I know the formula =large but my problem is the formula for the equivalent value for it. Note: In my xcel file attached you can see there are multiple items with the same total numbers and also blanks
View 3 RepliesI have Excel 2013. I would like to use the code below but I need it to let me select the range instead of specifying it in the code, then pop up a form into which I can fill in what I want it to search and what I need it replaced with.
[Code] ......
example
1
2
3
1
2
6
4
3
6
7
In the Above range i want excel to show me
how many items are duplicate
If the duplicate item is shown i want the result to be shown in next cell
LIKE in the above example i want excel to show 1 is common , 6 is duplicated twice and therefore result should be shown in next cell
I have Excel 2003 with named cells, for example...
cell cell name data
A1 AAA 3
A2 BBB 1
A3 CCC 2
and so on...
When I autofilter (ascending) these cells, the data in these cells sort correctly, but the cell names stay where they're at.
cell cell name data
A1 AAA 1
A2 BBB 2
A3 CCC 3
I'm not an Excel expert so I'd like to know is there any way I could get the cell names to sort with their data.
cell cell name data
A1 BBB 1
A2 CCC 2
A3 AAA 3
I have x coordinates in column 1 with coresponding y coordinates in column 2. From my data of x,y coordinates I want to find points with similar y values. In my data I have defined groups of numbers, i.e. I have a set of numbers with y values around 30 (+-10), then a new group with y values around 60 (+-10), and so on... Sometimes the groups are not totaly separeted, there could be a few points with y values between 30 and 60. These points can be grouped with the closest group of coordinates (30 or 60). Each group of x,y coordinates could be copypasted in the columns to the right (columns 3 and up).
So what I want to do is find a group of coordinates. This group will have at least 40 individual points +-10 from a group mean. The coordinates need to be sorted out from the data and put in seperate columns.
I am trying to sort multiple values in ascending order (example attached) however I can't get this to work. Tried looking at a few different forums and although there is plenty of sorting questions out there they all tend to be relating to dates not different values (i.e text and numbers).
View 14 Replies View RelatedI need a macro to sort on five columns (Column A, L, P, X, and Y) out of about 33 columns. Sort is all lowest to highest.
The code I have so far is:
Sub Macro1()
Range("A2:AG").Select
Selection.Sort Key1:=Range("A2"), Order1:=xlAscending, Key2:=Range("L2") _
, Order2:=xlAscending, Key3:=Range("P2") _
, Order3:=xlAscending, Key4:=Range("X2") _
, Order4:=xlAscending, Key5:=Range("Y2") _
, Order5:=xlAscending
End Sub
However, I get an error "runtime error 1004 - method range of object global failed".
I have a piece of code which, amongst other things, searches column A of one sheet for certain values and then pastes relevant data to a different sheet.
A lot of the data is fixed in relation to the entry in column A e.g. the 'Open Date' is always 8 rows down and 1 row across from the value I search for. These pieces of data easy to transfer to the other sheet.
However, one piece of data could be anywhere within a 10 row, 4 column region offset from the value in column A i.e. if column A is on row 12, then the data I am looking for could be anywhere in the range B20:E30.
I now have everything set up to do exactly what I want except this last bit.
All I want is for the overview page to show the top three referrers for each month. At the moment, it's finding the top and bottom 'scorer' but if more than one has the same score I can only see the first alphabetically.
I'm looking for a formula that would tell me if a value in colume E can be found in column M while the values in column M may have characters before and after the value I'm looking for. The values are alpha and numberic in many cases.
Find E2 in M:M where E2 = 0123 and is in M:M as a15012388. The "yes/no" result is marked in red where I would like to have the answer.
Description
Looking For
Yes/No
[Code].....
I'm working with reports where I am given a list of used RFID tags which contain 13 alpha-numeric characters, and need to compare it against another list, in order to determine if any are matching. I'd like to be able to loop through one column of values to compare against the other, but unfortunately my VBA skills aren't that great..
View 5 Replies View RelatedI have a workbook with three sheets containing patient information from a clinic. Each sheet pertains to a different year. The sheets are formatted such that every row of each sheet contains a patient ID number in column A; in the same row, following the patient ID, is data pertaining to that patient, part of which stays the same (intake data)[=values in columns B:O] and part of which changes (encounter data)[=columns P:AA].
My challenge in cleaning and merging this dataset is that the ID numbers may not be trustworthy: I need a way to validate that there are no patient records [=rows] such that a given row has the same set of identifying information (OpenRecord Date, Sex, Age, History, etc.) located in columns B through O but a different ID number (column A) in a different sheet. In other words, I need to make sure the same patient isn't masquerading by a different ID number across different years [=worksheets]. What I am trying to do is develop a macro or formula that compares each row's range of values for B:O to every other row across each of the three worksheets; then find and list only matches for B:O that do not have the same value in Col A.
