Equivalent Of A Double Conditional In The Function SUMIF?
Mar 9, 2014
I need the equivalent of a double conditional in the Function SUMIF.
In my example (a test file is attached), I have used hypothetical stock trades as a test case.
Column B has the type of order (Buy or Sell).
Column C has the stock trading symbol.
Column F has the net amount of the transaction on that line.
I want to populate Columns I & J, where I & J are the total Buy and Sell cost for each stock listed in Column H.
So, for example I need to calculate the total "Net Amount" of "Buy" transactions for Stock ABC, and put it in Cell I2. I also need to put the the total "Net Amount" of "Sell" transactions for Stock ABC, and put it in Cell J2.
I'm sure that looking at the attached sample EXCEL workbook, will make it clearer than all my verbiage.
So, conceptually, I need to evaluate Columns B, C and F and put the sum of transactions in Cell I2 for those cases with "Buy" in Column B AND "ABC" in Column C.
If there is no syntax for a double conditional in SUMIF, then I'd be happy with any formula for Cell I2 that accomplished the tax.
I'm not terribly familiar with array formulas, but have used them on occasion if that's what's required to emulate a double conditional in SUMIF.
View 9 Replies
ADVERTISEMENT
Sep 1, 2006
I was wondering if it is possible to have a double sumif. For example asssuming you have a table with three columns:
Col 1 (far left) is called Name
Col 2 (middle) is called date
Col 3 (far right) is called values
Now assuming that column 1 contains 4 different names, each repeated for each date in column 2. In turns the dates are repeated for each names (see below example)
Name Date
AAA Jul 06
AAA Aug 06
AAA Sep 06
BBB Jul 06
BBB Aug 06
BBB Sep 06
CCC Jul 06
CCC Aug 06
CCC Sep 06
Column 3 contains random values.
How can I sumif column 1 at the same time as column 2 (i.e. sumif for criteria AAA and Aug 06). Or if not possible is it possible to write a double Vlookup?
View 9 Replies
View Related
Nov 16, 2013
I have a worksheet (named Deduction Worksheet) that is a running record of all part removals. A removal is denoted by a row entry that contains removal particulars. The first column (Column A) in each row contains a unique number for each part. Column K shows how many part units were removed in that removal:
Column A
... Columns ... B to J ...
Column K
Unq001
various
[Code]....
In the code above 'crng' is the criteria range, 'sValue' the criteria and 'srng' the sum range (which follows the normal SUMIF function within a worksheet). Both the 'crng" and 'sValue' values contain text, / and numbers.
note that other elements on the userform code look at data on other worksheets (not sure if this will effect this).
View 5 Replies
View Related
Jun 9, 2009
I've searched the boards & haven't found anything as uncomplicated as what I'm looking for. I know I could use Sumproduct, but for something this simple is there anything I can do with Sumif? This in effect is my worksheet.
AB
1AD200=SUMIF('Sheet2’!B:B, A1, 'Sheet2’!C:C)
All I want to do is change the criteria to be the equivalent of A1 OR B2 (ie checking the range for either match. No way to do that in a sumif? I'm looking for the least complicated, easiest to adjust/edit formula possible.
View 3 Replies
View Related
May 28, 2012
I've been learnig VB applying it to automating some excel workbooks. What I'd like to know is if there's an equivalent funtion in VB to the IN function in Pascal. The In function in Pascal used to work like this:
If I used the KeyPress (Function in Pascal), I could evaluate which key was pressed and compare it to an array of options. For Example:
HTML Code:
if Chr(KeyPressed) IN ["0".."9",".","+","-","*","/"] then
Expression = Expression + Chr(KeyPressed)
Instead of Comparing each option separadtly. Now my question is whether or not there's an equivalent function in VB.
View 6 Replies
View Related
Mar 8, 2013
When I need to return numerical data with multiple criteria, I use the SUMIFS and it works fine. But when I need to return a text string, the function is not called for. What function can I use to make this happen? I've tried SUMPRODUCT, which I've had success with in the past, but it's not working this time. Maybe I'm laying it out wrong, but this is how I currently have it:
=SUMPRODUCT(column of text to be returned,((column of criteria1)=criteria1)*((column of criteria2)=criteria2))
Do I need to fix this formula or use something else?
View 2 Replies
View Related
Mar 14, 2007
I am in need of some excel advice relating to date calculations. Basically I need a function that is the equivalent of WORKDAY but for hours instead. I have a series of events that take a certain length of time to complete, most of them less than a day but some more than. By way of example see the screenshot below:
In reality the last three operations would have to take place on the 27th of April, with the Welding operation starting on the end of the 25th around 7pm. The plant is running a 24 hour day, and works 5 days a week. How can I calculate the times in hours offset rather than going day by day? I need to account for
* Weekends
* Fixed Holidays
* Operations running as seamlessly as possible
Any advice welcome. I have attempted to use WORKDAY with the number of days to deduct rounded to the nearest day and then subtracting the operation time but this results in errors where operations would cumulatively go over a working day. The objective is by knowing when the end product is needed and knowing how long each operation takes it is possible to discover when to start manufacture. VBA or Formula code is fine as this will be integrated into a VBA project.
