I am using the code below to Open the most recent file in a folder.But once it Identifies the most recent file I get a run time error"1004"
xxxxxxxxxxxxx(name of File) could't be found.At line "Wookbooks.Open strFilename".My question is , why can't it open it, it has the location and the file name?
This code works as long as the macro and target file are in the same directory(Folder)
I am using Excel 2007 so I CANNOT use application.filesearch.
With that said, I need to change one of my old macros that searched for the newest file within a specified folder, and then display the name of that file in a message box that gives the person an option of opening the file. I've read too many workarounds for application.filesearch and I'm not sure how to combine them all into something I can use.
Normally I have a bit of code to start with, but this one has me so baffled I don't know where to start.
I am trying to open a website, then for excel to download the csv file, then for it to save it in a specific folder under a specific name and file format (excel).
I am successful at opening the website with the following code, but how to do the rest.
Sub Searchez()
Dim IE As Object
Set IE = CreateObject("InternetExplorer.Application")
IE.Navigate "http://quote.morningstar.ca/Quicktakes/stock/keyratios.aspx?t=clwr®ion=USA&culture=en-CA&ops=clear" 'load web page google.com
IE.Visible = True
While IE.Busy
DoEvents
Wend
'IE.Navigate2 "javascript:SRT_keystuts.exportcsv()"
'this is the name of the download link as from when i hover my pointer over download link.
End Sub
I need to open all the excel file in a sub folder
(example : CCostingAccount*.*.xls)
It mean by run a macro, it will allow me to be open all excel file in the Account folder .
I am using excel 2007 and I’m trying to open a file folder from a worksheet using a control button. They are both in same file folder. I’ve have tried
Workbooks.Open Filename:=ThisWorkbook.Path & "Report"
I also tried to record a macro but would not record going to file folder.
I am using below code to open file from 2 diff. folder and trying to do vlookup.
Its working in single loop but not moving to next file
Error: Invalid procedure or call argument.
Sub vFunction()
Dim strTempName As String
Dim strPath As String
Dim wb As Workbook
Dim wb1 As Workbook
Dim strFile As String
Dim strFile1 As String
[Code] ...........
I have a folder called 'Refresh'. Every week a new file is dropped into that folder. Instead of me placing that new file into my workbook, i would like my macro to just grab it. Is there a way for VB to grab the most recently created file that comes into my 'Refresh' Folder.
View 9 Replies View RelatedAnyone up for getting me started on code to open a file in a "dynamic" directory, specifically:
Where
Main directory is G:REPORTS
The file name is "Pivot_xx-xx-xx.xls"
The directory where the file is located is G:REPORTSxx-xx-xx
xx-xx-xx is yesterday's date
I am trying to write a macro to find a file in a specific folder. The file name changes weekly. (Ex. C:My Folder31207.xls). I need to find the most recently modified version of the file and open it.
View 4 Replies View RelatedI would like to run a macro that is going to open a file (Test.xls) Simple so far....
However, this file is 1. stored every month in a different folder (eg: 200709,200710, etc..) and the file is named according to the month (eg: Test09.xls, Test10.xls, etc...)
In my excel book, I did created two cells which I already use to save a document according to those cells. One cell with Acct Period (200710) and another one with the month (10).
I have tried the following formula with no success:
OpenWorkbook "\pathpathpath" & Range("Accout Period") & "Test" & Range("Month") & ".xls"
I am trying to open a folder so I may choose the workbook to open. I am able to open a workbook but I want to open the folder which contains the workbook.
View 6 Replies View RelatedI was looking over web for a vba code that will open yesterdays last modified (saved) file in a specific folder.
In these folder is for eac day one file, so it has to open yesterday, not today - yesterday last saved (modified).
I just need a macro to open any excel file may be 2003, or 2007 from a folder.
I did tried Dir but not working. I want the macro in 2007.
I have to open each pdf file in a specific folder, select and copy all contents and paste it in column 'A' of a new workbook.
I have tried following code but not worked...
Code:
Sub ConvertPDF(control As IRibbonControl)
Dim AdobeApp As String
Dim AdobeFile As String
Dim StartAdobe
Dim fso As New FileSystemObject
[Code]...
I have Acrobat Reader installed. Any method without using 'SendKeys'?
I have a requirement to search workbooks in a particular folder with specific string in file name. For example, let us assume I need to find a file which contains the name 'RR' in it. The position of 'RR' will vary with files i.e. 'RR' might be present either in the beginning, middle or at the end of file name. All I wanted is to search for file with 'RR' and do some activity and close the file and then goto next file. Similarly, the next search has to be performed with the files containing the name 'BB' in it.
View 1 Replies View RelatedI have an Excel Worksheet (let's call it "AA.xlsm") which uses VBA code to loop through column A, update column B with some results/values, and then (for each value in column A) SaveAs the worksheet into a different filename/path as a ".csv" type file.
My line of code for the SaveAs is as follows: Workbooks("AA.xlsm").SaveAs LEpath & CurrFldr, FileFormat:=xlCSV
My problem is that my original worksheet, AA.xlsm, gets closed whereas I need it to stay open/active after each SaveAs iteration.
Its been a while since I did this on 2003 and needing a pointer on 2007.
Just needing a simple macro that opens the relevant folder from a hardcoded path to allow the user to manually select the file to be used.
This file will then be used to copy from and paste to another file.
I have some daily text files in a folder (so about 30 of them each month), which in the end of month, I need to open them up in excel, format them so that I can use the information for my analysis.
