Open File With Name And Folder Based On Cell
Nov 20, 2007
I would like to run a macro that is going to open a file (Test.xls) Simple so far....
However, this file is 1. stored every month in a different folder (eg: 200709,200710, etc..) and the file is named according to the month (eg: Test09.xls, Test10.xls, etc...)
In my excel book, I did created two cells which I already use to save a document according to those cells. One cell with Acct Period (200710) and another one with the month (10).
I have tried the following formula with no success:
OpenWorkbook "\pathpathpath" & Range("Accout Period") & "Test" & Range("Month") & ".xls"
View 9 Replies
ADVERTISEMENT
Sep 30, 2008
I would like to know how to open multiple excel files from a folder based on the information based in cells down a certain column until the last cell.
I thought it might be something like this but it isn't: ....
View 6 Replies
View Related
Jul 6, 2012
I am trying to open a website, then for excel to download the csv file, then for it to save it in a specific folder under a specific name and file format (excel).
I am successful at opening the website with the following code, but how to do the rest.
Sub Searchez()
Dim IE As Object
Set IE = CreateObject("InternetExplorer.Application")
IE.Navigate "http://quote.morningstar.ca/Quicktakes/stock/keyratios.aspx?t=clwr®ion=USA&culture=en-CA&ops=clear" 'load web page google.com
IE.Visible = True
While IE.Busy
DoEvents
Wend
'IE.Navigate2 "javascript:SRT_keystuts.exportcsv()"
'this is the name of the download link as from when i hover my pointer over download link.
End Sub
View 1 Replies
View Related
Jul 28, 2006
I need to open all the excel file in a sub folder
(example : CCostingAccount*.*.xls)
It mean by run a macro, it will allow me to be open all excel file in the Account folder .
View 4 Replies
View Related
Nov 24, 2009
I am using the code below to Open the most recent file in a folder.But once it Identifies the most recent file I get a run time error"1004"
xxxxxxxxxxxxx(name of File) could't be found.At line "Wookbooks.Open strFilename".My question is , why can't it open it, it has the location and the file name?
This code works as long as the macro and target file are in the same directory(Folder)
View 6 Replies
View Related
Jun 7, 2009
I am using excel 2007 and I’m trying to open a file folder from a worksheet using a control button. They are both in same file folder. I’ve have tried
Workbooks.Open Filename:=ThisWorkbook.Path & "Report"
I also tried to record a macro but would not record going to file folder.
View 9 Replies
View Related
Nov 25, 2009
I currently use the following code to create a duplicate file based on two cells within a directory and folder i specify. These cells consist of the team and week commencing date (mondays date of week which is cell 'Main Menu'!K8)
View 7 Replies
View Related
Aug 29, 2012
I am using below code to open file from 2 diff. folder and trying to do vlookup.
Its working in single loop but not moving to next file
Error: Invalid procedure or call argument.
Sub vFunction()
Dim strTempName As String
Dim strPath As String
Dim wb As Workbook
Dim wb1 As Workbook
Dim strFile As String
Dim strFile1 As String
[Code] ...........
View 2 Replies
View Related
Sep 13, 2006
I have a folder called 'Refresh'. Every week a new file is dropped into that folder. Instead of me placing that new file into my workbook, i would like my macro to just grab it. Is there a way for VB to grab the most recently created file that comes into my 'Refresh' Folder.
View 9 Replies
View Related
May 16, 2008
Anyone up for getting me started on code to open a file in a "dynamic" directory, specifically:
Where
Main directory is G:REPORTS
The file name is "Pivot_xx-xx-xx.xls"
The directory where the file is located is G:REPORTSxx-xx-xx
xx-xx-xx is yesterday's date
View 9 Replies
View Related
Mar 13, 2007
I am trying to write a macro to find a file in a specific folder. The file name changes weekly. (Ex. C:My Folder31207.xls). I need to find the most recently modified version of the file and open it.
View 4 Replies
View Related
Apr 18, 2008
I am trying to open a folder so I may choose the workbook to open. I am able to open a workbook but I want to open the folder which contains the workbook.
