I am running Excel 2003.I have a spreadsheet with two worksheets, each worksheet has a Refresh button that runs a Data Extract Macro.The Data Extract Macro imports Data from another spreadsheet.I want to have the spreadsheet automatically run my Data Extract Macros for both worksheets at a specific time each week. (Scheduled task) Regardless of whether or not the excel file is open.
View 4 RepliesI am trying to adjust the below macro so that it will work in Excel 2010.
Sub OpenAndProcess()
Dim fs As FileSearch
Dim I As Integer
[Code]....
I use Excel 2003 at work. I'm looking for some code that will Open a folder and then lets the user to select a file then continues to run the macro.
The file name they select will look similar to this K2271011.504 or K3011111.201
I'm new to macros. I have a data range of A6:H100.
If cells in column H (Complete?) = Yes I want the row moving down to the next available empty row.
Collection DateCustomer Order NumberNo of PalletsHaulierContact Date Collected Complete?
(I'm using 2003)
I have some excel files which should be saved in Excel 97-2003 Workbook format . I am trying to write vba code for that i am struggling at starting . problem is i have 6 excel files which should be saved as Excel 97-2003 Workbook format i don't know how i give 6 files path to code .
View 2 Replies View RelatedExcel 2003
I have a macro and want to allocate it to a "button" . The macro is all ok.
So I make visible the FORMS floating toolbar / icon set.
There are 16 icons on this floating toolbar / icon set.
But the icon for button is missing, in that it is just 100% blank.
The other 15 icons are all ok, such as "Group Box".
Normally I would click this "button" icon, then draw my button, then allocate my macro to it.
Looking for a macro in Excel 2003 that will open a pop up box so that the user can enter a date to search for within the spreadsheet.
View 6 Replies View RelatedI have a excel 2003 template that loads a csv file and create a graph.What I am trying to do is remove the Workbook_open macro after it has been run so when they save the file it will not save the macro in the new file.
View 3 Replies View RelatedSo essentially I need a VBA Macro code for Excel 2003 that can take raw data that is input every month via a text document and move it to the next sheet in the workbook. This data is essentially broken down by a "platform" in the raw data section ("P") with monthly totals for each month but it is broken down by platform in total which goes in descending monthly order on the "dat" tabs (which is the final place for the data).
So what needs to happen is the data for the last two years must go from the "P" tab to the "PDat" tab under the correct platform and the correct spot for the newest month. The data that is input each month is in the same format month to month, just starting two rows down from the last month.
At the end of two years, the oldest year of data must be deleted and the other data moved up to the vacant area so that the sheet never grows too large (i.e., at the end of this year 2012 will be deleted and all the data will need to get moved up).
Attached is a sample data workbook.
I cant find out of include the submit button. I can fill out the field but not submit.
Use excel 2003
[Code]...
I wrote a macro to select multiple sheets by name and hide them, but I keep getting the following error message:
"Object variable or with block variable not set".
Below is the macro:
Sub HideSheets1A()
Dim ws As Worksheet
Application.DisplayAlerts = False
If ws.Name = "Variance Evaluation" Or "Investment" Or "Costs & Incentives" Or "Revenues Total" Then ws.Visible = False
End Sub
I use Excel 2003
a VBA problem I have and I do not know how to solve. I use Excel 2003.
I have a workbook with a table; all cells except the table area are locked so at users cannot add any data. The table is on D2: H?. The workbook is password protected (users can only "Select unlocked cells", "Format cells" and "Sort"), and for that reason there is a "Add Rows" macro button so they can add more rows if necessary. It works well.
There is also a "Delete Rows" button, but it does not work as I want it to do. If the table is for example on D2:H4, and I select a cell on row #3 (ex. D3, or E3, or H3) and click on the button it deletes row #3, if I click on the button again it deletes row #4, and if I click on the button again it also deletes row #5 and so on, but it should not do it because all rows below row #4 are locked and should not be deleted.
I found on the Internet a code that I modified, but I do not get it to work. Below are the two macros.
