbers such as 48, 95, 30 etc representing hours. how do i format cell so that these numbers will show, 2days, 3days-23hrs-45mins, 1day-6hrs
Thought it would be easy enough to just right click and format the cell but doesn't seem to have the option *shrugs*.
In column A I have a date AND time entered. By the way, this is not via cell format, I have manually entered, say today's date and the current time. In column B I have a future date and time.
Basically, column A is the date and time a problem was given to me. Column B would be the date and time I resolved the problem. Now for the formula....Column C needs to spit out whether the problem was solved between 24 and 48 hours OR less than 24 hours OR greater than 48 hours.
can I set a cell in excel so that if a number in a different cell is above a certain number it will turn green and another cell to turn red. I have attached the file.
View 4 Replies View RelatedLunch is not paid. Holiday and vacation hours get calculated at the regular pay rate. Overtime is anything in excess of 8 hours per day and/or in excess of 40 hours per week and/or over 5 working days per week. Saturdays for most the employees will be overtime because it will be their 6th workday of the week; but it will be regular time for one employee as it will only be his 5th workday of the week.
For accounting and payroll purposes, we need the totals to display in both hour and decimal format.
So far, I have Lunch, Regular and Overtime hours figured out, but I still need to work with Saturday, Vacation and Holiday hours. Also, currently, the time in and out has to be typed in with the colon and AM or PM. Is there another way to input the info without having to type in those items? I'm trying to make it as user friendly as possible.
The below formulae allows me to see the difference between two dates and only returns the difference in working hours ie :
Difference between
02/02/2010 08:00 & 03/02/2010 08:00 is 16 Hours 0 Minutes
=(INT(A3)-INT(C6))+MAX(MOD(A3,1)-MAX(MOD(C6,1)))
The following displays it in the Hrs and Mins format
=TEXT(B15,"[h]")&" Hour"&IF(OR(TEXT(B15,"[h]")+0=0,TEXT(B15,"[h]")+0>1),"s "," ")&MINUTE(B15)&" Minute"&IF(MINUTE(B15)1,"s ",""))
I'm attempting to make a simple time sheet for a handful of employees. I'd like to enter the clock in time and clock out time for each day. The end cell should be the running total for the week. The tricky part for me is having the formula subtract an hour for each day that is over 5 hours.
View 3 Replies View RelatedFormat Time Cell For Greater Than 24 Hours: Hours & Minutes Only .....
View 9 Replies View RelatedI'm having difficulty to calculate hours between 2 or 3 days exclude non working hours.
Attached is the example of start date with time & end date with time.
The situation is like "when the case log in till the case assist in working hours." so i will get the hours from case log to case assist.
Testing.xlsx‎
I have been working on a timesheet but the problem I have come across is calculating actual hours worked only in the core hours and any work outside the core hours is calculated in the outside hours column. A standard work day is 7.6 hours working between 8.30am and 5.00pm. However if someone was to commence work either before 6am or after 8pm this is outside of core hours. I have attached an example of my timesheet for you to see what I am talking about.
View 3 Replies View Relatedfind a formula that will calculate the hours between the two below values but only take in to consideration the business hours (from 9 to 17) and exclude any weekends?
08/03/2013 13:32:00
02/04/2013 09:32:50
I have got a formula that can separate day shift hours from night hours, in this case night begins at 7pm to 7am, however the problem is after 12am we get into negative numbers, what formula would fix this and can be combined with the formulas below?
E10 = 19:00 or start of night time hours
B3 = start time
C3 = end time
D3 = day hours workeds =24*IF(E10
A1 is 10 (10 hrs worked) , A2 is 10:30am (in time), A3 is 9:00pm (out time), A4 needs to be the total hours and minutes between A2 and A3 based on the hours listed in A-1. What i need is a formula that will calculate the hours and minutes between the 2 times based on hours entered in A1 but that will also compensate for a manadatory 30 minute lunch that needs to be deducted from the total hours if hrs listed in A1 are more than 6.
example: worked 10HRS, 10:30am to 9:00pm, Total hrs is 10hrs 30min, which should be just 10 since the lunch is a none work time and must be subtracted.