View 6 Replies
View Related
Jul 21, 2014
I was looking over web for a vba code that will open yesterdays last modified (saved) file in a specific folder.
In these folder is for eac day one file, so it has to open yesterday, not today - yesterday last saved (modified).
View 1 Replies
View Related
Oct 19, 2012
I just need a macro to open any excel file may be 2003, or 2007 from a folder.
I did tried Dir but not working. I want the macro in 2007.
View 4 Replies
View Related
Nov 21, 2012
I have to open each pdf file in a specific folder, select and copy all contents and paste it in column 'A' of a new workbook.
I have tried following code but not worked...
Code:
Sub ConvertPDF(control As IRibbonControl)
Dim AdobeApp As String
Dim AdobeFile As String
Dim StartAdobe
Dim fso As New FileSystemObject
[Code]...
I have Acrobat Reader installed. Any method without using 'SendKeys'?
View 1 Replies
View Related
Aug 27, 2007
I am using the following code to open an existing file whose name is in cell A1. I want to modify the code so that if the spreadsheet does not exist, a template (Costing.xlt), in the same director, is opened and then saved with the name in cell A1.
Workbooks.Open Filename:="C:Spreadsheets" & Range("A1") & ".xls"
View 3 Replies
View Related
Aug 29, 2012
I have a requirement to search workbooks in a particular folder with specific string in file name. For example, let us assume I need to find a file which contains the name 'RR' in it. The position of 'RR' will vary with files i.e. 'RR' might be present either in the beginning, middle or at the end of file name. All I wanted is to search for file with 'RR' and do some activity and close the file and then goto next file. Similarly, the next search has to be performed with the files containing the name 'BB' in it.
View 1 Replies
View Related
Aug 11, 2008
is there a way using VBA code that you can have a file path entered into cell 'A1'
and then when you run the macro, the file referenced in the file path in cell 'A1' will open,
View 14 Replies
View Related
Oct 6, 2011
I want to create a Macro to open a file based on the data of a particular cell to update the data for macro file from that file.
For example I have 3files named Dept1, Dept2, Dept3 and I have one more file named Cost Sheet which contained macro and based on the cell D2 of my macro file I need to open the particular file i.e Dept1, Dept2 or Dept3 and the updated procedure and cell ranges are same for all file
View 2 Replies
View Related
May 14, 2014
I have alot of project folders on my harddrive.
All in format: I:/12345-costumer-projectname/
The five digits are unique for each project.
I make calculations for these projects using an excel file. In this excel I also type the projectnumber (cell J2)
Now i would like to make a button. When pressed, it checks the projectnumber cell J2, looksup the corresponding folder and saves the excelfile in PDF format in this folder.
I have found macro to find files in folders, but none which do the above.
View 4 Replies
View Related
Apr 15, 2014
I have an Excel Worksheet (let's call it "AA.xlsm") which uses VBA code to loop through column A, update column B with some results/values, and then (for each value in column A) SaveAs the worksheet into a different filename/path as a ".csv" type file.
My line of code for the SaveAs is as follows: Workbooks("AA.xlsm").SaveAs LEpath & CurrFldr, FileFormat:=xlCSV
My problem is that my original worksheet, AA.xlsm, gets closed whereas I need it to stay open/active after each SaveAs iteration.
View 3 Replies
View Related
Sep 9, 2013
Its been a while since I did this on 2003 and needing a pointer on 2007.
Just needing a simple macro that opens the relevant folder from a hardcoded path to allow the user to manually select the file to be used.
This file will then be used to copy from and paste to another file.
View 8 Replies
View Related
Sep 10, 2008
All I have a macro that goes to a "Main" folder modifies the excel sheet and then saves. Is there a way to move that "Modified" sheet to the correct folder after?
All of the excel sheets are named like this:
Bldg _ Date
1130_2008-January
1200_2008-March
1300_2008-January
I need the Bldg # to be a folder.
So all of the Excel files are in this folder: C:Documents and Settingsu369875DesktopProject stuffTestin Save_AS
And then at the end of that I need the bldg Number from the front of the excel name. So for the first one : C:Documents and Settingsu369875DesktopProject stuffTestin Save_AS1130
Or I could even put that building # in the excel at lets say (A1) and grab from there if that would work..
