I was looking over web for a vba code that will open yesterdays last modified (saved) file in a specific folder.
In these folder is for eac day one file, so it has to open yesterday, not today - yesterday last saved (modified).
I am trying to open a website, then for excel to download the csv file, then for it to save it in a specific folder under a specific name and file format (excel).
I am successful at opening the website with the following code, but how to do the rest.
Sub Searchez()
Dim IE As Object
Set IE = CreateObject("InternetExplorer.Application")
IE.Navigate "http://quote.morningstar.ca/Quicktakes/stock/keyratios.aspx?t=clwr®ion=USA&culture=en-CA&ops=clear" 'load web page google.com
IE.Visible = True
While IE.Busy
DoEvents
Wend
'IE.Navigate2 "javascript:SRT_keystuts.exportcsv()"
'this is the name of the download link as from when i hover my pointer over download link.
End Sub
I am trying to write a macro to find a file in a specific folder. The file name changes weekly. (Ex. C:My Folder31207.xls). I need to find the most recently modified version of the file and open it.
View 4 Replies View RelatedI have to open each pdf file in a specific folder, select and copy all contents and paste it in column 'A' of a new workbook.
I have tried following code but not worked...
Code:
Sub ConvertPDF(control As IRibbonControl)
Dim AdobeApp As String
Dim AdobeFile As String
Dim StartAdobe
Dim fso As New FileSystemObject
[Code]...
I have Acrobat Reader installed. Any method without using 'SendKeys'?
I have a requirement to search workbooks in a particular folder with specific string in file name. For example, let us assume I need to find a file which contains the name 'RR' in it. The position of 'RR' will vary with files i.e. 'RR' might be present either in the beginning, middle or at the end of file name. All I wanted is to search for file with 'RR' and do some activity and close the file and then goto next file. Similarly, the next search has to be performed with the files containing the name 'BB' in it.
View 1 Replies View RelatedI do routine tasks every day which involves opening 3 different files and pasting data into my main file. The data is always in the same format, and the 3 files are saved in the same location (3 different folders through). The 3 files are saved each day and the naming convention is constant, with only the date changing. For example, the files are always saved in C:My Documents and the files are called test_05.02.2013.xls. Tomorrow the file will be called test_06.02.2013.xls and so on.
So each day I will be rolling a file forward and I want to bring in the info from each of these files based on the new day.
How to do 1, and I will do the others (because the concept will be the same).
I'm looking for a code which is checking the file name first before opening and operating on it. File name format is filenameyyyymmdd.xls but the problem is files in that directory are saved irregularly (couple times a week) and I need to open the newest saved file.
View 2 Replies View RelatedI am trying to insert a link that once clicked will open a file (word, excel, powerpoint, etc. ) that has been saved on my computer.
View 3 Replies View RelatedI have an Excel application (Excel 2003) which is stored in the default Program Files folder by the Installer; for example: c:program fileszxchello.xls. The problem I am running into is this file opens as Read Only in Vista and this is interfering with the running of the application. There is no problem opening the file normally in Windows XP.
I have been able to narrow down the cause of this to the User Account Control system in Vista - if I turn OFF User Account Control, the Excel file opens normally and my application functions normally. Is there another option to open the Excel file without turning OFF User Account Control because some users may find it unacceptable to turn OFF this security feature. Ofcourse, one option is to install the application in another location, outside the Program Folder, and the file would open normally, but the Packaging Wizard that I am using to package the application does not allow me to install the application in any other location and thus, the application installs in the Program Folder and I am running into this problem of the Exel file opening as Read Only. Is there a way out of this situation where I can open the file normally (not as Read Only)?
I'm using this code below sucessfully to open a specific folder view window. What i'm looking for is a way to amend it slightly so that when the window opens the 'folder tree' on the left hand side does not show, as it always does at the moment.
View 2 Replies View RelatedThe following code works fine
Application.Dialogs(xlDialogFindFile).Show
I would like to know if I can set it so when the dialogbox appears it starts at a folder located on my C drive
The default setting opens the dialog in MyDocuments
I need to open all the excel file in a sub folder
(example : CCostingAccount*.*.xls)
It mean by run a macro, it will allow me to be open all excel file in the Account folder .
I am using the code below to Open the most recent file in a folder.But once it Identifies the most recent file I get a run time error"1004"
xxxxxxxxxxxxx(name of File) could't be found.At line "Wookbooks.Open strFilename".My question is , why can't it open it, it has the location and the file name?
This code works as long as the macro and target file are in the same directory(Folder)
I am using excel 2007 and I’m trying to open a file folder from a worksheet using a control button. They are both in same file folder. I’ve have tried
Workbooks.Open Filename:=ThisWorkbook.Path & "Report"
I also tried to record a macro but would not record going to file folder.
I am using below code to open file from 2 diff. folder and trying to do vlookup.
Its working in single loop but not moving to next file
Error: Invalid procedure or call argument.
Sub vFunction()
Dim strTempName As String
Dim strPath As String
Dim wb As Workbook
Dim wb1 As Workbook
Dim strFile As String
Dim strFile1 As String
[Code] ...........
I have a folder called 'Refresh'. Every week a new file is dropped into that folder. Instead of me placing that new file into my workbook, i would like my macro to just grab it. Is there a way for VB to grab the most recently created file that comes into my 'Refresh' Folder.