Complicating this operation are two considerations: 1) Each sheet in the workbook (excerpt attached) contains about 40,000 rows. 2) DOB is missing; instead, we have "Age." For those patients which appear in all three years captured in the three sheets, the "Age" value (column F) increases by +1 year.
A link to an example file on Google Drive : [URL] ....
I would like to be able to replace all cell values in a range of 20c by 20r (i.e. 400 cells). In all cases the condition would be the same (find all cells with a value greater than than zero), but then replace with different values.
e.g. Cells with value >0 in range CX119:DQ138 replace with "NT", then cells with value of >0 in range DR119:EK138 replace with "NU"
I thought you could do it with find and replace by just selecting that range of cells but can't see how to set the conditional >0 bit.
Of the form "packing list" page of the changes made to the necessary places "commertial Invoice" section is being transferred. So far, no problem. If you are loading only the truck. However, a truck, trailer or container are loading more than one, "packing list" Vehicle / Container Nos. are different. If you are loading more than one truck or container, "packing list" Vehicle / Container Nos. are different. This is not a problem for the packing list. But the "commertial Invoice" on the invoice values that must be unique.
For example, from "the product 2" 50 pieces laoded to the truck and trailer have loaded a 25 pieces, in the "commertial Invoice", from "product 2" needs to write 75 pieces.
My question to you is this:
In the "Packing List" find duplicate products, to "commertial Invoice" Can we write to collect the amount of write one?
Second question:
In the form comboboxes' chage events are the same. Can we make change events one code?
I'm trying to create a spreadsheet to update daily, whenever our market intelligence arrives by email. I'm not trying to write a macro which can select a range of cells (G:L) relative to the date in Column B, which represents the value in cell P6. In other words:Read the value of cell P6 Find that value in column B (e.g. B646)highlight the cells in columns G through to L on that row (e.g. select G646:L646) I am then aiming to paste the values in that range of cells, so that those stay in the spreadsheet and are not lost when the next lot of figures comes in the following day.
Range("G646:L646").Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
ActiveWindow.SmallScroll Down:=12
Application.CutCopyMode = False
ActiveWorkbook.Save
but that's obviously a static range, rather than looking up the date first.
I have a table refreshed from a MySQL database that I use to create a report. I can use this data quite well using formulas in the cells.But in order for me to add more information to the report I use without making it cluttered I need to add some data as comments.
I have created a loop that picks up some cell values that I want to use as criteria but I cant work out how to use these variables to search through the table and get the info I require to put in the comment. In a cell I would use offset/match or index/match to get the required cell value but how do I do this in VBA?
Using Microsoft Excel 2007, VBA
I am trying to display an error message if a range is missing '0' or '100', or is empty.
I figured out how to display error when the selected range is empty, but I cannot figure out how to find if a particular value exists within a range and return an error if there isn't.
I have four named ranges (Segment, Keyword, Impressions and Dropdown) and I would like to create a formula-based ranking of keywords by impressions and clicks. Using the following array formula, I am able to return the correct values for impressions or clicks:
{=LARGE(IF(Segment=DropDown,Impressions),$H7)} where $H7 is the number ranking 1, 2, 3 etc.
My question is what array formula could be used to find which row in the array returned that number and then pulls the data from the same row in the other named ranges?
Essentially find row of {=LARGE(IF(Segment=DropDown,Impressions),$H7)} but return Keyword and Clicks on that row.
Other Notes: I cannot use pivot tables and some values might be the same which would make Vlookups not accurate for duplicate values.
Link to an example document to clarify this. [URL] .......
In my workbook I have two tabs, the first tab is intended to call on data located on the second tab so I can evaluate & Display it in different ways. Here's what's worked so far. Where I'm stuck is attempts to try and combine the two.
- the second tab is named AW_Items_Import
Examples:
1) Looking on the second tab to count the number of times a object (identified on the first tab in Cell B13) appears
=COUNTIF(AW_Items_Import!J:J,B13)
2) Looking on the second tab for items that fall within a set value range, the ranges specified on the first tab in cells C14 and E14
=COUNTIF(AW_Items_Import!G:G,">=" & C14) - COUNTIF(AW_Items_Import!G:G,">" & E14)
What I want to do, is combine 1) and 2) so I can isolate a search to a name specified on the first tab, THEN count the number of times that item falls within a set range, the range also specified on the first tab.
I have a wookbook with serial numbers in column A and barcodes in column B. There are 51940 rows in total.
