I have so data I am trying to combine based on count value of investment on Col A. If it appears more than once on col A then I want the col B values on col D. I have macro that works but I need make sure if Col B have any TRAC and TRL1 then I want to add that on Col D. For example so Col D1 would be EURX, TRL1 at 83.50, FTID and Col D5 would be TRAC at 87.88, Markit. Below is the macro.
View 9 RepliesI have data like this in data have tab in my sample file
POSSIBLEREDYELLOWGREENPINKVIOLET
GRADE/GRADEA/CG/GA/GG/GA/A
GRADE/GRADEC/CG/GG/GG/GA/A
GRADE/GRADEA/CC/CA/AA/AC/C
GRADE/GRADEA/CG/GA/GA/GA/C
GRADE/GRADE-----
and i have this data in lookup tab in my sample file
possibleREDYELLOWGREENPINKVIOLET
COLORC/CG/GG/GG/GA/A
GRADEA/AC/CA/AA/AC/C
now i want to do like this
if B2 value (red column) of datahave tab is equal to B2 value of red column in lookup tab then B2 value (red column) of datahave tab is equal to A.
if B2 value (red column) of datahave tab is equal to B3 value of red column in lookup tab then B2 value (red column) of datahave tab is equal to B.
if B2 value (red column) of datahave tab is not equal either B2 and B3 value of red column in lookup tab then B2 value (red column) of datahave tab is equal to H.
[code]....
i tried normal Hlookup but i do not know how combine multiple IFs to solve my problem.
I have 4 IF(AND) conditions that work fine separately but I can't seem to combine them into one.
=IF(AND(H56="New",I56="RE",Q56<=5),”YES”,”NO”))
=IF(AND(H56="New",I56="NON",Q56<=1),”YES”,”NO”))
=IF(AND(H56="Renew",I56="RE",Q56<=3),”YES”,”NO”))
=IF(AND(H56="Renew",I56="NON",Q56<=2),”YES”,”NO”))
I have two formulas that I have worked out to deliver the results independently. I would like to join them together into one formula and add an If condition that if the two match then add a "+" to the end of the string.
#1 finds the base value :
=IF(ISERR(FIND("/",I2)),I2,LEFT(I2,FIND("/",I2,FIND("/",I2)-1)-1))
#2 verifies the value is a valid color:
=INDEX(M1:M41,MATCH(J2,M1:M41,0),1)
I would like to join the two formulas together and if they match then add a space, " " and a "+" to the end of the string. If there is no match then return the base value.
I'm importing some data from an HTML table into excel, it all formats pretty well except that some of the data appears on multiple rows.
A B C
1 01.02.06 John
2 Bob
3 Sam
4 02.03.06 Jim
What I need:
a b c
1 01.02.06 John, Bob, Sam 3
2 02.03.06 Jim 1
What I need to do is get all the items in the colum B which are listed under the same item in column a, in the first case John Bob and Sam and put them all into the same cell. I then want to delete the empty rows. It's important that this is done by testing to see if column A is blank, rather than using the date.
then in column C I want to count the items in column B,
ideally then repeat the script for the whole sheet.
Not a clue of the type of syntax I should be using though!
In fact there's probably a better way of importing the data from the HTML so it doesn't even need to be done this way! of course I'm oblivious to it. Auto Merged Post Until 24 Hrs Passes;Thinking maybe I didn't make myself properly clear....
If a cell in column a is empty then it means the item in column b needs adding to the end of the item in the row above in column b.
I then want to count the items in column b.
I need to first merge cell entries of column 2 if cell entries of column 1 are the same; following columns always retain their corresponding first row (see cells highlighted in yellow in attachment).
View 14 Replies View RelatedI have one column that contains a monetary amount (column AQ) , and another that contains text reading either "inflows" or "outflows" (column AC)
When AC says "inflows", AQ should be positive, and when AC says "Outflows", AQ should be negative.
I need the text in column AQ (the monetary amount) to become red when the the opposite is true.
i.e. When AQ is negative and AC says "Inflows", AQ should become red. And when AQ is positive and AC says "Outflows", AQ should become red.
how can we disable/enable a cell based on a condition which is dependent on other cell data
View 4 Replies View RelatedI'm trying to set it up so that if a particular cell has any data in it, the contents of a different cell get sent to another. I want the no data/data to serve as a trigger.
As an example, if I put anything into cell A3, I want the contents of cell A1 to copy to H1. I'd also like it to be dynamic so that if I put something into cell B3, the contents of B1 get copied to H1, etc.
I have a workbook sheet change condition that, when triggered runs the following code (amongst others).
[Code] ......