View 6 Replies
View Related
Aug 27, 2012
I am looking for a conditional formula that can be applied to a cell so that when I enter a number with a positive value, it:
1) Converts it to its negative equivalent value.
2) Displays in the value in the cell with parentheses around the number to indicate that the value is negative.
I am trying to do this without having to reference another cell to provide the entry or display the outcome.
View 1 Replies
View Related
Oct 25, 2007
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
View 9 Replies
View Related
May 14, 2013
Function Haversine has correct value in debugger but in cell it has the same value as Haversine2. Is this a known bug?
Public Function Haversine(lat1 As Double, long1 As Double, lat2 As Double, long2 As Double) As Double
Dim temp As Double
[Code]....
View 9 Replies
View Related
Dec 1, 2008
I have a spreadsheet that I'm working on that compiles survey data from an online survey. I have averages, high scores, low scores, etc. figuring off of my data to product charts and graphs for a client. I am attempting to find the high and low scores for individual surveys (there are 1054 surveys total right now). I know of max and min, but I really need something that would function like a "maxif" (which I realize does not exist).
Here's the problem:
In column A, I have a list of insurance provider names per survey (so, 1054 entries total). I then have some columns in between that show scores on questions from the survey, and then column AB contains my averages for each individual survey. Column AD has a list of the insurance provider names in alphabetical order (there are 167 unique provider names used in the 1054 surveys). Column AF is my high score column and lines up with column AD (so, I am looking to have 167 high scores in total as I want the high score per each provider, not survey). Let's pretend A2:A10 say "Anthem Insurance." I want to create a formula that would basically say something like:
Count what rows in column A = "Anthem Insurance," then match those cells to AB (so, it would figure since A2:A10 are the targeted cells, then I also want to correspond to AB2:AB10) and give me the high score (MAX) for that range of cells. Is there a way to do this? Otherwise, I have to manually go through all 1054 rows and see what range of cells equal a certain insurance provider name to get those 167 high scores. I can keep doing this if I have to, but this data changes every single week and it eats up a lot of time.
View 4 Replies
View Related
Sep 30, 2009
I have a spreadsheet that just uses the basic "SUM" function. This morning I went to use it and the function does not work after I change a number within the field of that function. If, however, I go into the SUM function and double click, then hit enter, it does the new calculation.
View 3 Replies
View Related
Aug 15, 2006
If you run the Int function on a product of two variables, it will return a different (wrong) result if the variables are both defined as single:
Sub roundingtest()
Dim a As single
Dim b As single
Dim cases As Integer
a = 18200
b = 0.01
cases = Int(a * b)
Debug.Print cases;
End Sub
this returns 181 instead of 182. If you define one of the variables as double, then it works fine. Is it just me?
Anyway, I found it to be quite useful, as i was trying to get a function to round to the first higher integer - as opposed to the first lower. so
182.1 -> 183
182.9 ->183
182 ->182
So weirdly enough, int(a*b)+1 does the trick! Of course if a or b is defined as a double, then it all goes to 182. So without any IFs, this works real nice!
View 4 Replies
View Related
Aug 1, 2013
how to use the indirect function to pull data from a pivot table. This is the formula I am trying to recreate: =GETPIVOTDATA("sum of BOE",$A$14,"CLASS","PROVED","Years",2013)
I can't seem to get the indirect function to work properly with the words in double quotes, such as "PROVED". How do I format that part of the formula properly?
This is as far as I can get. =GETPIVOTDATA("sum of BOE",INDIRECT($M13),"CLASS","PROVED","Years",$N13) $M13 refers to $A$14 and $N13 refers to 2013
View 2 Replies
View Related
Apr 7, 2009
I have a spreadsheet in which I am trying to track invoices billed according to month in question. For example, I need to find total invoices billed in February for ABC Consulting Company. I have a database in the same spreadsheet that contains all invoices billed for an entire year for all companies. How do I pull invoices for a particular month only, in this case for the month of February? I have attached an example of spreadsheet in question. Included is a tab which indicates desired results.
View 5 Replies
View Related
Jan 16, 2007
I have been trying to figure this out for days and have searched on all the postings and cannot find my answer. I am working off of two worksheets. Sheet #1 has 3 columns. Column A "Type of Bar", Column B "Type of Activation", Column C "Amount Spent". Column A has 2 drop down boxes, Pub & Nightclub. Column B has 2 drop down boxes, Sampling & Training. Sheet #2 is is a tracker that is going to add up certain criteria off of Sheet 1. For example, I need to get the sum of All Pubs and Sampling. I also need to track All Pubs and Training, Nightclub and Sampling and Nightclub and Training. I have tried the SUMIF, IF, and Conditional Sum. I keep running into a RANGE error.
View 2 Replies
View Related
Apr 17, 2009
I am trying to used the sumIF function in refer to a particular value, e.g. Name 1.
