I would like to filter my list to show rows with a date difference of >0 (raised date later than date of contact) and move certain cells onto another sheet in the same workbook.
e.g if diff in F1:F1000 is >0, populate the following onto this sheet
Job no - Address - Postcode - Name - Date raised
Would this be a case of using a vlookup? having a few problems with it at the moment
I would like to generate a dynamic list of employees on sheets based on information on Sheet A. Here is my workbook structure:
-Sheet A contains all employees information (Name, division, salary hire date, etc)
-Sheet B is named Div A
-Sheet C is named Div B
-Etc...
Here is what I want to happen:
-Sheets B should pull the employees name and salary from sheet A only for employees of division A
-Sheet C should pull the employees name and salary from sheet A only for employees of division B
-Etc..
Sheet B, C , etc. should update the info and resort every time sheet A is updated.
I have a drop down (look up list) labeled Equipment that retrieves information from another sheet in my workbook.
I have a second field labeled Equipment Sub Type where I need a drop down list based on the information retrieved in the Equipment Field.
Each item in the Equipment List Drop Down has a corresponding list in my lookup sheet of my workbook.
Is it possible to take the information below and make one list out of columns F, H and J based on the common information in column C? For example, group all the 18s in a list, followed by the 44s.this is excel 2007
column CColumn Fcolumn Hcolumn J
Option code
18180L12369301/123/54
18180L12369301/123/54
18180L12369301/123/54[code].....
I have 2 dropdown lists.
The 1st shows the portfolio list and the 2nd one should display project names based on the portfolio selection in Dropdown1.
My data resides in another sheet where Column B is the Portfolio list,Column C project list and Column D to X some data related to the project.
I have to give cell link reference to the project selected in dropdown 2 so that the other values in the dashboard changes based on a vlookup formula.
I have attached the sample sheet for reference with some dump values.
Dashboard sample.xlsx
Lets say we have data in Column A, B, C and D and no row left blank. In the column A no cell left blank however in B, C, D any one cell only contain a value in that row. If B10 has any value in it then C10 and D10 are left blank (not empty). I want to segregate the data in Column A based on the value in B, C or D. So this one column data ( that is Column A) will split into three column. this segregated data to be put in E, F and G.
Wherever Column B has any value that's greater than zero content from the column A from the same row should copy to the E, Wherever Column C has any value that's greater than zero content from the column A from the same row should copy to the F, Wherever Column C has any value that's greater than zero content from the column A from the same row should copy to the G.
I am trying to create a drop down list that shows the description of different codes. i.e.
1000 - Straight time
1010 - Vacation Time
1020 - Sick Time; etc.
In the spreadsheet, I only want the number to show (1000, 1010, or 1020).
I am looking for a macro to rename tabs based on information in A1 on each tab. The thing that is causing me issues is the cell A1 has a formula in it and it changes on a daily basis with days of the week but the tab only updates when i double click A1 and press enter.
I need it to update automatically.
I have one column that contains a monetary amount (column AQ) , and another that contains text reading either "inflows" or "outflows" (column AC)
When AC says "inflows", AQ should be positive, and when AC says "Outflows", AQ should be negative.
I need the text in column AQ (the monetary amount) to become red when the the opposite is true.
i.e. When AQ is negative and AC says "Inflows", AQ should become red. And when AQ is positive and AC says "Outflows", AQ should become red.
I have created a gradebook template so that I can keep track of my assignments as I get them and keep on top of my grades. Any way that I can code excel to work so that if my current average in the class ever drops below 70%, I want the color of the text to change to red to alert me that the grade is too low and needs to come up. I'm new to using VBA in excel and not sure how to do it or what to code.
View 8 Replies View RelatedI have a worksheet, with a "cost" column, and a date column. I have another sheet with dates pre-written, and a cost column as well. I'd like to know how to make the cost from worksheet 1 go to worksheet 2 under cost, but also add up any costs that are on the same date.
View 9 Replies View RelatedI am putting together a register of information and it is broken up over a number of sheets i.e. LOG1, LOG2 etc.
I have a master sheet in which I want information to automatically populate based on whether a certain column has the words yes or no.
Ie Column I in LOG1 or LOG2 etc can either be yes or no. Is there a way to populate the Master sheet only with the information of a row in which column I is yes?
