I have two formulas that I have worked out to deliver the results independently. I would like to join them together into one formula and add an If condition that if the two match then add a "+" to the end of the string.
#1 finds the base value :
=IF(ISERR(FIND("/",I2)),I2,LEFT(I2,FIND("/",I2,FIND("/",I2)-1)-1))
#2 verifies the value is a valid color:
=INDEX(M1:M41,MATCH(J2,M1:M41,0),1)
I would like to join the two formulas together and if they match then add a space, " " and a "+" to the end of the string. If there is no match then return the base value.
I'm looking to return the values in column A adjacent to the cells in Column B equal to "Y". The kicker has been returning only the cells where the condition is true. Column C displays the desired behavior.
The closest I've been able to get is with a simple IF statement but I'm pretty sure the answer is a far cry away from there and likely requires an array formula. I'd prefer not to use VLOOKUP or OFFSET but will if the alternative is very complex.
I need cell (O4) to display days overdue or days remaining on an assigned task based on subtracting due date (M4) from todays date, but only perform days subtraction function if (M4) is not blank and only if task complete cell (N4) is less than 100.
Have the conditional blank cell figured out, but nesting another condition for the less than 100 complete cell. So in other words, I don't want cell (O4) to subtract days and display any error, irrelevant data if there is not any due date entered or the task is entered as complete...
I want to perform a SUMIF if more than 1 condition is true. I can do a regular SUMIF if, for example, values in column A is > than 10,000, then SUM associated values in column F.
However, what if I want a SUMIF if values in column A is > 10,000, values in column B = “Yankees”, then SUM associated values in column F.
Is it possible to have excel continually check if a columns used row count in a particular column is greater than a number before moving on to the next part of code?
The reason I'm doing this is because one formula will pull in data from bloomberg which can take some time (5 seconds or so).
Some other code that places formulas into other adjacent columns depends on the number of rows in the first column. So the code following the data pull wil fail if the above hasn't finished pulling yet.
I was thinking about doing something like a do nothing until true?
Here's what I have that is not working:
Do Until Range("A1:A6").Cells.SpecialCells(xlCellTypeConstants).Count > 5 Range("F1").Select Loop
I expect that the number of used rows in column A should be greater than 5 once data is pulled. In this case I just had VBA select F1 until the count was greater than 5 before moving on. but I think it's interfering with the pull and will coninue to loop..
I'm looking for some help. I need a function that can check if each of two seperate values is less than one. If less than one then divide by 2. Then give me the average of these two values. So it could be that it takes 0.5/2=0.25 for one value and 3 for another to give me the average of 1.625.
I've been looking for a way to get the needed result without using macro but i think it can't happen. I'm using excel for forecasting
I need a formula or script to Vlookup a value for me from another sheet if depending on the date.
If the Today date is > then the Date mentioned in Cell A1+15 days i want A2 till A167 to run a formula that would lookup a certain value in another sheet and replace the current value in A2 till A167
For example
A1= August A2 = 20 A3 = 40 ......
I want when im in 15 August a formula that will replace the foretasted quantity 20 with the real quantity found in sheet 2. If I am not 1 August i don't want the formula to run.
if there's a macro that can be run to check one worksheet. In this worksheet there is a column where the value should be "true". If this value is true, I'd like to copy the entire row of data into another worksheet.
There can be multiple rows of data where this condition is met.
I would like to know if there is a way to change the font type in a cell, if a condition is true in another cell. e.g font in cell C3 is Arial Rounded MT Bold and if condition is true in cell F3 then font is changed to Arial Narrow.
if B2 value (red column) of datahave tab is equal to B2 value of red column in lookup tab then B2 value (red column) of datahave tab is equal to A. if B2 value (red column) of datahave tab is equal to B3 value of red column in lookup tab then B2 value (red column) of datahave tab is equal to B. if B2 value (red column) of datahave tab is not equal either B2 and B3 value of red column in lookup tab then B2 value (red column) of datahave tab is equal to H.
[code]....
i tried normal Hlookup but i do not know how combine multiple IFs to solve my problem.
I have so data I am trying to combine based on count value of investment on Col A. If it appears more than once on col A then I want the col B values on col D. I have macro that works but I need make sure if Col B have any TRAC and TRL1 then I want to add that on Col D. For example so Col D1 would be EURX, TRL1 at 83.50, FTID and Col D5 would be TRAC at 87.88, Markit. Below is the macro.
the biggest problem is that this formula does not work as it is. Or is there some other function than networkdays that i could use?
The purpose of the formula is to count how many "objects" that are in service have been there for over 20 days. There a a few other criteria also, but sumproduct takes care of that. Can networkdays even be used the way i´m trying to?
I'm importing some data from an HTML table into excel, it all formats pretty well except that some of the data appears on multiple rows.
A B C 1 01.02.06 John 2 Bob 3 Sam 4 02.03.06 Jim
What I need:
a b c 1 01.02.06 John, Bob, Sam 3 2 02.03.06 Jim 1
What I need to do is get all the items in the colum B which are listed under the same item in column a, in the first case John Bob and Sam and put them all into the same cell. I then want to delete the empty rows. It's important that this is done by testing to see if column A is blank, rather than using the date.
then in column C I want to count the items in column B, ideally then repeat the script for the whole sheet.
Not a clue of the type of syntax I should be using though! In fact there's probably a better way of importing the data from the HTML so it doesn't even need to be done this way! of course I'm oblivious to it. Auto Merged Post Until 24 Hrs Passes;Thinking maybe I didn't make myself properly clear....
If a cell in column a is empty then it means the item in column b needs adding to the end of the item in the row above in column b.
I would like to have cell A3 contain two different formulas. I may be doing this wrong, so here is what I would like to do:
Cell A1 will contain a number that will change from month to month, but will need to show as $0 until then. Cell A2 will contain a fixed sum number from month to month Cell A3 will contain the difference between cell A1 and A2
I wouldl like cell A3 show as $0 until a number is inputted into cell A1
A1 $0
A2 $2000
A3 $0
The formula I have in cell A3 is =SUM(A2-A1), but cell A3 shows $2000. I remember doing this before, cut can't remember the exact formula. Something like =if(A1
i have 2 worksheet function IF statements that of course look for certain conditions, but in some instances i need to combine the IF statements in one cell, the 2 i need to combine are below:
so what i need is for the cell to show either Sick, Swapped or the contents of Sheet2!B3 however if both C1 and G1 show Line Off then cell must be blank, which is what i achieve with the second if statement.
I have an excel sheet that have a large set of datas. In these datas in one column most of the datas are indicated as green but some of them are red. I can pick the red ones by using filter option but I also wanted to show the red cell values in one cell. For example, Cell1;Cell2;Cell3 like this (the ; should be between them). I try to use macros but that is not the program that I have full knowledge about it. S
i have about 100 worksheets in my workbook ..i need to combine them into one worksheet ...all my 100 worksheet has many formulas in some of the cells.
i want to combine all the worksheets one below the other with a gap of 5 blank rows after each worksheet contents....i just want the values in each worksheet to be pasted and no formulas...
I need to combine the following formulas into one but obviously it won't work due to the limitations. Would the following be better using VBA? If yes. At the moment, they are in 3 separate columns and working but indepenantly. It basically says, if the agreement is older than todays date, write expired, if not if its for 12 months, then calculate the percantage according to number of days. and so on for 24 months and 36 months...................