Here is the macro I have as of now. It loops through all of the excels in the folder.
Main Macro (calls out Macro2 & Macro3)
View 14 Replies
View Related
Dec 7, 2013
I have some daily text files in a folder (so about 30 of them each month), which in the end of month, I need to open them up in excel, format them so that I can use the information for my analysis.
I would like to create a macro, to quickly open them all up at once and save them each individually in .xls or .xlsm format.
I am new to VBA and after some research online, I was able to have the files open with the following code. but now I don't know how to proceed further to save them one by one with the same name but in .xls or .xlsm format.
Sub Opentxtfiles()
Dim MyFolder As String
Dim myfile As String
[Code].....
View 2 Replies
View Related
Nov 6, 2011
I use Excel 2003 at work. I'm looking for some code that will Open a folder and then lets the user to select a file then continues to run the macro.
The file name they select will look similar to this K2271011.504 or K3011111.201
View 3 Replies
View Related
Apr 24, 2014
I need to open an excel file based on a date mentioned in the file name, but minus 1 day. The file name is composed with Statistics_date_time.xls
Example: statistics_20140423_142754.xls
Once I need to open the file (only in the mornings), it has to be the one from the previous day to see the yesterdays performance. How can I create a macro that will look at the date in the file and take the one from yesterday?
This will be a part of a macro I'm making. The rest of the macro will just format the file and combine a few ones from different departments.
View 4 Replies
View Related
Nov 22, 2011
I want this filecopy to:
1. create a new folder in a subfolder called "/certificates".
2. name that folder the current date. ie. "/certificates/23.11.11".
3. copy the file into that folder.
4. If it's a duplicate then rename the file " - 2" or what ever the next number is.
Code:
Private Sub CommandButton2_Click()
Application.ScreenUpdating = False
Application.DisplayAlerts = False
[Code].....
View 3 Replies
View Related
Jan 16, 2013
I need a code to open a file automatically based on file name, for example if the active file name is "trial", then it need to open another file named "trial1" based on which the macro will run, because I have two set of files and I want to compere daily with two users. for example the file names in Set a- iron, cement, stone, sand where as the set b-iron1, cement1, stone1, sand1
View 1 Replies
View Related
Mar 15, 2013
I need a macro in a workbook to look at all the files in the same folder that have "*att*.xls" in the name and determine and copy from the range A15:W515 only the rows that have data in at least columns A, C and D. Each file will vary as to how many rows there will be and there are more than the files with "*att*.xls" in the folder. The data will be on the only worksheet in each file and the worksheet is named "G2WAttendee_xls" the data from all the files need to be copied to the file called "Consolidated webinar reports.xls" (I am using Excel 2003) and to a sheet called "Attendance Data" and added to the end of the last paste.
At the start of the macro the current file "Consolidated webinar report.xls" should be saved to a sub folder of the current directory and have the date saved added to the name. The sub folder is called "Completed reports". The data in the original file on worksheet "Attendance Data" should be deleted.
At the end of the process all the files that have had data copied from them should be moved to the sub folder "Attendance reports consolidated" (This could be done as each file is closed if that is easier).
I have headings in row 1 of the "Attendance Data" worksheet that match the headings in the various files in the folder (which will always be in row 14 of the individual "*att*.xls" files).
The folder with all the files and the "Consolidated webinar report.xls" file is at path "Z:P and S MEvaluationsWebinar series 2012-13TB".
View 9 Replies
View Related
Mar 26, 2014
I have code that references a cell with a file path in it. If the filepath is not present I would like the folder and file to be created.
Sub Create_Path()
Dim strfolder As String
Dim filename As String
strfolder = Range("n17")
filename = Range("n16")
If Len(Dir(strfolder, vbDirectory)) = 0 Then
MkDir strfolder
End Sub
I have used this code but am getting an error at the "Mkdir strfolder" section. What do I need to change to create the file if no folder is found.
Cell N17 has the filepath
Cell N16 has what I would like to name the file as
View 4 Replies
View Related