My original macro (it deletes even locked rows):
Sub DeleteRows()
'
ActiveSheet.Unprotect Password:="123"
'
Selection.EntireRow.Delete
'
ActiveSheet.Protect Password:="123", DrawingObjects:=True, Contents:=True, Scenarios:=True _
, AllowFormattingCells:=True, AllowSorting:=True
End Sub
The macro found and modified (the original rows are commented):
Sub DelRows_2()
Dim rngDelete As Range
Do While rngDelete Is Nothing
On Error Resume Next
[Code]....
I have two spreadsheets in Excel 2003.
Spreadsheet 1 has 10 columns of data (A-J). I want to copy a variable number of rows from spreadsheet 1 to spreadsheet 2.
When I paste into spreadsheet 2, I'd like to automatically insert blank cells in three places, taking the total number of columns to 13. I'd like columns C, F and I to be blank, and the last column with data to be M.
I will perform this task regularly, and add the copied cells to the bottom of spreadsheet 2, so I'd only like to insert blank cells within the range that I'm copying, not the entire spreadsheet.
I will then populate the blank cells with a VLOOKUP function. Do I need another macro to automatically add the formula to the cells, or is there a way to include this in the cell-inserting macro?
I have a dropdownmanu in sheet1 with different countries taken from Column A in Sheet3. I need a macro to run when i select a country example Denmark. It will fill out transmittal code and also country code in named cells for it in sheet1. Info taken from Sheet3
Transmittal code is in below testsheet in Sheet1 cell E12.
Country code is in Sheet1 cell.
But this have to be possible to change. Also the range for the country have to be possible to change.
This vba code i need to run as soon as i select a country in the dropdown manu.
But one thing i would like to solve also is. When i select a country it will create a dropdownlist in I13 taken from the info in column, i have in Sheet3 column F. So if i select example Denmark, it will show a dropdown menu in sheet1 I13, with the ledger codes 10 and 6x. I have tried to make this work but cant make it work good.
I use excel 2003. Please have a look and upload the testsheet back.
Creating a macro that updates and copies part of a worksheet in Excel 2003 and pastes it in MS Word. The sheet I have is a sheet that updates some prices etc and after it updates I usually select a square (part of the sheet), press CTRL+C to copy it and paste it as a picture (paste special ) in word. Is there a way to automate the process?
I am thinking a macro that updates the sheet, copies and pastes iit on word??
I have three workbooks that contain various types of information. I have an Overtime workbook that lists employees and calculates the straight time and overtime worked for the day. This is the main log that information will be pulled from.
I need writing a macro that will copy over information to an Absent Log workbook and a Production Model workbook.
The Absent Log workbook:
This workbook contains worksheets from each month. I need excel to do a lookup of the name in the Overtime workbook and copy the information from the "OT" column but if that column is empty I need it to pull the information from the "Personal DT" column.
The Production Model workbook:
I need this workbook to automatically pull the total straight hours and overtime hours to the production model for the correct day. This will also pull from multiple sheets.
I am going to be writing this in Excel 2010 but it will be primarily used in Excel 2003.
I uploaded the workbooks to filefactory.
OT Workbook: [URL] ......
Absent "Log" workbook: [URL] .....
Production Model: [URL] .....
I have a workbook that has 30 tabs in it. Each tab is a report card for students. What I'd like to do is create another tab with a button on it that when I hit the button it will search through each tabs range of D12:D40, D48:D76, D84:D112, D120:D136, J12:J40, J48:J76, J84:J112, and J120:J136. And if any of these cells has an MS in them then this new sheet I have created will list each students name which is in cell E5 and list what they recieved the MS for. This will be in the same row number but in column B. So if cell D12 has an MS in it then this report will list the students name and what's in cell B12.
Windows XP
Excel 2003
I have a group of Excel (2003) template files, each with a different name. When these files are opened they ask for certain information and save themselves as a unique name. Within these files are VBA routines and functions and, because these files basically do the same things, they have the same name. These routines exist in their own unique modules each with a different name. Unfortunately, in these files there are differences in the number of columns of information these routines act on so once they have been saved I need them to only act on their own columns only.