Question 1 - What formula I can used to make sure the SUMIF function refers to that specific value, e.g Name 1?
Question 2 - Is my SUMIF function correct to calculate the SUM of hours to a Task? This is due to the data table setting? find attached:
View 3 Replies
View Related
Jul 14, 2009
I am using Excel 2003. Worksheet named: Table_Data has the following code in cell: B2
View 3 Replies
View Related
Nov 6, 2009
Sum amts based on first left character of code
code amts
102 100
200 500
101 100
results
1 200
2 500
View 9 Replies
View Related
Aug 19, 2013
I'm having a little problem with the function Sumif. I have data like this:
Date
0
0
Total
0
78[code]...
I want to some all the Totals that appear before the "End Notification" text. I have more totals after that text and the number of rows are variable.
In my data, I have always 4 totals before that text, so I thought perhaps that the way to do this would be to impose to the sumif function to stop summing after counting 4 totals. I didn't find a way to do that.
I thought a little more on the problem and I find out that the easy way would be to record a macro with the sum if function, where, in the range part, I would do a Find for "End Notification"; and select all the cells to the top of the sheet. The problem is that the macro dont record that part, only the row number.I think I need to turn the range a variable, where the variable is equal to the find selection.
View 9 Replies
View Related
Jun 3, 2009
I'm trying to create a sumif formula that finds the column the information is in that it needs to sum. I have attached a copy of the file I'm trying to create a formula to get results that I want.
Generally you would normally use the "=SUMIF(range,criteria,sumrange)". I was wondering if there was a formula I can substitute "sumrange" to also search a range of data (Eg: "G16:DA28"). I need the range to be dynamic as the column to be sum can change based on the criteria/option button being selected from the product category. I assume there is an indirect function involved, but I am not familiar with it. If you have a better and less complicated formula please suggest.
View 6 Replies
View Related
Sep 4, 2009
I’m using a SUMIF function to evaulate some date. The second argument in the function, the criteria, is that the numbers to be summed are greater than 25 but less than 50.
View 2 Replies
View Related
Dec 12, 2006
I want to add a twist to the sumIf-function, and need some help. My request is similar to lots of other sumIf-issues posted here, which were resolved with the sumproduct-function, but is a little bit different.
View 10 Replies
View Related
Jan 9, 2007
There is a function sumif() that is used for do sum() under condition
Nevertheless, if I want to do max() under condition, how can I do?
There isn't a function maxif().
View 9 Replies
View Related
Feb 27, 2012
How do I sumif on the amount in column A when the year in column B is 2010?
View 5 Replies
View Related
Jul 2, 2014
I was wondering if there was a way to use sumif and offset to guide the summing column in the example below. Perhaps I need to add an additional column, then formulate a solution. I want to sum the daily returns for the TSX when the slope is positive (green), and sum the S&P when it is negative. Currently, on signal day, I am summing that day's return, which I don't want to do. I want to sum starting on the next day (blue). The B column switches back and forth from positive to negative, so I will summing different data periods going back 1000 days. I am summing the TSX returns and S&P returns seperately to make it easier. Currently I have in C1=(sumif(b2:b1000,">0",c2:c1000)) Same for D2.
Date
Slope
TSX
S&P
sumif
sumif
06/30/14
0.002774
0.34%
0.19%
[code]....
View 3 Replies
View Related
Sep 18, 2007
I have a macro[A] that sums a column based on parameters passed to it from another macro[b]
Macro A
Sub SumColumns(varASheetName As Variant, varFormulaCell As Variant, varSumRange As Variant)
Sheets(varASheetName). Range(varFormulaCell).Value = Application.WorksheetFunction.Sum(varSumRange)
End Sub
' Macro B
Sub SumDebtorsStuff()
Call SumColumns("DebtorsRaw", "D10", Range("D21", Range("D65536").End(xlUp)))
End Sub ...........
View 9 Replies
View Related
Apr 13, 2007
In Mr Excel's Pod Cast on April 12th, he showed how to use the OFFSET function to define a range inside a SUM function. Then he had Conditional Formatting that would highlight the range that was being summed. Can anyone tell me what the formula would be inside the Conditional Formatting dialog box to get the OFFSET range to have a certain format?
View 9 Replies
View Related
Jan 8, 2014
Below is my function.
="Profit $"&SUM(IF(Sold!D15:D8998<>"",IF(MONTH(Sold!D15:D8998)=A4,Sold!H15:H8998)))
I would like to edit this function to also count profit only if Cell A15:A8998 in my Sold sheet has the words "Shipped". The text value Shipped is not a text value I entered, it is automatically written based on a Vlookup formula I created.
View 2 Replies
View Related
Nov 28, 2012
I have a drop list for selection of staff in an area, but can i then do another droplist and use the sumif function to sum up the total time depending on the value of the list.
i.e., if i selected name 1 it would search all of the sheet to see if name 1 was there and then add the times.
See attached : Utilisation.xls‎
View 2 Replies
View Related