View 9 Replies View RelatedAnyone up for getting me started on code to open a file in a "dynamic" directory, specifically:
Where
Main directory is G:REPORTS
The file name is "Pivot_xx-xx-xx.xls"
The directory where the file is located is G:REPORTSxx-xx-xx
xx-xx-xx is yesterday's date
I would like to run a macro that is going to open a file (Test.xls) Simple so far....
However, this file is 1. stored every month in a different folder (eg: 200709,200710, etc..) and the file is named according to the month (eg: Test09.xls, Test10.xls, etc...)
In my excel book, I did created two cells which I already use to save a document according to those cells. One cell with Acct Period (200710) and another one with the month (10).
I have tried the following formula with no success:
OpenWorkbook "\pathpathpath" & Range("Accout Period") & "Test" & Range("Month") & ".xls"
I am trying to open a folder so I may choose the workbook to open. I am able to open a workbook but I want to open the folder which contains the workbook.
View 6 Replies View RelatedI just need a macro to open any excel file may be 2003, or 2007 from a folder.
I did tried Dir but not working. I want the macro in 2007.
I want to open a specific sheet and refresh only said sheet when i open another sheet for example x.xls
So opening x.xls will automatically open y.xls
I've tried this in the workbook code area but it doesn't do anything.
[Code] .....
I have a folder called "Report" at C: and inside this folder there are 12 folder named from 1 to 12 ("1","2",...,"12")
I need a macro to save my workbook as a file in C:Report(one of these folders depending on the month of a certain cell)
i.e. if the date in this cell is 8/12/2012 .. then save my file in C:Report12*.xlsm
This is the code i use
Code:
Private Sub CommandButton1_Click()
Dim fname As String
fname = Format$(Range("S8"), "dd-mm-yyyy")
On Error Resume Next
ActiveWorkbook.SaveAs Filename:="C:Reort" & fname & ".xlsm"
End Sub
So what i need now is what to insert after C:Report
I have a macro which saves file to a specific folder. Problem is I can save the file only in my local drive C: but not on a server for some reason.
Here is the
At home in my home computer this code worked when C: was selected.
ChDir ("c:")
Title = Application.GetSaveAsFilename(Name, "Excel files (*.xls), *.xls")
ActiveWorkbook.SaveAs Name
Save the file in specific place
But when I substituted C: path with my server path it doesnt work! Have a look. Its the exact same code except my path is different.
ChDir ("\Lnf001Lnf1vol1SharedOP_ENGWork Order")
Title = Application.GetSaveAsFilename(Name, "Excel files (*.xls), *.xls")
ActiveWorkbook.SaveAs Name
I have an Excel workbook with 2 worksheets in it. One of the worksheets imports a txt file and then the other worksheet displays data that formulas I have written have collected.
I usually import the txt file by running through the many steps with the "import data" option. This is good but I want it to be faster.
I used the macro recorder and ended up with the following code
With ActiveSheet.QueryTables.Add(Connection:= _
"TEXT;\DesktopImport FolderTest.txt" _
, Destination:= Range("A1"))
.Name = "Test"
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = False
I have an Excel Worksheet (let's call it "AA.xlsm") which uses VBA code to loop through column A, update column B with some results/values, and then (for each value in column A) SaveAs the worksheet into a different filename/path as a ".csv" type file.
My line of code for the SaveAs is as follows: Workbooks("AA.xlsm").SaveAs LEpath & CurrFldr, FileFormat:=xlCSV
My problem is that my original worksheet, AA.xlsm, gets closed whereas I need it to stay open/active after each SaveAs iteration.
There is a problem in joining one cell to the other file
The below is screen shot when l click the on every cell the image must be open
How can do it?
Capture.PNG
I recorded a macro to save a workbook to a specific folder using the current file name. However, I've tried to remove the absolute reference to a specific filename but it is not working for me. Am I close?
ActiveWorkbook.SaveAs Filename:= _
"H:Files and DocumentsPROJECTSSR 2 SS Phase Two Component ReliabilityWinTrac Files xt_conversionsexcel_version" & SheetName _
, FileFormat:=xlOpenXMLWorkbook, CreateBackup:=False
Its been a while since I did this on 2003 and needing a pointer on 2007.
Just needing a simple macro that opens the relevant folder from a hardcoded path to allow the user to manually select the file to be used.
This file will then be used to copy from and paste to another file.
I have a variable list. Each column will be 250 digits and numbers of rows will be variable. I want a macro to import a text file from a specific folder into a sheet without split it to columns. So we will work only in column A
Then macro will find B1002 wording in A1. if it is exist, it will copy the next 36 digits after B1002 wording if not then it will search A2 row. The next step will be to search and find another wording "B1001" if it finds it will replace copied 36 digits text. If it can not find B1001 wording it will go to upper row and search B1001 wording here and paste the text. This will go on till row shows #END. This means it reached the end of the list. And then macro will save this file as text file to another folder.
So macro will go to beginning to open other file in the folder and this will go on till last file in the folder.
This is the logic of the macro. Here is the sample of what I want.
Original Data: ....
I am naming raw data files by the date of the data in the file. In another file I am using sumif and sumifs formulas to consolidate the data and organizing it by date, later to copy and paste special to keep the cleaned orgaized data in one spreadsheet. I would like to be able to reference a date and have excel open the appropriate file (named by the date) and then execute the sumif and sumifs formulas. If this is possible I can have the spreadsheet pull in all sorts of historical data all at once and I won't have to worry about copy paste special.
View 1 Replies View Related