I have three workbooks that contain various types of information. I have an Overtime workbook that lists employees and calculates the straight time and overtime worked for the day. This is the main log that information will be pulled from.
I need writing a macro that will copy over information to an Absent Log workbook and a Production Model workbook.
The Absent Log workbook:
This workbook contains worksheets from each month. I need excel to do a lookup of the name in the Overtime workbook and copy the information from the "OT" column but if that column is empty I need it to pull the information from the "Personal DT" column.
The Production Model workbook:
I need this workbook to automatically pull the total straight hours and overtime hours to the production model for the correct day. This will also pull from multiple sheets.
I am going to be writing this in Excel 2010 but it will be primarily used in Excel 2003.
I have a workbook that has 30 tabs in it. Each tab is a report card for students. What I'd like to do is create another tab with a button on it that when I hit the button it will search through each tabs range of D12:D40, D48:D76, D84:D112, D120:D136, J12:J40, J48:J76, J84:J112, and J120:J136. And if any of these cells has an MS in them then this new sheet I have created will list each students name which is in cell E5 and list what they recieved the MS for. This will be in the same row number but in column B. So if cell D12 has an MS in it then this report will list the students name and what's in cell B12.
Aim: To create a Macro to hide all rows where the date in column D is before today. Column D has about 600 rows.
Current solution:
Code: Sub Hide_Old2()
'Worksheet name With Worksheets("Schedule") 'set start of date range Set rngStart = .Range("D2") 'find end of date range
[Code] .....
The problem with this solution is its speed, or lack thereof. It causes the screen to hang and flicker while it cylces through. Is there some way to create a range based on the date and hide the range? or another solution?
Note: Autofilter is not an option, as the spreadsheet with the dates needs to be kept simple for other stakholders and the macro is being run from another sheet.
I have a worksheet with data in it. The data could be in any column or row. I am looking for data which contains the numbers 01. If I find such data, I want to move all the data in that particular cell it to column A.
My code(which is not working) is below. I'm using Excel 2003.
Code: Sub delete_oldads() 'the code to find 01 Dim cel As Range
I have been using VBA to copy and move files to create backups for 7 or 8 years now, and it works great. However, recently I have been working on a way to use SD cards for the backups and the FileCopy command is much slower than using Windows Explorer.
I am looking for some alternate command lines that might do the job faster. I would like to know what Explorer is using.
However, there are times when I need to add a column/criteria. Thus I would have to go into conditional format and redo all the rows in the worksheet. Is there a smarter way to do this?
I was hoping to provide a list of cell address from the header or better than that look for specific numbers in the header row and if there is a number greater than zero, then highlight the entire row.
There is no specific pattern as to which columns would trigger the requirement.
Also how do you keep the ranges from moving when copying across and down. Sometimes I run into that issue. Maybe highlight the entire row and then enter the conditional format?
I wanted to know if it was possible for me to be able to copy a whole row into a different sheet based on a column value. For example, if B6 = CLOSE, the whole row would be coppied to the sheet name CLOSE. If B6 = OCCUPIED it would be copied to sheet name OCCUPIED. I also need if W7 = to a date thats passed today it would be added to the sheet name EXP PRD. An off topic question, i have this code for column "W":
=COUNTIF(W6:AD155,">"&TODAY()+15)
It works just fine, but I also have "N/A" / "INDEF" in the blocks as well so it's not giving me the correct results. I'm using Excel 2003.
Excel 2003 - delete duplicates based on value in one coloumn.
very simple but how!i want the whole row deleted where there are duplicates in one column but ONLY the duplicates, so, if they're 3 duplicates in the column i want 2 deleted leaving 1 unique record.
I am running Excel 2003.I have a spreadsheet with two worksheets, each worksheet has a Refresh button that runs a Data Extract Macro.The Data Extract Macro imports Data from another spreadsheet.I want to have the spreadsheet automatically run my Data Extract Macros for both worksheets at a specific time each week. (Scheduled task) Regardless of whether or not the excel file is open.
