when i write the following line to open the recordset then it gives me syntex error.
rs.Open "select batchno from tblmain", cn, adOpenKeyset, adLockOptimistic, adCmdTable
and if i write the following line then it works fine.
rs.Open "tblmain", cn, adOpenKeyset, adLockOptimistic, adCmdTable
i'm currently having lots of trouble with VBA's syntex 'cos
statement:
DefaultProb(i) = Application.WorksheetFunction.HLookup _
(Ratings(i), Worksheets("DefaultTable"). _
Range(Cells(2, 2), Cells(RowValue, 20)), RowValue, False)
Specifically, is
Range(Cells(2, 2), Cells(RowValue, 20))
correct? I declared RowValue previously and assigned it to another variable.
Just in case i'm not providing enough information, my whole procedure is:
Sub Default_Probability()
'Generates default probabilities
Dim i As Integer, j As Integer
Dim Tenor(1 To 5) As Integer
Dim Ratings(1 To 5) As String
Dim Row(1 To 5) As Integer
Dim RowValue As Integer
Dim DefaultProb(1 To 5) As Double
I get an application defined or object defined error at the select statement 1004...I know I know I shouldn't be selecting in code so I'll fix that but why can't I set the range?
NumRows = Sheets("Timelines").Rows.Count
LastColumn = Sheets("Timelines").Range("A1").End(xlToRight).Column
LastRow = Sheets("Timelines").Range("A" & NumRows).End(xlUp).Row
Sheets("Timelines").Range(Cells(1, 1), Cells(LastRow, LastColumn)).Select
TIA, Charlie Brown.
I'm having problems implementing a Select Case statement. Keep getting case without select case at Case condition2.
Code:
Select Case Condition
Case condition1
If Cells(rsRow, rsCol).Value = "" Then
Cells(rsRow, rsCol) = TextBox2.Value
[Code] .......
I am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
I am trying to remember what to enter into a formula to only display a certain value if there is data in the cell and if there is no data to enter something else.
I am trying to completed this example
If column a = yes
and column b = any data
then enter data
but if column a = yes
and column b = blank
then enter Yes
All I am looking for is the syntex for any data
I want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies View RelatedI have a command button on sheet MASTER. When the workbook is Activated I want it to check and see if in sheet COSTM, cell B3 there are the words "Project Number", if so then show command button (ClearPrevious), if not, don't show. Also, when the If statement is finished, then the workbook needs to end up showing the sheet MASTER. I have tried various codes and none work, or they are on perpetual loops. I know this has got to be simple, but cannot find an example to take from to solve the issue. Would appreciate any help offered. Below is code I have right now.
Private Sub Worksheet_Activate()
If Sheets("COSTM").Select Range("B3").Select = "Project Name:" Then
Me.ClearPrevious.Visible = True
Else
Me.ClearPrevious.Visible = False
End If
Sheets("MASTER").Select
End Sub
I have a form with seven check boxes on it. The code that I have been working on is below. Using the select case works exactly as I want it to unless someone checks the combination of boxes that returns a "True" for both "Apples" and "Oranges". If that combination is selected I cannot get the select case to return the correct form. I was trying stay with the select case code but I am not sure that this is the correct approach for what I am trying to accomplish.
Private Sub CommandButton1_Click()
If Form1.CheckBox1.Value = True Then X = "Apple"
If Form1.CheckBox2.Value = True Then X = "Apple"
If Form1.CheckBox3.Value = True Then X = "Apple"
If Form1.CheckBox4.Value = True Then X = "Orange"
If Form1.CheckBox5.Value Then X = "Orange"
If Form1.CheckBox6.Value = True Then X = "Orange"
If Form1.CheckBox7.Value = True Then X = "Orange"
Select Case X..........
I'm trying to put the following into a workable VB code. I don't know whether it is best to use Select Case or If Then statements or whether either can perform the tasks.
Case 1 - Range(N1).Value = KG Then Range(M1).Value = Range(V1).Value
Case 2 - Range(N1).Value = M2 Then Range(M1).Value = Range(V1).Value
Case 3 - Range(N1).Value = NO Then Range(M1).Value = Range(U1).Value
I have this select statement:
Dim ResourceMonth As String
Dim mActiveSheet As String
ResourceMonth = Sheets("Finanace").Range("J2")
Select Case ResourceMonth
Case "Jan"
Sheets("Jan").Select
Cells(8, 4).Select
z = ActiveCell.Row
SSRR = ActiveCell.Value
mActiveSheet = "Jan"
Sheets(mActiveSheet).Range("[test1julycheckbook.xls]Jan!MaxHoursJan") = (Sheets("Workdays").Range("F2")) * 8
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies View RelatedIf statement, any way where I can, when I run the macro, choose active cell?
Ex.
Start macro
and it will ask for active cell,
check if active cell higher then 0
then set cell to color red
I have this atm:
Code:
Sub LookForValue()
' Declare Current as a worksheet object variable.
Dim Current As Worksheet
' Loop through all of the worksheets in the active workbook.
For Each Current In Worksheets
[Code] .........
I have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
I have a workbook with 2 sheets I want to make an autofilter by two method :
- select case statement
- two dates
I have a formula, that is return a #Value! error for the blank cell that are referred to in the formula. How do I get rid of the #Value! error when I fill down? The formula works great.
=IF(G21>0,IF(A21+182
I would like to have a nested if or select case statement to handle a worksheet event.
The conditions it will check are:
1.Make sure target is w/in range, otherwise EXIT
2.Make sure that target offset value is not empty, otherwise display message
3.All is good, open form
Ive tried various formulations and positionings of the statements ,but not all conditions are met with equal success.
