I have Excel worsheets that used to work with Excel 2000 and now cause errors since I upgraded to Excel 2003.
I get the following error when I run the macro;
Run-time error '-2147467259 (80004005)':
Method 'Select' of object 'Shape' Failed
From the following line of code;
ActiveSheet.Shapes ("Rectangle 7") .Select
The macro works perfectly on Excel 2000 but not on Excel 2003. The Macro open data files and extracts data into a big table. Is there any issues with Excel 2003. Do I need to rewrite some of the code?
To get it to run the first time I tried to use it, I had to unprotect the sheet and remove the VBA password. Then I was able to run the Macro but the code fails at the step noted above.
I was using some Excel Macros as shortcuts to go to and log into some common web sites I use everyday. After my company upgraded us from XP to windows 7 the macros stop in the middle on a line of code(in bold) and I am not sure why. Do I need a pause or delay to give it time?
HTML Code: Sub Button1_Click() Dim IE As Object Set IE = CreateObject("internetexplorer.application")
I have Excel 2000 currently at my Job. When we upgrade to 2007 or 2010 will the macros that I have for 2000 work in the newer version? If not what can I do to get them to work?
Function MultLookup(Rng As Range, lookup_value As String, col_offset As Integer, Optional num_return As Integer) As Variant Dim myArray(), cnt, cell For Each cell In Rng If cell.Value = lookup_value Then cnt = cnt + 1 ReDim Preserve myArray(1 To cnt) myArray(cnt) = cell.Offset(0, col_offset).Value End If Next cell
If num_return = 0 Then For i = 1 To cnt If i = 1 Then MultLookup = myArray(i) Else MultLookup = MultLookup & ", " & myArray(i) End If Next i ElseIf num_return > 0 And num_return
We just upgraded to Office 2010 and now on many of my regular Excel files, when I open them in the new version, the last row that's visible in the window ends up with some massively huge row height such that you can't even page down past it.
I can resolve it easily by clicking on the row number and re-sizing it, but I'm getting tired of doing that.
I have a workbook that on opening I see the following message. This workbook contains one or more Microsoft Excel 4.0 macros. What's confusing is that I never downloaded any 4.0 macros. The ones that I have were either recorded or provided by this forum. I am trying to find this macro and delete it but I can't locate any 4.0 macros. I even copied all worksheets to a new workbook and when I go under Tools/Macro there are 0 displayed. I even launched the VB Editor and can't find any.
It's not causing any problems even when I select Yes to enable these macros but it may cause some individuals to not want to open it which is a problem. I've also run Norton Antivirus and none were found. Additionally, if I open other workbooks this message is not displayed. Could someone have a look at the attached and see if they can identify what macro the message is referring to?
I convert text file into Excel. Then what I want is to look in column C for cell value “UNT:” (it is chopped word account: ) and copy value what is in the same row next column D into column K.
Then in column K copy down the value until next not empty cell.
My problem is that it works on Excel 97 and 200 but 2003 doesn’t work.
I have constructed a macro, (with lots of help from the fine people on this site), and have distributed it to several people in the company. The macro was written in Excel 2003, and runs perfectly on all the machines running Excel 2003, but persons using Excel 2000 are getting a runtime error, variable not defined.
Is there a trick to getting a macro to run in both versions of Excel?
I am running Excel 2003.I have a spreadsheet with two worksheets, each worksheet has a Refresh button that runs a Data Extract Macro.The Data Extract Macro imports Data from another spreadsheet.I want to have the spreadsheet automatically run my Data Extract Macros for both worksheets at a specific time each week. (Scheduled task) Regardless of whether or not the excel file is open.
I have a macro which is able to run very fast in Excel 2000. Almost 5s. When i run it in Excel 2003, it takes almost 4 to 5 mins to complete. Is there any patch in 2003 i need to run the macro smoothly?
I have some excel files which should be saved in Excel 97-2003 Workbook format . I am trying to write vba code for that i am struggling at starting . problem is i have 6 excel files which should be saved as Excel 97-2003 Workbook format i don't know how i give 6 files path to code .
I've created a workbook with code to email it to a reviewer then back to the originator when reviewed (along with other editing functions etc.). The problem - The originator is working in Excel 2003, the reviewer in 2007. The macros work great until the reviewer sends it back. I have not been able to figure out which FileFormat:= ???? to use when I SaveAs prior to emailing as an attachment. My Excel 2003 doesn't recognize the .xlsm file and other formats are eliminated the vba/macro coding
I have a excel 2003 template that loads a csv file and create a graph.What I am trying to do is remove the Workbook_open macro after it has been run so when they save the file it will not save the macro in the new file.
So essentially I need a VBA Macro code for Excel 2003 that can take raw data that is input every month via a text document and move it to the next sheet in the workbook. This data is essentially broken down by a "platform" in the raw data section ("P") with monthly totals for each month but it is broken down by platform in total which goes in descending monthly order on the "dat" tabs (which is the final place for the data).
So what needs to happen is the data for the last two years must go from the "P" tab to the "PDat" tab under the correct platform and the correct spot for the newest month. The data that is input each month is in the same format month to month, just starting two rows down from the last month.
At the end of two years, the oldest year of data must be deleted and the other data moved up to the vacant area so that the sheet never grows too large (i.e., at the end of this year 2012 will be deleted and all the data will need to get moved up).
I wrote a macro to select multiple sheets by name and hide them, but I keep getting the following error message:
"Object variable or with block variable not set".
Below is the macro:
Sub HideSheets1A() Dim ws As Worksheet Application.DisplayAlerts = False If ws.Name = "Variance Evaluation" Or "Investment" Or "Costs & Incentives" Or "Revenues Total" Then ws.Visible = False End Sub
a VBA problem I have and I do not know how to solve. I use Excel 2003.