What I would like is to amend the above (possibly in a loop?) so that it skips the rows in which the value "New" features in range F17:F190.
So basically Autofill as per the code but leave the values in the cells of the range in which New features in range F17:F190
I had an report and the rows of the report needs to be colored based on another cell value. My layout looks like this:
A1B1C1D1AVG
1011121330
14151617100
18192021400
For each cell, i need to compare the value of cell with that value in AVG coloumn and if condition is met, cell should be colored. Eg : If first cell value under A1 is Less than 0.2 * AVG of first row then color of the cell A2 should be red. After coloring the entire rows, then i should check and color the header row based on the color of Rows.
I tried first one, i,e coloring the rows based on conditional formatting and then written VB code to compare the color of rows and colored the header row. But the color index used in conditional formatting and the code are mismatching and the desired output is not coming.So decided to write code for coloring the rows cell.
I've schedule header date 1-oct,2-oct,3-oct.....etc and have two cells Last Date and Hours I need from those cells once i add date and hours to copy the hours and paste in schedule header in the exact date..
for example
#
Last date
Last Hours
[Code]....
but was too slow takes long time.
2nd VBA code to copy last hours to schedule date based on condition on last date cell.
I would like to filter my list to show rows with a date difference of >0 (raised date later than date of contact) and move certain cells onto another sheet in the same workbook.
e.g if diff in F1:F1000 is >0, populate the following onto this sheet
Job no - Address - Postcode - Name - Date raised
Would this be a case of using a vlookup? having a few problems with it at the moment
I am trying to get a Sumifs to work where one condition is activated based on a cell value.
SUMIFS($E$2:$E$6,$A$2:$A$6,"=Region",$B$2:$B$6,"="&B1). I have a drop down in cell B1 that lists all the products.
I want the condition to be active only when I make a selection in the drop down, if I don't then I want the Sumifs to ignore the second condition and do a Sum on Region.
I am trying to automatically merge cells based upon a condition in different cell. Below is the example of what I would like to achieve.
Apple
Red
Apple
Red
Apple
Red
[Code] ......
I have 8 columns of data, the first 4 and the last four columns have the values which correspond to each other.. Here is an example:
VALUES(A to D)NAMES(A to D)
ABCDABCD
1.3451641.3383581.286221.359808321325370391
So value 1.345164 corresponds to 321 and 1.28622 to 370. I need a function that will return a value from one of the VALUES columns which corresponds to the second smallest cell value from the NAMES columns. For example – here the second smallest number in NAMES column is 325 so the function would return the corresponding value of 1.338358.
i m trying to format a cell so that it colours in red when a specific text is chosen in another cell, ive tried conditional formatting but I cannot get it to work. e.g column A has a drop down list, if GB or IEN is chosen in that cell then cell in column K will become red. (as if these two are chosen then they have to input a number into column K). Once they have inputted the number into column K i want it to go back to its original format. Or if they dont select GB or IEN then it would stay in its original format aswell.
View 2 Replies View RelatedI need to force our salespeople to enter information in a cell based on a condition. This is the condition: If I5=3, then I need to move the user to cell I3 with a message that says "Enter miles to site" -- I don't want them to be able to move from the cell until they enter the information. If I5 does not equal 3, then I don't need anything to occur. I need to apply this code to four separate worksheets in the same workbook. Also, they will be entering a number in cell I3, so is okay to leave I3 formatted for Number or General Number? Note: This question is also posted at the following link, but has not yet been answered by that group: http://database.ittoolbox.com/groups...dition-2270643.
View 2 Replies View RelatedI am working on creating a simple Excel Database of an Engineering Tool Room Inventory for work. However I can not seem to get one particular 'NESTED IF Function' to do what I want it to do. (In advance warning, I may be going down the wrong route and might have used the wrong Formula in Excel but from my understanding the 'IF' function seemed the most plausible.
Issue: All I would like to do is for a NESTED IF Function to be able to say this:
1. When a user inputs data into one column, for example 'Column A', with the following data: 4" Square
2. Then the neighbouring column, for example 'Column B', would have a NESTED IF Function.
3. Which would output a logical response, "A, B, C, D, E, F etc...", depending on what is written in Column A.
If 'Column A' - 4" Square, Then 'Column B' - A
If 'Column A' - 5" Square, Then 'Column B' - B
& So on...
But the NESTED IF Function should only put a logical response if there is certain values within the cell, for example:
User types a value into 'Column A' which contain - 4 & S, Then 'Column B' - A
User types a value into 'Column B' which contain - 5 & S, Then 'Column B' - B
& So on...