What happens is I get the the first two conditions, but the third doesnt work.
I'm working on a spreadsheet that i have a long if statement and it keeps till me i have a error. I stated reading and come to find out you can only have 7 statement.
=IF($R$6="X",VLOOKUP($A25,VISION,2,FALSE),IF($R$7="X",VLOOKUP($A25,VISION,3,FALSE),IF($R$9="X",[code]....
I am getting the Run-time error '380'. Could not set the value propery. Invalid property value.
I have a user form for data entry purpose which is working fine. Now, I am making a code for data editing purpose which pulls out data from the worksheet into the user form.
I am able to do this for text boxes and combo boxes that are not linked with each other. However I am getting a problem in the following case; I have a combo box and a text box that are linked to each other by combo box _change code which is below which may be the reason for the error I am getting for the next code...
Code:
Private Sub cmbColor_Change()
If cmbColor.Value = "Other" Then
lblColor.Visible = True
[Code]....
worksheets("Demorecords").Range("k2").formula = _
"=IF(AND(DAYS360(N2,Current_Date)>" & _
Combobox1.Text "!$B$6,DAYS360(N2,Current_Date)" & Combobox1.Text "!$B$7,"Pending Delete","Persistent"))"
A error box says compile error: expected end statement and then highlights this part (red)
I attempted to initialize values on a few Dim statements, but got compile errors: "expected end of sentence".
VB:
Dim sumTtl As Currency = 0
Dim searchTxt = "West"
if Statement A: =IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12) works very well
if Statement B: =IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12) works well too
now I am trying to say
=IF('Input Page'!B36="yes",(IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12),(IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12))))
Basically, if B36 is yes, use If Statement B, otherwise IF Statement A. If I write Yes, I get a "Value" error, if I change the yes to 1, I get a FALSE error.
I have this line of code:
Code:
If Left(value.use_type, 1) = "D" Then
Where use_type is a field in a user form.
I am getting an "object required error"
experienced coder (not VBA) and I'm having trouble with a simple statement. No idea why it was working before and moving it to it's own Sub screwed it all up.
Sub InitialMessage()
On Error GoTo BadEntry
SiteTotal = InputBox("Enter the number of approved sites *Must be an Integer > 0*")
BadEntry:
Entry = "Bad"
Msg = "An error occurred!" & vbNewLine
Msg = Msg & "Make sure you enter a valid value in all the prompted Message Boxes"
MsgBox Msg
I am running a macro which filters a column to show only records with "#N/A" (ie an error), and copies these to another worksheet. As I am aiming for no errors, there will be occasions when there is no filtered data.
My problem is that, unless I use something like xlCellTypeVisible, when there is no data shown it still copies and pastes all the hidden records. And if I do use it when no filtered data, I currently get an error "No cells were found".
I have tried many iterations of code correction and i think i'm currently blinded by staring at it so long!
My current if statement reads as follows:
[Code] .....
I think I might need to use some sort of On Error Resume Next statement, but I have never used these before. When I tried adding that before the If statement, it just ignored the criteria and tried copying hidden rows - the exact opposite of what I want.
I'd like something that said, if this condition = error, skip over entire if statement and carry on with rest of the sub.
I have a Userform which has 2 textboxes. User enter his employee id on textbox1 then enters a valid break time code which are 1,2 and 3 on textbox2. If User typed 1 then first breaktime start time will be pasted on the worksheet. When User returns after break he then enters his employee id again and then type 1 to end his first breaktime, the end time will be pasted on the worksheet. My program works fine however, I am trying to place a code which will prompt the user to end his first break time before entering another valid break code. Kindly check my code below as I am receiving an error message. 'Run-time error 9' Subscript out of range. This thing is driving me nuts. Any advise or can you tweak my coding vba experts.
View 14 Replies View RelatedI keep a formula to many arguments error.
=if(C2="","X","", ), IF(h2="","X","", )
What I am trying to say is if cell c2 is populated enter a "x" and if h2 is populated enter a "x".
Excel 2010. Windows 7
Run-time error '-2147467259 (80004005)':
An unexpected token ""20*"" was found following "1' AND
PERIOD = LIKE*. Expected tokens may include: "". SQLSTATE=42601
code died at RS.Open SQL, CN
/////////////////////////////////////////////////////////
Sub GET_OSI
Dim sn as String, osi as string, saposi As String
[code]....
I ran into a screen update problem in a project I was working on and couldn't find a solution, so I wrote some test code in a new workbook as follows;
Sub Flkr()
'-------------------------
'Screen update test
'-------------------------
'Select sheet1
Sheets("Sheet1").Select
'Disable screen update
Application.ScreenUpdating = False
'Select sheet2
Sheets("Sheet2").Select
'display message
MsgBox "Why is the %&$@ screen updating?", vbCritical, "??????"
End Sub
Seems simple enough,eh?
When I step through this code the first statement works(sheet1 is selected)
The next statement is executed without an error, so I assume it works
The next statement sheet2 is selected, and the screen updates!
Sub SheetFinder()
Application.MacroOptions Macro:="SheetFinder", _
HasShortCutKey:=True, ShortcutKey:="G"
msg1 = "What sheet would you like to go to?"
msg2 = "I'm sorry, but that sheet could not be found."
On Error Goto NotFound
TryAgain:
prompt1 = InputBox(msg1, , "Template")
If prompt1 = "" Then
End
Else
Sheets(prompt1).Select
End If
End..........