My problem is, when I have more than 1 of these files open in the same instance of Excel, I try to run a file using a control letter combination Ctrl-e and it sometimes runs the version of the macro in the wrong file. This leads to all kinds of strange thing happening. What I can do to force the correct macro to work in all instances?
What i am trying to do is in 1 workbook (labled as Book1 literally), it needs to copy the sheets out of every .xls file there is in a single directory, we'll call C:MyFolderMySubFolder. There can be anywhere between 1 and 366 files in this particular folder and I need all the sheets in each file labled 'CC' copy that entire sheet, paste that sheet to Book1, go back to that file it was copied from, close it (saving changes is ok), then move on to the next file.. and the next file... and so forth
While pasting into book1, I need each WS copied from each file to paste to a new worksheet in book1 rather than combining them into 1 or overwriting, and lable each of those sheets the file name of which the sheet came from...
The names are in sequence. All files in the folder will be labled as a date such as "9-6-12" so the sheet name in book1 would be named 9-6-12. (so there may result in 366 new worksheets to book1)
I primarily use Microsoft Office Excel 2003
I have got an issue. in MSE 2003, this beginning of macro worked:
Sub Consolide()
MYFOLDER = "D:DATAMypath"
In MSE 2010, it gives me an error: "Can't find project or library"
I really know that my path is defined fine, because it worked perfect before MS update.
I am trying to create a macro that will change all pivot fields with a certain name to the value I have the master pivot changed to. For example, I have 5 pivot tables, which each contain the field "Fruit". I want to change the 1st pivot table to "Apples", "Oranges", and "Pears" as active values, and then run the macro, making the other fruit fields also have these values. I can do it for single items, but when I need to do multiple items, I get an error message. I'm not sure how to write in VBA in order to do this.
View 5 Replies View RelatedI often need to use Paste Special . .. Values, using Excel 2003. So I recorded a Macro into "Personal.xls" and assigned a shortcut key combination "CTRL-Shift-V" so that it would always be available. I first select one or more cells and hit CTRL-C to copy to clipboard, click on another cell, then hit CTRL-Shift-V to run the following macro:
VB : Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
It often works . . . and it often fails. When it is working it seems to keep working over and over. When it is failing it keeps failing. So it is almost as if there are two "modes" of operation, which for lack of terms, for this post I will coin the terms "fail mode" and "fixed mode". Once I am in one of the two modes, it stays there for a while. When it is in the "fail mode", I always get the dreaded:
Run-time error 1004: "Pastespecial method of Range class failed".
Since this problem is very intermittent, I believe this is why there are so many posts in the Internet about this, and so many people are replying back "it works fine for me". I have seen many solutions offered but none work so far for just a simple shortcut key to do a PasteSpecial :Values. Some solutions "work" . . . such as adding the PasteSpecial button to the Toolbar, or pressing ALT-E-S-V <Enter> - but both of these bring up the Paste Special dialog box which I want to avoid.
I spent days trying the many solutions offered but so far all I have found is a trick to convert Excel from "fail mode" to "fixed mode". The trick is to add a line to the macro to first do a "Paste Special: Format:
VB:
Selection.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
Then select and copy any cell/s, click on another cell, and run the macro just ONCE - it will paste the formatted value successfully and you are now in the "fixed mode". Now you can remove the PasteSpecial:Format line that you just added, to get back to the original macro with just the "Paste Special: Values" line:
VB : Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
Now Excel is in the "fixed mode" and the original macro will once again start working properly. BUT only for a while !! Then some time later, usually within a day or a couple hours . . . Excel goes back into that "mode" where once again the macro fails repeatedly. I have been unable to isolate what causes the mode to return to failure.
Any simple way to either change the code so that it ALWAYS is successful, why this often is not successful ? I believe that the fact that adding in the Paste Special : Format code and running it just once to fix the problem, also could be a clue as to what causes this problem to "sometimes" occur.
I have an annual leave (vacation) work book with a summary page work sheet and separate work sheets for each month i.e. Jan, Feb, Mar.....to......Dec. In order to protect the formulas I have protected them by allowing only access to the input cells on each work sheet and the protect each work sheet.