Currently to do the above function, I have utilised the following Excel NESTED IF Function:
[Code] .....
& The following happens:
1. User inputs data into 'Column A'
2. The NESTED IF Function then provides an automatic response.
3. However it relies on the data being inputted without the ' " (Quotation Symbol)'
4. & With me defining the exact phrase that should be typed into the cell, for example, "4" Square"
Other: I have attached an example worksheet of the NESTED IF Function in practice, with two tables. One showing what is happening with the code above and one table showing what I would like to happen but with no function.
Example - IF Function.xlsx
What I would like to do is remove part of an email address from a cell.
Ex. if the was a cell that contained "someone@somewhere.com" I would like to make that cell only contain "@somewhere.com"
I am trying to write a formula to figure out Body Mass Indexes for certain age groups and whether or not they fall into a High or Low risk category. So, I am trying to write a formula that does the following. I have 3 columns, Gender, Age and BMI. I need the formula to do the following.
IF Gender = M AND Age >18, <39 AND BMI >7%, <19%, Then return an "L" into 4th column
IF Gender = M AND Age >18, <39 AND BMI >19%, Then return an "H" into 4th column
IF Gender = M AND Age >40, <59 AND BMI >14%, <23%, Then return an "L" into 4th column..............................
So I have one sheet that needs to pull data through to another sheet (which is a stats summary)
I have a drop down list containing 4 options all of which have to be counted separately on the stats summary sheet. However I only need them counted when a value is input in another cell in that row.
For example: I select option 1 from down down menu, but I only want this to be counted on the stats page when I enter a date in the "date" cell.
I am trying to perform a calculation in a cell that leaves the value 0 if before Feb 2014, changes to the value of another cell in Feb 2014 and leaves the value unchanged if after Feb 2014. I can get to the Feb 2014 value but after that month the value changes to 0.
The Cell formula that I am trying to use is as follows:
=IF(YEAR($A$3)<2014,"0",(IF(YEAR($A$3)>2014,H114,(IF(MONTH($A$3)<>2,H114,AA118)))))
A3 contains TODAY()
H114 is the cell being calculated
AA118 is the cell containing the calculated value for the current month.
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I have a a client who sends me an excel workbook quarterly. There are 90 worksheets and each has 20 language columns which are suppose to be the same on each worksheet.
My Problem is I want to merge them into one worksheet so i can add them to a database, but the client keeps changing the order of the languages!
So as an example I need to be able to identify the Polish, Russian and English columns on every worksheet and then combine each language to a new column on a new worksheet.
I have three columns in the spreadsheet.
sheet1
A BC
Santhosh314
Praveen224
Praveen012
Praveen37
Santhosh38
Praveen120
Praveen036
Santhosh19
In another sheet (sheet2) output come like this.
A B
Praveen 3/7
Santhosh 3/8
In this file i did paste special values so the links are no longer there, but in my original file alot of the values you see in the cells are pulled from other worksheets ( thats just so you know to lookin values of the cells and not the formula ).
I basically need row 18 starting from Column O to self populate.
Its based off of which has 1's in the Column. I have the completed here manually just to show you what i am looking for . I usually have to go to row 3 and Enter the data manually depending on which 1's are filled in for the column.
If i could have a method of having row 18 starting with Column O to self populate based off those 1's
I am curious if there is a way to combine the content of rows based on a change in account number(column A). The tricky part of it is that an account number could be in the file once and another could be in the data twelve times. The list is sorted by account number. I want to take the product code and description and keep placing in the combined row for each account number. Attached is a sample of the data.
View 6 Replies View RelatedI searched and searched and I can't find an easy way to do this without using Access which I am rubbish at. Is there an easy way to do the following in Excel.
I have several thousand records by row each with a unique numerical identifier. The unique identifier is the "Household". Within the household there are sub "Accounts". The sub accounts are truely unique. All the "Accounts" are in the same column.
What I am trying to do is combine the records into one row per "Household" with the accounts listed in successive columns. The maximum number of accounts there may be is 7 but it can be as few as 1. Example:
BEFORE
HH Acct
1 1234
1 2345
1 3456
1 4567
2 9876
2 8765
3 1113
4 5556
4 4447
4 3335
AFTER
HH Acct1 Acct2 Acct3 Acct4 Acct5 Acct6 Acct7
1 1234 2345 3456 4567
2 9876 8765 8765
3 1113
4 5556 4447 3335
I want to total column C, but only where column B contains certain data, like add column C where column b contains abd so that i get the answer 7, Hope ive explained it right.
B C
abd 1
abd 2
bmr 3
abd 4
crc 2
crc 3
bmr 2