I have a workbook with a table; all cells except the table area are locked so at users cannot add any data. The table is on D2: H?. The workbook is password protected (users can only "Select unlocked cells", "Format cells" and "Sort"), and for that reason there is a "Add Rows" macro button so they can add more rows if necessary. It works well.
There is also a "Delete Rows" button, but it does not work as I want it to do. If the table is for example on D2:H4, and I select a cell on row #3 (ex. D3, or E3, or H3) and click on the button it deletes row #3, if I click on the button again it deletes row #4, and if I click on the button again it also deletes row #5 and so on, but it should not do it because all rows below row #4 are locked and should not be deleted.
I found on the Internet a code that I modified, but I do not get it to work. Below are the two macros.
My original macro (it deletes even locked rows):
Sub DeleteRows() ' ActiveSheet.Unprotect Password:="123" ' Selection.EntireRow.Delete ' ActiveSheet.Protect Password:="123", DrawingObjects:=True, Contents:=True, Scenarios:=True _ , AllowFormattingCells:=True, AllowSorting:=True End Sub
The macro found and modified (the original rows are commented):
Sub DelRows_2() Dim rngDelete As Range Do While rngDelete Is Nothing On Error Resume Next
I need to find out which version of excel i am using in macro.I mean whether it is 2003 or 2007.Because i need to put 2 diff codes according to the version of excel.Can any one please provide me the macro code to findout the version of Excel.
I'm trying to run a macro on my machine (Windows 2000 and Office 2003) and I keep getting an error on one method. Now I tried to run the same macro on a different machine (Windows XP and Office 2003) and it didn't error out.
Public strControlTitle As String Public strControlTime As String Public strControlUnit As String Public intControlItem As Integer Public intLastNameOnly As Integer Public intDataType As Integer
Sub Main() Dim strControlItem, strPageName, strValue, sigma, z95, z99 As String Dim r, c, count, cmax, rmax, rt, ct, low, high, a, b As Integer Dim lesscol As Integer With ControlChartForm .ComboBox1.AddItem ("Average Turn Around Time All Patients")....................
Spreadsheet 1 has 10 columns of data (A-J). I want to copy a variable number of rows from spreadsheet 1 to spreadsheet 2.
When I paste into spreadsheet 2, I'd like to automatically insert blank cells in three places, taking the total number of columns to 13. I'd like columns C, F and I to be blank, and the last column with data to be M.
I will perform this task regularly, and add the copied cells to the bottom of spreadsheet 2, so I'd only like to insert blank cells within the range that I'm copying, not the entire spreadsheet.
I will then populate the blank cells with a VLOOKUP function. Do I need another macro to automatically add the formula to the cells, or is there a way to include this in the cell-inserting macro?
I have a dropdownmanu in sheet1 with different countries taken from Column A in Sheet3. I need a macro to run when i select a country example Denmark. It will fill out transmittal code and also country code in named cells for it in sheet1. Info taken from Sheet3
Transmittal code is in below testsheet in Sheet1 cell E12.
Country code is in Sheet1 cell.
But this have to be possible to change. Also the range for the country have to be possible to change.
This vba code i need to run as soon as i select a country in the dropdown manu.
But one thing i would like to solve also is. When i select a country it will create a dropdownlist in I13 taken from the info in column, i have in Sheet3 column F. So if i select example Denmark, it will show a dropdown menu in sheet1 I13, with the ledger codes 10 and 6x. I have tried to make this work but cant make it work good.
I use excel 2003. Please have a look and upload the testsheet back.
Creating a macro that updates and copies part of a worksheet in Excel 2003 and pastes it in MS Word. The sheet I have is a sheet that updates some prices etc and after it updates I usually select a square (part of the sheet), press CTRL+C to copy it and paste it as a picture (paste special ) in word. Is there a way to automate the process?
I am thinking a macro that updates the sheet, copies and pastes iit on word??
I have three workbooks that contain various types of information. I have an Overtime workbook that lists employees and calculates the straight time and overtime worked for the day. This is the main log that information will be pulled from.
I need writing a macro that will copy over information to an Absent Log workbook and a Production Model workbook.
The Absent Log workbook:
This workbook contains worksheets from each month. I need excel to do a lookup of the name in the Overtime workbook and copy the information from the "OT" column but if that column is empty I need it to pull the information from the "Personal DT" column.
The Production Model workbook:
I need this workbook to automatically pull the total straight hours and overtime hours to the production model for the correct day. This will also pull from multiple sheets.
I am going to be writing this in Excel 2010 but it will be primarily used in Excel 2003.
I have a workbook that has 30 tabs in it. Each tab is a report card for students. What I'd like to do is create another tab with a button on it that when I hit the button it will search through each tabs range of D12:D40, D48:D76, D84:D112, D120:D136, J12:J40, J48:J76, J84:J112, and J120:J136. And if any of these cells has an MS in them then this new sheet I have created will list each students name which is in cell E5 and list what they recieved the MS for. This will be in the same row number but in column B. So if cell D12 has an MS in it then this report will list the students name and what's in cell B12.
I have a group of Excel (2003) template files, each with a different name. When these files are opened they ask for certain information and save themselves as a unique name. Within these files are VBA routines and functions and, because these files basically do the same things, they have the same name. These routines exist in their own unique modules each with a different name. Unfortunately, in these files there are differences in the number of columns of information these routines act on so once they have been saved I need them to only act on their own columns only.
My problem is, when I have more than 1 of these files open in the same instance of Excel, I try to run a file using a control letter combination Ctrl-e and it sometimes runs the version of the macro in the wrong file. This leads to all kinds of strange thing happening. What I can do to force the correct macro to work in all instances?