When someone either joins or leaves the team I have to manually unprotect each sheet and protect again when I have completed the amendments to each of the 13 tabs.
macro code I would need to unprotect all the works sheets in one go (as I use the same password for all the sheets) and reset the passwords (protect) the sheets with more macro code.
I will be running the two macros from my own personal.xls file and ideally they would be fully automatic i.e. I would not need to input the passwords in to unlock or lock the work sheets as the password would be written in the code already
Excel version 2003
Now iam Working in excel 2003, I got a Requirement that, After Downloading datas From SAP, It Directly Stored in Excel Sheet , Using tht Sheet1, I need to rename all the Filenames at a time, Is It possible, Any code is there to rename,
For Example,
From SAP to Excel Sheet Datas are Like this in Sheet1,
DmsNo Filename
50007685 SDFFG.jpg
50004678 HGJKID.jpg
50003421 VGFTHR.jpg
Then i have rename that filename, rename 'SDFFG.jpg' To '50007685.jpg', and it Should be directly rename to my Source File.
For Example:
Source File: C: estSDFFG.jpg
After renaming it Should be,
Source File: C: est50007685.jpg
any code is there to rename,
Operating System: Windows XP, Excel version: 2003
Aim: To create a Macro to hide all rows where the date in column D is before today. Column D has about 600 rows.
Current solution:
Code:
Sub Hide_Old2()
'Worksheet name
With Worksheets("Schedule")
'set start of date range
Set rngStart = .Range("D2")
'find end of date range
[Code] .....
The problem with this solution is its speed, or lack thereof. It causes the screen to hang and flicker while it cylces through. Is there some way to create a range based on the date and hide the range? or another solution?
Note: Autofilter is not an option, as the spreadsheet with the dates needs to be kept simple for other stakholders and the macro is being run from another sheet.
When I am running a macro in excel 2003/windows 7 and trying to create a text file, it is giving this error. I am attaching two pictures.
View 1 Replies View RelatedI have unprotected cells in excel where I need to change the content (number) and cell color, but I don't want the cell borders to change. I'm a beginner with vba. I've tried protect sheet and workbook options, but looks like I need a vba code and don't know where to start.
Win 7
Office 2007
I created some excel 2003 spreadsheets to use for Fire/Police dispatchers. I have a series of yes/no option buttons that were created using the control toolbox. I have a macro that clears all the blanks where text is added, but want to add a line that clears the option buttons also.
View 14 Replies View RelatedCopy over data from different workbooks and using paste special values to paste it into a new workbook using a macro. Here is what I have and what I am looking for:
My file path is
C:Documents and SettingsMy DocumentsProjectCostsDecember12
In this folder I have workbooks called:
Function1
Function2
Function3
In each workbook I have 4 worksheets
Cashable12-13
NonCashable12-13
Total12-13
GrandTotal12-13
I also have a workbook called DecMonthlyTotal in the same folder with the same named worksheets.
I am looking for a macro to be placed in the DecMonthlyTotal that will pull the data from the Cashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name Cashable12-13, it will also pull the data from the NonCashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name NonCashable12-13
Both the Cashable12-13 and the NonCashable12-13 have Columns A - G The row that the macro should start the copying from is Row 3 for each of the workbooks; however I don't have an end row for the workbooks as this will vary.
I am using Excel version 2003.
i have a macro that opens 10 other workbooks and copies cells onto a "master" workbook. Until recently, everything worked fine. Suddendly, while it opens the 9 books and copies as it is expected, but when it opens the 10th wb, the macro breaks at a very simple copy/paste.
The weirdest thing is that after it breaks, I cannot select any cells neither in the opened wb nor in the master wb. This continues even after I press the "reset" button in the vba. So, I am only able to select objects (text boxes etc) in my wb and not any cells.
Also, the "arrow" icon on the design toolbar is not active. And I've tried pressing and de-pressing the F8 key, but I still cannot select any cells.
I have option explicit in the beginning of my macro. And i'm using excel 2003.