I would like to create a macro, to quickly open them all up at once and save them each individually in .xls or .xlsm format.
I am new to VBA and after some research online, I was able to have the files open with the following code. but now I don't know how to proceed further to save them one by one with the same name but in .xls or .xlsm format.
Sub Opentxtfiles()
Dim MyFolder As String
Dim myfile As String
[Code].....
When I click on the "Office Button", then in the recent "documents dialog box" there is a list of my worksheets plus an "allsenatename" file". This then downloads a worksheet from a website. I don't know how it was added to my list, I must have entered it when looking at that web site in error.
View 3 Replies View RelatedI use Excel 2003 at work. I'm looking for some code that will Open a folder and then lets the user to select a file then continues to run the macro.
The file name they select will look similar to this K2271011.504 or K3011111.201
I have alot of project folders on my harddrive.
All in format: I:/12345-costumer-projectname/
The five digits are unique for each project.
I make calculations for these projects using an excel file. In this excel I also type the projectnumber (cell J2)
Now i would like to make a button. When pressed, it checks the projectnumber cell J2, looksup the corresponding folder and saves the excelfile in PDF format in this folder.
I have found macro to find files in folders, but none which do the above.
I need a macro in a workbook to look at all the files in the same folder that have "*att*.xls" in the name and determine and copy from the range A15:W515 only the rows that have data in at least columns A, C and D. Each file will vary as to how many rows there will be and there are more than the files with "*att*.xls" in the folder. The data will be on the only worksheet in each file and the worksheet is named "G2WAttendee_xls" the data from all the files need to be copied to the file called "Consolidated webinar reports.xls" (I am using Excel 2003) and to a sheet called "Attendance Data" and added to the end of the last paste.
At the start of the macro the current file "Consolidated webinar report.xls" should be saved to a sub folder of the current directory and have the date saved added to the name. The sub folder is called "Completed reports". The data in the original file on worksheet "Attendance Data" should be deleted.
At the end of the process all the files that have had data copied from them should be moved to the sub folder "Attendance reports consolidated" (This could be done as each file is closed if that is easier).
I have headings in row 1 of the "Attendance Data" worksheet that match the headings in the various files in the folder (which will always be in row 14 of the individual "*att*.xls" files).
The folder with all the files and the "Consolidated webinar report.xls" file is at path "Z:P and S MEvaluationsWebinar series 2012-13TB".
I've got this code that will copy data into my worksheet from the most recent .IRP file generated on my C:/ drive. Along with copying the data to my worksheet, I'd like to have a copy of the IRP file copied to a folder on my L:/Drive.
In the code section I've commented out the code that allows the data from the most recent file to be copied to my worksheet. I found code that supposedly will copy a file to a new directory. I want to combine this into my code to allow both to happen. Here's my attempt.
I put together some code which at the end of it I am wanting to show in cell D1 the creation date for the most recently created file found.
View 5 Replies View RelatedI am trying to create a script for a manually morning process that I need to complete that entials downloading a number of .PDF files and sending them out to a distribution list. I am unable to automate that actual saving of the files onto the network drive, but I believe I can automate the process of attaching them to the email. I have run across some problems so far though, this is what I have been able to come up with. After doing a bit of research it seems as though using cmd would be the best way to locate and attach the file but I am still unable to get it to run properly:
Code:
Sub AttachMultiple()
With CreateObject("Outlook.Application").CreateItem(0)
.To = "test@gmail.com"
.Subject = "Test"
.Attachments.Add Split(CreateObject("wscript.shell").exec("cmd /c Dir 'G:Client ReportingMGIDaily
ReportsAGFAJune 2013*.pdf' /b /o-d").stdout.readall, vbCrLf)(0)
.Send
End With
End Sub
Here is an example of a folder I will be trying to pull the most recent saved PDF from, there are about 10 similar folders:
I feel like I am relatively close to completely this, my cmd syntax may just be a little off.
Is it possible to set the default page to open when clicking the file button? In particular, I use the recents feature a lot but never have I looked at the information on the information page. Everytime I click the file button I have to then select recents which is annoying.
View 5 Replies View RelatedI have a tool file which contains Excel VBA codes. When I click button it asks to select a file. I want that anytime I click the button the dialogue box should open in the folder containg the tool.,
View 1 Replies View RelatedThe code below looks at file names in column A and then goes to a folder and opens and copies the data in range c2 -lastrow from each file and pastes the data into sheet2.
how I could add to the code so that it also inserts the file name in column c?
It would make it easier to track the data in column B.
VB:
Sub CopyFromFile()
Dim fPath As String
Dim lRow As Long
[Code].....
I have attached a sample workbook. The list of file name is in sheet 1. An example of the output is in sheet 2. The data in column A is dummy data generally spans 100's of rows not just 10 as in the example.
The purpose of the code is to be able to put a list of file names in column a in sheet 1 and extract data from those files in a folder. The data extraction works fine. The reson for adding the file names is so that I know what file the data came from.
I am trying to figure out a way to open a folder through VBA. I just want the G: drive to open and then it lets the user navigate any folder within the G Drive and select which ever file they choose to open.
View 1 Replies View Relatedthis is my folder path:
\c06661Documents and SettingsptliDesktopPresentationDatabase Common Driver
\c06661: is my Full Computer Name
Database Common Driver: is my folder name
how can use the VBA code to access this path to access My Folder