I need to calculate out the loan amount of approved loans by week (weekending on Sunday). For example for the week ending December 28th, 2013
$1,234,567,890 in total loans
I also need to have a list of sums of the loan amounts per code types of approved loans. For the week ending December 28th, 2013
$123,456.00 in total loans for Code: LTV/TLTV > Guideline max $987,654.00 in total loans for Code: FICO > 10 pts below Guideline min
I need to ignore any loan amounts and codes for any loans that have not yet had a approved date entered and also ignore all loan amounts for any loans that are denied. I have tried doing this in many different ways with Pivot Tables and I am not getting the results I need.
At the moment I do it all manually, and it takes forever. I am sure there must be a simple way of doing it. I am using Excel 2003, but could work in a newer version if required.
I was wondering if it is possible to have cells formatted based on the presence of an autofilter? I have a large worksheet, and to clean it up I would like to make the entire sheet (minus the category headers) invisible. Then, when the user applies a filter, the cells become visible.
I have two worksheets (Sheet1 and Sheet2). Based on meeting a condition on Sheet1 AND Sheet2, I'd like to use macros to automatically hide rows on Sheet2.
Sheet1 sample: Type Selection
[Code]...
The conditions are: If on Sheet1, a Type has the Selection "Include", then any rows on Sheet2 which have that same Type are shown (ie. not hidden).
If on Sheet1, a Type has the Selection "Exclude",then any rows on Sheet2 which have that same Type are hidden.
So in the example tables above, if ONLY Type A = Include, then on Sheet2, the rows for Sample URL1 and Sample URL2 are shown, and the others are hidden.
Also in the example tables above, if Type A = Include AND Type B = Include (and all other Types are Exclude), then on Sheet2, the rows for Sample URL1, Sample URL2 AND Sample URL3 are shown, and the others are hidden.
I'm fine with the concept of If... And... on the same worksheet, it's trying to get it to look at two separate worksheets I'm struggling with!!
I have a workbook with two worksheets, Sheet1 and Sheet 2. Based on the data entered in the 2nd column on Sheet1, I'd like a macro which hides rows for Events which do not meet the criteria entered on Sheet1.
So in the example below, on Sheet2, I only want to see rows where the Country=Scotland, AND the Location=Glasgow, AND the Start Date is greater than (or equal) the Start Date on Sheet1.
Sample of Sheet1 Country Scotland
Location Glasgow
Start Date (dd/mm/yyyy) 30/04/2013
[code]....
So in this scenario, only the FIRST row meets the 3 criteria (Scotland, Glasgow, date after 30th April), thus all the other rows should be hidden.
I have an excel file (2003 version) with one sheet called sheet1.
On sheet1 I have multiple text boxes, however each text box has the same text box number "Text Box 1244" (this number appears in the top left-hand side in excel when I click the textbox).
I was wondering if it's possible to rename the text boxes based on their location on the sheet.
Eg. If i had a sheet with 5 rows of text boxes and 3 columns of text boxes (15 text boxes in total).
The top left-hand box gets renamed to "Text Box 1", then the text box below that gets renamed to "Text Box 2" and so on to the bottom of the sheet to "Text Box 5". Then the vba script would move to the text box that was to the right of the first text box (1st row again but 2nd column), and rename all the text boxes in that column ("Text Box 6" onward).
I'm stuck on this problem a while now and cannot find any scripts to solve it. My VBA is non-existent, I usually get by on bits of code I find on the web.
I hope each textbox has a hidden co-ordinate associated with it, then it might be possible to loop through all the textboxes based on their positions and rename them.
I have the following code, which I used to search Column A for a date and then copy the adjacent cell next to the date and paste it to sheet2.
However what I want to do now is be able to enter just the month or the year and the code will find the cells that contain the same year or month that I entered. I know to find a string value in a cell I can use InStr() however I don't know how to implement this into the code that I have, As depending on the month that I select I want the code to put the value in a certain cell.
Here is the code that I have so far
Code:
Sub SearchMacro() DateSearch.Show
Dim LR As Long, i As Long With Sheets("Sheet1") LR = .Range("A" & Rows.Count).End(xlUp).Row
[Code] ......
How I can do this by edited the current code or any code for that matter.