Is there a way I can search through column A, and for each unique value found , concatenate all of the barcodes that relate to that serial number in column C?
Serial Numbers | Barcodes | Combined Values
-------------------------------------------------------
abc123 abc12300 abc12300,abc12301, etc etc
abc123 abc12301
def456 def45600 def45600, def45601, etc etc
ghi789 def45600
i am using Excel 2010.
I've attached a workbook which contains two sheets:
PAYM
DEVICE_PAYM
Data is updated on DEVICE_PAYM each day with the figures I need located in column "AN". I need to be able to copy the data from "AN" and paste it into a column on the PAYM sheet. The destination column on the PAYM sheet needs to be specified by inputting a specific date - ideally, I would like to use the calendar Add-In as part of this process. I've already input some code for the calendar but am unable to develop this further so that it finds the correct date column and pastes the data across from the other sheet.
I want to use the find function on a range and search for a "," character. If I get a "," I want to return a True otherwise false.
I tried just recording a macro using the find function but no code shows up.
how to use the find feature in a macro, can this be done?
excel 2010
I am trying to find a way to see if a range of cells contain (not exactly, just contains) the text in another cell.
For example:
A1 Fred Flintsonte 2012 B1 Barney Rubble C1 Barney Rubble
A2 Barney Rubble 2012
If a cell in range A1:A2 contains text in B1 (CASE INSENSITIVE), then C1 equals B1
I've tried entering this formula in C1, but it does not work:
=IF(ISNUMBER(SEARCH(B1,A1:A2)), B1, "")
how to find the source data range of a pivot table (that already exists) in Excel 2007?
View 1 Replies View RelatedI would like to export data coming from a range values which I set up. Just like the code below that will print out all the data using range values. I would like also to do the same in exporting the data in one pdf file with multiple pages based on each of the data of the range.
VB:
Sub Batch_Print()
Dim FileName As String
' On Error GoTo Print_all_Error
[Code].....
First I have a excel with a selection of customers:
Column A = customer id
Column B = customer name
...
this excel contains about 500 premium customers
Secondly, on an external server I have a database with the details (adress, phonenumber, ...) of about 100.000 customers
Now I would like to display the details from the database into the existing excel. For that I was about to write a sql-query to copy the data I need to have into the excel (sheet2) to access it from sheet 1 with vlookup (based on the customer id).
But the large amount of data makes excel to work very slowly and it is impossible to keep on working like that. So now I was looking for a way to create a selective sql-statement.
Something like this:
select details from db
where customerid in (all the customer id's mentioned in sheet 1)
without writing all customer id's manually
I have 4 different excel files in C:Reports (SupplierA.xls, SupplierB.xls, SupplierC.xls and SupplierD.xls) all with a page called "Summary" (like below) in a set range A2:F5.
Fruit
Monday
Tuesday
Wednesday
Thursday
Friday
Apples
2 4 1 7 8 Oranges
2 3 4 6 9 Lemons
4 5 6 6 6 Pears
1 2 3 5 5
I also have a summary excel file in C:Totals called "Supplier Totals" that has a summary page that I want to total up all my suppliers A, B, C and D (same as above A2:F2). How can do this in VBA?
I am using Excel 2007.
So I have values in Column L3 to AH3 and I would like to use if condition to see which values are less than 10.
I also have other rows where this comparison needs to be done but for now I can't even get simple if condition to work.
this is what I am doing
For Each cell In Range("L3:AH3")
If cell.Value < 10 Then
ActiveCell.Font.Color = vbRed
End If
Next cell
I am not getting any error but for some reason only first cell condition is compared and not the other cells..
I have a excel spread sheet with 2 pages and on the first is where i want the data to populated, sheet1 has 2 columns. The first is blank and the second list a username the first is where i want the data i need entered
on the second sheet is a imported txt file broken down into columns and i am only concerned with the first 2
here is how i want it to work
sheet 1
column 1 column 2
??? username
??? username1
Sheet 2
column 1 column 2
testing username
testing username1
under username2
I want the code to look into sheet 2 in column 2 to find the username but if column 1 does not have the word testing then i do not want it to show
and if the word testing is there I will then want the code to display a "Yes"
In column 1 on sheet 1
Am working in Excel 07, but this would need to work in 2000 as well.
Need a macro that will...
1. Select a range of cells from B4 to RX. X is defined as the last row where Column A has a value.
2. Copy the visible cells
3. Open an email in Outlook (not via the email workbook function of excel), enter "Submission" into the title, enter "Dear X," insert 2 returns.
4. Paste the copied table (not the workbook, just what is on the clipboard) into the body the email.