I know it would have to be a formula in the master sheet which checks all the sheets and then somehow populates the master sheet downwards if anything is yes but then removes it once that yes becomes a no....
I have a spreadsheet using an Input Form (user cannot get to the spreadsheet to enter data - they must use the form). This is working well.
What I need to do now is allow the user to retrieve data that is already entered. Example: Spreadsheet has 100 unique records (rows). In each is ID, Name, State, Dues, and about 20 other columns of information.
I need to allow the user to key the ID # and then up pops all the other information for just the ID provided. I will also need the ability for them to then change that information if needed.
So if they key 13WIL they will get Wilson, TX, $50, etc. And then they can make changes to any field needing a change. Add a phone, change and address, etc.
how can we disable/enable a cell based on a condition which is dependent on other cell data
View 4 Replies View RelatedI'm trying to set it up so that if a particular cell has any data in it, the contents of a different cell get sent to another. I want the no data/data to serve as a trigger.
As an example, if I put anything into cell A3, I want the contents of cell A1 to copy to H1. I'd also like it to be dynamic so that if I put something into cell B3, the contents of B1 get copied to H1, etc.
I have a workbook sheet change condition that, when triggered runs the following code (amongst others).
[Code] ......
What I would like is to amend the above (possibly in a loop?) so that it skips the rows in which the value "New" features in range F17:F190.
So basically Autofill as per the code but leave the values in the cells of the range in which New features in range F17:F190
I had an report and the rows of the report needs to be colored based on another cell value. My layout looks like this:
A1B1C1D1AVG
1011121330
14151617100
18192021400
For each cell, i need to compare the value of cell with that value in AVG coloumn and if condition is met, cell should be colored. Eg : If first cell value under A1 is Less than 0.2 * AVG of first row then color of the cell A2 should be red. After coloring the entire rows, then i should check and color the header row based on the color of Rows.
I tried first one, i,e coloring the rows based on conditional formatting and then written VB code to compare the color of rows and colored the header row. But the color index used in conditional formatting and the code are mismatching and the desired output is not coming.So decided to write code for coloring the rows cell.
I have so data I am trying to combine based on count value of investment on Col A. If it appears more than once on col A then I want the col B values on col D. I have macro that works but I need make sure if Col B have any TRAC and TRL1 then I want to add that on Col D. For example so Col D1 would be EURX, TRL1 at 83.50, FTID and Col D5 would be TRAC at 87.88, Markit. Below is the macro.
View 9 Replies View RelatedI would like to know how to open multiple excel files from a folder based on the information based in cells down a certain column until the last cell.
I thought it might be something like this but it isn't: ....
if a macro or private macro is necessary, I would need basic instruction how to use those as well (I mentioned private macro as I understand they automatically run whenever worksheet info is changed, which I would like in this example.)
I'm simply trying to change fonts in cells based on the inputs of other cells. Obviously, using conditional formatting doesn't allow for this.
For my example, assume the word "MrExcel" is in cells D2, F2, H2, J2, L2, N2, P2 and R2. If I type different font names (Times New Roman, Arial, Bookman, etc.) in the cells to the immediate right of each word "MrExcel," -- cells E2, G2, I2, K2, M2, O2, Q2 and S2 -- I would like the "MrExcel" word in each corresponding cell changed to the corresponding font to the right. I would like the ability to do this for up to 15 different fonts. There will be many rows to this worksheet I need to use this process for.
Is this possible? I'm in a bit of a jam and have exhausted my knowledge of formulas in that they won't work in this case ... I'm assuming I need to delve into the unknown land (to me) of macros, private macros, or VBA.
I've schedule header date 1-oct,2-oct,3-oct.....etc and have two cells Last Date and Hours I need from those cells once i add date and hours to copy the hours and paste in schedule header in the exact date..
for example
#
Last date
Last Hours
[Code]....
but was too slow takes long time.
2nd VBA code to copy last hours to schedule date based on condition on last date cell.
I am trying to get a Sumifs to work where one condition is activated based on a cell value.
SUMIFS($E$2:$E$6,$A$2:$A$6,"=Region",$B$2:$B$6,"="&B1). I have a drop down in cell B1 that lists all the products.
I want the condition to be active only when I make a selection in the drop down, if I don't then I want the Sumifs to ignore the second condition and do a Sum on Region.