I have some excel files which should be saved in Excel 97-2003 Workbook format . I am trying to write vba code for that i am struggling at starting . problem is i have 6 excel files which should be saved as Excel 97-2003 Workbook format i don't know how i give 6 files path to code .
I have a company with upto 5 products, and I have created a dropdown box where you select your product.
When I select product 1 i would need info on product 1 , when i select product 2 I need info on product 1 and 2 and continue. so for product 5 -i need info on product 1-5.
I tried to add all info on excel and tried to delete it one by one by deleting rows in excel for products but it does not work.
I would like to be able to limit a drop down list's contents based on a user's selection in a different drop down. I am using Excel 2003, and I know how to do this in Access, but I can't figure it out in Excel. Basically, I have a list of themes in one drop down. The user picks a theme, and goes to a second drop down which is a list of sub-themes attributable to that one theme and no other theme.
I am setting up a template to use to track candidates throughout their lifecycle. I am also creating a 'summary report' on another worksheet that counts total number of candidates, counts the number of candidates that have been submitted to the client, count of the number of candidates that have been interviewed by the client, etc.
How do I count the number of candidates in the spreadsheet?
In Cells A6:B5, I have "Submitted" In Cells A7-?? I have dates for those candidates that have been submitted. Then a new section titled, "In Process" A list of candidates are contained within that section. Then a new section titled, "For Review" etc.
There are multiple sections, so the date in Column A1 may not always be in a constant row, as it depends on how many candidates are within a certain 'phase'.
I have a column I5, titled "Status" This column has a built in drop-down list that contains pre-defined status, for example, "Submitted", "Candidate Declined", "2nd Message Sent", etc. I need to be able to create a summary report based on a count of candidates that fit certain 'Statuses'. For example, count the number of candidates that were Interviewed. This could be a combination of Statuses: Phone screen with client, 1st F2F, 2nd F2F, etc.
(At home, I am using Excel 2003. At work, I am using Excel 2007. So if it's easier to create in Excel 2007, that's fine.)
I need a formula to do a partial text match on column B to find all rows that contain "825-CL-A", then sum column C for all applicable rows with the latest date. In this example the result should be "4.25 + 6.50 = 10.75". I'm using Excel 2003 for this project.
A B C 7/1/2012 0:00825-CL-A-41091-REG4.00 7/1/2012 0:00825-CL-A-41091-REG6.25 7/1/2013 0:00825-CL-A-41456-REG4.25 7/1/2013 0:00825-CL-A-41456-REG6.50 1/1/2014 0:00825-CL-A-41640-REG4.25 1/1/2014 0:00825-CL-A-41640-REG6.50 3/1/2014 0:00825-CL-E-41699-REG3.00 3/1/2014 0:00825-CL-E-41699-REG4.00
I'm trying to make a macro in Excel 2003 to create x amount of named worksheets that are a copy of a different worksheet.
1. I have a main worksheet that will have a number manually entered into a cell (lets say A1); 2. I have a 'template' worksheet; 3. I'll assign the macro to a button on the main worksheet
If I enter '10' into cell A1 of the main worksheet, I'd like to click the button and have Excel create 10 copies of the template worksheet. These new worksheets should all share the same name with a number after them (ex: banana 1, banana 2..... banana 10).
I'm stuck using Excel 2003 to auto-populate a cell.
I have a range of dates in five consecutive columns called:
Phase 1, Phase 2, Phase 3, Phase 4 and Phase 5
I enter the date that 'Phase 1' starts under the first header. Once Phase 2 starts I enter a date under 'Phase 2', and so on to Phase 5.
Each phase is consecutive to the next so will always be filled in from 1 to 5.
I want to create an additional column called 'Status' that shows the Column Title of the last phase with a date in it. For example, if Phase 1 to 3 had dates but 4 & 5 were blank, "Phase 3" would be displayed in the 'Status' column.
I've tried nesting some ISBLANK functions without any luck.
I have a excel 2003 template that loads a csv file and create a graph.What I am trying to do is remove the Workbook_open macro after it has been run so when they save the file it will not save the macro in the new file.