If a person worked more than 6hrs, they must take a lunch. if they worked less, than 6 then they don't have to. I need a calcuation to recognize the greater than, less than factor into the equasion also.
I am making a schedule and I would like it to take out a 30 min break if the hours worked is over 6 hours.
I have so far
A B
1 11:00 7:30
=24*(B1-A1)
Gives me 8 hours, I would like it to subtract the 30 minutes only ifthe sum is over 6 and not alter the sum if it is under 6.
1) The output of an excel duration is : 22.00:8.00:25.00 ( day:hour:minutes ) - excel cannot average and work with this number format
2) resolution - =(LEFT(L2,4))+MID(L2, FIND(":",L2)+1,4)/24+MID(L2, FIND(":",L2,7)+1,4)/1440 as an array and Custom Format the cell as [h]:mm - works perfectly.
Q: to be conistent, the initial reporting is dd:hh:mm and then I convert to hh:mm so that excel can process the data. How can I convert from hh:mm to dd:hh:mm so that the excel report can be consistent in presenting the data to senior management?
example attached.
I am attempting to convert a spreadsheet of times (listed in the format 06:15:39.62, where 06 is the hour, 15 is the minutes, 39 is the seconds, and .62 is in truncated miliseconds) into fractions of hours (so, 6.25 [NOT 6:25!]). I've so far been doing it manually for each value, which is quite tedious (doing basic division of seconds and minutes into hours, to find the fraction) but I'd like a single formula which I can then apply to the whole spreadsheet.
View 2 Replies View RelatedI am trying to compute a running total of hours (from row 1) in row 2 Example................
As you can see, when the sum exceeds 24 (moving to the right across row 2) the answer resets, so to speak. Cells are formatted as time. This format *seems* incapable of recognizing quantities of hours over 24 except as days, as it were. This is obviously useful in most sorts of cases but not in this sort of case.
If I simply want the aggregate number of hours expressed as such am I doomed to failure whenever the total exceeds 24? In reply to a somewhat similar enquiry elsewhere in this forum, advice was given to format a cell as Elapsed Time. I dont see such a choice in my dropdown menu.
i need to convert second to Hours and mins and can do so using:
View 3 Replies View RelatedWhen I am converting a time from Hours/Minutes to Hours/Tenths, Excel is not converting it consitantely. EXAMPLE: 1:15 = 1.25. When I format the cell to present only one place past the decimal point, sometimes the cell will round up to 1.3, and other times it will round down to 1.2. What am I missing?
View 3 Replies View RelatedIs there a way to conver a persons time spent (given in weeks) to adjust/convert to show per month. Attached is the sheet. Do note that week 2/25 - 3/1 is a combination of Jan and Feb so hours should be logically divided into jan and feb...
Name 2/18 - 2/22 2/25 - 3/1 3/4 - 3/8 3/11 - 3/15 Feb mar
Tom 40 10 0 20 ?? ??
name
2/18-2/22
2/25 - 3/1
3/4 - 3/8
3/11-3/15
Feb
Mar
tom
40
10
0
20
??
??
I am trying to set up a time sheet for staff where it calculates hours worked in and outside of core hours. I can do a calculation to work out what they have worked in and out of core hours providing that part of their time starts of finishes in core times. The problem I am having is when some one works only outside core hours. Our core hours are 6am to 6pm. The problem is when they work from say 7pm to 1am. This is irregular work paid as overtime not shift work.
View 5 Replies View RelatedI'm going to turn the F1 key off in my spreadsheets so that I do not hit it by accident so manytimes, but how do I bring up help without it?
View 5 Replies View RelatedI have attached a sample file. All the data is inserted into this file via a text file, except one column "G". Someone in this forum was kind enough to help me in being able to include the city name 'G' to a parcel number 'A'. However, the page is constantly trying to complete 'Calculations' and won't let me do anything without first hitting 'Control Break'.
This is fine except that when I try to save the file into .txt, I don't have the option of 'Control Break' and I have to end up closing the file. As the 'real' file has over 100,000 rows, nothing happens very fast. I have tied changing the 'Calculation Options' but that doesn't seem to change anything.