I am trying to automatically merge cells based upon a condition in different cell. Below is the example of what I would like to achieve.
Apple
Red
Apple
Red
Apple
Red
[Code] ......
I have 8 columns of data, the first 4 and the last four columns have the values which correspond to each other.. Here is an example:
VALUES(A to D)NAMES(A to D)
ABCDABCD
1.3451641.3383581.286221.359808321325370391
So value 1.345164 corresponds to 321 and 1.28622 to 370. I need a function that will return a value from one of the VALUES columns which corresponds to the second smallest cell value from the NAMES columns. For example – here the second smallest number in NAMES column is 325 so the function would return the corresponding value of 1.338358.
i m trying to format a cell so that it colours in red when a specific text is chosen in another cell, ive tried conditional formatting but I cannot get it to work. e.g column A has a drop down list, if GB or IEN is chosen in that cell then cell in column K will become red. (as if these two are chosen then they have to input a number into column K). Once they have inputted the number into column K i want it to go back to its original format. Or if they dont select GB or IEN then it would stay in its original format aswell.
View 2 Replies View RelatedI need to force our salespeople to enter information in a cell based on a condition. This is the condition: If I5=3, then I need to move the user to cell I3 with a message that says "Enter miles to site" -- I don't want them to be able to move from the cell until they enter the information. If I5 does not equal 3, then I don't need anything to occur. I need to apply this code to four separate worksheets in the same workbook. Also, they will be entering a number in cell I3, so is okay to leave I3 formatted for Number or General Number? Note: This question is also posted at the following link, but has not yet been answered by that group: http://database.ittoolbox.com/groups...dition-2270643.
View 2 Replies View RelatedI am trying to create a formula that will change the cell color in a range of cells in the row. I want the color to change based on the information in a particular cell appearing on a different sheet. What sheet the information is on determines the color the cells change to.
Example: I have 4 sheets I am working with. We will call them A; B; C; and D. I would like the color of cells A5-I5 on sheet D to change to red when the information in cell A5 from Sheet D shows up in any cell in column A on sheet A. If the information from cell A5 sheet D appears in any cell in column A from Sheet B then the color will be yellow, etc.
I am working on creating a simple Excel Database of an Engineering Tool Room Inventory for work. However I can not seem to get one particular 'NESTED IF Function' to do what I want it to do. (In advance warning, I may be going down the wrong route and might have used the wrong Formula in Excel but from my understanding the 'IF' function seemed the most plausible.
Issue: All I would like to do is for a NESTED IF Function to be able to say this:
1. When a user inputs data into one column, for example 'Column A', with the following data: 4" Square
2. Then the neighbouring column, for example 'Column B', would have a NESTED IF Function.
3. Which would output a logical response, "A, B, C, D, E, F etc...", depending on what is written in Column A.
If 'Column A' - 4" Square, Then 'Column B' - A
If 'Column A' - 5" Square, Then 'Column B' - B
& So on...
But the NESTED IF Function should only put a logical response if there is certain values within the cell, for example:
User types a value into 'Column A' which contain - 4 & S, Then 'Column B' - A
User types a value into 'Column B' which contain - 5 & S, Then 'Column B' - B
& So on...
Currently to do the above function, I have utilised the following Excel NESTED IF Function:
[Code] .....
& The following happens:
1. User inputs data into 'Column A'
2. The NESTED IF Function then provides an automatic response.
3. However it relies on the data being inputted without the ' " (Quotation Symbol)'
4. & With me defining the exact phrase that should be typed into the cell, for example, "4" Square"
Other: I have attached an example worksheet of the NESTED IF Function in practice, with two tables. One showing what is happening with the code above and one table showing what I would like to happen but with no function.
Example - IF Function.xlsx
What I would like to do is remove part of an email address from a cell.
Ex. if the was a cell that contained "someone@somewhere.com" I would like to make that cell only contain "@somewhere.com"
I tried all failed.We have about 160 different workbooks (one for each business unit) stored online. Staff enters information about their weekly revenue and expenses and here at head office I collect that information and consolidate them.What I am trying to do is that;1.) Create a master Workbook with ~160 worksheets (One worksheet for each unit) named exactly the same with other workbooks2.) And macro can pull the information from related files stored in a certain folderIt is very much like another members problem but I am not sure why I cant get that code working for me? [URL]
View 5 Replies View Related
